How to use a CV Boot Band/Clamp Tool

Рет қаралды 139,378

gansitoheimperformance

Күн бұрын

Пікірлер: 63

@uranodas 10 ай бұрын

Right on IV been trying to do one at work and all they had was a crimping pliers thanks that is a good video

@dawson91b Жыл бұрын

Thanks man. I bought a repair kit and the tools knowing nothing but KZbin would come through and guide me to success. Lol just fixed a boot on my side by side. Well done.

@bohlempire9537 4 ай бұрын

Excellent demonstration, very clear and concise explanation👍

@brucehutcheson5371 2 ай бұрын

Great video. You did an excellent job of explaining and describing how to use that tool properly.

@ozdriftr 11 ай бұрын

Thanks man, was ages since I had used mine needed a refresher. Cheers!

@cellphonelightsaber 2 жыл бұрын

Thanks for telling me I have the wrong tool! 🤣

@Alex-po3rr 2 ай бұрын

Awesome dude, thank you very much for explaining it in detail!

@Ryan-yv1gb 2 жыл бұрын

You can also take a center punch and punch an indent where the strap folds over

@brendandemjanec5737 2 жыл бұрын

This is a good idea, it will really mesh the metal, just dont hit so hard as to break it lol

@marsar96 11 ай бұрын

Thank you for making this video. It helped on a 2019 Polaris ranger.

@johnnyjimj 3 ай бұрын

Very nice info that was missing from my tool kit. Unfortunately, the tool was so poorly made the tightening handle fell off at first use and the cuttintg tool had such a mushy edge it simply wrapped the strap around making a big mess. I found I could make a better job using vise grips and regular cutters!!!

@iamionman2 11 ай бұрын

Nice video man! Very helpful. Thanks!

@Ryan-yv1gb 2 жыл бұрын

That intro had me like 🎬 Roll 1, Scene 1, Take 1,2,3,4 🎬 lol.

@jeffryblackmon4846 3 жыл бұрын

I have subscribed after watching this very helpful video. THANK YOU.

@wellsyaknow 10 ай бұрын

thanks for the video very helpful..but didnt you say that you wanted the band to go the other way so it didn't catch things ? edit* cancel that ...i getcha

@brendandemjanec5737 2 жыл бұрын

i dont have alot of HF tools but i will always have that mini ball peen hammer that thing is awesome and 3 bucks

@careyautorepairs 14 күн бұрын

Cool video brother 😊

@pppaaa5399 2 жыл бұрын

Exactly what I wanted, thank you!

@salimmetin 8 ай бұрын

Good job, well done! Is it really necessary to use special tool to make the clamp tight? Or should it be possible with 'standard' grap piliers..?

@dantheman1337 4 ай бұрын

grease will leak out if it is not tight enough so you'll find out

@xs11cruiser Жыл бұрын

Can you use this in place of a hose clamp on a radiator hose? In other words will it seal pressure up to 9 psi?

@JacopoSkydweller Жыл бұрын

Absolutely not. It will not last if it works at all. Why wouldn't you just buy a proper hose clamp? They're so cheap and readily available at any auto parts store.

@xs11cruiser Жыл бұрын

That is exactly what I assumed because they are not wide enough and that rubber hoses will crush over time and come loose. standard hose clamps are unsightly in my view and tend to rust somewhat due to low grade stainless steel. Just wanted to query and see if others have used them in this way. Constant tension clamps are still the best option in my view because if the hose squashes they will still maintain tension.@@JacopoSkydweller

@Gizmo1992 7 ай бұрын

@@xs11cruiserthey use the spring clips for a reason, its because they expand and contract using these or jubilee clips don't let them flex and still keep tension, I've seen it happen when they have caused pipe connectors to crack

@LuisC202 3 жыл бұрын

THank you for the great video on how to use a band tool. Subscribed my friend nd God BLess

@daviddoherty4429 3 жыл бұрын

Thanks very much very helpful and easy to follow

@freedomeagle-q2p 2 жыл бұрын

Good stuff my man

@MrRGM10 8 ай бұрын

Os this better than the other clamp thing where it hooks

@gansitoheimperformance271 8 ай бұрын

There both just as good in my opinion

@charlestackett7137 3 ай бұрын

Thank you. Very helpful.

@jimmystone-f4e 3 ай бұрын

Cheers man 👍

@ezzzzrrrs7646 Жыл бұрын

Thanks...exactly the vid i needed

@Biblija_ 2 жыл бұрын

Благословений свыше!

@romelmortos495 Жыл бұрын

Thankz for sharing to the other..thank you sir

@jadem5238 Жыл бұрын

Cool good video very useful thanks.

@ruslanbeletei2384 Жыл бұрын

Many thanks mate!

@Jordan_0121 5 ай бұрын

Very useful!

@Ryan-yv1gb 2 жыл бұрын

You were saying what way to put the band on for the rotation of the axle and then when you put it on your axle, it was the opposite way. Am I the only one who caught that?

@Ryan-yv1gb 2 жыл бұрын

Still a great video on how to use the tool.

@itsjordo 2 жыл бұрын

Note that it was the inboard side and he flipped the axle around so he did it the way he said he was.

@streetstyle9200 Жыл бұрын

He said if you are OCD you can do the rotational way but it’s not necessary!!!!

@anthonyfranco1611 2 жыл бұрын

Nice video dude

@nonyabiz2777 Жыл бұрын

Nice work.

@gottosahani7571 Жыл бұрын

Thanks for the video

@markhumphries5478 2 жыл бұрын

Great video.

@blackenigma1054 Жыл бұрын

Thank you 👍🏿

@alexandrumihaioltean2374 7 ай бұрын

God bless brotha

@QadamNahkal 3 жыл бұрын

Helping people.

@rudymartinez9976 8 ай бұрын

thank you

@rtwynn24 11 ай бұрын

As Denzel Washington said in training day My Nigga

@ksk5517 8 ай бұрын

Good verbal instruction, but it was visually hard to see due to shadow covering the tool, lighting was low, and video shot a little too far from the tool.