How to Woodturn a Scoop on a Wood Lathe.

[@davidharwood9552]

Great project 👍

[@DeansWoodworking]

Thanks David!!

[@garyjohnson9297]

When I bore with a speed bote or forstner bit I like to give the cutting edges a touch up with a diamond hone , or needle files so they cut , not scrape I attended a demo at my club , presented by Rudy Lopez , making his tiny stemmed goblets , he bored the cup with an 1 3/8" twist drill , it gives the bottom a rounded bottom , without , hollowing . I am sure you have been turning for years, , but blowing shavings out of hollowed ware is quick , but it aerosolizies the dust , and can be inhaled deeply, without realizing it. I love your presentations

[@DeansWoodworking]

Always wear a respirator, Thanks for Watching!!

[@wkddrummer]

Great video. The wooden clamp you used on the bandsaw, so useful, what would you call that? I'm looking for something similar.

[@JB-iu6dj]

Great Video Dean. 100% adding this to my ‘to make’ list.

[@DeansWoodworking]

Glad you like it, Thanks for Watching!!!

[@jontoolman]

Nice project yo try. Thanks for all your tips and sharing.

[@DeansWoodworking]

Thanks for watching!

[@jimbrock8928]

I’m gonna try that thanks for sharing it looks great ❤️

[@DeansWoodworking]

You’re welcome 😊

[@lanbrady2310]

Nicely done

[@DeansWoodworking]

Thanks Lan, and Thanks for Watching!!

[@denisvienat849]

Super vidéo Dean’s 👍

[@DeansWoodworking]

Thanks Denis!!!

[@robertcornelius3514]

Nice work. Before you cut the end of the handle off, I would have remounted it and worked on getting the wall thickness down a bit more. Just me

[@DeansWoodworking]

Thanks for Watching!!

[@JiggsysShed]

Will definitely have to try and make one myself somepoint. Thanks for sharing

[@DeansWoodworking]

Go for it! Thanks for Watching!!!

[@garyjohnson9297]

Now that I have a disk/ belt sander , I can make these

[@DeansWoodworking]

Awesome

[@elizabethwright1964]

I love this! I will have to try to make one of these. What size diameter did you start with?

[@DeansWoodworking]

I make them in all sizes Thanks for Watching!!!

[@josephwise485]

Nice video Dean. I have the same belt sander, but I have it in the upright position. I have to adjust my belt every time I turn it on, do you? If you don't, do you have any tips on it? Thanks.

[@DeansWoodworking]

Joseph first Thank you for watching!!! I don't have any problems with the belt. however I do have some tips. Make small adjustments let it run for several minutes make another small adjustment. the key word is small, it is easy to adjust too much and it will go too far and then the other way and some times it takes a few minutes for it to start its sideways run. I hope this helps. patience is the key.

[@jackwebb8749]

Another really nice project. I have ordered an ice scoop kit to make for someone but now I want to make one on the lathe. Nice project. Well done. About how big was the blank you started with?

[@DeansWoodworking]

I make them from about 1 1/4" up to 4" Have fun.

[@sufinawaz]

Seems like you changed hands while using skew chisel. Why is that?

[@DeansWoodworking]

I turn both left and right handed It makes so many cuts much easier. Thanks for Watching!!!