If ur lights, the keyless entry lights,come on and stay on. Change the battery in ur key fob. It's the alert to tell u ur battery in ur fob is low. Its in the manual as well. Hope this helps someone. Ive had 2 fords. 2002 Explorer and 2013 Escape
@SNBias20102 жыл бұрын
This is what I came here for!
@Freeholdman3 жыл бұрын
Thank you. It worked on my 2017 escape SE. Followed your link to get the Factory Code. It was quite easy to take read the factory code using a cell phone, without removing the glove box.
@Simohamed84104 жыл бұрын
Thank you for your help Life savers Thanks for all good people in this Earth
@JDTeufelHunden2 жыл бұрын
Thanks for these Escape posts! The key one worked for me. Note: on my 2013 Escape, there was a wire bundle that made it pretty much impossible to get the code without pulling the glovebox. And the glovebox method worked perfectly. Thx!!
@codenamefabio9662 Жыл бұрын
A simple, yet concise video 👏 Thank you my friend
@davidmacleod5274 жыл бұрын
very good job on telling us how to do this ' I did this and it works ;thanks
@victorashort1552 Жыл бұрын
I didn’t know what those numbers were thanks to your video I know I do have a ford and I found your video I will try you made it easy thank you
@jaguiar453 жыл бұрын
Here in 2021 for my "new"2015 Escape. Thanks
@HowToEscapeDIYTipsandReviews3 жыл бұрын
Wow so you are saying that this same procedure works on a 2021 Escape?
@jaguiar453 жыл бұрын
@@HowToEscapeDIYTipsandReviews No I have 2015. I just meant I am here in 2021.
@HowToEscapeDIYTipsandReviews3 жыл бұрын
@@jaguiar45 Hah ok that makes more sense :) I was like- WOAH i didn't think there was a 2021 Escape out on the market yet! Thanks for confirming it's still legit at this time - appreciate it!
@EstoYOtro3 жыл бұрын
All very nice, and clearly described in the owners manual. BUT: Is it possible to enter a new code with even numbers?
@quamereross4376 Жыл бұрын
I think that people need to be aware that you must slide your finger down the keypad before entering the code. I was trying to put in the code just off too but it’s wasn’t working until I saw this video saw you slide your finger down the numbers.
@zefdin101 Жыл бұрын
Awesome man, thanks! Clear, concise, no bs … appreciate it!
@benjaminsmith28862 жыл бұрын
You're a life saver sir
@rwilinn6 жыл бұрын
It worked for me. 2017 Ford Fusion Hybrid. Thanks
@jimmiemires26444 жыл бұрын
Thanks for the video! Now I have a number I can remember. 😎
@HowToEscapeDIYTipsandReviews4 жыл бұрын
Awesome! glad to hear it worked for you- thanks for the feedback !
@Esha9182 жыл бұрын
Worked for my 2019 Ford fusion hybrid se. Thank you.
@mowingman8164 жыл бұрын
Worked really good on my 2018 escape! Thanks!
@HowToEscapeDIYTipsandReviews4 жыл бұрын
Great to know- thanks so much for the feedback!
@alfonsogriffin4093 Жыл бұрын
How do you find the factory code if you bought the car used and were never given any codes?
@HowToEscapeDIYTipsandReviews Жыл бұрын
We have a video on our channel for how to find it- its located on a sticker behind the glove box!
@HossamElramy36 жыл бұрын
I did it for my 2013 Fusion And it did work!! Thanks bud
@HowToEscapeDIYTipsandReviews6 жыл бұрын
Awesome! Thanks for checking out the video and glad it worked!
@morrisondiver5 жыл бұрын
Very helpful with used Explorer, many thanks.
@HowToEscapeDIYTipsandReviews4 жыл бұрын
Great to know that it works on there- thank you for the feedback!
@livingstone19745 жыл бұрын
Programming works great. Havent tried erase yet
@OneManTheBand6 жыл бұрын
Worked like a charm on my 2014 Escape
@willedee34874 жыл бұрын
Saved me $65. What the dealership quoted me to "look up the code"!!! Lol
@HowToEscapeDIYTipsandReviews4 жыл бұрын
Awesome! Glad it helped!!!
