HR Tested: 94% Brighter LED Bulbs for the 2009-2018 Dodge Ram with Projector Headlights

[@tristansimmons2147]

I literally just installed the GTR Ultra LED low beams on my 14 Ram. I couldn't be happier with these lights. I plan on purchasing the high beams as well. Thanks for the video.

[@beauc79]

I love these lights!!!!! A little tip for the PWM module; I used double sided tape on the tape and attached them to the top of each headlight light casing. No tension is on the wiring and doesn’t look like they are going to budge. .

[@HeadlightRevolution]

Good tip! Thanks for your comment!

[@squid98989898]

I am still waiting for the best option on a 2019 Jeep Grand Cherokee. I will order bulbs the day you put out the video.

[@HeadlightRevolution]

It’s on our list I promise!

[@monsoavg9]

Same

[@squid98989898]

How far down is it on the list? Still waiting here...

[@AndrasLOHF]

I put the GTR Ultras 2 in my 2017 Edge and the difference was absolutely amazing. I legit went and got an eye exam thinking I was losing vision driving at night. Turns out my vision is fine and the stock halogen in the Edge is just garbage. Easy install and they fit with the stock dust caps. Daytime running lights work fine and I get no errors on the dashboard. Just needed to rotate the bulb to get the chips at 3 and 9 to get back to the stock pattern.

[@Vortechtral]

Hey, I run a 2013 Edge and really want to get LEDs as well. Been looking into the S-V4's when they first came out but been lazy. Now that the GTR Ultra 2's are out I want to get those. How are they with rotating? I know with the S-V4 they have a small set screw that you need to constantly take in and out to adjust. Just want as much info as I can get before getting and doing anything.

[@HeadlightRevolution]

The GTR Ultra 2 can be completely adjusted, You won’t have any trouble with that!

[@AndrasLOHF]

Michael If the 2013 runs an H11 bulb it’s exactly the same adjustment with a little screw.

[@85montess1]

Dude you're looking like a lean mean fighting machine! lol took a min to realize it was the same guy from a 2018 video

[@HeadlightRevolution]

Thank you!!!

[@TheCarCrazyGuy]

I tried Diode Dynamic's SL1's in my 2019 Fusion, removed them and installed the GTR Lighting Ultra 2's and they are awesome!

[@HeadlightRevolution]

Awesome! I’m glad to hear you like them.

[@MegaDiamond6]

Did you have any issue getting the ultra 2 into the fusion and behind the dust cover?

[@josecollazos6]

Why did you get rid of the SL1 ?

[@TheCarCrazyGuy]

@@MegaDiamond6 it was fine. I had to aim the projector down to get them to slide in. Very tight working space.

[@TheCarCrazyGuy]

@@josecollazos6 Beam pattern on my 2019 Fusion was terrible with the SL1's. DD no longer sells headlight bulbs. Not street legal.

[@bernadinejohnson6555]

Awesome video I thank you for time and video.

[@HeadlightRevolution]

Thanks for watching!

[@brianhahne9623]

Let’s see these compared to the new morrimoto 2 stroke 3.0’s in these housings

[@AndrewH91]

I bought the new morimoto 3.0 leds for my 2016 2500 and sadly they don’t fit with the dust cover. I even purchased the deeper dust cover and still no luck. I have to exchange them now.

[@TheRealJesseStoltzfus]

So much more complicated than my 05. 3 10 mm bolts, and the whole housing comes out.

[@HeadlightRevolution]

Yep! Sadly, a lot of new vehicles are a lot more difficult to change out the headlight bulbs.

[@kiwiaudio8462]

put tape on the bumper cover too. Lower grille tabs can scratch it badly. I found out the hard way !

[@HeadlightRevolution]

Good advice!

[@jj_cruz]

I just recently installed these in my '18 dodge charger, and I'm very pleased with the performance. I previously had the GTR Lighting HID kit installed, and I'm glad I went this route. So if anyone is one the fence on spending a high dollar amount for these LED bulbs while also looking to improve your night time visibility... I say go for it! You'll be just as satisfied as I am. Being able to adjust these LED bulbs is just another advantage that my prior HID kit didn't have. 👍

[@HeadlightRevolution]

That's great to hear, thanks for watching Jojon!

[@FOEKING-zv4su]

How much was it

[@beyerdr]

very helpful video. The factory housings are great for focusing an LED beam and not blinding everyone, but the info in this video is gonna save me some frustration, especially that rear dustcover. yeah i could probably dremel out some holes in the stock one but this looks much cleaner,

[@HeadlightRevolution]

Glad this vidoe helped you out, if you need anything else just let us know! Have a good one!

