How to wind the bobbin, thread the needle & basic sewing on Singer Model 347

[@pihakamera]

Oh my god! For all my life i have been threading wrong, i have never used that last slot just before needle, i must try it right now! PS. Here is small video showing the difference kzbin.info/www/bejne/fZ-yp2OPjpmKq7M

[@andytubesewing1953]

Yes if you have one please do use it it can make a bit of a difference especially if you're sewing knit fabric or stretch fabric I think it just helps keep the thread lined up and there is less slack in the thread after the hook pulls it around and the take-up lever starts back up anyway thanks for watching and good luck

[@pihakamera]

@@andytubesewing1953 i made a short video of that, if you find it useful you can share it, it's kinda interesting.

[@andytubesewing1953]

How much would you charge to film my videos? Your video is brilliant! Nicely done. I loved your comment and pinned it to the top. I've been told I could "embed" your video in one of mine, but don't know how to do so. I do know how to attach a link to it at the end of my video though. I usually make a "how to thread" video for each model I work on, and when I do I will link to this video. You are kind to take the time to share. Thank you.

[@pihakamera]

@@andytubesewing1953 I will certainly help you the way i can and shoot videos if it's possible with this 337 model. What video editing software you use so i can think that embedding?

[@andytubesewing1953]

@@pihakamera It is Corel VideoStudio X5 Pro. 5 years old software. Just do your thing on your channel and I'll be happy to put a link on my channel to your videos. Thank you. Take Care.

[@TheGardenKitten]

I know this is several years ago, but I truly appreciate this video. Thank you

[@andytubesewing1953]

I still monitor comments, and it was kind of you to leave such a nice one. Thank you. I'm glad the video was helpful

[@lindagieseler9566]

My 347 and I thank you. Very helpful video

[@andytubesewing1953]

Thanks very much for the comment. I appreciate it 🙏 EDIT: If needed a FREE copy of the instruction manual is at this link on the SInger Support Page: www.singer.com/search/support?title=347

[@tpiapb]

Thanks for the help! My grandmother passed down this machine she had it since she was a teenager. It was her prized possession. Now I can tell her I know how to set it up and make a stitch

[@andytubesewing1953]

A very nice heirloom. Family owned machines are the best, IMO. Happy sewing, and thanks for the nice comment.

[@vickicunneen6290]

I just purchased this machine for my daughter for $30. I was not even sure if it worked but I was willing to give it a chance. I remember similar Singer machines from my childhood - they are so simple and basic! There were two things I could not figure our - how to reverse and how to thread for making a bobbin. Thank you for this video

[@andytubesewing1953]

Thank you very much, Vicki. Those are kind words considering the quality of the video. One of my early efforts. I'm happy people still find it useful. I'll also mention that, if you'd like to, you can download a FREE copy of the original Instruction Manual from the SInger Co. at this safe link: www.singer.com/search/support?title=347 While we all like videos these days, the 52-page manual covers all the controls on the machine and how to use them, charts for needle/thread/fabric usage, sewing techniques and how to keep the machine lubricated. Thanks again for watching my channel. 🙏Take care.

[@migi3976]

I am brand new to sewing and I recently got this same machine handed down to me from someone I know, so this video is certainly very helpful, I appreciate it. This machine is ideal for the projects I have in mind once I learn more about sewing and tailoring.

[@andytubesewing1953]

It's a nice machine for home sewing and crafting. You can download a free copy of the original Instruction Manual from SInger at this link: www.singer.com/search/support?title=347 There is a section on maintenance and oiling, (please oil it) all the settings and their use, how-to pages for seams, darts, buttonholes, and much, much more. 52 page PDF Happy sewing and good luck.

[@migi3976]

@@andytubesewing1953 Thank you for this, I also had a question. Do all of Singer’s needles fit into this machine? I was planning on buying some Singer needle packs soon. And is it the same for other brands of needles?

[@andytubesewing1953]

@@migi3976 Your model 347 machine uses 15x1 needles in sizes 9, 11, 14,16 &18. They come in different types like sharp point, universal point, ballpoint for stretch, jeans needle, leather needle, and for metal thread. There is also a nice top-stitch type. Many companies make 15x1 needles like this. Many people feel Singer needles do not have the original quality any longer. My wife prefers SCHMETZ brand lately and likes using the top stitch type b/c the eye of the needle is larger (easier to thread) jeans needles can also be called "heavy-duty" or "for thick material".

[@migi3976]

@@andytubesewing1953 Thank you so much I really appreciate this, I'll defintely keep this in mind and I'll be sure to look into those needles that you mentioned very soon.

[@andytubesewing1953]

@@migi3976 👍

[@Vallyy77]

I just bought this model of sewing machine and the explanation of this tutorial I found very clear and efficienti

[@andytubesewing1953]

Thank you so much Valeria! It is a very nice machine and I can imagine you will be making some beautiful Fashions with it.

[@ThePeterEffect]

So your video just saved me 110$. I picked up a Singer 347 for 40$ and I was having no luck getting it working and assumed that there was a mechanical component failing. I was ready to give up and buy a new beginner singer when I found your video. I'm now sewing and super happy about it thanks to you! Much appreciated!

