How we Rebuild Super Giant Industrial Gearbox for another 10 years life ✦ Machining & Assembly

[@justjoe942]

I love a shop that has more knowledge than technology. Technology is fleeting, knowledge is generational.

[@umariqb5249]

MashaAllah zabardast worker hain talent sy bahray hain mager pakistan taraqi kion nhi karta

[@modern9228]

I think this is a historic film nostalgie. Accuracy no need 😄😄

[@arthuroduor7253]

This men love there job and hard worker to ready to learn you must start from something for me salute the Pakistan

[@stevecowdell6622]

They did the best they could with those machines.

[@bambuli1907]

i love their safty-shoes!🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@reedspangler5208]

At least this place looks like a machine shop. 😀

[@raufjaleel8317]

A large machine shop.

[@davem453]

It looks like a museum for 40's and 50's machine tools

[@ronwade6252]

Perhaps, but the result using the tools they have is pretty impressive.

[@alizareebrahimi2993]

بسیار کار سخت و سنگین که فقط کسانی میتوانند انجام بدهند که از تجربه کاری بسیار بالا بر خوردار باشند کار دقیق و با ارزش.

[@alanwann9318]

Lets go work in heavy machine shop wearing pyjamas and open toed sandals

[@saw1898]

To be fair, those are “safety” sandals 😂😂

[@meddylad]

Sound like a normal weekly dream for me

[@jakesmith6337]

Just goes to show how safety crazy we are here in the USA

[@raufjaleel8317]

​@@saw1898courtesy of the Timberlands.

[@youngki187]

In many cases, damage of gear such as fracture; corrsive pitting is due to bearing. Just make sure bearing has fully oiled , outer and inner ring of bearing is fully positioned and fixed and bearing box is at upper tolerance with good roughness of surface, then gearbox could use many years, even over 15 years if gear has carburized.

[@bombidaebombidae5560]

трудолюбивый народ! низкий поклон !! Станки СССР походу !

[@MrGeorgin007]

Не фантазируй, СССР сам копировал западные образцы, а в Пакистане всё английское, столетнее.

[@bombidaebombidae5560]

@@MrGeorgin007 ...как говорил куравлев - ой дурааак!🤦

[@MrGeorgin007]

@@bombidaebombidae5560 вот я и говорю - не фантазируй дуpak .

[@CaptainJasta]

Buy these men some dam safety glasses and safety shoes!

[@MarkSmith-nw4os]

Teamwork.

[@viyugunmj359]

Good

[@gwharton68]

I bet the guy standing around, in clean clothes, is the boss.

[@hydraulichands]

😆 😅 😂 You have Eagle eyes

[@bexler53]

@@hydraulichands Is this in Pakistan or India if you need used HBM or VTL let me know OM Kuraki etc

[@Hizone1]

Yes, that was the boss. Typically called "Haji sab" in Pakistan. During the video, he was supervising and using abusive language with his labour.

[@antongyrt4814]

А выставить перпендикулярность, межцентровое?

[@pusho_k]

Вы о чем сударь)))) крутится и хрен с ним

[@antongyrt4814]

@@pusho_k Они пользуются высокоточным инструментром под названием Глазометр😂

[@alanjohnstone2539]

Health and safety! Wish they would stop using crappie adjustable spanner’s. Amazing what they can do out there.

[@jeffrawe6486]

How can these guys work in that environment with no more than house slippers on their feet. ?

[@hydraulichands]

How they did, You just watched it, & you can watch in other videos on channel that its very normal for them to work in slippers, just like brushing teeth in the morning 😉🦾

[@Mariuz-ru9iw]

It goes to show ,,,, safety means ,,,, having comment sense... respect to this man

[@stuarth43]

we gave en, machine tools, cricket and gin n tonic and robbed em blind of precious stuff I do not like those huge piles of swarf kicking around on the shop floor, it reminds me of my joint

[@Randy-io8pl]

You can tell which one is the supervisor.

[@Machete90210]

OMG! where is a WHS rep when you need one.

[@bilalazam564]

This is pakistan

[@horstmuller7512]

You might think this is Pakistan, but it's actually Bradford, UK. Some are filmed in Luton as well.