[@williamhayes9565]

Do not have to remove the grill. 12 inch extension on a ratchet for bottom headlight bolts

[@scottmorey9055]

Yeah..... i did it the way you mention and broke the bottom tab off my passenger headlight. I don't recommend doing it this way. Its about the same amount of work to take the grill off as it is to fight with the bottom bolt on the headlight. difference being I didn't have to plastic weld my drivers side light back together.

[@brenthemingway2956]

@@scottmorey9055 I can change my headlights in 20 minutes this way never broke anything theres no reason to take off the grill

[@scottmorey9055]

@@brenthemingway2956 cool. I have sausage fingers. Its literally 30 seconds of extra work to take the grill off and you dont need a foot of extensions.

[@brenthemingway2956]

@@scottmorey9055 I feel the longest it takes is the stupid flap in the wheel well lol

[@scottmorey9055]

@@brenthemingway2956 its the hardest part for me. Its hard for me to maneuver my hand in there to grab that damn plastic thing to pull/push on it. I've nearly cut myself a couple of times. Big hands are not a blessing when working on your own vehicle.

[@radamespenaburgos5783]

Good work

[@HeadlightRevolution]

Thank you! Cheers!

[@jeffmoore5547]

These will work on my 2018 Ram Laramie

[@HeadlightRevolution]

They sure will!

[@PhilShenton]

FYI I didn't need to use the second PWM for the high beam on my 18 RAM. When it was plugged in the high beam did not work. But works perfectly without it.

[@HeadlightRevolution]

That’s great! These Rams can be hit-or-miss when it comes to the high beam.

[@Mario-ig8kb]

Hey Phil did you also need the PWM for the low beam bulbs i have the same year Ram as you do and i totally missed that i had to purchase the PWM's

[@PhilShenton]

@@Mario-ig8kb Yes needed it for low beams and fog lights but not high beams on mine. When I plugged in PWN to highbeams they didn't work. I've had no issues at all.

[@Kiwi-ot3wz]

The grommets fell out because they are too small. The holes in your fancy dustcover are 28mm and the inside of the grommet on the GTR.A015 passthough harness is 21mm. They cannot be seated as they should. Obviously the two chinese companies involved do not communicate. I ended up not using the pass through cables and stuffed the antiflicker modules inside the cavity. It is tight but can be done. I was assured by HR there was no problem doing it this way. My question is this: The GTR Ultra 2 low beam bulbs have a fan and if i plug the large holes in the dust cover, will they run hot ?

[@duvielhernandez2887]

Bought the gtr lightning ultra 2 for my 2019 silverado 2500 10 months ago and just today one just went out . Very bright but didn’t last. Calling gtr tomorrow to see what they can do about it. Anyways just installed the morimoto 2 stroke 3.0 to try them out while waiting to see if the gtr have warranty. Disappointed so far with the morimoto not as bright as the gtr.

[@HeadlightRevolution]

We can send you a bulb under warranty.

[@duvielhernandez2887]

@@HeadlightRevolution yes please still waiting for gtr and these morimotos are not that bright.

[@duvielhernandez2887]

@@HeadlightRevolution let me know how i can do that with you guys ?

[@johnchen9336]

It doesn’t fit 2018 ram 1500 with projector headlight . Unless you buy a after market extended dust cover . Also if you only change the low beam you don’t need the pass through harness

[@terryliles9529]

Those tabs on the grill do break. I've broken them and they are a dealer only purchase. $8 a piece.

[@HeadlightRevolution]

There is not any D bulb types for the Ultra 2

[@Kiwi-ot3wz]

There is no mention of clocking either of these bulbs ???

[@PondstompingAdventures]

Any comparison on the reflector headlights for say the 09 -12s. Very interested in these. Glad you have extended dust covers.

[@HeadlightRevolution]

Yes we have a full video on them on our channel! Not only that, You should check out the Morimoto XB Headlights for these trucks. They are amazing.

[@911Fuser]

@@HeadlightRevolution link?

[@1nickadair]

What about swapping the projector for an aftermarket one? With a true HID or LED projector kit?

[@garretttate3076]

Can you do this without pass through harness and keep it one connection u set the dust cover

[@HeadlightRevolution]

For This gen Ram you will need the passthrough because of the trucks electrical system. There are people that have used OBD readers to correct this issue though.

[@bryanyoung2220]

Just starting my search for LED upgrades and wondering what the difference is between your kits and just a replacement LED bulb. Big price difference.

[@HeadlightRevolution]

Our kits are tried and tested, and include a warranty that a lot of other companies don't include. Most LEDs on the market create excessive amounts of glare and blind oncoming traffic. The LEDs we have tested and sell on our website have all proven to be high quality options.