[@andytubesewing1953]

Thank you for finding a way to save that machine and get it sewing! It's a better machine than that $110 model anyway. When your 347 was new, about 1966, it cost around $1200 in today's dollars. You got a very good deal. Take care.

[@craigharvey3890]

Having watched your restoration videos of this machine (excellent loved them) I decided to buy one of these I fell in love with the colour and style of it, picked one up for $15 it runs like a dream easiest sewing machine I have ever used I love how precise it sees and in such straight lines. Thank you for explaining the threading and how to disengage the needle when filling the bobbin, you are so great at explaining I didn't even need the manual that came with it. All of your viewers including me so appreciate your knowledge, thanks again Craig.

[@andytubesewing1953]

Thank you very much Craig! Can you believe just $15 for such a great machine? You got a real bargain. It is a very sweet model and does sew really nice. I know you'll enjoy it and I'm happy people do feel encouraged to find and use these vintage machines. It was kind of you to let me know.

[@craigharvey3890]

Andy Tube Well I was so grateful when you helped me out with the Singer Genie the other week, I have always been a little scared of sewing machines, the daunting task of trying to remember how to thread the machine used to put me off using it, but you have taken the fear out of it for me. My new to me Singer 337 I just feel like it was made for me, it doesn't mess about it just works.

[@andytubesewing1953]

It is really enjoyable to hear comments like this. I always wonder if people will be truly helped from my videos. I am grateful for people who post help videos b/c I have learned from them, so just trying to pass a little experience on to others.

[@pinksnoopydancer]

Thank you. I recently purchased this machine and can now thread and sew because of your videos!

[@andytubesewing1953]

I'm glad you found the video. You can download a free instruction manual from the Singer Support page here; www.singer.com/search/support?title=347

[@pinksnoopydancer]

@@andytubesewing1953 thank you!

[@andytubesewing1953]

@@pinksnoopydancer 😊👍

[@abelincoln95]

Thank you, Brother.. I was just given a Singer Merritt 1873 model. I have never sewn before & I have no manual for the model I have. Your instruction was just what I needed to know.

[@andytubesewing1953]

Honestly, Abe, it was kind of you to let me know. BTW, you can download a FREE pdf copy of the original Singer Instruction Manual for your Model here: www.singer.com/sites/default/files/product_manual/SINGER%201803_1853%20and%201873%20Sewing%20Machine.pdf Stop by whenever you can. Take Care.

[@acyanotypeguy1795]

Amazing clear video, your passion for these machine really does shine!! Thanks Andy

[@andytubesewing1953]

Thanks 👍 for commenting.

[@limeykl]

Was having a meltdown trying to bring up bobbin thread. You were a big help. Was given a 1968 singer. Runs great now.

[@andytubesewing1953]

I'm embarrased at the quality of this video. An early attempt. I feel less ashamed of it after it helped you, so thank you very much.

[@u1u9]

Very helpful. I just got my aunt's old 348. it came with no accoutrements or instructions but SingerCo offers a PDF on their site. I'll be watching this video repeatedly, for sure.

[@andytubesewing1953]

Thanks, and congrats on your "new" Model 348! Here is a link to a playlist I recorded of a Model 347. It's a rags-to-riches story you may like, with some tutorials also: kzbin.info/www/bejne/ZmWkf2B8jJx3sKM I'm just starting a playlist of a Model 338, the prior version of your 348. You may find the comparison interesting: kzbin.info/www/bejne/moPGhJ2Pq7eKmbM Hope you enjoy your new blue beauty. Thanks for the comment.

[@cyrillepennavaire5623]

Very helpful video! The only one you will ever need to watch to get your Singer 347 up and running. Thanks a bunch!

[@andytubesewing1953]

I'm glad if it helped. Thanks.

[@PlanetCreativeStudios]

Thank you for this video! I needed to SEE how to thread the machine and the bobbin and this video was exactly what I needed!

[@andytubesewing1953]

I'm glad you found the video. Happy sewing.

[@PlanetCreativeStudios]

@@andytubesewing1953 could you have imagined when you posted this video 5 years how many people would benefit from your work. Keep up the great work!

[@robertw9510]

Very simply demonstrated with no rush so it can be understood

[@andytubesewing1953]

Thanks for watching, Robert. I appreciate your comment. If you need a manual you can get one free to download from Singer: www.singer.com/sites/default/files/product_manual/9f6eff644490da1893548ddbe0cc151030fb5189%20%281%29_0.pdf I also have a few videos about replacing the belt and timing, etc if you ever need that: kzbin.info/aero/PLsCOZgzzaiKJS_4FKPb4bgAbHtYWnexvy Stop by again someday if you have time.

[@maurycolorado8833]

Thanks for showing me how to thread my 7 I just purchased it with no instructions. No, nothing. Thank you for your patience and showi. Ng the bobbin and thread the machine.

[@andytubesewing1953]

I'm happy you found the video. Thank you so much for the nice comment

[@raccoon_tree3566]

Thank you so much

[@andytubesewing1953]

You're very welcome and happy sewing!

[@SlacksFerret]

I just borrowed this machine, and this video was perfectly helpful.

[@andytubesewing1953]

I'm glad you found the video. If you'd like more info you can download a FREE manual directly from Singer at this link: www.singer.com/search/support?title=347 Everything about the machine and using it. Take care.

