Huge Dent Pulled 😳 with Suction Cup 🤩 and Paintless Dent Removal.

[@CaptainCurt07]

*4yrs later and your video is instrumental in helping people out in ways in sure you probably never imagined, I really appreciate your level of detail, this is the 1st video I’ve watched of your do I can’t wait to see how much you’ve protected your profession* Thank you! 👍🏼👍🏼

[@randydicotti3975]

Perfectly Splendid! What separates you from the boys is you know exactly where to start the pulling. I would not have known to start on the side you did at this point.

[@paulsonvarghese441]

The videos are well-produced and offer a clear and concise explanation of the techniques involved in each process. The presenter is knowledgeable and provides useful tips and insights throughout the demonstrations, making it easy for viewers to follow along and learn from the video.

[@denttime]

Glad it was helpful!

[@MyGuyKirby]

Thanks for explaining the dent dynamics and how it might have been created.

[@sikskillz2186]

great job. looks amazing. the technique is perfect.

[@victorb2910]

Holy Crap, that customer had to be real pleased, nice work.

[@denttime]

👊 but it was a rental car.. Just kidding. 😊

[@louisbelving1880]

Nice job ! Excellent teaching without the usual drivel! Very easy and pleasant to watch!

[@AlbaderBohamad]

20:36 You are pushing down on the end of the rode to push up on the other end of the rood (under the hood). Meaning there's a pivot point. But where is the pivot point and what is it? is it a hole in the hood (regardless you drilled it or not). If so, aren't you bending the metal at that pivot hole (point)?

[@denttime]

No because the curve in our tools allows use to maintain leverage without damaging the access point.

[@frankpetrie8389]

I am so glad I found this video Mike. I've learned so much from it. Extremely helpful. You DA Man Mike.

[@wayneashby5030]

I really like the idea of thinking about the progression of how the dent was formed and then reverse that progression to pull it out. That was impressive to see that dent removal concept in action and how quick and effective it was!

[@davidfisher4990]

Thanks again Myke! Very detail oriented!! And.... another great repair

[@denttime]

Appreciate it David 👊

[@harshabiliangady3211]

This use of vacuum to pull has been used by the Obstetricians for ages. And is used as an alternative to Obstetric Forceps

[@LuisJrSantos]

Where can I buy the suction cup? Thanks

[@fullmelt977]

Where can you buy the suction cup???

[@vanyastaleva415]

One of the best videos on the topic! Thank you for sharing!

[@donmahone4847]

I tripped across @denttime vids and I'm not PDR nor body repair person. I'm hooked watching how the dents are removed. Way Kewl!

[@awilson2525]

I come back to this one occasionally, because there is so much valuable info in there. Thanks!

[@333BellaLee]

Where does one get a suction cup like this? Thanks.

[@Dentlesstouch]

Great repair Myke !!!!

[@denttime]

Thanks Chris. 🙏

[@kawman415]

Haha...I’ve done the light suction cup a couple times and had the arm pop off! Surely some of that California heat helped.

[@dougyeefresh87]

Can you suction cup any dent? Is it possible to mess it up more especially if you've never done it before?

[@harshabiliangady3211]

A Principle in Medicine for example when a narrower part of the intestines goes into a wider portion called ‘Intusussuption’ it is the ‘part that went in first comes out last’ therefore the centre of the dent comes out last.

[@luciusirving5926]

If a hood is bent, then you should loosen the metal, pull the dents out by any means necessary, put screws on the edge on that hood then hammer rivet pieces or solid rivets in holes.

[@williemcmaster9422]

What kind of pricing should you charge for doing a dent like this? And how hard is it to talk a body shop out of just replacing the hood and repainting? So many?????🤔. You make it look so easy.

[@danwalter6032]

This is the best and most informative video I have seen thank you for this

[@straya_au_]

do you have a link of that suction cup you using looks like can do the job

[@thomaskremer6094]

where do I get this knockdown ?

[@neocatharry2693]

Nice! Where can I buy that suction cop and dent revealer screen and dent hand tool?

[@fullmelt977]

Where can you buy the suction cup???

[@bigilworth]

What is the brand of that suction cup?

[@SteffBotha]

Great Work!