[@Westphx07]

I need that product asap

[@HeadlightRevolution]

Shoot us an email and we will get you set up! [e-mail]

[@blakeosgood4394]

What aftermarket headlight housing are those? I like the clear lens with black inside housing.

[@HeadlightRevolution]

These are OEM.

[@travismagera9506]

2016 dodge 2500 with projector headlights, are the leds supposed to face left and right in both highbeams and low beams? Not up and down

[@HeadlightRevolution]

Left and right!

[@xeroxboy01]

Im upgrading my offroad 2016 ram with oem projector lights as is original came with the standard reflector headlights. I am buying a special harness to be able to use the projector lights. My question is. With your wiring included in these LED lights, would I still need that projector harness or does your wiring kit can hook up directly to my wiring that was set up for original reflector headlight. Thx

[@HeadlightRevolution]

With those lights and that harness, you will still need the harness as that plugs into the back of the headlight housing via one connector, then disperses the power inside the headlight to the individual bulbs. Our bulbs will work just fine in your vehicle, you will just need to make sure that you select the projector specific kits on the website! Link: headlightrevolution.com/vehicles/dodge-ram/2009-2018-dodge-ram/

[@tychristensen5732]

To change the headlight bulbs you have to take off the grill and completely remove the headlight assembly? What a ridiculous design Dodge did on this, I've never had a vehicle where I've had to completely take off anything to switch out the bulbs.

[@sunshinemodels1]

its because its not a typical bulb swap

[@leehancock2782]

Grill doesn't have to come off. Long extension and grill doesn't need to move

[@zacharyhosler4893]

Just ordered ultra 2s for a 15 taurus hoping they perform well

[@HeadlightRevolution]

You’re going to love them.

[@zacharyhosler4893]

Just need them to ship I paid for next day air 🙃🙃

[@johndrake2705]

Why do you have to remove all that stuff??? Two 10mm bolts and the leveler and the head light pops out. No grill to remove and the top cover pull one tab and fold over. Simple and easy.

[@HeadlightRevolution]

Thanks for the tip. We do these videos on how the manufacture says to disassemble the vehicle just so there is a standard guide to follow.

[@ryguy903]

I thought having he LED bulbs weren’t much brighter than the halogen bulbs that’s why I opted for the HID kit..

[@HeadlightRevolution]

That was the case for many years. These newer LED bulbs perform very well.

[@bencox7439]

I am not seeing these headlights on your page. I only see three option for my 2017 Ram 2500 w/project. All three options say by HR...there are no GTRs...

[@RedC63AMG]

Did this conversion on my 2017 1500 and the difference is amazing. I also blacked out the horizontal chrome slats while I had the grill removed. I want to upgrade the vertical foglamps next. I understand that I need a 9006 style bulb but should I get the CSP Mini or the Ultra 2 that I used for the low beams?

[@HeadlightRevolution]

So glad to hear that you liked those upgrades, we are happy to get your next upgrade going for you! You could totally use the Ultra 2 LEDs for fog lights, or the CSP Minis, but for right around that same price I would recommend just going all the way with the Morimoto XB LED Fog light housings for your truck! They will produce an even more usable beam pattern, and will get you that updated blacked out design that it seems you are going for! Link: headlightrevolution.com/morimoto-xb-led-dodge-ram-vertical-fog-light-housings/

[@beauc79]

Morimoto XB!!! Loving the look of the set up on my 2016 Ram 1500 Sport.

[@kiwiaudio8462]

I realize this video is over a year and 1/2 old now. Im considering both GTR bulbs in this video for my 2014 Ram with projectors. These are now available as separate Low beam and high beam kits that include the PWM harnesses and larger dust covers, so the question of what exactly is needed is now unnecessary. However - There is no mention of the Pass Through harness in these kits. Can you clarify this please ?

[@HeadlightRevolution]

Reach out to our CS team, we can better explain everything there! 218-755-5200 [e-mail]

[@joe7528]

I bought Alpharex G2 pro headlights that has H7 bulbs what is the BEST led bulbs?

[@HeadlightRevolution]

Morimoto 2Stroke 3.0! www.headlightrevolution.com/h7-2stroke-led-bulbs

[@Fangtian0303]

I want to upgrade both high beam and low beam on my 2014 Ram 1500 with projector headlight. I will need a pair of CSP mini bulbs for hight beam, a pair of ultra 2 bulbs for low beam, 2 pairs of PWM models (one pair for low beam and one pair for high beam) 2 pairs of pass through harness (one pair for low beam and one pair for high beam) a pair of dust cover, right? Just to make sure I order all I will need in one order.

