Dell Latitude E4310 Disassembly, Fan Cleaning, and Thermal Paste Replacement Guide

[@howfixit]

***ENG: Links to screwdrivers and parts in the description under the video* ***RUS: Ссылки на отвертки и заменяемые детали в описании под видео*

[@loganparker4184]

A word of advice to anyone doing this, get a good labelling system for your screws. And also with the keyboard you should hear a click on the left of the keyboard but not on the right, it should just slide upwards. And remember to just stay calm and work slowly. Good luck! (:

[@frankagnes6860]

Many thanks mate, helped me a lot to replace motherboard!

[@babis600]

great work,just did it to my 4310 to replace thermal paste. Thank you

[@jakeneale9966]

What an absolute dick of a laptop to open. It's one of the hardest I have come across

[@Dekkia_]

Thank you for this Video!

[@edwinchw]

remind me why i hate older laptop super hard to disassemble

[@edneynascimento8415]

Muito obrigado pelo vídeo, gostaria de saber se esse notebook tem entrada M.2? Desde já agradeço.

[@Attari_Tiger]

Thanks A Lot Bro

[@AndBenC]

hi. which part is the hard drive here I'm trying to see if I have a loose connection as my e4310 is telling me that it can't find the hard drive.

[@cooltube2457]

cool tut keep up the good work

[@ZTF-PSN]

What is the glue or whatever that you squeeze out of the tube before you replace the fan?

[@howfixit]

this is thermal paste, you can use for example zm-stg2

[@ZTF-PSN]

Thanks

[@muhammedcamlioglu]

Hocam bunlarda m.2 girişi var mı ? Birde kaç gb ram desteği var ?

[@moviechannelallmovie4931]

Dear bro in this laptop processor is not removal or upgradeable?

[@howfixit]

No, in this laptop you can't upgrade CPU

[@akoskristof2479]

Can i change video card in this machine?

[@howfixit]

Ákos Kristóf you can't do this, there is no slot for videocard on MB

[@oyer3030]

super tuto thank you

[@tayyabakram2797]

Bro I need to repair the Bluetooth in this laptop...where is Bluetooth located on motherboard

[@caidenharrington5643]

In the wifi card itself. I believe

[@tayyabakram2797]

@@caidenharrington5643 its located under volume adjustment buttons..I found out....thnx for replying

[@imadzed1833]

DUDE MY VIDEO CARD BURNED TH GUY SAID IT IS ATTACHED TO TH PROCESSOR SO IT COST TOO MUCH TO CHANGE THEM ? and thnx for the vid :),

[@VivyX2]

There is no "card" there is only a chip

[@damianmadero8152]

POR QUE NO SACAR LA GRASAS VIEJA DE LOS PROCESADORES

[@ezekill98lml54]

mal yo la limpie toda y la desarme toda con un destornillador fillyp y uno chiquito plano

[@damianmadero8152]

@@ezekill98lml54 q procesador se puede poner yo tenga la q tiene 540 pero no se si puedo poner otro

[@ezekill98lml54]

@@damianmadero8152 la notboock q es el mismo modelo q la del video tenia un procesador core i5

[@ezekill98lml54]

@@damianmadero8152 pero no se puede cambiar el procesador a la notboock d este modelo

[@chong1.089]

aaaahhggg ASMR

[@andrewcodrea8708]

hi. which part is the hard drive here I'm trying to see if I have a loose connection as my e4310 is telling me that it can't find the hard drive.

[@anky_but_on_steroids3750]

Andrew Codrea see to that side where there is an e-sata port ant there will be a slot which is cutted and is removable there are two screws to hold it which you have to remove inorder to take the hdd out and boom there is your hard disk..

[@AndBenC]

hi. which part is the hard drive here I'm trying to see if I have a loose connection as my e4310 is telling me that it can't find the hard drive.

[@frankagnes6860]

+AndBenC Harddrive is already out. At 2.38 he shows the two screws to be removed. Then slide out the HD to the left, from outside.

[@AndBenC]

hi. which part is the hard drive here I'm trying to see if I have a loose connection as my e4310 is telling me that it can't find the hard drive.

[@VivyX2]

i dont think he showed where the hardrive is and also hardrive is held down by one screw if u remove that then u can get the hard drive out *says some random 3 years after video upload*

[@cwmbc]

Thats a glitch in the startup program..either that or hard drive motor has packed in. Try another hard drive in it. It slots in on right side. Has a couple of ribs on the underside to help slide it out. Just 2 screws hold in place....diagonally.