@RabidWolf19662 жыл бұрын
How? If you don't know the factory code, you can't do this
@willedee34872 жыл бұрын
@Shane Cheatham I don't know the factory code on my vehicle. I just programmed a new code and it worked.
@tomasxfranco10 ай бұрын
You need the factory code to program a code though...
@ammaralshareef88 Жыл бұрын
Highly appreciate it it is really helpful and it worked with me 👍🏼👍🏼
@moemoe-yd9yh2 жыл бұрын
Thanks for the help
@HowToEscapeDIYTipsandReviews2 жыл бұрын
Glad it worked for you! Thanks for the comment!
@songbird372p74 жыл бұрын
Oh thats great bought a used mkx and any six digit code works
@bobbac4 ай бұрын
Very helpful. Thanks
@ronaldhaugen59676 ай бұрын
I have a 2015 taurus Interceptor ,does this car have that feature?
@HowToEscapeDIYTipsandReviews6 ай бұрын
Hi Ronald- nice! I've always wanted to drive one of those! If it's an interceptor, my GUESS would be no, because it is a bit more of a "bell and whistle" feature that the police fleet vehicles probably wouldn't care for as they're pretty utilitarian, BUT I do know that my keypad lights up when I press my fob to unlock or lock the vehicle remotely. So, if you haven't seen it at this point when using your key fob to lock/unlock, I'm thinking it isn't equipped with this. BUT YOU DO HAVE A BADASS ENGINE IN THAT PUPPY! Enjoy it :)
@nav74214 жыл бұрын
Great video man
@HowToEscapeDIYTipsandReviews4 жыл бұрын
Thanks for the encouragement! Please let us know if there's something you want to see on the channel!
@AMDRyzenEnthusiastGroup3 жыл бұрын
thx worked perfectly
@HowToEscapeDIYTipsandReviews3 жыл бұрын
Awesome! So glad it was helpful- thanks for checking out the channel!
@AMDRyzenEnthusiastGroup3 жыл бұрын
@@HowToEscapeDIYTipsandReviews i'm gonna' toss you a sub, just for taking the time time to reply. ;)
@HowToEscapeDIYTipsandReviews3 жыл бұрын
Hah! Thanks a lot!
@ryanmoreno30873 жыл бұрын
My factory code was under the steering column, just behind the plastic. 2014 SE
@HowToEscapeDIYTipsandReviews3 жыл бұрын
Really?! That's unusual- what trim and engine size if you don't mind me asking?
@ryanmoreno30873 жыл бұрын
How To Escape: DIY, Tips, and Reviews So I have the 2014 SE 2.0. I actually have a tag on both sides, passenger and driver the the driver side number is the correct one for me.
@basementmidi7 жыл бұрын
Did the trick on mine. Thanks for uploading! Very helpful. Thank you so much!
@HowToEscapeDIYTipsandReviews7 жыл бұрын
Excellent- Glad that you were able to get the job done! Thanks for watching!
@alleymoe Жыл бұрын
I THINK FORD MADE THE FORD ESCAPE BETTER IT DEPEND OF WHAT YEAR YOU HAVE ?
@doriesse8243 жыл бұрын
What if the factory code does not unlock it? Also, it then doesn't work if I enter my own personal code.
@applausebutton97233 жыл бұрын
I’m having the same thing happen to me
@randycollens2681 Жыл бұрын
I had similar issue. Just narrowed it down to an issue with the 1-2 button not working correctly. Tested a few things, then tried pressing against the panel on the right side of the numbers to help see if it would make better contact internally, and yup. After 2 years, I press with one hand and can enter my code without fail. Maybe this will help someone else
@w.c.orielly90594 жыл бұрын
What if you want to program in 34343? Not 33333... How does the keypad know if your pushing the 4 or the 3? or are you not able to use both numbers of the same pad unless you've hit a different pad between like 35463.. I'm confused???
