How To: Whirlpool/KitchenAid/Maytag Dispenser Assembly WPW10224428

How To Replace: Whirlpool/KitchenAid/Maytag Dispenser Assembly WPW10224428 www.appliancepa...
Symptoms: Something shorted out or failed internally; you have to change out the whole assembly.
Tools: Torx 15 screwdriver, 3/16” nut driver, flathead screwdriver, a small piece of tape.
This Whirlpool/KitchenAid/Maytag made Dishwasher Dispenser Assembly replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, and Kenmore Dishwashers: W10224428, 8565814, 8565816, W10195169, WPW10224428VP.
Buy the new Dishwasher Dispenser Assembly WPW10224428 here: www.appliancepa...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepa.... We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros

[@Sig220Euro]

Thanks for the vid. I watched it and then referenced it to swap my dispenser unit. Was easy. Only thing is I did have a leak and had to remove the door skin. I hadn't tightened the 6 screws holding the module in tight enough to compress the gasket. I was hesitant to tighten them to much for fear of cracking the plastic but turned out I was a bit over cautious.

[@appliancepartspros]

+Sig220Euro Glad the video helped you get the dispenser changed!

[@jasonsims007]

That's a hell of a gap between the inside of the door and the new assembly. The original installed unit fit was flush this unit once completed on your video showed a pretty good size gap for water to get into.

[@lowhertzhighspl]

Only gap I saw was when he snapped it in BUT he had yet to screw in the screws. Maybe you didn't watch the entire video.