How to wire a thermostat of underfloor heating mat diagram UK

[@asks101]

Very clear explanation - thanks

[@bogdantutoveanu4887]

Excellent video! thanks for taking the time to do it.

[@Cyclerepairz]

Looking to get one of these . The seller has said that it can run from a 13 amp fused spur for 3m squared. Is this correct?

[@ericthekingthekingtheking4842]

Hi what make is the thermostat and mat youv used can you post the link please for the price etc thanks

[@nw5835]

Why don't you check out his other videos or investigate for yourself.

[@gurjsagoo4380]

Great video, explained the theory and demonstrated it. Thank you

[@drumsonly44]

How do you wire 2 or 3 mats to the thermostat?

[@Shootingintheshires91]

Did you work this out. That's what I'm currently wondering?

[@drumsonly44]

I got an electrician to do it, he used a contactor, in the video he mentions it at 3:15

[@dennisfowler7873]

would love to see how u wire the contactor from the thermostat

[@waynebanthorpe]

When using 2 Matt's and a fused spur is needed do I connect underfloor floor heating cables to the fused spur and then the 2.5 to the thermostat?

[@bharatmorarji8979]

Hi Great Video and detailed explanation , I have one question, if you or anyone expert can answer. I think my Thermostat is blown, I am going to replace the thermostat. This was installed by builders and is powered from RCD to a 45A double pole switch then on to Thermostat. I think not right.??. Can you suggest the safe approach for the spur. Do I use 13A fused double pole switch or 20A double pole switch. UFH for 12.3 sqm and reading resistance 29ohms & 1722W . Just need clarification please. Many thanks. BM

[@stevegauldphotography]

Great Video - I need to move the Thermostat to another cupboard outwith the bathroom - Can I use normal (2.5) twin & earth to extend the matting cable?

[@golzarali]

Great video.what is wiring diagram for 2 or 3 mats exceeding the 16Amp please?

[@abdulrahiman812]

We loved your video so much we bought the whole kit. Well done for a great video 👍🏽

[@harpalbansal2457]

Thanks for this video. It was really helpful 👍

[@stalker1567]

What happens with the earth's? Are the mains earth and floor earth just screwed to the back box now?

[@dubsteptt]

I have spur socketed which was used for old storage rads, can I use these to power the UFH, making sure it doesn't go over 13A

[@richardatkinson7819]

Great video. Very clear and comprehensive explanation with all feasible planning scenarios covered.

[@lorraine9442]

Wow this was the simplest, clearest video I've come across. Thanks so much! Now I just need to know how to wire it into the main power supply 😂

[@ROKO779]

Can I use 13A FCU for 8m2 160W underfloor heating ?

[@boxinggloves1699]

Can I wire a twin impeller water pump and underfloor heating thermostat to one spur?

[@grayhalf1854]

Does it really matter which way round the mat is connected? Isn't it just a resistive cable?

[@myasaee]

Such a great video, simple and clear explanation. Helps to plan ahead on everything I need.

[@hamoodakram8107]

Hi my underfloor heating is not working. Thermostat working light shows but no heat

[@kimbo1966]

stop touching the bare wires , im worried for you 😛

[@halalgriddlefoodwithtee4280]

Thanks pal, very informative 👍

[@passionate3249]

Very explanatory video Thank you

[@alpachino468]

I only want a single thermostat, so if I have two separate underfloor heating mats, can I combine the live and earths of both mats into a single terminal of the thermostat?

[@Eidoo66]

hi thanks for the valuable videos and clear information , do have any video shows the repairing of electrical UFH (under floor heating) as i have same company you installing ProWarm i check with them it & my thermostats is working (according to prowarm) & i checked all cables as you video it all right But still no heating at all!! can you show how to run resistant test & insulation resistance test if possible on the same UFH .

[@gordoncruickshank1732]

completely idiot proof.thanks

[@Madman-ge2eb]

Please show video showing how to wire using 3 core cable for underfloor heating and normal air heating

[@gayatrisunkersett2101]

This video is helpful, we are trying to connect the contactor but dont know how it should be wired.

[@murskaz5475]

Can you install for me? Based in london

[@microsecure2612]

Hi How do i wire 2 matt to one thermostat pls ?

[@comeflywithme8234]

Soo easy to follow. Thank you.

[@irfanulhaquesports2398]

Excellent video God bless you sir

[@andrewalb3056]

Great video keep it up good work mate

[@andydawson2070]

Brilliant guide, thanks for posting it.

[@EstNineteen90]

Brilliant video, but where are the sensor wires coming from ??

[@sheezemirza3410]

Two wires (Live and Neutral) should come directly from the mat. The sensor should have its separate wires. You should have got a sensor with a wire in the box

[@VortexMotiveVision]

Helpful thanks.

[@mks4682]

well explained

[@danielsingh7211]

Great video

[@a5amr2]

You legend.

[@ireshadilshani1188]

Respect 📢

[@carligneiting]

Great vid. Well explained

[@AK-Classic1]

Lovely, fantastic

[@MujibRahman53]

Can I use a plug using a 3amp fuse (I'm using 3m²)? Why the need for 16amp mcb?

[@RajINDER121]

Thank you for this demonstration. I had a question. The output of my heating mat is 200w/sqm, the matting is 18m^2., Total output=3600watts, which requires 3600/230=15.7amps. I have wired this as the 1st example using a 13a fuse spur from an RCD protected socket to the thermostat - Can I still wire this to a 13amp FCU, will it just limit the power to 13 amps => 2990watts max, Or would this just overload the circuit?

[@mharsha3516]

16A on a 13A FCU will overload your circuit at max usage and trip your RCD. Not recommended to use 13A FCD for 16A output

[@maiapatryktictocks6529]

What about sensor cable, is it matter which way you connect it?

[@muta70]

pawel porebski he did mention doesn’t matter what colour went where.

[@CMDRSloma]

What about regular thermostat for combi (water / heating) boiler?

[@nw5835]

What about it?

[@mango3586]

thank you for this good information

[@Mad4plumbing-ltd]

Great explanation 👍

[@Ronaldo882.]

I appreciate your work and explanation - you helped me a lot thank you! top man 🧍‍♂️