[@BliffleSplick]

Thank you so much for this video! I got one of these second (third? fifth?) hand and the difference in controls had me flummoxed until your video. So once again, thank you!

[@andytubesewing1953]

We'll just call it "pre-loved" then. I'm glad you found my video. A very nice model, isn't it? You can download a FREE PDF copy of the Instruction Manual from SInger at this link: www.singer.com/search/support?title=347 52-pages of info about the machine and controls and oiling, etc. Thanks for watching and commenting on my channel. Take Care.

[@BliffleSplick]

@@andytubesewing1953 Oh very handy indeed! Thanks!

[@andytubesewing1953]

@@BliffleSplick No worries. Good Luck.

[@Fattiapples]

thanks for the very informative video andy! do you know whether this model can do a twin needle , and if so which hole at the top would be the correct place to put another spool pin? Also, what do the numbers 3,4,5,6 mean on the metal foot plate? thanks!

[@andytubesewing1953]

Singer Model 347 is a Standard Zigzag machine made to sew with one 15x1 type needle. It has a more advanced sibling, Model 348 which is a Special Zigzag Sewing Machine that can use two 15x1 type needles to sew dual stitching in straight or ZZ patterns. It came with two spool pins. The numbers/lines on the Needle Plate are simply Seam Guides. The line spacing is 1/8 inch. They are there for the sewist to align the fabrics to a line while sewing. The measurement starts at the needle, so number 5 would equal a 5/8 inch wide spacing. You can download a FREE copy of the Instruction Manual from the Singer Support page here: www.singer.com/search/support?title=347 48 pages of great info about using and maintaining the machine. Thanks for watching my channel and good luck.

[@sharonharris225]

Just acquired this model with the sewing table through a resale site. Mainly needed the table but thought I would see if the machine works. Your video was very very helpful on how to use. Realized though after dropping the bobbin in, the bobbin plate isn’t working/turning like it should. Anything I can look at to figure out why it’s not turning? Any advice would greatly be appreciated. Thank you!

[@andytubesewing1953]

Bobbin Plate = Rotating Hook, which is powered by a Timing Belt on the bottom of the machine, which is powered by a Vertical Shaft & Pulley that is powered by gears on the top of the vertical shaft. Some models have plastic gears that get old and break, but I don't remember ever having a broken gear on a 347. You could watch my video for replacing the timing belt to get an idea of how those parts work to turn the rotating hook. kzbin.info/www/bejne/moiZmZR-qplgnrc You could buy a copy of the service manual for $9 to see how to adjust/replace/repair the machine: manualsoncd.com/product/singer-347-348-sewing-machine-service-manual/ You could download a FREE copy of the Instruction Manual which includes how to oil the machine, which is always a great idea to start with on a used, vintage machine: www.singer.com/search/support?title=347 Model 347 is a strong, versatile machine, congratulations.

[@limowhyte4869]

The machine I am using at the moment is a Singer 367 but I find the video both informative and instructive, thanks a lot...

[@andytubesewing1953]

Glad it helped and thanks for letting me know. Nice of you to comment.

[@lauram5383]

Hello great Chanel thank u for posting I have the same machine and as I’m sewing it will slightly pause then keep going. Any ideas as to what that is?

[@andytubesewing1953]

This just started? The machine is new to you? It's hard to diagnose a machine thru the comment section, but I can give some ideas to think about and check. When is the last time the machine was properly oiled? Starting on page 42 of the Instruction Manual it shows where to oil & grease the machine. If you do not have grease, at least put sewing machine oil where they say to. Even Walmart usually sells the oil for < $4.00. If you need the manual you can download a free copy from Singer Support on this page; www.singer.com/search/support?title=347 The motor belt could be slipping as it gets warmed up. It may be old and stiff. You can remove a side cover and look at it and see if it is frayed and stiff. Here is a video about changing a motor belt and setting the tension on it. It shows a different model than yours, but the motor and procedure are the same. kzbin.info/www/bejne/jH-vfZaVbrmjnrc Your motor belt is a common one used on a few models. www.amazon.com/Motor-Belt-196386-14-5-Singer/dp/B07CB8NSHD Your machine came from the factory with a "Button" Style foot controller (foot pedal) that uses stacks of carbon discs inside (carbon resistor) to control motor speed. The controller is, at least 50 years old and may have never been serviced. Lots of "Carbon Black" can build up on those discs and resist the electricity more than they should. That makes them hot (sometimes very hot) and the dirtier the carbons and the more resistance can make the speed of the motor very erratic and even make the electricity hesitate as it goes in and out of the controller on the way to the motor. The motor can strain, groan, slow down and/or stop and hesitate until the electricity builds up enough to sneak thru the carbon stack to the motor. You can buy a new carbon stack foot controller, or better yet an electronic style that never gets hot, but I've had good success cleaning and adjusting the original controllers and getting them almost 100% back to normal. It really depends on the condition of the carbon discs. I made a short series of videos showing how to do that and you can find the Playlist here; kzbin.info/aero/PLsCOZgzzaiKL6ePPxLpmnWSzTyxPKTb71 So, laura, those are just a few things that can cause what you describe is you'd like to check them out you may be able to isolate and correct the problem. Model 347 is a nice household machine and quite capable of sewing clothes, slip coves, curtains, quilts, etc. Good luck and thanks for watching my Andy Tube Channel on KZbin.