@RickDaGoat892 жыл бұрын
Why would you set it to 34343 instead of 3333? I mean 33333 is more easy to remember
@tomasxfranco10 ай бұрын
It's the same, you only have 5 buttons
@alleymoe Жыл бұрын
FOR THE ONE WITH THE 2013 ESCAPE I GOT A 2018 I LOOKED UP THERE MOVE ONE WIRE THERE IS THE CODE . I THINK ONE LATER YEARS IT WILL BE NO WIRES IN THE WAY ?
@kyleandersen68793 ай бұрын
So how do you click a 2 or a 9? If every button has 2 numbers, and i want to be the number 2 as the code, do i press that button twice? But if thats the case how did you press 3 so many times in a row without it becoming a 4
@414juggaloKO2 ай бұрын
What if you don't have the factory code? I just got one used and it's not in the manual. And I only got 1key. So I can't do that trick to find your code
@HowToEscapeDIYTipsandReviews2 ай бұрын
Hey there- if you don't have the factory code and you have a '13-'19 Escape, you can find the code located on a sticker on the BCM, which is a fuse/connector/computer box located in the passenger front footwell behind the glovebox. We did a video on finding the code and it doesn't have anything to do with only having one key so you should be good to go there - hope this helps! Video tutorial link is here: kzbin.info/www/bejne/nJC2pHydiLagj6ssi=lVloNEGNn7dLlvSX
@markandrene37607 жыл бұрын
worked great!
@HowToEscapeDIYTipsandReviews7 жыл бұрын
Great! Thank you very much for the feedback and for stopping by the channel!
@jamesdaul8540 Жыл бұрын
So I bought the car with only 1 key and there is no card to find the code on. Now what do I do?
@HowToEscapeDIYTipsandReviews Жыл бұрын
We have a video on the channel to find the number located on a sticker behind your glove box on the front passenger side- you can reach up with your phone to take a picture of it or take the glove box off which isn't too bad- about 20 min of your time
@trockwell30245 жыл бұрын
On my 13 Fusion the key code has to be entered backwards. (Example: 12345 has to be entered 54321)
@grantkortokrax10403 жыл бұрын
Thank you, came here to watch the video and saw your comment. Tried it right away and it worked!
@robertogomez81003 жыл бұрын
Great video, one of my keypad set of numbers doesn't light up anymore does anyone knows how to solve this?
@HowToEscapeDIYTipsandReviews3 жыл бұрын
Thanks for the feedback, Roberto! If just one light/ number set does not work, it's likely the module that will need replacing if that's possible. I don't think that the individual LED can be serviced, but I could be wrong. Let me do some digging for you and see what I can find.
@robertogomez81003 жыл бұрын
Thanks a lot for your reply I hope I can find a solution.
@dadmarbony44563 жыл бұрын
What if you don't have the factory code?
@charmyers54613 жыл бұрын
Good question!!! I am looking for the same thing
@t.lee.p91823 жыл бұрын
Same here
@dadmarbony44563 жыл бұрын
@@t.lee.p9182 you can find it under the hood, by the fuse box, that’s what someone told me, but I ve never checked it
@t.lee.p91823 жыл бұрын
@Tim Shell... This looks very promising! Thank you 😉
@TimeDavid-qd8hc Жыл бұрын
@@t.lee.p91821:59
@tdeweesebeats3 жыл бұрын
What if i dont have factory card. Bought used and no card. I do have all manuals though
@LordBubbly Жыл бұрын
I have a Ford Fusion 2020 hybrid and My factory code has the same two repeating number 09 in the 5 digit code. It work when trying to reset it, any function that’s needs the factory code, it won’t accept the factory code on the my sync3 touch screen under key code. I also never got a second key fob when I bought it, they just gave me one key fob. How do I fix this?
@Chefpetrillo4 жыл бұрын
What if I don’t have my factory code and no one could tell me what it was when I bought it from a used dealership. Not anywhere written in the manual and I’d rather not get charger 100 bucks by Ford to just plug it in and tell me any suggestions?
@HowToEscapeDIYTipsandReviews4 жыл бұрын
Good question- try this video- the code from the factory is on a sticker behind your glove box! kzbin.info/www/bejne/nJC2pHydiLagj6s
@TqAntiqueno Жыл бұрын
This worked!
