How To TURBO An E46! Exhaust & Intercooler Install!

Step Bit
Neiko 10194A Titanium Step Drill Bit, High Speed Steel | 1/4 to 1-3/8 | Total 10 Step Sizes … a.co/d/iX3kSnI
Intercooler Size 31x13x3
3 Inch stainless pipe
Squirrelly 3" Inch Stainless... www.amazon.com/dp/B079V7PZMG?...
Flex pipe
Vibrant Power 69834 Exhaust Bellows Assembly, Directional Flow Solid Liner, 3.00 in. diameter inlet, 3.00 in. diameter outlet, 4.00 in. Long, 321 Stainless Steel, Electropolished, each a.co/d/bmAvql2
Y Pipe
409 Stainless Steel Exhaust Y... www.amazon.com/dp/B07ZKKLTSW?...
V-Band
EVIL ENERGY 3 Inch Stainless... www.amazon.com/dp/B07439C4Z1?...
Waste gate stainless 90
1.75 Inch Extruded 304 Stainless Steel Elbow 90 Degree Pipe 11 Gauge a.co/d/b4jngPV
Wastegate
beracingtuning.com/product/pr...
Offset coupling
beracingtuning.com/product/hp...
Spa Turbo Manifold
beracingtuning.com/product/sp...
Engine Mount
beracingtuning.com/product/bo...
Turbo
beracingtuning.com/product/pu...
Drain hose
www.pegasusautoracing.com/pro...
Drain fitting
www.amazon.com/Natural-Alumin...
My tuner is Jules at Be Racing
Contact him on Facebook or Website / beracingtuning
Buy your turbo parts and tune at
beracingtuning.com
My Build Sheet!
beracingtuning.com/be-racing-...
Instagram @Hellrot_Garage
Thank you for watching and please ask any questions you have! Make sure to subscribe!

[@sebyouthere]

only series i look forward too

[@FrickYourHandle]

Please keep this going. You’re blazing the trail for so many future builds

[@hellrotgarage]

I will!

[@Vgk36]

Binge watching the fuck outta this series lol !!! Love that it's broke up into pieces. Way easier to find certain details!👍

[@hellrotgarage]

Thanks man, Iv considered doing a longer video of them all with all the main highlights in it.

[@agdwhite5421]

Your videos are a gift for the E46 community!! Thank you!!!

[@hellrotgarage]

Thanks man!

[@chadriddle3517]

Super cool build , keep the videos coming ! As a certified welder for 20years now , your S.S. Thin wall mig welds are not bad at all.

[@hellrotgarage]

Thanks a lot!

[@LUVKUZIXO]

Finally someone doing this to my exact same car (the automatic version and all) now I can follow exact steps, thank you man!

[@drewdavis239]

hot tip. pack / block the inside of the c channel bumper with styrofoam , (I used two small chunks each just inside the bolts that mount through my bumper ... otherwise the air can use the bumper to channel away from your intercooler /radiator. Also, plug in your o2 AFTER you thread it in or the wire is twisted

[@iplaycs3]

Just ordered set of 440cc volvo 1.9t injectors from the US, slowly buying shit up and getting ready to put on a turbo in the winter while I don't drive it. This is sooo fucking informative plus entertaining. I'm so glad your channel got recommended to me.

[@enrique-bz7cy]

Jesus dude you’re building this e46 faster than I’m even thinking through doing mine lmfao, I love the content!

[@cookingwithmeyself]

Woot cant wait to see the power you make

[@Dirtyz1234]

Glad to see some good views on the bottom mount down pipe. I was wondering about clearance, but glad to see it looks super simple. I have most of the parts for another AWIC system, so that's probably the route I'm going with on my setup.

[@stonesnell2568]

Good content man 👍 I enjoy all this e46 info

[@TheBimmerShop]

Everything turned out great 👍🏾

[@BrabusTKR]

Gotta say dude, as a new e46 owner these videos are an absolute treat

[@Mittis_bot]

I got an e46 build with a top mount and the welds on the downpipe are starting to go on the hot side of the turbo. I gotta fab up something like this... Love your videos because they just keep me going on my own stuff and you know what's up with these turbo builds.

