How to zero gap Kemei & Wahl hair clippers

[@mslnt1]

Thank you. I've had my clippers for 2 years and put them away because the blades weren't sharp. Following your tutorial gave me the sharpness I needed.

[@masaomimusic995]

gotta be embarrassing for a woman to comment here

[@mslnt1]

@masaomimusic995 there's no embarrassment on my end. Have a good day!

[@flakoflores1971]

I tried to zero gap and one side always gets higher than another when I tight the screws

[@DuckBarberMHK]

What I do is I tighten up both screws enough that the blade is fixed but also adjustable when you put force. I align the blade straight and hold it as tight as possible with my hand and then screw the bolts in completely.

[@beebbeec280]

Yooo you’re a lifesaver….thank you brother

[@jjoo3399]

my bottom blade seem to be uneven and i cant fix it, any tip?

[@camxdidxthat]

Do your clippers get loud when the guard is on and the lever is closed?

[@DuckBarberMHK]

Yes. I think it's because the bottom blade is hitting the side of guard. I usually open up the lever little bit if it's too loud

[@justadudewithsunglasses6798]

Thank God someone pointed this out. Cause my clipper gets loud when I put on the guards with the lever fully closed

[@bagginn]

@@justadudewithsunglasses6798 just open it up a little

[@SpongeLizard]

Hey bro! I tried zero gapping my clippers but now whenever i open my lever, it cuts at like a 3-4mm length. Do you experience this as well? And is there anything i can do to fix this?

[@DuckBarberMHK]

Hi zero gapping does not neccessarly mean the blades are completely closed off together. It should give off some spacing between the top and bottom blade.

[@GrantMasterpeace]

That's my dream clipper.🥰 I hope someday i have too🙏🙏☝️ God bless sir..

[@DuckBarberMHK]

Yess it's worth it!

[@tiffsand9]

My brother got these and was cleaning them but the black thing that holds the smaller blade popped out from the spring and i cant get it to go back on and stay. Any help is appreciated

[@Yaniv_Mamo]

Yo man I tried to do that on my 1986 and when I'm screwing it back I have a gap between the blade and the actual clipper can you help?..

[@manlikemomo7431]

yo did u figure out how to fix this?

[@ethang7242]

My blade has even spacing when I screw it in but with use, becomes diagonal. Any idea what the problem might be?

[@GEYE1072]

Clipper oil

[@POMPOMCHECK234]

Thoughts on KEMEI KM-809A? The White colour clippers

[@0h0fcourse]

Link for replacement blades?

[@Uzzaif007]

Is bade size same in both clipper

[@victorvictorfitness7537]

When you know how to work with corners you never have to zero gap ever again

[@DuckBarberMHK]

facts. Corner work is important

[@tmoney5976]

Then how do u take out the skin line ?

[@lancer717]

Damn. Do a tutorial video on how to work with corners. Please!! Probably the only time in life you can “cut corners “ ;)

[@fattyfades]

Yo so the little black pics came out and I don’t know how to put it back in help

[@dinky19810]

For some reason mines won't zerp gap.

[@BagoozBandOFFICIAL]

How about VGR V-032? Is it the same way to Zero Gap?

[@giannimatee4877]

Does the ceramic blade cuts sharper on this clipper? Or is it better to keep it stock?

[@DuckBarberMHK]

Hey I actually ordered ceramic blade. Im gonna make a video on comparison so ill find out soon!

[@bennymorales5311]

@@DuckBarberMHK did u ever put out the video ? I couldn’t find it

[@aliyanhassan3617]

Thank you Brother

[@pauldvora]

Bro, what's the difference between 1986 and 1986z?

[@DuckBarberMHK]

I have never heard of 1986z. I might check it out

[@pazz2518]

I have the same question, couldn't find any answers..

[@nadnad0133]

0.5-1.0mm in manual

[@chihai_tran]

Does it produce a loud noise when closing with a 1 or half guard?

[@DuckBarberMHK]

Not woth #1 but with #2 yes

[@chuy2914]

I accidentally took off the black part and I can’t put it back on can you help ?

[@arziemanzainorin1774]

i can help

[@anastasiosaslanidis5265]

I’m between a 87 and a 84. Which would you recommend??

[@DuckBarberMHK]

84 has a battery indicator but I have never tried them yet. 1987 one is great tho!

[@florentin4061]

Bro I think this will be 0,2 mm

[@BongoisaPyro]

Are these clippers actually good? I feel like all of the negative reviews on Amazon tell a different story. Some said it only lasts 2 months and others said it stopped charging..

[@DuckBarberMHK]

I;ve been using this trimmer for almost a year now, but it's going strong and cuts still sharp fam

[@BongoisaPyro]

@@DuckBarberMHK hmm probably fake reviews huh?

[@florentin4061]

Will it cut 0,0 mm ? :D

[@ssbmgosu4990]

Jo wassup I have the same trimmer. One question tho is 0 gap supposed to remove/cut all beard hair ? I saw an crazy add on Instagram with the babyliss where they cut beards and shit directly to 0 and bring it into perfect shade. Sadly after I 0 Gapped my trimmer it doesn’t really cut all hair to 0 could Someone with experience explain that to me ?

[@DuckBarberMHK]

Zero gapped is meant to take off as close to bald, but not quite. If you want to bald it out, I recommend using a foil shaver

[@ssbmgosu4990]

@@DuckBarberMHK thanks my dude

[@Yoni-kc6mw]

Do you recommend doing this? What is the benefits of this? Isnt it make the gurad become shorter? Like after doing this the 2 gurad will become like the 1 guard?

[@DuckBarberMHK]

Yes I recommend zero gapping because when you create an initial guideline whether with a trimmer or no guard lever closed, zero gapped clippers can take out the line much more easily and clean.

[@nicholasgbenebitse]

@@DuckBarberMHK People say that zero gapping is dangerous because it cuts into the skin though, what do you think about that?

[@mzulashraf.h]

Who is good kemei 1986 or 1987?

[@DuckBarberMHK]

86 has the display panel while this one doesn't I guess thats the only difference

[@denisbasshead7787]

@@DuckBarberMHK the cutting blade start with 1mm and goes at 3mm or 0,8 and 2,5 and the wlrk time with full battery is 90 min or 300

[@Kaiser187]

Why the 87 over 86? 86 is the best clipper Kemei makes.

[@DuckBarberMHK]

I think the only difference is the display panel no?

[@Kaiser187]

@@DuckBarberMHK I think the motor and blades are different on them. Could be wrong... who really knows.

[@DuckBarberMHK]

@@Kaiser187 Interesting. Maybe I can buy the other one so that I can compare both.

[@Kaiser187]

@@DuckBarberMHKThat would be good. Just gotta make sure its the original model and not the pro.

[@danielbermudez3089]

how about you go to the lowest rated barber from your city and do a little review of the cut? (maybe as an idea). You said that no other barber has touched your hair in years.

[@DuckBarberMHK]

That's actually a lit idea. Imma go to barber and see how they can fuuuuk it up

[@rondelarosa9089]

its jz d same gap befor and after screwing..

[@DuckBarberMHK]

This was the demonstration purposes

[@McdonTVofficial]

👍👍👍

[@IzyDigi]

Ia this working? Can destroy the machine?

[@DuckBarberMHK]

No it won't destroy machine!!

[@adolfomedina9603]

Where did you buy your blades??

[@DuckBarberMHK]

I bought it off of wish.com

[@DuckBarberMHK]

You can also find it on Amazon I believe

[@BK_-uc7op]

First😂