@fredrickolowojesiku64192 жыл бұрын
How do I enter even number on ford explorer door keys. Please assist
@user-te8uo1hk2o3 жыл бұрын
Thanks alot It really work But, can erase original code? Both of them are working now
@user-te8uo1hk2o3 жыл бұрын
Fusion 2017
@HowToEscapeDIYTipsandReviews3 жыл бұрын
Hi and thanks for the feedback! Unfortunately you can not erase the original code as it is the factory reset/default in case the vehicle has a new owner or in case you may accidentally forget your new code
@johnnybass59643 жыл бұрын
I have a 2013 Ford Explorer my whole key pad is blinking and want stop I noticed this morning after I had to jump start my SUV
@davidbanman52725 ай бұрын
Can you reset the factory code
@markcocio75012 жыл бұрын
When I connect my phone to SYNC on my 2014 Ford Escape I can't hear my incoming or outgoing calls, radio and I can't input my navigation directions. Don't know what I need to do to correct the issue?? I get no sound from anything
@double_aa02gaming35 Жыл бұрын
What if you got a used car and don’t have the owners manual
@Rainsnow052 жыл бұрын
I'm struggling with resetting my keyless entry pad. I can't find the factory code in the car or online. I am the 4th owner of the escape.
@HowToEscapeDIYTipsandReviews2 жыл бұрын
Hi Carole- understood. The factory reset code is printed on a sticker on a module behind the glove box. It is not hard to remove the box or you can see if you can sneak your phone up and snap a pic of the sticker with your camera phone
@HowToEscapeDIYTipsandReviews2 жыл бұрын
Here is the sticker location: kzbin.info/www/bejne/nJC2pHydiLagj6s
@shylablack81993 жыл бұрын
Does this work if I want to erase the factory code as well. I’m trying to disable the feature all together
@HowToEscapeDIYTipsandReviews3 жыл бұрын
As far as I know you can not disable the factory code :/ it only erases the personal code. The factory code is the "key" for a reseller or yourself to allow a new personal code but its permanent unfortunately
@eagerlawncare3700 Жыл бұрын
Is the factory code listed in the owners manual
@HowToEscapeDIYTipsandReviews Жыл бұрын
Unfortunately no- but it is listed on a label stuck on the fuse box in the passenger footwell. We have a video on finding it if you want to see it- its a reach upwards but you can do it with your phone or take out the glove box which is a bit easier.
@Krobiiiiiii3 Жыл бұрын
How do you remove the factory code though??
@serna00323 жыл бұрын
Hello my ac and keyless entry code is out what could be the cause of it
@HowToEscapeDIYTipsandReviews3 жыл бұрын
Hi David- sorry for the delay- are you still having this issue? Is it completely out, as in it won't light up at all? Or does it light up and then remain unresponsive? I know our '13 SE tends to light up and be unresponsive when it's sitting in direct summer sun for a while. Please let me know when convenient. Thanks!
@bigfish17992 жыл бұрын
The erase function on mines isn’t working I put in the factory code and pressed 1-2 then held it for two seconds still no reset
@msware01046 жыл бұрын
Thank you!
@HowToEscapeDIYTipsandReviews6 жыл бұрын
Absolutely! Glad you found it helpful!
@backwardskatersonly2 жыл бұрын
THANK YOU!!!!!! A+
@ziajared5570 Жыл бұрын
How do I locate my factory code for 2015 ford escape?
@randycollens2681 Жыл бұрын
Under glove box, by fuse panel, there’s a white sticker with 5 number on it.
@patrickguffey19676 жыл бұрын
hey man I have a question can that be done on my 2018 Ford 450 Platinum edition Super duty? great job on the video my first time watching your channel keep them coming thank you Patrick.👍👍
@duanal5 жыл бұрын
Any code input in the pad will unlock the door... literally any combination of numbers. Over tried erasing the codes but nothing works. Any ideas?