[@thumperss79]

ive been wanting to do this top my 330ci for so long now and so far this is the best user friendly video yet

[@hellrotgarage]

Thanks man!

[@tweekedxxii2270]

YES SAFTEY THIRDDDD 💯💯💯

[@halversonsprojects7724]

Could paint the intercooler black if you want to keep the stealthy look

[@SHREDTOKILL]

After watching your videos ive decided to have my car tuned by beracing. I cant wait to rip it

[@hellrotgarage]

Do it! Tell Jules I sent you!

[@marcinbo5734]

Good job :)

[@hellrotgarage]

Thanks!

[@mikelbring]

Sent you a PM on FB. Had a few questions. Was considering the turn key turbo kit install from BE racing.

[@dominikkozela9763]

You can paint the intercooler black so it's less visible

[@M54B30_fan]

Not gonna say I’ve been swayed from a centrifugal/twin screw but… this is something i didn’t really think about. Also I have that same magnaflow #16533 funny enough my only mod.

[@rxwhat33]

You could Matt black the intercooler and you would barely be able to see it behind the mesh.

[@ramfisovalles720]

Hey what do you think about Stock pistons on boost proof rings and Athena head gasket

[@DrEvil-os9dc]

Love the vids. I have a 99 with the B28 . Been sitting on it for years to do work like this. Just got an aluminum valve cover to boost 20 hp. 😂 Going for the euro-spec. Secondary air pump/CCV/O2 sensor delete with tune from Bimmer world. Stroking to 3.0 might be cool too. Do you replace your crank and cam bearings?

[@hellrotgarage]

Get a tune from Be Racing!

[@DrEvil-os9dc]

@@hellrotgarage I’ll look into it! It looks like they tweaked the euro tune at bimmerworld due to US emission laws so they don’t delete the O2 and you need to pay for a “stage 2” for secondary air pump removal? Nty. I’ll take your advice and shop around. Thank you very much brotha-love

[@mohit8803]

what fan would you need to put on the other side of the intercooler

[@shaolincruz2891]

💪🏻👏🏻👏🏻👏🏻

[@cheikhtalibouya1]

I’m curious, what’s the purpose of keeping one lamda sensor?

[@jakemarkus5278]

What line are you running for oil feed?

[@savitar2978]

Would you suggest a turbo or supercharger for M54B25?

[@tomswope3039]

Did you have to trim the bumper at all to clear the intercooler? I’ve got the same intercooler you do (luckily the welds actually look good) and I’m having a ton of issues gettin the bumper to fit.

[@hellrotgarage]

No just make sure its far back

[@minzahhh1]

So you just used one of the upstream sensors and unplugged the other one ?

[@hellrotgarage]

Correct

[@Leviwiebe]

Would painting the intercooler black negatively affect the cooling of it? If not that would be a good way to hide the fact it’s boosted :)

[@sebyouthere]

you could powdercoat/paint it with heat reflecting paint

[@tribewu3223]

They sell them black already

[@e60_guy40]

No it’ll not affect if you do powder coat , a lot of well know companies sell powder coated intercooler and charge pipes

[@dydavid529]

what are you doing for ECU side? is it even good for meaningful boost? mine is about same I believe.

[@hellrotgarage]

Stock ecu

[@mikelbring]

Would all this be similar fitment with the PPF stainless tubular manifold?

[@bluejeansonfire6]

it'd be pretty similar, but the PPF mounts the turbo lower, the drain isnt quiet as easy, but it's similar, also gravity.

[@mikelbring]

@@bluejeansonfire6 Is there really any benefits of going tubular in this case? I read some where the cast create more engine bay heat. Say with a max goal of ~500whp.

[@jules7518]

@@mikelbring at 500whp? Not really. But that’s around the inflection point into which tubular starts becoming worthwhile

[@davidbeauvais1364]

Why is top mount bad?

[@hellrotgarage]

No ac

[@davidbeauvais1364]

@@hellrotgarage so to keep ac I need to bottom mount

[@kazern95]

no you can keep ac but you have to redo the ac lines custom and re gas it I still have my pump installed as i cbf taking it off

[@jokinjokerjokesgirl]

Are you willing to sell that down pipe??? I got no fab skills

[@hellrotgarage]

Message be racing tuning on Facebook