[@HeadlightRevolution]

That is everything that you'll need!

[@AryanTeddy]

Do consider doing an upgrade on Ford Ecosport both Low and High Beams. Thank you

[@HeadlightRevolution]

Send us an email to [e-mail] and we’ll go over a few options with you for your vehicle.

[@AryanTeddy]

@@HeadlightRevolution Yes I've sent you guys the mail. Thank you for the customer support. Looking forward in buying the headlights for me and my friends in our club.

[@Cre8tiveLicense]

Are these good for all 9012 applications? I have a 2013 Chevy Volt with OEM Halogen 9012 bulbs.........

[@HeadlightRevolution]

Yes they are good for almost all applications, Especially your Chevy.

[@Cre8tiveLicense]

@@HeadlightRevolution Thanks, guys. I'll start saving for the Ultra 2s.

[@jaredwollan1952]

Thinking of doing this for my 2014 Ram. Is the PWM module absolutely necessary, or can I just change the trucks factory settings to LED?

[@SamuelGarcia-ey9kh]

im interested in this too. Can we use the OBD and AlfaOBD to change the settings to eliminate issues and PWM

[@CrimtideStreams]

Question.. if I buy the Ultra 2, and the CSP Mini, for my 2015 RAM 1500, how many pass through harnesses and PWM modules do I need to purchase? You have the "needs" listed but it's confusing me.. do I need to buy 4 harnesses and 4 PWM modules total, meaning 2 kits? Or do I need to buy 2 harnesses and 4 PWM modules.. essentially what I am asking is does one Harness kit cover one side? Or do I need to buy 1 kit (2 harnesses) for each side?

[@HeadlightRevolution]

Hello, call or shoot us an email and we can happily asset you with your Ram. Phone- 218-755-5200 Email- [e-mail]

[@TyNeePen15]

Just ordered a set of these for my 2015 Ram about 10 min ago for 9012 low beam. I've been using VLEDS for years and I was very impressed with them. But when I learned about these I had to try them. Can't wait until they get here. Just a quick question, how come you didn't use the Ultra 2 in the high beam? Fitment issues? I have the extended housing covers because the VLEDS high beams wouldn't fit under the factory covers. I'm just curious to see how much better the Ultra 2 would've been. Thanks.

[@asdetailshop]

Have you installed them yet?

[@TyNeePen15]

@@asdetailshop Nope. I just looked on UPS tracking and they should be at my house by Friday then I have to either drive home (4 hrs away) or have them sent to me (I currently work in a city 4 hrs from home and I only go back on long weekends or every other weekend).

[@asdetailshop]

@@TyNeePen15 lotta work for some bulbs lol let me know if they’re worth it. I have a ‘13 and the bulbs SUCK. safe travels.

[@HeadlightRevolution]

Those bulbs would work perfectly except for the fact that you have a 2015 Ram. Those 2015 model year MOPAR vehicles did not work with almost all aftermarket lighting due to one little change that MOPAR made to their lighting system, and that causes issues with most aftermarket lighting. These should work for your low beams, but if you have any issues with those just let us know! Have a good one!

[@TyNeePen15]

@@HeadlightRevolution thanks. I've had VLEDS in my 2015 Ram 1500 RT in the highs/lows and fog lights since the truck was brand new. They've been very good up until recently. The driver side shuts off automatically after a few hours of use. I suspect the fan is no longer working and overheating as that's what the problem with my fogs are. Can you use the ultra 2's in the high beam?

[@TattooedNSnappedBack]

Is this the best light for this truck i have a 2015 laramie 2500 and was looking to upgrade my lights but i want bright

[@HeadlightRevolution]

This would be the best!

[@Armyani]

Were can I get this kit for my 2018 RAM sport with projector headlights. OEM lights on this truck is really bad.

[@HeadlightRevolution]

You can view that, and all the lighting upgrades we have for your vehicle right here: www.headlightrevolution.com/american_trucks/dodge/ram_09_18

[@juniorsarmiento7292]

Which one would go down further on the road?

[@HeadlightRevolution]

The GTR Lighting LEDs were the best in our testing.

[@rickjames9477]

The thing you gotta remeber is it’s all fine a dandy, you’re bulbs are so fuckin bright it’s like u control the sun with the wonder stick beside your steering wheel... but if every cop you pass needs to pull u over to tell you your headlights are too bright that’s gonna get pretty annoying. I notice already way to many people with what i would consider to be an LEDuograde that are way to bright for oncoming drivers. It typically isn’t that they’re pointed wrong or have a bad cut off line either ( although sometimes it is) There’s a reason many companies only go a bit brighter then stock enough so you see well yet you don’t blind people like they’re being touched by an angel.