[@lauram5383]

@@andytubesewing1953 thank you I will look at all that. I picked this up so it is new to me I did clean and grease everywhere the manual said to before trying to sew with it and the pausing is what I am seeing

[@andytubesewing1953]

@@lauram5383 Thanks for the new info. That leads me to think the foot controller is the thing I would look at. Good luck.

[@lauram5383]

@@andytubesewing1953 thank you so much!

[@andytubesewing1953]

@@lauram5383 No worries, laura, and you know where to find me if needed. Good Luck.

[@juanleyva7411]

Good video Thanks.

[@andytubesewing1953]

Glad you liked it!

[@leiya14]

Just bought one and you helped me so much to make her work again ! I was wondering what kind of needles should I buy for it ? It came with one but I dont know the reference of those needles or the bobin.. thank you anyway for all the great tips ! :)

[@andytubesewing1953]

Congratulations, Lea, and thanks for watching my videos. The bobbin for your machine is Singer Class 66, in metal or plastic. Your model 347 uses what Singer calls the Catagory 2020 needle. Today it is commonly known as a 15X1 Needle. It uses needle sizes 9, 11, 14, 16 & 18. The different styles are "sharp" for woven fabrics, "ballpoint" for knit fabrics, "jeans" for denim and heavier fabrics and "leather" for leather and faux leather. The 15x1 needle is available almost anywhere at local stores like Walmart, JoAnn's, etc. here in the US. Fabric stores, craft stores, and online at Amazon, eBay, etc. Same for the Class 66 bobbins; readily available. Since the machine is new to you, may I please suggest you follow this link to download a FREE copy of the original 52-page Singer Instruction Manual for your machine? It is full of instructions with pictures of all the controls and features of your machine, a great needle/thread/fabric chart, and instructions on maintenance and lubrication. A treasure trove of info from the people who made your wonderful machine. Here is the link >>> www.singer.com/sites/default/files/product_manual/9f6eff644490da1893548ddbe0cc151030fb5189.pdf Again Lea, thanks for watching my channel and I hope you'll have the time to stop by again. Good Luck.

[@leiya14]

@@andytubesewing1953 Waw, I couldn't ask for a better answer !! I was actually looking online for an instruction manual but couldn't find any good one. Thank you so much ! There is a Singer shop in my town I will go check for the needles and bobin. Keep doing your videos they are great 😊😊 thanks again !

[@andytubesewing1953]

you are very welcome and lucky you to have a nearby shop they will fix you up come back and watch Andy tube when you can take care

[@matojo2008]

Andy.thank you in advance.I just got one.It was stuck.cant move the wheel.So I took out the big belt at the bottom and realized the problem was located in the bobbin area.I cleaned.oiled tried to adjust the timing according your video.the hook behind the needle.and it worked...but only when I sew straight.I CANT DO ZiZ ZAG.the needle make the holes but the hook.i guess can not take the upper threath.

[@andytubesewing1953]

Thanks for watching Javier. The height of the needle and it's positioning to the hook affects the ability of the hook grabbing the thread also. Here are some video links that may help. The pendulum movement of the needle during zigzag could also be off, with the needle moving a little sideways on the way up. If you'd like to email this channel at [e-mail] I'd be happy to send you the entire Service Manual (pdf) that goes into details of all this with directions and pictures. Good Luck. kzbin.info/www/bejne/qJqYpK1vq611bKs kzbin.info/www/bejne/jGHPhHeenbFgjK8 kzbin.info/www/bejne/rWquhIWba9-Wr9E

[@matojo2008]

thanks Andy.I will check.

[@reinavilaro1643]

I need help how to change the rubber feet. All my machines needs new ones.

[@andytubesewing1953]

kzbin.info/www/bejne/rImuqISCatV4r8U

[@LuciaFranco-e1m]

Hi Andy, I know someone who has this machine (Singer 347) and her bobbin case is not turning to pick up the top thread. Any suggestions?

[@andytubesewing1953]

So the bobbin case never turns, just the hook the case sits in is what is supposed to turn. If the hook does not turn be sure the machine is not in bobbin winding mode and the center clamping screw (chrome knob center of handwheel) is tight to the right. If a friend loosened it to wind the bobbin they may have forgotten to tighten it back up. BTW, free instruction manual from Singer is here: www.singer.com/search/support?title=347 The hook is rotated by a timing belt on the underside of the bed. The belt goes around two pulleys and the pulley on the right is the "drive" pulley. If the belt is extremely loose or broken then the hook pulley on the left will not turn the hook to catch the thread but the right pulley would still be turning with the motor. You can tighten or replace the belt. kzbin.info/www/bejne/moiZmZR-qplgnrdm. If the belt is OK then see if the right pulley really does turn when the motor runs. If it does not then that may mean the gear on the top of the vertical shaft that turns the drive pulley is broken. That is rare for model 347. Some models have the gear used made of plastic and are now old & brittle enough to lose their teeth or even break apart. You can take the top arm cover off and peek down to the right of the camshaft and the left side below the gear on the horizontal shaft. You need a flashlight but should be able to see a gear. If there is no gear left or no teeth on the gear, then you know. I've never had to change a 347 top gear, but who knows? On many of the 4xx models, the plastic gear is long gone and I have replaced many of them. I even made a video about how to do it that has been watched 100,000+ times. (shows how common the problem is. At about 16:00 in that video I show the location of the gear to give you an idea of where to look on the 347. The gear video is here: kzbin.info/www/bejne/g2TFd6eii5aMbNU Lastly, if the hook turns but the machine won't stitch it may have lost timing and you can use the belt change video to see how to reset the timing. This assumes you thread up everything properly. 😃 That should keep you guys busy for a while, maybe? If more help is needed let me know and good luck.

