How to update a Yamaha Receiver with network.

[@AudioElectronicsChicago]

This Yamaha is a beast! It has a million of futures and powerful!

[@ColinGT]

Have an RX-V577 just tried this and went through all the steps once I clicked info to update it via network it went through verifying process then says Device Error ??? Any ideas or is there no further updates?

[@erwinargyle264]

Excellent video. Thank you.

[@dougdobbins6533]

That is super helpful! Thanks for doing it. (I assume that the receiver needs to be in the POWER-OFF state before beginning?)

[@nbsmedia1401]

Yes you start with it off then start the process!

[@johnlecoure164]

Awesome i did it on my new aventage and it worked!!!

[@plebmike8997]

Mine just says verifying forever.

[@LuisRendonAudio]

🎉If I don't have USB, do I update it via Wi-Fi? Or eterneth

[@josephmicciulli3034]

How do I shut off wifi so I can use a wired connection? Thanks

[@nogatco1]

Thank you

[@petrisorw950]

Hi There! Could you please be so kind to advise how to find the vTuner access code on RX-A750. I can’t find it anywhere, tried via manual and all the menus. Nothing. Would be much appreciated. Thank you!

[@Willmelendz]

Thank you sir

[@ricoalbarran8506]

Hello, just bought the speaker set up mic to calibrate. If I dint like the calibration, can I do it manually and how

[@Inmate533]

I have a Yamaha RX-V683. Is updating my receiver going to reset all of the settings to default? Also, do you repair receivers at all? Mine has something wrong with the 1/4” headphone input jack and it’s a real pain in the butt to get my headphones to activate the bypass when I plug them in.

[@jeffh4670]

Hi I tried that with my Yamaha RX-A750 and it says NOT FOUND. it is hardwired to my internet router Any ideas?

[@sammackay2623]

How to connect Yamaha controller app to Yamaha receiver

[@Quantum-Omega]

Mine will not give me an update up option when following these steps

[@isurufernando1976]

What is the advantage of updating firmware?

[@charlesm.9858]

Thank you for this video! I just bought a Yamaha receiver and I noticed it would have on the display Dolby Atmos... I got it from Crutchfield and they can’t even seem to help me..any thoughts? Thank you!!

[@panchomaresaltorf1111]

press the info button and it will display the codec it is using 👍

[@BaxxterBTC]

Hi, I have model HTR-4071 , in stereo the music plays without bass. I can't set it up. But in a movie where the effects are a blast, for example, it already has bass. Only when I play music so no bass. Don't know what to do?

[@briancardsfan]

You probably have your left and right switched to large. I believe you need to turn on "extra bass" feature which will use your subwoofers in straight mode.

[@troyheffernan1261]

Does the also work the same way on a RX-A3050 Yamaha receiver

[@termoclimas9684]

I have the RX-V667 (from 2012) with iphone dock, Is there a way to update via the iphone as a wifi receiver ?

[@olgaestrada5886]

Need to reset my Yamaha natural sound AV Receiver RX V579 to internet, how can I get it done?? Need help..

[@kishorek7610]

I have Yamaha rx1060 aventage . After updateing to 2.65 . When I play atoms movies . I am not able to see atoms name one Yamaha screen

[@panchomaresaltorf1111]

press the info button and it will display the codec it is using 👍

[@asanka689]

Dear Sir currently I'm using Yamaha Rx-A 3020 So i'm having kind of problem while playing Pure direct switch on and off automatically then all the DSP sound cut of and front panel blackout after sometime it's coming back to normal so this is does every times until I switched off and rely disturbing please advice me what I must do??

[@gio3218]

I got a Yamaha natural sound Av receiver rx-v373 how too update it???

[@skeet5150]

would this solve bluetooth issues? my yamaha stays on please wait message in bluetooth mode.

[@nbsmedia1401]

This basically refreshes everything as well so that might work. It definitely doesn't hurt anything.

[@bobbys7798]

I have the RX-V481 and having a hard time playing 4k video and 5.1 audio. Are there any suggestions

[@rajaduraisangari]

Dear sir, my Yamaha rd-v671 USB drive cannot play the video. What need to do, play only audio song only?

[@kathleenmahon9598]

We change our wifi from comcast to verizon. We can not figure out how to change the yamaha rx a2060 wifi from the old wifi to the new.

[@MrRockon94]

Do you know how to fix error code 201? I am not able to open spotify or pandora any longer. My yamaha receiver is not listed as a device to listen to. Thanks.

[@JoeySkoots27]

What's the point in updating it?? It just plays music right?

[@yapTheReal]

Sir i'm having a problem connecting my phone to the receiver via bluetooth. The bluetooth of yamaha rx v485 is not searching device even if i already pressed the bluetooth botton and then the memory botton for more than 3 sec.. I already set up the bluetooth setting of the receiver but still no avail. I hope you can help me with this one thanks.