[@HeadlightRevolution]

When you see those aftermarket headlights that are blinding you or other oncoming traffic, that is actually not the fault of the bulb at all, it is installer error! When installing any new headlight bulb, even halogen, you may have to re-aim and align your headlights as moving that bulb socket can knock it around a little. With that said, when a bulb is miss-aligned you will be blinding oncoming traffic, and not getting the correct beam pattern which is not safe! I have linked a video on how to properly align your headlights and bulbs here: kzbin.info/www/bejne/hXrSqGiPnMmFqNE

[@alainlachance4665]

so in my RAM projector led orientation has to be set 3h-9h ?

[@HeadlightRevolution]

Correct!

[@maddawg882]

Does this whole set up work for a 2011 ram 1500

[@HeadlightRevolution]

I would suggest reaching out to our CS team so we can go over some options with you! 218-755-5200 [e-mail]

[@iaminyouout1813]

Need a set up with dust covers for a 2019 kia forte !!!

[@HeadlightRevolution]

Not sure if we have the dust covers for your vehicle, but we should have the right sized bulbs! If you send us some images of where your headlight bulb is installed on those OEM headlights, we would be able to confirm fitment and get you a good recommendation!

[@李奎憲-j2p]

@@HeadlightRevolution I I I I iiii I I I I I I in I I iii it ok I I I I I I I I I I I I I I I I I I I I I’m iii iii I have no problem problem iiii I I I I I iii I I iii do I do that I I I I I I I I I I I iii I I iiii I I I I I I I I I I iiiiiiii it to I iii iii I I I iiiii I iiii it Is iii I iiii I I I I iiii I I iii I I I I I I I I I I iii I I I. I I I I ii I I I I I iii I I I I I I I ii I I I I I don’t care I I I don’t I have. I ii I I I I ii ii I I I I. I i. I i the game I have played this. I have been on my phone version with. I I I I I I ii I don’t want it for I I vi the i. I I I am. ok vvvvvvivivvvivivivivvvivvivvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvuvccccccccccccccccccccccgcccccccccccccccccccccccgggggcccccccccccccc

[@Seananigans220]

can you guys do any videos on the AlpharexUSA headlights for these trucks?

[@HeadlightRevolution]

We actually will be doing some reviews on them in the near future!

[@davereeves1967]

@@HeadlightRevolution did this ever happen?

[@irishuwould5185]

I have a 2007 Suzuki Grand Vitara with projectors and was wondering if LED or HID will be a better option over halogen. Idk which one to go with

[@HeadlightRevolution]

I can't recommend those bulbs to you for street legal use, but for an off-road application, the HIDs would produce more light output, and get you a better beam pattern in that projector!

[@Oncebitten10]

On a 2015 Ram 2500 with factory projectors what part numbers do I need to order to do both low beam GTR Ultra 2 and high beam CSP Mini. I also need the larger housing covers and all required harnesses. The website was a little confusing for me to make sure I am ordering everything I need. Is there a complete kit? Thanks.

[@HeadlightRevolution]

We haven't had a chance to put together a vehicle specific kit for this yet, because we've been working on building a new website. But here is everything that you need! GTR Ultra 2 Low beams: Pass Through Harness: headlightrevolution.com/gtr-lighting-9005-9006-style-pass-through-harnesses-with-grommet/ Dust Covers: headlightrevolution.com/pair-of-dodge-ram-2013-18-projector-style-headlight-dust-covers-33402c/ PWM Modules: headlightrevolution.com/gtr-lighting-pwm-interface-module-9005-9006-style-connectors/ Ultra 2's: headlightrevolution.com/9012-gtr-lighting-ultra-2/ CSP Mini High beams: headlightrevolution.com/2009-2018-ram-led-headlight-bulb-upgrade-single-beam-projector-9005-high-beam-gtr-lighting-csp-mini/ If you have any other questions, feel free to shoot us an email! [e-mail]

[@chrisb9900]

Ultra 2s vs HIDs next pls

[@HeadlightRevolution]

While we didn’t do them in the same video, We do have a separate HID video for these trucks if you’d like to see how they perform!

[@manuelibarra9076]

@@HeadlightRevolution what would be brighter led or hid for this low beam projector headlight i have a 2015 ram 2500 with oem projector but I’m debating if I should get led or hid please respond I’m ready to purchase

[@shaunkinger2906]

I have the 55w gtr hid kit and am very disappointed

[@bishopgeorge1333]

I have a 2018 3500 dodge ram with projector and wanting to know can I install the GTR CSP Mini for my low beam?

[@GetMoneyCeaz]

What fog lights pair up with these good??