[@Rae_Reflector]

Helpful thanks. I didn't set up the bobbin thread - can you see without the second thread. I was. Little confused what the bobbin case thread was for? (I'm new at this!)

[@Rae_Reflector]

*sew not see

[@andytubesewing1953]

Welcome, Rae. Glad you found the video.One of my early efforts on KZbin, but still OK. If you want you can download a free copy of the original instruction manual here: www.singerco.com/uploads/download/9f6eff644490da1893548ddbe0cc151030fb5189.pdf Hope you stop by again

[@Rae_Reflector]

Andy Tube . Hello, thank you, Andy. I'm trying to determine if I can just do my quilt without using the second bobbin thread? I wasn't expecting to have to manage a second thread and just want to keep my first attempt simple. I just read somewhere that the bobbin thread finishes the top stitch with a knot. That's sounding like I need both afterall...

[@andytubesewing1953]

Yes, when using the bobbin thread it makes a "lock stitch" to keep the needle thread from pulling back out. If you sew with only the top (needle) thread it will unravel very fast and what you sewed will just come apart. Here are a couple of animated exampples of lockstitching. They show it beter than I can explain. Hope they help. Thanks for asking, kzbin.info/www/bejne/jnLGiIWhf5aeq7c kzbin.info/www/bejne/aGebYqybiNemg5I

[@Rae_Reflector]

Andy Tube many thanks. Very helpful. Yes! That's exactly what happened, in fact. Thank you for your time and helpfulness .

[@ldydeb3]

Thank you for these videos 😊

[@andytubesewing1953]

you are welcome of course and I'm glad that you found them and hope you can stop by my channel in the future when you have time take care

[@raccoon_tree3566]

17:19 could someone help? I’m super confused here?

[@andytubesewing1953]

There's really not much going on at 1719 of the video. Can you give a little more info?

[@lindagieseler9566]

Andy, my 347 has 2 spool pins. Do you know why?

[@andytubesewing1953]

I think you have a model 348, not 347. Model 347 has a one-piece arm cover and a built-in 2-pattern cam. Model 348 has a 2-piece arm cover that has a flip-up center part and a larger chrome knob you can remove to change to any of the 20+ pattern cams Singer made for it. The reason model 348 has 2 spool pins is that it can sew with 2 needles (so 2 needle threads) Model 347 can only use one needle with one thread. You can download a FREE copy of the Instruction Manual for model 348 from the Singer Support page here: www.singer.com/search/support?title=348

[@lindagieseler9566]

I have both machines.@@andytubesewing1953

[@ladyzhana]

I have the same machine. Do you happen to know where I can buy parts and pieces. Mine's working fine but there are some acrylic pieces broken and glued that I'd like to replace.

[@andytubesewing1953]

These models are 50+ years old now and most of us have to buy used vintage parts from sellers on eBay (maybe Amazon has some too) There are a couple of sellers who have their own websites too, like Connie at thriftyfarmgirl.com/sewing-machine-parts.htm

[@ladyzhana]

@@andytubesewing1953Thanks for answering. I'll give it a try

[@andytubesewing1953]

@@ladyzhana No worries, and good luck. 👍

[@ThePeterEffect]

GREAT VIDEO!

[@andytubesewing1953]

Very kind of you to say so. One of my earliest videos and I'm embarrassed with the lighting and so forth, but somehow managed to get the point across and share the info I wanted. 26K views show people need the info. Thanks for taking the time to comment. Take Care.

[@hilarysutherland682]

I just picked up a model 348 I know it's similar to this one but can you tell me if the gears are plastic or metal on mine? Thank you

[@andytubesewing1953]

The 348Model is the top-of-the-line in the series and it does have metal gears on the horizontal & vertical shafts. You can download a free copy of the original 68-page Instruction Manual at this link: www.singer.com/sites/default/files/outdated_product/1317_348.pdf The difference is this Model has a flap opening on the arm cover that allows you to change the pattern discs, also called cams or pattern cams, to sew about 20+ different stitch patterns. It is a very nice, strong and capable machine for advanced domestic (home) sewing and crafting. Thanks for watching my channel.

[@michellem.7805]

Please make a video for replacing the needle on model 457, I think my bobbin thread isnt coming up from my needle being placed in wrong ):

[@andytubesewing1953]

I gave this link on your other comment: www.singer.com/search/support?title=457 The manual shows everything like that. I don't have that machine any longer to make a video. Basically, the needle is installed with the flat side of the top part facing to the back of the machine. (away from you) kzbin.info/www/bejne/mZKXZIeQoJ2neNk

[@michellem.7805]

Okay thanks I was doing it backwards haha

[@andytubesewing1953]

@@michellem.7805 We've all done that in the beginning. No worries and happy sewing.

