I usually don't comment on much but I gotta for this. (DJI Mini 4k) Crashed into a tree and luckily it tumbled to the ground for me to collect. Tore the ribbon cable. Followed this vid step by step and my drones up and running again!!! 10/10 video
@samkirwan3902 Жыл бұрын
You saved my drone! And saved me from either buying another one, or spending who knows how much getting it repaired - thank you!!
@richardwharton8235 Жыл бұрын
Thanks for the tutorial!! You helped me bring my mini 2 back to life after crashing it. After I replaced the ribbon cable I started the drone up, it had multiple error codes, I restarted the remote and drone, when switched both back on it worked exactly how it should. Thanks for the help again!!!
@stevemazza8 ай бұрын
Thanks for helping me save my drone!!! A crash into some trees resulted in a partially ripped ribbon cable and your video helps greatly in getting back up in the air.
@lefordz80755 ай бұрын
Got it done but had a heck of a time plugging the tiny ribbon cables back in, thought for sure I was going to mess one up. Happy to report it worked out great and the mini 2 lives to fly another day.
@sergeynovikov915 ай бұрын
Brawo! Best Video Repair Gimbal DJI Mini 2. No empty talk, no water. You excellent technician. Thank You.
@ricardasulozas Жыл бұрын
Great, it worked as charm. Thanks to you I overcame disassembling anxiety!
@iRepairAutos5 ай бұрын
Thanks for posting this video. Because of you I was able to repair my drone!
@andmotion5399 Жыл бұрын
Well, hallalo ja :) - after about 3hrs (ribbon connection wires slightly bent on arrival!!!, tried and tried, ended bending them badly trying to get to locate, then pulled them all back again comparing with the original cable- it worked -50mins!!!) - My drone works, no errors IMU/GPS... - It works - Thank you for such a clear video, likewise saved my a good bit of money.
@palolargo87312 ай бұрын
excellent ill be able to fix my drone, you are the best
@idegas3913 күн бұрын
New cable from Aliexpress for 5 euro and some time and effort. Works great!
@S.Overkamp Жыл бұрын
My cable was broken after a crash. Watched this video and bought me a new cable on aliexpress. 2 weeks later it arrived and installed the cable with this video on the pc. Took some time, but the drone works again! I installed it on a mini 1.
@tracyj318 Жыл бұрын
Im in the middle of doing this step by step as you are in the video. So far so good .will update u on my end result. Waitin for ribbon now.
@orezculapte72077 ай бұрын
How it went?
@rihardsbimanis83906 ай бұрын
Did you do it? Does you drone work now?
@YoMichaelRay Жыл бұрын
This video saved me big time! Definitely earned a new subscriber out of me.
@stevrgrs3 ай бұрын
Bro you put back in a pre bent cable. Show people the CORRECT way to bend their newly FLAT cable. That’s the only real difficult part of this repair :P
@devander6347 Жыл бұрын
Thank you for this video without you i would have spend so much more time and money, i purchased the cable and followed you step by step and now the drone is 100s again!! thanks
@henrydavis2660 Жыл бұрын
Thank you so much! This video was simple and concise, yet detailed enough to get the job done. Saved my drone!
@leonardopereira_945 ай бұрын
Congratulations , you help me Very much 🤝🤝🤝🤝🤝👍
@FrancescoCominetti Жыл бұрын
I would like to add 2 info, connectors glue could be very hard, I used a soldering iron at 210° C Mini 1, SE and 2 ribbon cables are the same
@whatspopping79922 ай бұрын
Thanks alot you save me hundreds of dollars
@Ismacuch6 ай бұрын
Thanks my friend, you saved me!
@mecdepaname7575 Жыл бұрын
thanks a lot guy, i fixed it with your video ! After a big crash at Zakynthos Navagio beach, it fly again ! Thanks from Paris !
@Wcclark75 Жыл бұрын
just a thank you for the algorythm.. A huge help thanks for the guide
@BlazingGex5 ай бұрын
oh yes, big success! thanks!
@71k313 ай бұрын
Hat geholfen. Vielen Dank!
@gortech3898 Жыл бұрын
What a fantastic instructional video without speaking. You have talent, many I bet. Thx for sharing!
@5Mhz11 ай бұрын
Thanks Bro your a Legend!! My done now works perfectly
@lleonardow_ Жыл бұрын
Thank you so much, bro! Saved my drone! ♥
@stevecorrao71706 ай бұрын
Thank you!
@tornagawn3 ай бұрын
No biggie but 2 gimbal mounts and the front left sensor, ?compass….were dislodged in a crash. Perfect vid to show fixing it.
@HidalgoTigrao6 ай бұрын
Thank you so much!!!
@manuelrodriguez1338 Жыл бұрын
Increíble, funcionó a la perfección.
@bangaji77118 ай бұрын
Thx you so much 🙏
@JCAquino2012 Жыл бұрын
Amazing, tanks a lot for this vídeo from Brazil.
@ArgonautasDrone Жыл бұрын
Ótimo drone, sofreu quedas, consertei e continua voando perfeitamente. Meus vídeos continuam muito bom.
@robyhandoyo338410 ай бұрын
thank you
@antoniomarquez664 Жыл бұрын
Foi o melhor video de como trocar o flat ou desmontar o DJI mini 2 agradeço de coração esta de parabens 👍👍👍👋👋👋
@Andrius-Lithuania Жыл бұрын
My recommendation: gimbal assembly do AFTER every cable is attached to motherboard and MB in place. Cause I had difficulty to attach cable after I glued it before MB installation as on this video instruction.
