How to - Wilks USA petrol/gasoline pressure washer oil change

[@HILUXCHAINSAW]

Stop the vid at 1.51 and you'll see to the left of where the oil came out there is a bolt . You can see it between the wheel and the engine mounting rubber. This is the sump bolt, undo that and the oil will flow out without having to tip it and it should come out without going on the machine. You will be able to get your tray under there and catch the oil if you raise it up off the ground. EDIT, using the sump bolt also flushes out any swarf that's built up right at the bottom of the engine.

[@KernowGarage]

thanks for the info! didn't spot that when I first did it.

[@francisgallagher2290]

How do you empty the pump oil ????

[@treilly39]

@@francisgallagher2290 Francis I’ve got a TX 850 I no that’s a wilks 750 , but unfortunately you have to tip it like the man did in the video, should be a nut or something but theirs not mate .

[@JozefNeznam]

the springs fell out, I don't know where they belong, can you take a couple of photos, thank you

[@theUrbangh0st]

You should cut a hole in a pop bottle for the drain & fill up .works great on motorcycles

[@KernowGarage]

that's a good idea, thanks!

[@security-pb4ee]

Many thanks. Are you still happy with it? Is it good to remove weed for paving black

[@kellyshirley9853]

Hello! Do you need to empty the petrol too? If so can you do a video on this please?

[@KernowGarage]

you shouldn't need to empty the petrol unless there is enough in the tank to spill out when you are tilting the machine.

[@paulstephenson2875]

It’s vented cap don’t fill the petrol too much all will do it

[@KernowGarage]

Hi Paul, I was having issues with the cap leaking with the fuel just over half a tank, i found that removing the strainer that comes under the cap solved the issue completely.