[@candice_ecidnac]

I'm having serious issues getting my bobbin thread to catch and come up, and the video goes blurry right at the part I need. I've watched your video and someone else's, but my machine just isn't catching on the notch that spins around underneath the bobbin and I don't know why. I'm trying everything here, and even asked someone I know who runs a sewing workshop, but she's across the country. I can't figure this out. And I just snapped a needle because I adjusted the needle arm down thinking that it wasn't low enough to catch, so I guess I'm done for the night. I don't know enough about this to diagnose it. This is my first sewing machine and I can't even get the thing to run.

[@andytubesewing1953]

Oh my, this is serious 👀 Even though you asked someone "across the country" and I'. "across the internet" I'll try to help. Be sure you have threaded the needle and bobbin case properly. You can download a free manual from Singer about it as it won't be "blurry": www.singer.com/search/support?title=347 After that, for the needle thread to "pick up" the bobbin thread the needle bar must be adjusted to the proper height and also the needlepoint must lineup with the point of the hook at a certain time (timing). If you had all the threading/bobbin case done properly then it sounds like the timing was off b/c the needle bar height was wrong or the "point to point" adjustment was off. Here is a video for setting the needle bar at the correct height: kzbin.info/www/bejne/jGHPhHeenbFgjK8 and this video contains timing instructions: kzbin.info/www/bejne/moiZmZR-qplgnrc Moving the needle bar down just made it low enough for the needle to his the hook and break. So, needle height + timing should solve the problem,. Best of luck, and thanks for watching my channel.

[@candice_ecidnac]

@@andytubesewing1953 thanks for replying and trying to help. I forgot that I wrote this comment last night. Turns out it's a timing issue. Once I disassembled parts and watched it, there's no way to get the rotating notch (the bit the bobbin sits in) to catch the thread because they're so off sync. I tried to watch videos on how to fix this but the bottom of the Singer 347 is so different it's just too far out of my wheelhouse to address. The local repair shop said it'll cost "$99 and up" to fix and I'm not sure whether to "invest" in the repair right now for the Singer 347. Learning to use a machine is a lifelong goal so I actually just bought a Kenmore 13660 for $40 this morning and brought it home. Here's hoping it works out better! Thanks again for trying to help. Have a lovely week.

[@andytubesewing1953]

@@candice_ecidnac Oh, too sad 😢 Good luck with the Kenmore.

[@candice_ecidnac]

@@andytubesewing1953 thank you

[@knittygritty1]

When threading the needle, does the thread rest on the spring or should it go inside the spring loop somehow?

[@andytubesewing1953]

It pulls up against the bottom of the spring and then loops over the little metal "finger" towards you. So the spring rest on the thread to give the thread tension ob the upstroke while sewing. It does not go inside the spring loop. Sorry, this video is not that good. One of my early attempts at filming. Here are some newer videos. They are on a different machine but explain better. One is for the needle and one is for the bobbin. Thanks for watching Andy Tube. kzbin.info/www/bejne/d2Gsc52EpbB7pZI kzbin.info/www/bejne/ipOWn36Lp6qnfa8

[@sammis8869]

My singer model 347's hook isn't turning is there any way to fix this and if so how would you fix it?

[@andytubesewing1953]

Here is some info that will help you. If these don't solve your problem you can email my channel email address at [e-mail]. Link to download free copies of the manual and parts list for your machine: kzbin.info?o=U&video_id=NC51ePq0Q7M Link to video showing how to install new belt and set the timing: kzbin.info?o=U&video_id=dW6haHu4-hU Link to a playlist with more info on Model 347: kzbin.info/aero/PLsCOZgzzaiKJS_4FKPb4bgAbHtYWnexvy It could also be a gear at the top of the vertical shaft which would require an email to send you documents about that fix. Good Luck.

[@eldersandim3008]

Singer Model 347 has vertical and horizontal plastic gears?

[@andytubesewing1953]

No. Metal to metal. Top horizontal gear on the vertical shaft and the vertical gear on the horizontal arm shaft are both metal. Take a look here at 1:01 and see a nice close picture of the two gears: kzbin.info/www/bejne/lWbdkoaFZq1lmM0

[@eldersandim3008]

@@andytubesewing1953 Thanks my friend.

[@melanielewis6544]

The thread is getting wrapped around bobbin parts on my machine. Bobbin makes a scraping noise, too.

[@andytubesewing1953]

Although there are many possibilities as to the cause of this, the bobbin scraping is not normal and perhaps you are using the wrong bobbin. If you have a model 347 Singer like in this video, you should be using a Class 66 bobbin, plastic, or metal. (Model 347 came from the factory with plastic class 66 bobbins) That bobbin has slightly curved sides, like a teacup saucer. If you are using any bobbin with flat sides it is the wrong bobbin Type & size. With the wrong bobbin, the thread can hand, snag and break and get very tangled. That's the first thing to verify. You can Google SInger Class 66 bobbins. They are sold all over the world; here in the US, you can find them anywhere sewing machines (Singer) are sold, and at Jo-Ann, fabric stores, eBay, Amazon, etc.

