How to use Bondic Video

[@sierratrey]

It’s amazing how that stuff works when you do it the correct way. Too many people on KZbin bashing bondic whether due to their own agenda or because they were too impatient. I love this stuff!!!

[@dawnb4295]

They don't clean or prep before bonding.

[@patrickm.8425]

@@dawnb4295 Really?... Tell this guy that: kzbin.info/www/bejne/sJOckqp8pMSEg7c

[@terry32]

A much better review than many others I have seen . The one other thing you should mention is that , after sanding , you ought to wipe clean with acetone or isopropyl . Then , you should keep your fingers clear of the area . the slightest contamination from your skin can affect results .

[@force3dfx]

Used it to seal small leak in copper pipe, will go back and get all the way around. Worked great and can see it being useful in one of my other hobbies Warhammer 40K, will use to build custom peices and connect things that werent meant together to make custom models.

[@courtsketchartist]

Will Bondic adhere leather to leather?

[@billlowe6995]

Just a caution. You DO NOT want to get this stuff on bare skin. In fact, instructions say to wash it off immediately with water if skin is exposed to the liquid. From lengthy experience using this in LED lighting of diecast cars,it can cause terriffic itching and is very difficult to remove from your skin is allowed to dry or gets hit by the UV light. I ALWAYS wear nitrile gloves when using it. Other than that, it is a great product if used propperly.

[@steveelgersma3589]

Would this work on something that has a bit of torque placed on it when it is in use, such as a plastic clamp on a pole saw that stops the pole from sliding and adjust the length of the pole? The piece has a screw through it that you tighten to another piece that tightens the grip on the pole.

[@projet2907]

How much plastic is in there and what happens when empty ?.

[@jamestone265]

Will it bond aluminum parts together...how about steel?

[@attygarland6909]

Speaks loads the fact that Bondic has turned off comments on their own KZbin ad video, I would think.

[@REDMAN298]

Not thrilled with it. Mine doesn`t have the applicator like he`s got here either. Just the open tube when I take off the cap.

[@timcarlton5704]

I’ve tried using this on model cars mostly, and everything I’ve use it on hasn’t held, it’s doesn’t weld nothing, it more like a cold glue, or a colder form of hot glue, I have had to repaint two model cars completely car the glue didn’t hold the joints. I have one more refill left, am reviewing the paper instructions and watching some video,. I can almost guarantee fix the ear piece on the glasses won’t work, well it mite if you never wear them, or maybe a hour to find new glasses. Well here we go again, trying it again.

[@thepianoman5491]

People with an incredible invention don't use KZbin as their marketing platform. They patent it & get it in the big retail stores. People, don't be sucked into this. When they say it's from Australia beware. Starscope, crypto currency etc.

[@LivingFaith2]

It's neither a glue nor a welder. It doesn't penetrate material as a welder does.

[@dawnb4295]

Can you add color to it so it matches?

[@WestonMorrisdoBrasil]

The FAQ on their site says that you can add powdered coloring to the plastic while liquid before hardening it with UV. I have not tried this. Just sharing info... notaglue.com/pages/frequently-asked-questions

[@billm7000]

do comments work here?

[@mikel4510]

No

[@jstl7957]

This is a "DUHHH" but you don't hold the only licence to it. It's a big boat. Try this test... As you did in the video, count to 4, i.e., 1... 2... 3... 4. But before you start, hold a stopwatch and, without looking at the watch, press the START button as soon as you begin counting. Press the STOP button when you reach 4. Now look at the stopwatch. What??? ???? It says 3 some odd seconds and not 4. ????? Why? "I don't understand? I'm so confused." This is a good time to say "DUHHH". When you started counting at "1", the stopwatch started counting at "0". When you say "1" you are implying one second has already passed when in fact , no seconds (zero/zip) have passed. That is why the stopwatch shows "3 some odd seconds" when you have verbally reached 4 seconds. This is not rocket science but when you count, you have to start at 0 (zero). I know, I know, this may be hard for you to grasp but this is pure logic. But don't be too upset because many people do and think logically like you do. However, one reason you may be a bit rattled is to know this lesson in logic is being taught to you by a girl. I rest my case. :-) GIRLS RULE!

[@jstl7957]

@Lexter Nice try but pretty weak and hardly logical.

[@SevenDeMagnus]

Cool

[@IdoZatTimeInaVan]

Note to presenter: When you want to count actual seconds, you say: 0-two three-1-two three--2-two three--3-two three--4. NOT 1-2-3-4 as many ppl do and then they say the glue doesn't work.

[@voodooman4636]

I know right! I mean they probably didn't even have their tongues out as they counted. Geeze.

[@anotheruser9845]

"Don't worry about getting this on your hands" is VERY bad advice. I have been in significant pain in my finger tips for the last month due to using a similar product "5 second fox". Dr diagniosed contact dermititis. Use latex gloves.

[@rikmiles6531]

I can’t see nothing , you need a better zoom

[@JanMelet]

Bondic you really need to know how to use it

[@christinet.4159]

And it's not really that easy or convenient to use. I tried it on a broken plastic "runner" for a refrigerator drawer, I couldn't really sand it or easily get the bondic pen in the correct position to get it where I needed it.....,unfortunately, it was a waste of time and money for what I needed it for.

[@mottthehoople693]

everything in life is complex...To do anything worth doing you need to know how to do it in the first place...so many dumbarses want to do complex things without applying themselves....it should just happen because they want it to happen...

[@natalivelikanov6777]

I just saw a video where it works........................FOR 3 DAYS!

[@marioalviar1]

This doesn't work good compared the way it was demonstrated. It works but not as strong as i thought. It is just like ordinary glue but might work good on other things. I don't know...I just wasted my money for this...

[@attygarland6909]

A little too "slick" of a presentation ... seems more like an AD for Bondic than a candid, spontaneous review. Is this one of those "compensated" reviews?

[@MrZxooxz]

this is a scam ! shame on you !!!!

[@Gingernut50]

aA joke-2 months still not delivered!!!Dont touch this company-I will never buy from this company again!!!!!