[@HeadlightRevolution]

I would recommend the CSP mini bulbs for fog lights!

[@GetMoneyCeaz]

@@HeadlightRevolution would you have a exact part number?

[@sotiristsingos6830]

I purchased the GTR Led's for my ram low beam projector housing. How should the bulbs be oriented in the housing? Thank you.

[@HeadlightRevolution]

You'll want the LED chips facing left and right!

[@MiguelRPD]

3'o clock and 9'o clock position. Any deviation will affect light output.

[@M88JABER]

Anyone knows if these would fit on a 2014 Grand Cherokee? Am between these and the Morimoto 2stroke 3.0

[@HeadlightRevolution]

I would recommend HID for your Jeep for the best performance!

[@M88JABER]

@@HeadlightRevolution thanks

[@mrdelivery3135]

I have an 08 ram 1500 have you guys did a review for the best lighting, led vs hid?

[@HeadlightRevolution]

We totally have a video for you, I have linked that for you here: kzbin.info/www/bejne/o6vRXoWInN2tmtk Let us know if you have any other questions, we are here to help!

[@eddiepadilla01]

So just to confirm the bulb sizes needed is a 9005 (high beam) and 9006 (low beam and fogs)?

[@HeadlightRevolution]

You will need the 9012 bulb size for this specific vehicle, and the 9005 for the high beam and the fog light👍

[@PNWlawnguy1973]

Does the PWM Module get hot?

[@HeadlightRevolution]

It will get warm but not too hot!

[@Jacob-yx5vz]

Do you HAVE to buy all that stuff they say u need to buy with these led bulbs? can’t you just buy the bulbs alone and plug and play?!

[@HeadlightRevolution]

Yes, you need everything mentioned in this video.

[@Jordan-ch9xo]

Does this one throw any error codes or anything?My HIDs turn on when they want to and that's cause I have the canbus ready ones .. thanks in advance !

[@HeadlightRevolution]

You'll need the right modules in line but they will work!

[@rigoochoa4644]

Where I'm can find the dusk cover for my headlights. Is projector. And I'm like to buy the gtr bulbs.

[@HeadlightRevolution]

What vehicle are these going into, let us know!

[@ramairgt2]

Do you have a H7 led bulb that will work in the aftermarket sport headlights like this style?

[@HeadlightRevolution]

Although we do have that bulb in the H7 bulb size, I am sorry to say that we do not have any that will be for street legal use. I can also say that with most aftermarket headlight housings, they have a hard time fitting the larger heatsink of LED bulbs, so halogen is the best option regardless.

[@josecollazos6]

@@HeadlightRevolution i have a 2014 ram 1500 but mine truck doesn’t have projector headlights ? Did this truck come originally with projector lights if not what website can i buy those ? I have the SL1 already on my stock headlight housing

[@zrowcool]

Do we still need the 2015+ Mopar relay harness?

[@HeadlightRevolution]

With the LEDs, you will not need that harness, but with the HIDs you will need to have that harness installed on any of the 2015+ vehicles. Let me know if you have any other questions!

[@lm23p9e]

Do you have a part number list for all these components. I have a 17 ram sport with projector setup.

[@HeadlightRevolution]

We can sure get you part numbers, but you can't plug them into the website anywhere so you would be much better off just simply following the links in the description and adding the items to your cart.

[@tunedskillsz]

Hey guys, after installing some led lights into my 2013 impreza (reflector style) ive noticed the passenger side has a bit more light going on the road. I have bad ADD and it bugs the shit out of me. Is this actually normal for sidewalk illumination or is there some defect? Ive moved the lights around and both are same. Ive noticed on your ram, it kind of does the same thing. At 1:00 you can see how the hot spot is bigger on the passenger side.

[@tunedskillsz]

oh wow you mentioned it a minute later. My guess its for pedestrians but it really bugs me and im thinking of buying a left hand drive headlight from japan to match

[@ManBearPig617x]

Can't you just aim the headlight to fix this

[@HeadlightRevolution]

We’ve seen this on several Ram headlights, It’s annoying and there really isn’t a fix for it. Sadly, I would bet your Impreza is the same way, especially if you’ve tried switching the bulbs from side to side.

[@Stang50]

So do I have to order pass through harness for both low and high beam? And same goes for the modules. It says pair but is that for just one bulb? Or do I need to order 4 pairs of harnesses and modules? Thanks! I’m ordering as soon as I know what to order lol

[@HeadlightRevolution]

You will need one pair of bulbs, passthrough harnesses, and PWM modules for the low beam, and the same for the high beam! You will only need one pair of the extended dust covers! Shoot us an email if you have any other questions! [e-mail]

[@jhguygih]

How buy these in Canada

[@HeadlightRevolution]

You can find them on our website!