[@melanielewis6544]

@@andytubesewing1953 technichian say it is gears. Do you want a Singer 347 for parts?

[@andytubesewing1953]

@@melanielewis6544 You mean a technician at a sewing machine store? Did he try to sell you a new modern machine? There are two gears on model 347/348. One is on the main horizontal shaft that the handwheel turns. The other gear is directly below that gear on the top of the vertical shaft that goes to the bottom of the machine and turns the pulley that drives the timing belt. In every 347/348 I have worked on those two gears are made of solid steel. I have never seen or heard of those gears going bad or failing. Never. I'm sorry you are having this experience with that nice machine. Thank you for the offer, but I don't need it for parts. Very kind of you though. If you'd like to see what the steel gear looks like, you can pause this video at 00:11 and right of center see the front side of the gear with all the teeth on it. It sits around the horizontal shaft: kzbin.info/www/bejne/m6W4YWV_ic2hbrs In this second video if you pause it at 08:23 you'll see my finger pointing at the backside of that same steel gear and you can see the back of the gear teeth. kzbin.info/www/bejne/rp2knWCMnbuahck The matching gear sits below the gear in the video so the teeth can mesh together.

[@krishnaskasivasi1067]

We have a Singer Rotomatic.We are facing problems in threading the machine.Kindly give some suggestions.

[@andytubesewing1953]

Here is a link to my video about free sewing instruction manuals. It will show how to find the model number on your machine and download free instructions manual and parts list. Thank you for watching. Good Luck! kzbin.info/www/bejne/hHSYYpiGppWEba8

[@rhondamercado7527]

Hey Andy, I just found the same exact machine at a thrift store today for $24. Now I get to go and watch your videos for the 347. It even came with the instruction manual! I’m super excited. I always enjoy hearing your feedback on the machines, what’s your take on this one?

[@andytubesewing1953]

Congratulations. I did not do too many in-depth videos for model 347, but I restored many of them. It's a versatile model that still has a steel gear on the vertical shaft. It has a timing belt, but it is cogged as are the pulleys, so no problem. A favorite portable machine that can hold its own for clothing, crafting, jeans, and light upholstery. My customers loved this for a travel machine, sewing clubs, quilting clubs, vacation trips, summer homes, etc. I perfect model for the young or first-time sewist. Besides all that, it's BLUE! The model 457 videos work for the 347, but you can buy the Service Manual for $9 here: manualsoncd.com/product/singer-347-348-sewing-machine-service-manual/ When Singer went to the 400s, like 413, 416, 418, 457 they started the plastic top gear which eventually wears out, the 513, etc with plastic gears on the bottom too. Dumb. Every home should have a 337, 338, 347, or 348 for handy projects, quick repairs, and general sewing. $24? 👀🏆👍 that rocks, gurl!!

[@reinavilaro1643]

I just got my blu singer model 347.

[@andytubesewing1953]

Congratulations, it's a great machine. You can download a FREE copy of the 52-page INstruction Manual directly from Singer at this safe link: www.singer.com/search/support?title=347 It explains all the controls and settings of that machine, how to sew straight & zigzag with it, make buttonholes, and monogram, free motion sewing, applique and how to clean and oil it. Happy sewing, and thank you for watching my channel. kzbin.info/aero/PLsCOZgzzaiKJS_4FKPb4bgAbHtYWnexvy

[@reinavilaro1643]

Andy Tube it is a faster machine.! it was dirty, without foothpressor,, bobbing . Doing a general cleaning.

[@andytubesewing1953]

@@reinavilaro1643 Some videos for timing and belt changing and cleaning the tension. kzbin.info/aero/PLsCOZgzzaiKKVlkxPT9FMTdvUUGj8Ydf8 Good Luck, Reina; it's is worth your efforts.

[@reinavilaro1643]

Andy Tube I have been watching all your videos. Very specific and instructional. I Olso have 457, 600, 603. I loved singer machines...

[@reinavilaro1643]

I need help with a touch tronic 2000, that the needle bar doesn’t move, I don’t know how to take the top cover...

[@ulicornprocreateartclub2617]

Thanks bud, super helpful

[@andytubesewing1953]

Welcome, and thanks for te kind words.

[@marie789ful]

Subtitles please ! Grace a votre video je reviens a ma Singer et me remets a l anglais🤗

[@andytubesewing1953]

Merci d'avoir regardé ma chaîne. Si vous souhaitez regarder l'une de mes vidéos avec des sous-titres en français, il vous suffit de cliquer sur le menu des sous-titres, puis de changer la langue en français ou dans toute autre langue de votre choix. Voici quelques courtes vidéos expliquant comment procéder si vous ne savez pas comment cela fonctionne. How To Change Subtitle Language On KZbin? kzbin.info/www/bejne/h16ZkGqVmcebiNE Android Phone : How to change subtitle language on KZbin App kzbin.info/www/bejne/gYG2mKibe8R2psk

[@theundergroundcambalache]

Hi Andy! What a great channel filled with useful information, new subscriber here! So I just got this beautiful machine and I'm impressed how good it works. The only issue I found is the stop motion wheel is stuck. I can still wind the bobbin but I'm afraid it will cause stress on the bobbin area. Is it ok to use like this (with the needle moving while winding the bobbin) or is there a way to unstuck the wheel? Thanks in advance, any help is much appreciated!