@new.videos Жыл бұрын
Fantastic video.. one question, what kind of glue are you using for the connectors. Can the glue used to glue the display on the mobile phone?
@DennisMoreira Жыл бұрын
Muito bem explicado. show!!
@Felipesilva-eu4rk Жыл бұрын
ótimo tutorial
@MrLemurman Жыл бұрын
As per instructions here, I ordered the #1 Phillips screwdriver. Once I got the screwdriver I tried it in the screws and it does not fit. Won't even go into some of the holes in the body. Will not fit in the prop screws.
@arunp14498 ай бұрын
Thanks for the video, In my case after replacing the ribbon cable the Mavic mini is not powering on. Only the 4 leds shows up and turn off :(
@jeangomes8161 Жыл бұрын
Parabéns gostei muito tirou minha duvidas
@jaybhandari1310 күн бұрын
Navigation system error what is solution
@GunOfYear Жыл бұрын
can you upload a video on how to replace the front led of mini 2
@thecan80an33 Жыл бұрын
Slight crash and it ripped this cable. Before I replaced it (thanks for the instructions) it would work but gave me the "Incompatible Gimbal Data" error and I couldn't fly. After repairing it just as you show here, I still have the same problem. Replacing that cable didn't help. Any idea on how to repair Incompatible Gimbal Data?
@Yehoshua.Matityahu8 ай бұрын
came to see what i can’t see & found out… my bottom mount tore out so essentially i need a new chassis 😀
@joller79 Жыл бұрын
Does the ribbon cable also suply power to the camera feed? My mini 2 has no videofeed and no gimbal function, after crash
@Randalgoncalves Жыл бұрын
It will works as the same for Dji mavic mini first edition?
@businessmotivation4542 Жыл бұрын
How will flex cable attached into drone. How it will be connected to a drone
@DrMarvinLara Жыл бұрын
Is this Professor Frink from the Simpsons?
@TrippyGang20004 ай бұрын
Is it the same for mini 2 SE??
@Rocnfire Жыл бұрын
I did this repair and it fixed the original problem but now it says navigation system isn’t working error code 30105 anyone know how to fix it?
@MehdiOthman10 ай бұрын
can it be replaced by the ribbon cable of mavic mini 1 ?
@kirstybailey3977 Жыл бұрын
Hey, please help. I've followed this tutorial. When I turned back on a solid red light now the drone won't attempt to turn on? I've checked all points are correctly pushed in and are in the correct positions. 🤷
@KusagiTsuki8 ай бұрын
look at error codes in app not at "red light"
@miguelmitre6207 Жыл бұрын
Does this tutorial apply to Mavic mini as well?
@eddiedevine834 Жыл бұрын
Hi is there any chance you would replace the ribbon in my mini 2 drone the drone works the camera just doesn’t go up and down and I can see the ribbon is broke and the places I can find to do the work want what I paid for the drone is this something I could get you to do please
@WaltusAurelius11 ай бұрын
My drone will not turn on now that I have it all back together. Any ideas where I went wrong?
@andrewswimingpool5 ай бұрын
Same
@ThiagoSilva-ie4gs Жыл бұрын
Awesome. My cable just arrived and I'll try to change it as soon as I get a glue gun
@sousarogers Жыл бұрын
Hello do you need to connect to the PC
@sousarogers Жыл бұрын
After installing the new Flex cable,
@ThiagoSilva-ie4gs Жыл бұрын
@@sousarogers no
@thatswhatsup5456 Жыл бұрын
How’d it go for you
@ThiagoSilva-ie4gs Жыл бұрын
@@thatswhatsup5456 I took like one week to do this because it was more complicated than I thought but it's working like a charm so far.
@JOSHUA-xg7cs Жыл бұрын
pls do tutorial video of gimbal calibration using python apps
@Jared-jv8fy Жыл бұрын
What made you replace this cable
@greattouchrepairs2574 Жыл бұрын
Pls Gimbal flex of min1 and min2 are they desam
@john4491 Жыл бұрын
My mini pro 3 wing broke can you plzzzz do a video on that
@fireball2275 Жыл бұрын
I think you have more issues than it being Broken if it has wings
@christopherderksen5524Ай бұрын
I changed the ribbon and now have 1000 different error messages 😂 must’ve done something wrong
@angelmanuelcamacho8690 Жыл бұрын
But, yes yes yes, there's a big But, if you buy a new cable or gimbal, motor ect, then you need to calibrate the gimbal through your computer, an app that's called Python and it's a hassle to do it.
@FlightPattern177 Жыл бұрын
Just did this and there was no calibration required. Was basically plug and play.
@ScottMitchellMedia Жыл бұрын
9:4o - I see what you did there ;p
@Jared-jv8fy Жыл бұрын
I’m having a problem where it says gimbal stuck. I tried about everything, it worked for a minute and then it jammed again recently. My only & last idea is to fix the issue with replacing this cable. If anyone else has this issue and has solved it let me know
@AFishInC4603 Жыл бұрын
just to make sure, you aren't flying with the cover on are you?
@drinrem Жыл бұрын
What if the camera said it need to be calibrated my drone fell. The camera is not working. I already replace the broken cable.
@ilhamsalam5517 Жыл бұрын
Hey did you solve the problem.. I’m having the same issue please share if there is any info thank you
@drinrem Жыл бұрын
no. It needs to be calibrated by technician. i cant find any software to calibrate it. i buy a new drone. hahaha. 😭😭😭