[@JoseFlores-xp9jp]

Where can I purchase the tool! Please attach a link. 🙏🏼

[@pauldaekim6732]

Where can I buy that suction cup let me know plz thanks

[@Tacnicalviru]

Excellent job sir 👌👌

[@AutoBodyEverything]

Also, rather than pushing on every individual micro low with the tip of a rod, if you could fit a whale tail being a panel and slide it back and forth with some pressure, wouldn’t that smooth out the last bits of distortion?

[@xianzhang5089]

What exactly is a crown??...so place puller beneath crown?

[@getspraybyyadacustom1575]

I needed to watch this video put me on game

[@BlueMiStCoDM]

Great analogy and easy to understand. THANKS

[@EAAAA1505]

Where can I buy this tool?

[@marlenerowell3716]

What type of dent puller?

[@billarroo1]

WOW,WOW !!!, that was Fantastic, I understand what you were, saying, it makes a lot of sense, No heat , No glue, Great Video, this is probably thee most, information in the shortest amount of time I've ever seen, Thanks William Orange county,

[@fvalle90]

@Dent Time - San Diego Dent & Bumper Repair Will the be more of the neo flex line board be made?

[@DR19X]

Thanks for the video. Would you recommend this or cold glue or cold for these kind of dents on hoods?

[@denttime]

Cold glue is much better.

[@jasonax1523]

Awesome video. Thank you for your time and attention to detail.

[@denttime]

Thank you!

[@bbaaspencer1]

I took pdr in 2008 and never used a board!

[@samg5543]

I think these hoods are aluminum. That would be good to mention to the viewers.

[@denttime]

Steel but thanks.

[@marciolira8866]

O trabalho desse caras são uma maravilha, só tem um defeito,não só nesse video mas na grande maioria...Falão de mais muita gente pérda a paciência e curte,se torna cansativo esses videos.

[@AutoBodyEverything]

Your sharper black tap down tip, is that nylon? What’s the hardest material for a tap down tip other than tempered steel and polished surfaces? How would you compare those to stainless steel tips, are they paint friendly?

[@emmettcoen]

That cup is probably the best.. The windshield ones are too solid you wouldn't get it to grip/seal

[@DR19X]

What do you mean by windshield ones? Is that the large cup with handle?

[@javanis5151]

Where can I purchase one of those line boards Myke?

[@denttime]

denttime.com/store

[@peternicholsonu6090]

Wash it down first with hot very soapy water and whack a toilet plunger fair in the middle and pull sharply.

[@denttime]

And then what are you gonna do about all the ripples in waves left?

[@peternicholsonu6090]

@@denttime Send it to SAN Diego! I jest...but I once reversed my daughters car onto a post and pushed the rear under fender panel way in! Was horrified.....but in that case it was not a compound fracture and popped right out again. What these guys do is beautiful to watch...

[@williamcattr267]

Where is a good source to get the R4 tool that you are using?

[@denttime]

Dentcrafttools.com

[@gergemall]

Wow , what a great video

[@tanglewood777]

wot does the stripey thing do

[@josephreilly2389]

Wow nice job !! Thats an art !

[@thomaskuttyjose7719]

One of the easiest Mathod to repair the dents

[@jimmyjimmy1038]

Nice job, thank for your video. If I'd to try this, where can I buy this tool?

[@denttime]

Generally try AnsonPDR.com

[@spitfirelast8761]

Would this work on any post 1988 body panels? I don't know if the modern today's car have thinner panel than 1988 or 1995 cars.

[@denttime]

Older vehicles are generally much thicker gauge metal. PDR is still possible for sure but the factors are limited.

[@tarrancormier1481]

very helpful video like the way he explained it

[@ifritThe8th]

Hey man great vid !can I send you a picture of my dent and can you tell me if I can do this same process on my car ?

[@denttime]

Sure. Go to my website and contact me from there. denttime.com thanks

[@kyleaguirre4688]

What type of suction cup is this and where can I get it?! I see so many people asking but no answers!

[@denttime]

Denttime.com/store

[@billseay6399]

Yes makes perfect sense thanks

[@FranciscoHernandez-gt8ne]

WOW! look at how humble these monsters are! Lets learn fellas. Most of the time we forget to listen to another brother that's is trying to help us out. STAY WOKE!

[@123antknee]

AMEN!!!

[@ijazsaeed9640]

Weldone mate. Thanks

[@josephperry4344]

Nice work! thanks for sharing.