[@andytubesewing1953]

Thank you very much. It is better if you will fix the stop motion just to save wear and tear on the machine. Here's a couple things to try. Between the handwheel and arm shaft is a clamp washer. When you turn the smaller knob left it releases pressure on the washer so the arm shaft won't move but only the handwheel. If the washer was installed wrong then the little screw of the smaller knob can be jammed against the washer. Remove that little screw and try turning the knob. If it WAS a jam then the knob should turn. If it still won't turn the washer may be stuck to the handwheel from hard dried up oil or grease. Someways to get it loose is to heat it with a hairdryer or heat gun and soften the dried gunk. Put a little WD40 or similar oil into the hole of the little screw and behind the small knob trying to get it on the washer. You do not need a lot of oil, just a few drops. You can heat that oil also. Give it some time to work. If the knob still won't turn I give it a good smack with a rubber or wood mallet direct on the knob towards the machine to try and "jar" it loose. If you use a regular hammer of course you need to protect the knob with a thin magazine or something to prevent scratches. A couple of hits. You are not driving in a nail, just trying to jar it loose. I have also tapped on the edge of the knob on the left side downward with a rubber mallet or plastic screwdriver handle. I think you have the idea. Here is a video about the handwheel on a similar model to your machine: kzbin.info/www/bejne/bHmQhHetjbGEes0 This is a common problem for a machine that's been in storage or has the washer installed wrong. Good Luck, Paula, and thanks for watching my channel.

[@theundergroundcambalache]

@@andytubesewing1953 thank you so much for taking the time to respond and give such a detailed explanation, you're awesome! I will try every suggestion until I get it to work :)

[@andytubesewing1953]

@@theundergroundcambalache You can do it, Paula. It seems stuck forever but will eventually free up. Good Luck.

[@theundergroundcambalache]

Update: the knob came out! I tried first with oil and heat, and finally a bit of tapping with a hammer did the trick. And the washer was on the wrong side. Thank you very much!! Now I'm not sure how far I wanna go with the cleaning. The machine is filthy inside, all covered in black dust, looks like something exploded there. I already removed a few parts following your step by step restoration videos on the 337, but I'm afraid to remove everything and mess up the configuration. So I'm leaning towards doing my best with a toothbrush and cotton swabs. Do you think it's ok to use a degreaser product to clean it if I'm not going to wash it thoroughly off afterwards?

[@andytubesewing1953]

@@theundergroundcambalacheHere are the instructions for the degreaser I use. It says you can wipe it dry. If very dirty and you scrub with a brush it says to wipe it off with a wet rag, but that is probably to get off the gunk you scrubbed. www.rustoleum.com/~/media/DigitalEncyclopedia/Documents/RustoleumUSA/instruction-sheets/krud-kutter/original-krud-kutter-Krud-Kutter-Original-How.ashx A couple times I moved the motor and light fixture to the outside of the machine and wrapped them in baggies then washed the whole machine with the KK and dried it. It got about 90% of the gunk out even though I had left all the other parts on the machine. I left the motor and light fixture hanging by the wire harness while washing and drying and was just careful how I carried and moved the machine. A very small amount of water leaked into the motor baggie, like a teaspoon, and I just wiped off the motor and dried it with the hairdryer. This was an effective method and took much less time than removing so many parts and then putting them back on and adjusting them to specs.

[@fatimarahimi-yf9ow]

Thankssssssss❤

[@andytubesewing1953]

Welcome!

[@ronalddaub9740]

I have a 347 like that the 348 has a silver front . 348 has all metal gear my 347 like that has a plastic gear that has shattered They're both blue but they look similar totally different machines 347 + 348

[@JonShumar]

Needle will not pick up bobbin thread on model 457 singer sewing machine

[@andytubesewing1953]

What to check for: bent needle, wrong type needle (use class 2020 or 15X1), needle not inserted completely, a needle inserted wrong (flat side of the top facing to back), needle bar at wrong height/hook timing off kzbin.info/www/bejne/pnKxqpZ6bpWqh8k. This model is internationally known to have a history of broken plastic gear on the top of the vertical shaft. That means the hook/timing belt will not rotate and no way to pick up the needle thread. It's a $10 gear and here is a video about replacing it kzbin.info/www/bejne/g2TFd6eii5aMbNU It is very easy to test for this by removing the bobbin and looking at the hook holding the bobbin case while you turn the handwheel towards you. If the hook does not turn (rotate counterclockwise) then you probably have a broken gear.

[@thepassionpray]

What are tension settings, bobbin thread not sewing.

[@andytubesewing1953]

Linda, more detailed question and maybe I can help. If you feel it is only a tension problem then: The tension system on most singer machines is very similar. Here are some videos I made about tension. On the 404 series, I did videos 14a thru 14f all about tension. kzbin.info/www/bejne/gKLEpnyFjNhseas kzbin.info/www/bejne/bmTSZ4aehqiEfsk kzbin.info/aero/PLsCOZgzzaiKIB4kvIHCfHYuyLMUp5A4UI