[@andreasmucke4158]

What kind of working conditions are they ? Safety at work they don't know

[@wongwong95]

這間工廠的地面是泥地,工人不穿着整齐划一工作服。 所穿衣服油漬斑斑,寬袍大袖,維修質素成疑。

[@denisfedotov3013]

У них даже обычной рулетки нету,меряют линейкой)

[@sumanhati6825]

Vai safety shoes & helmet to pahen lete

[@robmcd436]

Loves these vids but please repair your broom and sweep up. The men are wearing sandals for goodness sake.

[@raufjaleel8317]

Will Timberlands protect?

[@ptv1250]

They pick the housing up from the dirt floor and place it right on the machine table with dirt and chips stuck all over the bottom of it. The over hang on the one side can’t be good! Half the housing is hanging off the table unsupported. Picked up the gear shaft with a chain that was wrapped around the bearing surfaces…. These guys should all be wearing a red nose and floppy shoes so they look the part of the circus and clown show!! Here’s an idea!! Make a bench!! Get off the floor!! It’s the 21st century!!

[@fordguy8792]

Are you BLIND? At 0:33 there is a man CLEARLY cleaning the bottom of the housing! He then comes back with a sharp edged scraper and finishes the cleaning! So petty and quick to demean that you're deliberately overlooking steps? Grow up, seriously, and get over the first world ego.

[@ptv1250]

@@fordguy8792 You’re the one that’s blind…you dolt! He used a piece of wood to knock off a few hanging chips, then used a piece of sheet metal to barely scrape the bottom. That’s a machined surface that should be stoned before it’s used to locate from. Educate yourself before you speak clown boy! You have zero knowledge of machining or setting up a job to be machined.

[@horstmuller7512]

You'r right, but in this century they have to invent toilet bowles.

[@backho12]

Bench? We don't need no shinkin' bench!

[@HIDETOSHI1024]

そこまでやっといて、かけた蓋の部分は直さないんかい。

[@ChefKevinRiese]

If it doesnt work then hit it with a hammer!

[@ValentinN-nz4xj]

Ладно оборудование не новое, но в таком сральнике работать

[@robertodebeers2551]

You guys need mesh baseball caps that say: EAT AT JOE'S. Then everything will work out just fine.

[@eduardohenriquedovigo6912]

LUGAR SUJO .TUDO JOGA NO CHAO .

[@DSAK55]

how the fuck did they center the line bore

[@stevenhorne5089]

That's the worst milling I've ever seen, but they're proud of it. WTF

[@sheikhkhalid5969]

You Mill?

[@stevenhorne5089]

@@sheikhkhalid5969 I've been milling since my sophomore year in high school. I also grew up in an industrial, blue collar area. Almost every family had at least 1 machinist in the trade. It is an awesome profession.

[@sheikhkhalid5969]

Cool, but what was wrong with milling a rewelded cracked gearbox shaft housing? Those little pits don't matter, not if the repair lasts 10 years. That's how subsistence economies work. Repeated reuse. Part of my life was spent in the Alleghenies. I can turn stuff in a small lathe. But I make my living as a wood cutter, Miller, bowl maker.

[@maximilianburchert4037]

Da wird noch REPARIERT !!!! Nicht wie hier Deutschland....

[@greghardy7239]

No steel toed shoes, no gloves, no hard hat, loose fitting clothing. It's all sketchy.

[@horstmuller7512]

Wow! I bet this shop depopulates every year a small town and also creates every year a new army of handless and footless beggars.

[@hydraulichands]

You lost the bet, nobody gets injured ever, but that's history and you won't believe me, but as a proof i invite you to watch future videos, these guys will be here, working just like that, with full body parts, having smile on their faces, only time can prove me right.

[@sheikhkhalid5969]

What needs to be depopulated is this repeat copy paste clean nails city slicker attempt at hating with English. It's myopically ethnocentric. It requires a lot of skill to work this factory for one hour. You depopulate once and there won't be a working shop for three months. Take that to McDonald's pantry. And also ask OSHA for the number of people who died work related in USA last year.

[@delboytrotter7902]

Are you trying to say you're not impressed by their 'DeWalt skin toe capped safety flip flops' ! lol

[@timl8258]

OSHA would have a stroke if they visited.

[@matthewjoyal4088]

Welcome to 1940

[@AlvesMartins-d7p]

Very disorganized workshop, working in a place like this is asking for accidents at work.

[@joshuabanwaree2640]

Terrible

[@allbatros1277]

👎🙈 ölçüm aletleri yok, kumpasla o iş olmaz