[@franciscogalindo3155]

Buenos dias maestro, estoy desayunando y viendo los videos del dia de hoy. Si los videos estuvieran con traduccion al espanol seria fabuloso. Gracias

[@31acruz]

Fantastic work man. Let me ask you if you put another half hour to an hour could you make the zebra stripes as sharp as the other ones? right now they are equidistant and direction-ally correct and the right progressive width but they are jagged, I wonder if with the sharper tool complete restoring could be achieved. I am a car designer by the way and we do the same type of work in CAD pushing and pulling on surfaces with the Zebra-Candy stripe filter turned on so this feels second nature to me. lol

[@denttime]

I have tiers of what customers want to pay. The more perfect they want it obviously the higher the cost. Not everybody can afford high-quality so to answer your question yes indeed it can be improved if they have the budget. Thanks for watching.

[@jameswilson9368]

Hi, you won't believe this, the moment I saw this dent, I said somebody put their fat butt on the car. It was totally obvious. I really enjoy watching someone as talented as you are, also how well you explain what is happening. I'm learning A lot by watching and listening. Thanks for great videos!!

[@sosonic12000]

Excellent.

[@lexluther971]

Hi bro thats sooo amazing thank you thank you for a wonderful lesson

[@janernn]

Nicely done! It makes me hopeful that my newly acquired dent can be removed this way!

[@BoookofPeace]

Great work man, holy smokes!

[@ineverlaugh]

thanks

[@hindustanijoker4416]

how can i learn this.... In India 🇮🇳

[@billarroo1]

I am learning PDR all on my own, I bought some PDR tools on Ebay, I solicit old cars that has PDR type of damage, and try my best on each car or van, I do this FREE OF CHARGE, But with NO GUARANTEE, I WATCH THESE VIDEOS, and apply what I see, i am OK at it now, I found that Glue Pulling gives a major advantage. so if you can't get trained by a pro try it on your own. 😁

[@FH-js6hg]

Very good job,!

[@mostafahassan9419]

This is literally a big ass dent!

[@freak3dot]

I was thinking someone sat on the hood too.

[@alexandrmelichar]

well done

[@ryanw1284ryansrants]

Those swirls are hearting my heart and soul. Just scrap the thing :)

[@willharrington6894]

Nice job!!! I subscribed to your channel , Will from North Carolina

[@kingbotzcustoms]

Damn that was fun to watch, and watch a master at work! Killer job, Myke!! It's also refreshing to see I'm not the only one still using a line-board, I still use my black & yellow ghost-board just like that on on a daily-basis, I love it!! 😎

[@ale91613]

Thats amazing

[@mikekno6922]

used hood same color 20 minutes

[@denttime]

In a perfect fantasy Island world… Yeah that might work.. as long as the paint isn’t damaged, scratched or not faded in the same color tone and shape as the rest of the vehicle… 🙄

[@nikko578]

gracias buen trabajo como consigo esa sopapa??? Excenlente herramienta soy de Argentina

[@mukulrawat62]

brilliant idea line board . Light bulb moment

[@MichaelMashpotato]

Ok.... 😂😂😂 my man uses his suction cup from his mini light 😆😆. I never even thought about this. Fantastic Myke 👏👏👏

[@denttime]

👊

[@Raylee-H]

You maybe was a woodpecker in your previous life 🤣

[@franciscogalindo3155]

Saludos desde Cd. Lerdo, Dgo. Mexico

[@daviddahlgren9603]

I love it , do mine !

[@habebs7345]

Amazing

[@kensmechanicalaffair]

Someone jumped back and flopped on it.

[@garbygarb31]

This video does not need to be 22 minutes

[@atzflores424]

Yes, talk to much

[@like_the_boss]

Someone was laid there ...

[@PloreEnt]

My hood looks similar but all I did was hit a deer on the way to work 😂

[@dht084]

ad scam with fake comments

[@denttime]

Gimme a break. 😂

[@dopeyone4697]

Excellent video and narration. I have to do this tomorrow on my Hyundai accent. Deep dent but near windshield wipers.

[@getspraybyyadacustom1575]

I do body work now and paint thank

[@77petesgarage]

Nice

[@rashidomarov8807]

Good job 🇷🇺

[@travisstamp7428]

That's a straight up sex dent! 🤣🤣🤣

[@ChadGlassify]

Wow 😮

[@ridenfish39]

Looks like lizzo sat on that hood

[@thegusk520]

Cool.