@dilpreetdosanjh3494Ай бұрын
But why can’t I remove the factory code I wanna remove that one
@HowToEscapeDIYTipsandReviewsАй бұрын
unfortunately that's permanent as an ultimate fallback for the next person that wants to set a new personalized key code :/
@dilpreetdosanjh3494Ай бұрын
@@HowToEscapeDIYTipsandReviews yeah that’s the problem I wanna change the factory one since I’m having problem with my family so I think they might try to do something to car
@HowToEscapeDIYTipsandReviewsАй бұрын
@@dilpreetdosanjh3494 man that sounds tough- it could be a bit dramatic, but you could pull the panels off the door and disconnect the wiring connector to the keypad? That way you just have the physical key?
@dilpreetdosanjh3494Ай бұрын
@@HowToEscapeDIYTipsandReviews I will do that then
@4gresurfacingfinishing2263 жыл бұрын
What if you don't have the factory code
@HowToEscapeDIYTipsandReviews3 жыл бұрын
Not a huge issue- check out this video on finding the location of the factory code behind the glove box :) kzbin.info/www/bejne/nJC2pHydiLagj6s And if you're not much of a contortionist, here's a video on removing the glove box to get to it :) kzbin.info/www/bejne/mXLPgJJtqL-HasU Hope this helps- thanks for checking out the channel!
@Dylanset154 жыл бұрын
This works for the Ford Fusion 2012 hybrid??
@victorashort1552 Жыл бұрын
Thank you I didn’t even knee what it was you video was great and helpful I give you 5 stars ⭐️ thank you 😊
@davidoffei67276 ай бұрын
I just locked the keys in the car. I don't know the code too, how do I erase the existing code for to create mine
@HowToEscapeDIYTipsandReviews6 ай бұрын
Hey there David- sorry you're in that pickle. There is a small credit card sized card with the factory reset number on it that should come with the car (or it did when it was new at least) and then the code is also located on the BCM in the passenger footwell...I recognize thats not helpful since you're locked out. I feel like there is one more place I've heard it being shown but I'm not sure its accessible from the outside. I'll do some digging and get back to you.
@fabivargas32017 жыл бұрын
I have a 2005 ford five hundred and this worked, but it still unlocks my car with the factory code too, I thought once I reset it to my own personal code It would no longer work with the one it originally came with, I unfortunately shared my code with someone I no longer trust and trying to just set it to my new code and delete the old one, is that possible? Thank you!!
@HowToEscapeDIYTipsandReviews7 жыл бұрын
Hi Fabi, I'm not sure that the car ever forgets the factory code as it's the base / default code to reprogram the car to your personal use. I hear you on wanting it to be more secure, but I don't think the car can ever have something to go back to if it were to be sold/passed on to somebody else other than yourself- Sorry- I know it's not really the answer you were looking for, but it's intended as a failsafe in case you forget your personal code or need to set a new one. Thanks for checking out the channel and best of luck with your 500! Glad you were at least able to add another code with this vid!
@fabivargas32017 жыл бұрын
How To Escape: DIY, Tips, and Reviews Bummer, thank you for replying👍🏼
@HowToEscapeDIYTipsandReviews7 жыл бұрын
Absolutely
@yairalizacevedo19907 жыл бұрын
I bought a ford fusion 2015 but I do not know if it has the kay code recorded, how can I verify or delete it?
@HowToEscapeDIYTipsandReviews7 жыл бұрын
Yairaliz Acevedo hi Yairaliz, thanks for watching and for the question- I cannot vouch for fusions directly, but with the escape, it the factory code is displayed on a sticker way up underneath the dash on the front passenger side. With the escape, you go into the foot well and look up- maybe look for something similar for your fusion?
@pearlinedubreuil77163 жыл бұрын
Will it work with ford mondeo 2011 2.2 200ps
@HowToEscapeDIYTipsandReviews3 жыл бұрын
It should be the same protocol across all Ford vehicles with this illuminated touch number pad :) Don't see a reason why it would be any different. It may be different if you have the physical rubber buttons
@hollyalcantar30023 жыл бұрын
What is you don't have the Factory code
@HowToEscapeDIYTipsandReviews3 жыл бұрын
If you don't have the factory code, you can locate it behind the glove box in the front passenger footwell. We have a video on it here: kzbin.info/www/bejne/nJC2pHydiLagj6s
@cowboysfan80884 жыл бұрын
Can you completely clear the factory code and just use my own code?