[@chamanverde]

Hi. I have the same problem. Did you find any solution?

[@LovenPeace2]

Me too ?

[@ricardodelriego4013]

I have yamaha rx-v685 when I click input to select Bluetooth it doesn't say Bluetooth anymore it says net radio on top and under says not connected?

[@thechronic6708]

Hi after resetting my receiver the red standby light no longer goes on, do u know how to fix this please?

[@hasankakal]

After successfully usb update it still shows usb update. Every time I switch on it shows usb update

[@jesusfernandez3951]

I have a Yamaha R-V1103, can this model ve updated as well

[@iliqnevtimov7919]

I try is for my yamaha, not connection of internet and now is not turn on, how to fixed?

[@haystackhider7158]

Thank you for brilliant video! I have a RX A 2010, and a (E-10 Internal error) on display. I have internet.. Is it possible to fix it? Edit: If I plug in a USB cable into my laptop with internet.. will it fix itself? ..or do I go to a website somewhere? Thanks.

[@markdearborn2514]

I get a message that says, file not ready.

[@tonyboycabahug4925]

Hello sir, i try to update my Yamaha Rx-V475 but it appears DEVICE ERROR. Do you have any idea please. Thank you

[@pavitrayenagandula8546]

Power section problem how to solve Yamaha

[@chamanverde]

I have the RX V685 a few months ago and it has worked well. However, since yesterday the bluetooth doesn't work. When I select this function, the bluetooth symbol does not appear, and the worst thing is that the bluetooth cannot be recognized on my devices (tv, cell phone, among others). I don't know what is happening. The antennas are good, it seems. I cannot connect the music cast either. I pressed the memory button for about 10 second but it doesn't work. Do you know how i cant reactive the bluetooth function? Thanks for your support

[@mattman9232]

Use remote an hit bluetooth then hold memory for 3 seconds

[@ebrahimcarelse2670]

I have the exact same issue with my RX V585. USB doesn't work, cannot access/detect wifi and the Bluetooth doesn't work either. When selecting Bluetooth it displays on the display but cannot detect any devices, same with the USB. It cannot even detect my home WiFi and my antennas are in perfect working order. Please help

[@thomassanchez8682]

Hi, my screen went completely black…is there a reset button?

[@roberttoth6610]

Went from ethernet cable to wireless. Wireless does not work. Following your directions; network update; does not go past verifying. Software version 1.8, system ID 03BF2FE3. Dont remember if ever on wireless. Is activation possible or came w/o wireless

[@nbsmedia1401]

There is a different way of still installing the update, but using USB drive on the front

[@roshyclt13]

The panel buttons not working properly need to reset and update… help me

[@davidarevalo5150]

What about fixing Errors

[@KokykokyPb]

Tengo un sinto Yamaha RX-5790 con 5 parlantes PolkAudio y un sub PolkAudio conectados. En los últimos días tengo el sig. problema. Cuando estoy reproduciendo una peli o serie en algún momento se corta el audio de todos los parlantes, desapareciendo la imagen con los 5 parlantes del display del sinto, volviendo a la normalidad en algunos segundos. Luego lo vuelve a hacer de manera aleatoria, lo que es muy molesto. Cuál puede ser el problema? El equipo no se apaga, solo se corta el audio y vuelve a los pocos segundos, para después (sin ningún patrón predefinido) volver a cortarse en otro momento. Así todo el tiempo. Espero su ayuda!

[@flamemojis]

How do you connect the reciver to a network so it can update?

[@flamemojis]

I followed the steps and it all worked out smooth. I have the v-477.

[@dontran236]

I have AT&T Wi-Fi Ethernet Yamaha update Ethernet said Not Found.

[@efripinoresurreccion180]

My yamaha rx v383 is not update .not working

[@piscesleo170]

why do I get file not ready

[@yapTheReal]

Same here bro.

[@spectergadget248]

How to remove paired devices from my ex v-383

[@ramonwernet]

How to connect phone on yamaha?

[@tiiago7645]

Doesn't give me the network option

[@2punchtv636]

HELP....I continue receiving Device Error upon updating

[@kennethjohnson5639]

I got a Yamaha it clicks on and shuts off HTR-6130 amplifier

[@billhamilton7524]

its top left and button is different than 385 ,,,this does not work on the 385 ,,

[@delacuevaterriers]

Help my amp Stay S6 erasing 😢

[@ramonwernet]

It said not connected

[@dontran236]

Said Not found. What wrong

[@brianoneil5629]

I am getting a device error

[@Lordismyshepered]

That did not worked

[@kishorek7610]

I have Yamaha rx1060 aventage . After updateing to 2.65 . When I play atoms movies . I am not able to see atoms name one Yamaha screen