[@eddievelarde9508]

Which pwm module is necessary for the gtr bulbs in these rams? I have the gtr bulb just need to order the pwm module and haven’t been able to get an answer

[@HeadlightRevolution]

These are what you need: headlightrevolution.com/gtr-lighting-pwm-interface-module-9005-9006-style-connectors

[@trvpgxng8785]

I thought LEDs work better with reflectors and HIDs are better with projectors

[@Zero-zn9ci]

Are the GTR lighting ultra 2 street legal in the USA?

[@HeadlightRevolution]

They are not DOT approved or street legal. Any aftermarket LED or HID kit is not legal for street use.

[@johncostello3752]

Are the GTR led's also available for the fog lights on a 2017 ram 1500?

[@HeadlightRevolution]

They would totally work for you in that application! I will need to know if you have the projector model headlights or the reflector model headlights, as the fog light bulb size changed between those sub-models. When you get that to me I will be able to link the correct Ultra 2s that you will need for your fog lights!

[@911Fuser]

@@HeadlightRevolution Reflector type headlights on a 2015 RAM 1500 Hemi. Led Fog lights needed.

[@JuanReyes-do7zy]

How much is for the whole kit for a 2015 ram 1500 with the projector headlights??

[@HeadlightRevolution]

Normally the whole kit would run you around $300. That would include the bulbs, pass through harnesses, PWM modules and extended dust covers. We have a sale going on right now though, Check out the website homepage for details! www.HeadlightRevolution.com

[@badtekker]

I'm looking into these for my 2016 Ram 2500. If I use a programmer to flash the BCM to recognize LEDs then I shouldn't need the PWM Module, correct?

[@HeadlightRevolution]

Yes, that is correct!

[@kirkyenduro7393]

@@HeadlightRevolution So with that said if I buy a pair of high beam bulbs and a pair of low beam bulbs you can just plug straight into factory harness and no pass through harness or extended covers required???

[@mcham0846]

@@kirkyenduro7393 you only need to buy the bulbs without extra wiring. Ive done this and flashed the BCM but still tricky finding one that fits inside the dust cover.

[@kirkyenduro7393]

MCham08 thanks. Was thinking HID in the low and LED in the high

[@mcham0846]

@@kirkyenduro7393 yeah i have that set up cause i dont use high beams as much

[@jerryzhu7556]

Can you make comparison between VLEDS micro extreme with GTR lighting? I haven’t seen any comparison between extreme and ultra 2.

[@HeadlightRevolution]

We'll see what we can do!

[@PitbullSoco]

How hot does the PWM module get exactly?

[@HeadlightRevolution]

The PWM Module will get warm at best, they are designed to be in the headlight housing so heat will not be an issue! Let us know if you have any other questions!

[@lawrencekiptoo7420]

Is the gtr ultra 2 plug and play in Mercedes Benz w211 e220?

[@HeadlightRevolution]

It may need an additional module, but it’ll be totally plug and play. Send us an email to [e-mail] and we’ll make sure to get you exactly what you need for your vehicle.

[@bishopgeorge1333]

So I have a 2018 ram 3500 SLT can I install LED's headlight in my reflector type housing?

[@HeadlightRevolution]

You can totally do that, but they will not be street legal. The only street legal option we will have for you other than halogens will be the XB LED Headlights from Morimoto, I have linked those for you below! Let us know if you have any other questions, we are here to help! Have a great day! Link: www.headlightrevolution.com/morimoto-xb-led-dodge-ram-1500-2500-headlights-LF520_2?quantity=1

[@kenkoy6723]

Hi, is the Ultra Series LED 9005 will flicker on DRL mode in Camry 2017? Thanks.

[@HeadlightRevolution]

Yes, it will. To fix that, you will need a set of PWM modules!

[@kenkoy6723]

@@HeadlightRevolution Thank you for the response, where can I get the PWM set?

[@HeadlightRevolution]

We have them available on our website! headlightrevolution.com/gtr-lighting-pwm-interface-module-9005-9006-style-connectors/

[@chengyan3056]

Any LED recommended for 2015 Cherokee instead of HID? Thanks!

[@HeadlightRevolution]

HID is definitely the best option, but the GTR Ultra 2 bulbs perform well as well! Bulbs: headlightrevolution.com/9012-gtr-lighting-ultra-2/ Anti-Flicker Modules: headlightrevolution.com/gtr-lighting-pwm-interface-module-9005-9006-style-connectors/

[@chengyan3056]

Headlight Revolution Thanks! Any plans of making some interior light upgrade videos for Cherokee?

