How To: Whirlpool/KitchenAid/Maytag Motor Brush Holder 4162546

[@nathanschleifer9422]

This is an incredible video. Extremely precise, correct and helpful at each step of disassembly and assembly. Thanks!

[@screammember]

Best kitchen aid repair videos by far, super clear and straight forward explanation of every single detail! thanks !

[@lauriejo5610]

I really like this guys instructions. NO wasted words!! Love it.

[@appliancepartspros]

Glad the video helped you get the mixer fixed!

[@mattbaker6782]

Very thorough and got a good Pace thanks I appreciate it

[@nelliyarseva7657]

Огромное спасибо! Это самый лучший ролик по данной теме, потрясающее качество сьемки и подробнейшее содержание.

[@innocent_fugitive]

Thank you sooooo much! I bought new brushes but the brush holders had some grit stuck in them that was hampering the movement. I followed your instructions and was able to take them out, clean them and put in the new ones. Now I have my +25 year-old Kitchenaid back and I'm so happy!

[@joefish1498]

You're video's always make me laugh. You say it's not difficult. Not difficult for who? If you have viewers that require instructions to remove the beater and bowl they should be advised not to go near this project. That being said it is the best video I've seen on this machine. With this video alone , and a little know how, you can service every part on this machine. Well done.

[@katarzynanatalia4523]

Buongiorno, primo video fatto veramente bene, preciso e chiaro in minimi dettagli.Grazie.

[@appliancepartspros]

Di niente! Siamo lieti che tu sia riuscito a risolvere il tuo problema! Se c'è qualcosa in cui possiamo aiutarti in futuro, faccelo sapere.

[@katarzynanatalia4523]

@@appliancepartspros Sono una ragazza polacca che vive in Italia, sto cercando pezzo originale di ingranaggio di 32 denti,ma non lo voglio in plastica solo originale , mi può mandare link dove posso acquistare.

[@appliancepartspros]

Mi dispiace, non effettuiamo spedizioni internazionali. Potresti dover verificare con il produttore per trovare un distributore locale di pezzi di ricambio da cui ottenere il pezzo.

[@katarzynanatalia4523]

ok.grazie mille .

[@appliancepartspros]

Prego!

[@CarlosRRT]

Thank you, very well explained!

[@RichardDDixon]

Awesome. I am good at figuring things out, but some details I would have missed. Thanks

[@maryam3107]

This video is great, it explains everything so in detail. I have dissembled my Kitchenaid artisan because the plastic push rod melted and the speed control didn't work anymore. There was still electricity but once I changed it assembled it again with the replacement, somehow there is no electricity whatsoever. What could be the reason?

[@appliancepartspros]

What is your model number?

[@maryam3107]

@ ​​⁠it’s the kitchen aid artisan. I bought it two years ago. It’s pretty new. The grease is white

[@appliancepartspros]

Unfortunately, without the model number we are unable to look up specific information for your unit. We can provide basic information. You can double check that the correct part was ordered and installed. Then double check the installation of the part to make sure it was installed correctly. If that is good you will need to check for damaged or loose wiring.

[@gabrieleteich4046]

Thank you thank you thank you! It's all fixed! Great video, great help.

[@appliancepartspros]

Glad the video helped you get the mixer fixed!

[@julioacosta5592]

Excellent instructions.

[@appliancepartspros]

Thanks, glad the video helped you get the mixer fixed!

[@markhodges5225]

One of my brushes is stuck in the mixer and won't come out. Suggestions?

[@heszabo4]

Thank you for the video! I received a ksm90 model that did not turn on. After replacing the motor brush assembly, I was able to get power, but only when the lever is on the off position. The motor doesn't work when the lever is on any of the actual speeds. Any idea where I went wrong?

[@heszabo4]

I put part of the speed control lever back in backwards in case anyone comes across this same problem...

[@2010stoof]

Do the bowl lift mechanism rails need to be greased?

[@colindonahue9937]

I have this exact mixer. When mixing dough speed 6 thru 10 Dosent change when before it use to change. Do you think the motor is going bad? Thanks.....

[@appliancepartspros]

We'd be happy to help you figure out what's going on with that! We offer free technical advice and diagnosis. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need your model number to give you accurate advice, which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx

[@EternaluBUrgess]

I have one speed that work on my mixer when I open the back up the wire don't look like your wiring on the one you doing I have wire nuts on mine how can I have it fix?

[@gizzyguzzi]

sounds like a K5a. pre solid state

[@messykitchen007]

May you know what's wrong with my heavy duty? When I put the plug in, it doesn't turn but it makes sounds... when I turn it on it only goes fast.

[@appliancepartspros]

Without knowing what you have, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/

[@gricelserrano5383]

Mine buzzes when it is plugged in. Any ideas why?

[@catd6235]

My speed at 8 to 10 is the same speed, any suggestion?

[@appliancepartspros]

Without knowing what you have, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/

[@francescomarini774]

Hello, by mistake I used my 110v Kitchenaid in a 220v. Now its not working anymore. Do you think that I will need to change the motor? Thanks for your help

[@appliancepartspros]

You would have to test every thing and find the part that failed.

[@catherinetoth4719]

Hello. What do I do if I removed one of the brushes without marking it's orientation?

[@appliancepartspros]

You can also put the brushes back in based on where the little notch is cut out, as explained at 12:50 and 13:20.

[@appliancepartspros]

It's also demonstrated at 27:20 and 27:51

[@apostolosziangalos6487]

ευχαριστο

[@appliancepartspros]

χαρούμε να σας άρεσε το βίντεο!

[@ElGoogKO]

Based on the huge price of a kitchenaid mixer and reputation of it, the fact that it still uses a brush motor is appalling and outright scam. Buyers believe they receive a great product when in fact they receive a severely outdated one, but nicely polished on the outside and using the image made half a century ago, when that product was first made.

[@gizzyguzzi]

I'd rather have a serviceable motor like this. But they do make a brushless motor that you can just throw the whole motor assembly away. I'd rather buy an old model, they are serviceable indefinitely.

[@gizzyguzzi]

This is a good video for complete disassembly. I don't think it's necessary to pull the planetary and break the two halves of the machine apart to get to the brush holders. You can just go in from the rear end and pull the armature. You can reach the coil wires with needle nose pliers and remove the coil, all from the rear.

[@appliancepartspros]

Thank you for the tips. Some models you may not be able to do that. Our videos are just to help give a general idea on how to do the repair.

[@alann3805]

Can you get to the brush holders on a K5SS from the rear without pulling the planetary?