@HowToEscapeDIYTipsandReviews4 жыл бұрын
Unfortunately no, not that I know of- it seems the factory code always exists as a fallback. So you'll always have 2 codes- your own, and the factory code. Just keep the factory code secret if you can :)
@derickwrede1743 Жыл бұрын
Yeah that sucks. I want to erase the factory code and put in my own code. So now I have 2 codes that unlock my door 🤦♂️🤦♂️
@JRJUNIOR2154 жыл бұрын
thanx
@HowToEscapeDIYTipsandReviews4 жыл бұрын
You're welcome! Glad it was helpful!
@stevel3o76 жыл бұрын
I have a 2016 escape. I found the factory code, and used your procedure for erasing personal codes, but the prior owners personal code is not erasing. I wonder if it is because the personal code is not code #1; i.e. another code number? If that is the case how do I erase?
@BarbD557 жыл бұрын
I try and try, but it won't do my new #'s. Are the doors to be locked or unlocked to start this process? PS, the manufacturer code works fine. and cars in cool garage. It seems to work IF I have my keyfob in my pocket.
@HowToEscapeDIYTipsandReviews7 жыл бұрын
Hi Barb, thanks for asking- I'm not sure if the fob in close proximity is a factor or not- my Escape requires the normal key. I also don't think that the doors need to be locked or unlocked- check this out: owner.ford.com/how-tos/vehicle-features/locks-and-security/how-to-program-your-keyless-entry-keypad.html It's the Ford recommended procedure and specifically calls out the time sensitivity when entering your numbers. Please let me know if you still have difficulty after this :) Thanks for watching the channel!
@RobertoPerez-ln8bd6 жыл бұрын
I bought mine used and i think the last owner put a code in it i can still reset the code if i dont know the last owner code?
@HowToEscapeDIYTipsandReviews6 жыл бұрын
Hi Roberto- yes! The factory sends a master override code which will allow you to overrite an old code. This can be found either in a card that should be in your manual. If the card is not there, you can locate your factory key code by going under the glove box. Check out these two videos on just that: Finding the code: kzbin.info/www/bejne/nJC2pHydiLagj6s If you want to remove the glovebox to get to it more easily: kzbin.info/www/bejne/mXLPgJJtqL-HasU Hope this helps and thanks for checking out the channel! Subscribe for more videos to come!
@RobertoPerez-ln8bd6 жыл бұрын
How To Escape: DIY, Tips, and Reviews i already got the code but still cant do it
@stevel3o76 жыл бұрын
I used the factory reset code process, many times, but the prior owners code does not erase; I am using the factory code I read off the fuse panel and confirmed that code works to open.
@spotonndiyvids60656 жыл бұрын
Doesn’t work 2013 escape titanium
@HowToEscapeDIYTipsandReviews6 жыл бұрын
Hmm- sorry for the lack of success and thanks for posting- How far have you gotten in the sequence? Have you had success entering with the factory code?
@armanavagyan52745 жыл бұрын
I forgot the factory code , how can i reset the code on the door ?
@RalphGrey-bc8kt5 жыл бұрын
I was goning to ask the same thing
@HowToEscapeDIYTipsandReviews4 жыл бұрын
Sure- the factory code is also located behind the glove box on a sticker- check out our channel for "LOCATING YOUR FACTORY KEYCODE"
@Prayfervently3 жыл бұрын
Can you delete the factory code?
@HowToEscapeDIYTipsandReviews3 жыл бұрын
Hi Kim! Unfortunately no- it is permanent with your vehicle. Consider it an ultimate fallback option if you forget your personal code- thats why the factory code is on the little card with your manual. IF you don't have the card, or need the factory code, its located behind your glove compartment in the front passenger footwell! There's a video on our channel about locating your factory code.
@dralalshahi4 жыл бұрын
Pleaaaas My taurus 2015 keapad be opened by any five digits I go to setting to erase and add new 5 digits after i tried it keeps opened by any 5 digits which is make me affraid to Be stolen
@HowToEscapeDIYTipsandReviews4 жыл бұрын
Wow- ANY digit combination opens the door? I have never seen that before. I'll see if anyone else has been having that issue.