[@HeadlightRevolution]

The interior lights are already LED, so they can't be upgraded unfortunately.

[@chengyan3056]

Headlight Revolution I don’t see that info on manual though. Thanks again!

[@nathanhibarger335]

How can I make the gtr lighting bulbs work with reflector headlights?

[@HeadlightRevolution]

They will work great in a reflector housing! Those bulbs do a great job ant replecating that factory beam pattern! Let me know if you have any other questions or concerns, have a good one!

[@caballoproductions2307]

I have 2016 ram with projector! How much this led lights are?

[@matt.108]

$200

[@HeadlightRevolution]

Hello, here is a link to you product we carry for your truck. www.headlightrevolution.com/american_trucks/dodge/ram_09_18

[@johnboyd8706]

So unless you are driving off road only, aren't these bulbs NOT street legal????

[@HeadlightRevolution]

These are not street legal, you are totally correct! This video was posted before the laws changed, sorry for the confusion!

[@miguelaviles6366]

What is your website to buy this light

[@HeadlightRevolution]

Links are in the description, they will take you right to that product listing on our website!

[@Defcon666]

Does gtr ultra 2 make a H1 led ?

[@HeadlightRevolution]

They don’t make one yet, I don’t believe they have plans to at this time.

[@Defcon666]

@@HeadlightRevolution well that sux , H1 is a popular size.

[@HeadlightRevolution]

Give these a shot, They perform well: headlightrevolution.com/v-4-led-headlights-h1-bulbs/

[@911Fuser]

How can I fix the random off problem on my 2015 Ram. I have the anti flicker mogule and the bulb itself has a canbus corrector. They turn on for a good while, but turn off randomly when driving or parked. Then they turn on or sometimes won't turn on at all. The headlights are the classic mirror type not projector. And the bulbs are auxito H11 with cooling fans. Super bright.

[@HeadlightRevolution]

I am sorry to say that there is no official fix out there for that vehicle, that is an issue that you see with any LED or HID product on any 2015 MOPAR vehicle! Your best bet would be to bring your vehicle into the dealership, and have them perform the TSB on the electrical system. Let us know if you have any other questions, we are here to help!

[@nickchildress5339]

Will stock dust cover close over the low beam bulb? Thanks.

[@HeadlightRevolution]

It will if you use the extended dust covers. We put a link to them in the description.

[@theamazinggoldfish8713]

Thank you for the video Sir, but to Dodge for this design, i can't say what I would like to without the fbi coming after me.....😡

[@johnlucaiii9495]

why do you not tell people these are not dot approved and not legal for street use except as fog lights?

[@HeadlightRevolution]

We actually do tell people that, and to even order them from our website you have to select a box either saying that theyare for fog light use, or that they are not for street legal use. This was just an older video that we made before the law changed earlier this year.

[@lqdxoni1]

I want durability and safe bulbs , not ones that blind others.

[@HeadlightRevolution]

Then this is the one for you! As long as you follow our guide linked below on how toproperly align your bulbs, you will not have any issues with blinding anyone! Link: kzbin.info/www/bejne/hXrSqGiPnMmFqNE

[@0thamer0]

Can i use LED in the low beam !???? .. i mean isn’t xenon better And stronger ? Becouse the (lenses) !!!!!?

[@HeadlightRevolution]

We have a video on both now! It’s a matter of preference, they are both good options.

[@owsowmuskwanaistus9213]

I don't know why my high beams point to the moon

[@HeadlightRevolution]

Try aligning them, that should work for you.

[@aleksandrshik9208]

SL1 is flickering

[@HeadlightRevolution]

I believe it was an issue with the camera shutter speed and that particular bulb.

[@samsungost2036]

จิรพงษั 288/117

[@LîNkxUSMC]

Gtrlighting has the worst customer service I've ever experienced. The ultra 2 is absolutely not worth getting jerked around for 4 months then stuck with paying return shipping when their product didn't fit the housing it was supposed to be made for. I'll never give my money to a trash company like that again. They lied to me twice about the bulbs being on their way. Fantastic! They arent even that much better for being over $200. Your money will be better spent elsewhere.

[@HeadlightRevolution]

I'm so sorry you had to go through that! We deal with GTR Lighting quite a bit, and have never ran into any issues. Even though you ordered through GTR, we can likely still help you out with this! What was your order number?

[@elstingergt3374]

Ram trucks have the worst projectors out of all car brands.

[@HeadlightRevolution]

They could definitely be better that’s for sure.

[@therealporter2028]

What is the pass through harness 9006 or H11?

[@HeadlightRevolution]

If you purchase a kit from the link in the description, it will come with the correct harnesses for your specific year, and headlight style!