Hummer H3: How to remove the Center Console Dashboard

In this video I explain how to remove the Center Console Dashboard.
This will give you access to the radio, the 4x4 controller, the ECM, or lighter socket.
Hope this help!
Cheers

[@hassanjassoma5809]

Excellent job very clear and helpful

[@thomasgarza3965]

Great JobBro !!! You went thru the whole process / explained it perfectly... thank you for the heads up.

[@probonomechanic]

Thanks! Appreciate you take the time, and glad if it help!

[@randystyer1176]

Great 👍

[@edsue977]

Thank you so much, that really help

[@probonomechanic]

Glad it helped!

[@makariosazar]

excellent video. One thing I still need help, how do you remove the vents that are attached to the unit? on time 14:18 we can see what seems to be rivets. Do we have to grind them?

[@dasilentman314]

Was it the the dirty controllers the issue with the 4 wheel drive being stuck on, or was it something else ?

[@probonomechanic]

I'm sorry for the delay to answer. The website stopped giving me prompt when someone leave a message. After I opened it it was broken. The plastic shattered behind the button. I didn't want to do a patch work for it to break dowm the road. So since I don't ever use the 4x4 high lock and left it as is. But I will need to change it as I suspect the other buttons will do the same.

[@DavidHernandez-os8mi]

Should I do this if all my center buttons don’t work? My radio buttons do but all the other buttons center dash don’t work

[@probonomechanic]

Hi, So the Hazard lights (top middle button), the heater buttons (fans, heat and AC, the vents), samething for the back wiper?

[@waynehutchinson1423]

Thanks for the video.lt helped. .My 2 cigarette outlets stopped working,checked Fuses 51 +45. They are ok.ls there a fuse I don't know.please.

[@probonomechanic]

Hi Wayne! When you checked the fuses, was there power to them or did they just look physically fine? With the plug behind the outlets removed check to see if there is power to the wires. (Either a test light or a voltmeter.) If it works it's the outlets that are corroded or broken. Edit: if there is power to the fuses, but none to the wires, it means that they are either cut or grounding between the fuse box and the outlets. You will need to follow the wires and see for any damage (it can be a small damage coming from friction or heat.) Hope it helps!

[@waynehutchinson1423]

@@probonomechanic thanks,I think it's the grounded wire. Fuse is good ,no power at the port with a continuty tester.l will pull it apart like you showed ,thanks