Glue Pull Tab Review and Tapping | PDR Dent Repair Tutorial

[@sydrider6023]

Did my first attempt at this today on my SUV, about 6 door dents, took me about 7 hres but the result is satisfactory and can't wait to see the result under day light tomorrow. 🤞. Thanks for this super interesting demonstration.

[@denttime]

Sure. You should also check out my tutorial website denttrainer.com thanks again

[@floorpizza8074]

How did it come out?

[@DARRELHOPSON]

How long did you let the glue/tab set before you pulled it off? I've a kit now, just looking for advice. Thank you for your reply.

[@mayankkakkar2945]

awesome video, can you please share the link to the light you are using during this task. thanks in advance!!

[@dentdingking4878]

Super nice video Myke! I'm having very good luck with the reaper tabs too. They stretch when I get a really hard pull but they do the trick! I'd rather stretch a tab than fuss forever with a stubborn pit.

[@louistorres]

You are an amazing artist. Thanks for posting your videos.

[@denttime]

Thank you! Cheers!

[@darkquintet1047]

Hes a dikhead

[@hussainal-sarraf5679]

Good job, I wondered if you could show, how the technician could decide the right angle when installing the LED light? Moreover, do all LED lights give the same showing or is there a different type of it? how could I select the best one among them, If I would like to buy it?

[@KarlBrouillette]

Thanks. Really like your demonstration. I had a try earlier before your video and was a bit disappointed. But I feel I can keep trying.

[@TheDentDemonBrandon]

That Camauto adapter looks awesome and those glue tabs definitely get great pulls! 👍👍

[@ramymarty7149]

Thank you so much, I think you helping people with gaining more knowledge in that industry thank you so much for the good deed

[@paulc80]

Clean the surface with alcohol and let the glue dry for a few minutes. I’m just learning myself but I’ve figured that out so far. Also, put the glue on the tab and the dent!

[@vegitoblue7908]

Where can I get that reflection lights that shows the lines on the paint?

[@SswearFrmBkSs]

Did you figure it out

[@vegitoblue7908]

@@SswearFrmBkSs yes. Thanks

[@fishinginkayaks]

where do I get that light with the lines, cool and warm, thanks good video

[@dentevo2259]

Awesome demo, tutorial, and edit Myke! 🔥💯

[@denttime]

Thanks Joe Dentevo.com 👊

[@mikep.9005]

Where can I buy the reaper tabs at. Great video thanks, never mind I watched your video again and you told where to buy supplies. 👍

[@denttime]

Dentreaper.com thanks!

[@billstetler6769]

Excellent demo. Thanks

[@northbaybassanglers1068]

My uncle from north Idaho (DENT HUNTER- Rob Weaver ) completed dent wizard training and is done with his no compete contract and is now chasing hail all the way from Colorado to Idaho. I followed behind him for a year watching every move he makes while he marine corps style explained everything. Finally at 30 years old I’m hooked and want to fully get into it. My only problem is there is no school near me. Closet one is over 3 hours away. With twin girls, wife, and bills a move just isn’t in the picture. What else could I do to get more advanced and become a “technician”? I’m in Northern California

[@VanishingNomad]

Go to the junk yard, buy a junk hood and start practicing.

[@elmiewho29]

@@VanishingNomad exactly what he said. Practice makes perfect.

[@Pap3rPlanesss]

Also from Nor Cal, sucks how every class is more down south! Turning 30 in a couple month

[@floorpizza8074]

I'm fairly certain that KECO does on site training.

[@denttime]

Sign up for DentTrainer.com and when you’re fully committed get some personal PDR training. If you’re serious you’ll find a way to get good training even if it’s far. Otherwise you find an excuse. PDR is hard to lear but it’s worth it if you’re the type who is passionate about it.

[@kodysmith7563]

I need help desperately...I've tried and tried and I just can't get the tabs to stick.. I've done everything exactly the way your showed in video's but the first slight pull and it pops off

[@kcjones2737]

Same problem bro. Especially in warmer weather 🤷🏻‍♂️

[@kylsters]

is it just PVA glue, then isopropyl alcohol to release the left over?

[@ingioern]

Im so hooked on these vids. Imma learn this shit, looks so satisfying

[@denttime]

You’ll love denttrainer.com then 😉

[@francof7720]

The glue looks so good when removing it. By the way, what kind of material are the TABS made of?

[@dailydrivenmedia_]

How much would it normally cost for someone to do just one of those dents on a car door? Is there a specific glue you would use on a thinner paint car like a subaru WRX?