@joeygarcia66474 жыл бұрын
Thanks for letting me know that on the internet 🗝😈
@TADDs1013 жыл бұрын
Only if your fob is on you though right? Leave your fob in the house and then go try ... i bet then it don't unlock with just any code
@jonerijuseppi30475 жыл бұрын
If you erase how do you set new code
@turkialghamdi22603 жыл бұрын
Hi, will this procedure work if I change the door ?
@turkialghamdi22603 жыл бұрын
I had to change it from yard after an accident
@HowToEscapeDIYTipsandReviews3 жыл бұрын
It should all be the same procedure but I can't guarantee the factory code will be the same. I would THINK that the code is stored in the computer in the cabin. However, I haven't ever swapped a door and verified. If you already have the door and your factory code for your vehicle it wouldn't hurt to try! The code on your vehicle is also located behind the glove box in the passenger footwell if you need it!
@alleymoe Жыл бұрын
I THINK YOU SHOULD BE GLAD TO OWN ONE ?
@t.lee.p91823 жыл бұрын
What if I don't know the factory code
@HowToEscapeDIYTipsandReviews3 жыл бұрын
Hi Tracy! There are other ways to find out! Check out this video here- hope it helps :) you can also remove the glove box to see it better and we have a video for that too:) please let me know if you have any other questions kzbin.info/www/bejne/nJC2pHydiLagj6s
@t.lee.p91823 жыл бұрын
@@HowToEscapeDIYTipsandReviews oh yes, I watched this one yesterday 😊 thanks for replying. I'm not nimble enough to do this one lol... I don't know why the owners manual didn't come with my escape, maybe I'll call the dealership 👍
@HowToEscapeDIYTipsandReviews3 жыл бұрын
@@t.lee.p9182 cool! Glad you saw it. The code is actually in a wallet sized card that is separate from the manual but if the manual is not present then the card is less likely to be as well :P I wish you the best of luck!
@Kuma03373 жыл бұрын
How do you find the factory code I dont have the card with the code on it
@HowToEscapeDIYTipsandReviews3 жыл бұрын
Hi Marcus, the code is also located behind the glove box in the passenger side footwell- its a tad difficult to get to but its there! Check out this video here and let me know if you have any more questions:) kzbin.info/www/bejne/nJC2pHydiLagj6s
@42luke933 жыл бұрын
How can you make it that the alarm wont go off when you use the actual key? I hate it when I get in the car with just the key. It's like a bomb, a buzzer giving me 10 seconds to put key in ignition before the actual alarm goes off. It's stupid.
@HowToEscapeDIYTipsandReviews3 жыл бұрын
Woah! I dont think I've encountered that before- has it always done that? So do you unlock it remotely with the key and it just starts going off???
@42luke933 жыл бұрын
@@HowToEscapeDIYTipsandReviews When I uses the keypad on the door or the key fob it doesn’t go off. However if I manually use the key to unlock the door. A small buzzer ding goes off inside the car and after around ten seconds if the key is not in the ignition the car alarm wil go off. I wish I could disable this system since I like manually opening the door. Unsure if you know a solution. Thank you!
@HowToEscapeDIYTipsandReviews3 жыл бұрын
@@42luke93 That's odd- I've never heard that before- it sounds really frustrating to be honest- do you have an aftermarket / replaced key by chance? Do you know if there is an aftermarket security system in your Escape? What year and trim is it?
@asily41446 жыл бұрын
Ford Fusion SE 2015 model kapı kilidini bilmiyorum yardım edin..
@7prs9657 жыл бұрын
Question: do you have to illuminate the keypad before entering your code to unlock? The keypad is difficult to see in certain lighting.
@HowToEscapeDIYTipsandReviews7 жыл бұрын
Good question- I think so. I usually swipe my hand down it once just to make sure it's on and ready to receive your input- you're right about it being a bit fickle sometimes. I've found that it's a lot less responsive in heat as well - especially as a black material, it can get pretty toasty!