[@Osdol]

Great content. Very thorough and helpful techniques. Very positive energy. Thank you

[@miamirice6840]

that’s some impressive work

[@sanmiguel1166]

Excellent video.

[@osamaalmustafa3405]

Thank you Myke for the demo, I was thinking about buying them

[@denttime]

My pleasure. Thanks for checking the video out. 👊

[@muhammadayaz7440]

Which spray did you use to remove the glue?

[@vincrossi]

Very nice job..greetings from Italy

[@ЧокоБоков]

Excellent work, where can I buy such a lamp? with stripes

[@denttime]

Ansonpdr.com stuckeytools.com and UltradentTools.com

[@RayanTurkman]

This is so professional

[@richdresbaugh9954]

Where you buy the glue and glue remover?

[@rodolfoluiz341]

Perfeito!!! Mesmo não entendendo a língua consegui entender as ações!!!!!! Se puder queria comprar um luz com esses efeitos.....grato Brasil

[@mikejones5772]

that light is awesome.

[@gersonjesusdelreygutierrez3700]

Como y donde puedo comprar sus productos? Gracias por los videos

[@laleyendatattoobizz]

What glue gun are you using that uses the dewalt batt?

[@charlesbass4651]

do you recommend heating up the surface after the alcohol cleaning?

[@denttime]

Absolutely

[@finley614]

That was a great demonstration

[@mikewright4562]

Where did you get your tools from

[@marcustoms]

Thanks for sharing I learned so much.

[@Vision42_]

Exellent bro, absolutely Exellent

[@klanglala7577]

Man this is a great video.

[@christophemartin6340]

Hello what is the model of your lamp thank tou

[@denttime]

Elimadenttools.com

[@fubartotale3389]

The light seems similar to an optical flat, what is it called please?

[@grahamhubsch9610]

Flipping amazing bro 🙌 👏 👌 🔥🔥🔥🔥

[@denttime]

Thanks 🔥

[@GruntMuffin]

Ue are you using by chance?

[@sasa111]

Very nice work

[@denttime]

Thank you. Appreciate it.

[@namtrinh6142]

You are professional 🎉

[@KirksAuto]

That was awesome!

[@luisorellana3392]

Them a pro👍👍👍👍👍👍👍👍👍

[@samuka3887]

Sensacional 👏⚒️⚒️

[@brunohelderbh]

Show 👏🏼👏🏼, parabéns pelo ótimo trabalho, saudações do Brasil 🇧🇷 🙋🏻‍♂️

[@sli8462]

I pulled a dent out almost to perfection... Then I decided to pull once more and created a bubble... Smh. Any idea on how to fix this

[@OnePointLander]

Can you use this same technique on aluminum?

[@denttime]

Yes indeed.

[@yocotobigeri]

Quindi il martelletto lo uso quando il bollo esce troppo, colpisco seguendo le linee fino a raddrizzarle? Il martello si usa solo per sporgenza quando ho tirato trnppo il bollo?

[@valeriehagman4088]

tried to glue pull some dents, pretty successful but not quite there, Tequila glue and reaper tabs small dents and pulled 6-8 times and still not all the way. Hood temp is 70 degrees, I am outside and can't get them all out, about 20. Looks way better but only about 80-90% good.

[@freeskier175]

Nice work

[@denttime]

Thank you! Cheers!

[@arye_amsalem]

I need the name of all.the.products used here and models thanks

[@TheCarlosBrandy]

Great! ❤

[@Boogaisgood146]

whats that thing he uses the entire time with the black handle and the tip touches the car where the light is whats the tool called . .. .... .... .

[@ernestoyap9855]

Just asking,,,is there someone who pushing at the back of that dent or nothing?

[@hokagitumuyuki2925]

I need that kind of pdr lump

[@JaRuuizz]

Jus got the super pdr kit from amazon, the glue def doesnt pull that hard, thats crazy.

[@01XBOSS]

Thank you nice video

[@denttime]

Glad you liked it

[@LaHandleAbhi]

does glue scrape off the paint ?

[@denttime]

No, but occasionally it can pull paint.

[@jnvc7270]

Does tapping ever leave small marks on the paint?

[@denttime]

Yes but not permanent

[@diobasilico4972]

What mm was that tab?

[@fabiolas4]

Scares me doing this because I once pulled the paint off the dent, so it went from a quarter size all the way up to a 3" disaster, no joke... I have a Challenger also and knock on wood I have no dents yet but the day I do, you know damn well I'll be pissed. I have the amazon puller and tabs of what your using.