@leadeditoratasgardian31242 жыл бұрын
I took a video of mine with my iPhone.
@Bohemianbiker1k3 жыл бұрын
So factory code can't be erased bc its used to reset custom passwords. Am i correct? Factory password always works
@HowToEscapeDIYTipsandReviews3 жыл бұрын
Correct- factory code is a permanent fall back in case you forget your code or the car is resold. One factory code, one customizable code
@aliouneniangbeugumourchidt88722 жыл бұрын
How to enter a keyless code if it’s 16559 ??? After pressing the 1-2 button do you have to press the 5-6 button 3 times and then to press the 9-0 button🤷🏿🤷🏿🤷🏿
@quamereross4376 Жыл бұрын
Yes exactly! And being so honest. It’s kinda weird but yes.
@Nolongerbroken_507 жыл бұрын
I did it like 20 times and nothing
@HowToEscapeDIYTipsandReviews7 жыл бұрын
Tina Forbes ugh- I'm sorry that's got to be frustrating- So you WERE able to find your factory code then? Did you happen to try out in the heat of the day? Our FE keypad will get wacked out if it heats up in the sun... just a thought... Did you get it to the point of the factory code working to unlock the doors? before even trying to reprogram?
@Nolongerbroken_507 жыл бұрын
How To Escape: DIY, Tips, and Reviews haha ok don't judge but the letter was an L that kind of looked like a 7 so I was reading it wrong but I got it and now I am like keyless like what 😋 thank u for all ur help
@HowToEscapeDIYTipsandReviews7 жыл бұрын
Tina Forbes EXCELLENT!!! glad to hear it!
@anthonybradley58105 жыл бұрын
Gave an ex my factory code. I wish I could change that one. I didn't know I could create personal codes
@vahes86207 жыл бұрын
Isnt working out for me. Got the factory code from turning on and off the ignition with both keys but doesnt seem to work
@HowToEscapeDIYTipsandReviews7 жыл бұрын
Hi @Vahe, Apologies for the late reply. Sorry you're having trouble there... I wasn't aware that you could do that with both keys- how does that work? Do you put in one key after the other and then the code shows up on your dash? I know many cars in the US have the card with the code printed on it... Have you figured it out since posting here?
@michaelcannon81987 жыл бұрын
Vahe Ghazarian c
@jamesclarke58152 жыл бұрын
The erase didn't work
@alleymoe Жыл бұрын
I THINK FORD MAKED THE FIRST SMART VECH. YOU HAVE TO LEARM IT ?
@QthAgR84 жыл бұрын
I don’t have the code it was changed to but I have factory code. When I do the steps to erase all codes and enter a new one nuthin happens. Any ideas I have a 2011 sel Factory Code is 67583
@Dylanset154 жыл бұрын
QthAgr8 i have a 2012 and i don’t know if is the same way to reset the code I need help too
@elnegritopanameno62035 жыл бұрын
Now if I only had the factory code
@savageangel50585 жыл бұрын
Seriously tell me bout it. Have yph figured out any other option.
@savageangel50585 жыл бұрын
I was thinking what if autozone plugs in there CP on it and is able to tell us the factory number so we could re program bruh???
@trunk12555 жыл бұрын
@@savageangel5058 your factory code will be inside the fuse box located on the passenger side under the glove box. It's on a white sticker.
@HowToEscapeDIYTipsandReviews5 жыл бұрын
Check it out here like @trunk says- it's behind the glove box: kzbin.info/www/bejne/nJC2pHydiLagj6s
@elcabbasov53254 жыл бұрын
Hello my cart ford fussion 2012 model Door Do not use the door lock so please help me unlock that code. I am very fond of Azerbaijan facebook adres
@michaelmyers84184 жыл бұрын
They made my factory code 13579. 🤦🏽♂️🤦🏽♂️ literally just press each button and my fuckin car opens. How do you get rid of the factory code???
@HowToEscapeDIYTipsandReviews4 жыл бұрын
Unfortunately the factory code never goes away- thats your default code to use to erase a personal code- consider it a fallback. Not the best idea, but I get what Ford was trying to do... sorry I can't help you erase the old one. Wish I could