[@RaymondCrepeau]

nice job

[@denttime]

Thanks!

[@kcjones2737]

Bro how is that glue setting up that fast?

[@ایمانطرقی-ي9ذ]

دسخوش استاد دسخوش به سخاوتت

[@muhammettoker6059]

Perfect 😎

[@RaymondCrepeau]

when tapping down are you on the line our in beteen

[@denttime]

On the line. Thanks

[@shkenctari1]

very good i subscribed

[@officialWWM]

Amazing!

[@ismaelfernandez9019]

What chemical does the bottle have to remove the glue?

[@denttime]

91% alcohol

[@canalcaribeno]

Hi! in order to take the course, don't you need the tools first. Please let me know how much the tools cost so i can't buy it later on near future please, including the light system. Thanks in advance.

[@denttime]

Actually, you’ll want to watch the course first because that’s what it’s about initially is about purchasing tools and how to use them. The most common problem people do when they first try to learn PDR. Is they buy tools that they don’t know how to use or understand. On Denttrainer.com.you’ll see the foundation from step by step. Start with the main course called Ground Zero Pdr Training. You won’t regret it, and you’ll save lots of money, including tool discounts for the tools that I mentioned. Good luck. Thank you.

[@keithlanning7381]

thank you so much for shareing

[@khaledchicho1945]

Thankio

[@razikguerrioune3222]

Good

[@gabryelleresende3525]

Excelent!!!

[@SUBZEROUKS]

Skills.

[@lucianomatos1672]

Good job🇪🇸🇧🇷🇺🇸🌎

[@ahmadghanem2414]

Awesome

[@alvinalvin-g2r]

Greatttt

[@zussstudios7189]

What if the car was vinyl wrapped in expensive colour ?

[@shanejones5885]

Decent video I like how you went into some detail about the tabs but if you have any type of expensive car the owner will lose his mind if you stick your alcohol magnet on the paint. Just fyi. Coo video tho.

[@denttime]

Thanks but you should see when we have to tap down on the paint 😉

[@اسامهسعدونالشمري]

❤❤❤❤❤

[@obsidiansuby]

Ain’t Mike Toledo productions 😂😂😂😂😂😂

[@kimkallestad3017]

Good work but i think it would save u some time if u didn’t pull that hard with the puller, i did the Same thing and i found quickly out that it made the process longer, what i did was massaging the rigger slowly until i saw it was far enough out to massage it back to its place

[@kimkallestad3017]

Hope it is a good tip if u haven’t found it out yet ;-)

[@savage6394]

So, in the second 1/2 of your suggestion you recommend doing exactly what you recommend not to doing in the first 1/2. Pull it “far enough OUT to massage it back to its place”.

[@savage6394]

Which, funny enough, is exactly what is show in the video.

[@mojojoji5493]

Kinda messes with the clear coat but way better than a dent I gotta get my car done

[@lucianomatos1672]

Thanks🇪🇸🇪🇸🇪🇸

[@BetoCuritiba]

Perfeito!

[@jcuadrado9518]

landscape recording please... but helpful vid regardless

[@denttime]

I film only portrait mode now. Thanks

[@wellingtonmendonca2971]

❤

[@edwardjames2508]

تم

[@Nathanisinthe]

Freakin magic

[@vehiclesprayerssociety]

❤💪❤️

[@JairSilva-zw7qq]

OI MEU AMIGO TUDO BEM COM VOCÊ SOU DO BRASIL TO APRENDENDO MUITO COM VOCÊ VEJO TODOS SEUS VIDEOS ESSE VÍDEO QUE EU ESTAVA ESPERANDO COM VENTOSA FAZ MAIS VÍDEO COM VENTOSA PORQUE TO COMEÇANDO AGORA E NÃO TENHO TODAS AS FERRAMENTAS AINDA AQUI É CARAS AS FERRAMENTAS NÃO TENHO DINHEIRO PARA COMPRAR MAIS TO COMPRANDO AS POUCOS OK MUITO OBRIGADO DEUS ABENÇOE.

[@quoteswaislamichannel]

👍👍♥♥♥

[@AntonioCarlos-uc1mk]

muito top parabens

[@martinsinvestimentos6297]

🇧🇷🇧🇷🇧🇷👍🏻👍🏻👏🏻👏🏻👏🏻

[@narceliminator3382]

Try that on an old car wouldn't work only on these thin skinned junk we have nowdays

[@denttime]

Indeed PDR works on older cars. Watch my other PDR videos on the classics. 😉

[@owenheart8888]

Thank you sir.