SKETCHY Ebay Turbo Single Cam EG Hatch Civic Made WAYY To Much Power!

[@kontemp]

Every time I get my car tuned, I always supply new plugs. And I always make sure my vehicle has no issue. Turners are there to tune your car, not fix and work on it. This is why Hunter gets a subscription from me.

[@aaronkoren2147]

That is crazy that someone would drop that off for a tune when it is in no way shape or form ready for a tune lol.

[@LeapFrog_Radio]

Happens all the time, many tuners won't finish your car for you

[@phantasy2075]

thought he said it was dropped of just for a ecu

[@BoostedNW]

this is the norm lol

[@ClumsyCars]

wasnt dropped off for a tune.

[@anthonylim2428]

Happens more often than you think or see. Lol

[@TunedbyTony]

this is how it always goes. Nobody is EVER for real ready for a tune. Always something that needs figured out before we can rip.

[@joemaggio6806]

That’s why tuners are tuners 👌 they’re generally the 🐐

[@jamzempire]

This car wasn’t even ready to be started let alone tuned.

[@bluegizmo1983]

Good to see somebody who doesn't mind working on a car that's not top notch! Although, even I gotta admit, that car wasn't quite ready for a dyno yet lol. My brother and I recently took his little Kia Spectra 1.8L to the only dyno shop in town, because we wanted to get some baseline numbers for the NA motor before adding a turbo, and to make sure we had the timing dialed in pretty well. It is mostly all stock with just a hand ported head, and we swapped out the factory ECU with a Speeduino DIY ECU, and I'm doing all the tuning myself (I have some self taught tuning knowledge from a few years back). The dyno shop was giving us crap because it was a "bone stock slow cheap kia" and was just rude in general about everything. We didn't even need them to do any of the tuning, I was doing all that myself, they just had to click the dyno button to start/stop runs! Long story short, the fuel and timing were pretty much bang on, only needing some small fine tuning, and now we're in the process of turboing it.

[@mitchweber7868]

Ya just tell him straight up honestly, its a really good idea to pull the head and drop the pan and put vitaras and rods in that thing asap because of course we all know its not going to last long.

[@LeapFrog_Radio]

And a matched set of HunerTuned Injectors to top it off!

[@xxvvvvdjcocopuff1xxz825]

U really think the person who did that fabulous work can Handel that😅

[@AntonioEscobedononidajesus_]

That d15 is not long for this world 😂😂

[@scubamk7gli768]

No sir it is not. First time it sees full boost at low rpm under real load it’s done for

[@ericmiller4285]

That drain line is a beaut... kinked in half with the fitting half installed 🤣

[@droppinghertz9922]

I will admit bro u always like to get peoples shit to tip top with what u got u go above & beyond to look out 4 ur custies most people dnt have the time thats why people fuxx with u hunter ur solid dude in the parts department lol jk if I didn't fuxx with u I wouldn't watch ur videos plus who in the fuxx dnt love Hondas & Turbo content...💪kswap the 🌍

[@SlowDelSol]

You can teach a good lesson with ether a good or bad example. This is great so people will see how silly they look doing even a few of these mistakes on their builds. This one is just crazy tho 😂

[@ChayseLaleman]

How can I stop boostcut from happening on Crome? Bigger map sensor?

[@danchristian7282]

I thought my civic was a little jank but damn makes me feel better!

[@robert-t7d5w]

Man I thought my ek was rough lol satisfying to watch you finger it all out. Do you do any remote tuning by chance? Trying to tune mine myself but having issues with boost tables. Regardless, keep up with the work man. Love all the videos!

[@Bacongrease00]

First time watching your video it was very satisfying to see things get worked out one by one instead of just throwing your hands up. Made a fan out of me.

[@ChayseLaleman]

What gap on plugs?

[@nickclashez]

Love the single cam content

[@SloppyMechanics]

i wanna build a single cam again

[@lsxnapier584]

please do. single jingles need more love

[@mitchweber7868]

Do a d15 matt 🤣🤣

[@SloppyMechanics]

@@mitchweber7868 i have built 3 turbo single slammers

[@mitchweber7868]

@@SloppyMechanics I know I remember watching all of them that you did on your channel I was actually looking back recently wondering if you did another. I'm like hunter idk why but I love Hondas lol, but ls swap stuff is obviously awesome.

[@FakeTaxiTuning]

Dude I love these videos. Trevor is also a pretty good value add. Kids living his best life

[@Brock_Landers]

Man, I havent been able to watch in a while due to work, but I'm pumped to see Hunter still at work on these old girls!

[@Mc-nn4jz]

With some rods would this make a lot more power?

[@JDATWAY]

yea can run more boost its mainly the rods on Dseries that are bad but if your gonna do rods might as well do pistons

[@Mc-nn4jz]

Cause I got a d15b8 and I kinda want to do something similar but a lot nicer

[@JDATWAY]

@@Mc-nn4jz yea the rods would be the first think to give if you do more than 10psi just do a vitara combo or some different rods and pistons but your gonna need to notch the block

[@JDATWAY]

@@Mc-nn4jz to fit the longer rods

[@yayin87films34]

Yooo Trevor, you make my day with your loudest burp ever i’m telling you you gonna become famous. I love your videos guys. Keep up the great work with the Contant of Hondas..

[@xanny7373]

call the part stores before you go!! Ask them if it’s in stock and then ask them to verify that they have it saved me so much time

[@TunedbyTony]

Autozone should always have BKR7E plugs in stock. They hold huge stocks of NGKs usually

[@matthewglaze5398]

With the Huntertuned 1000cc injectors running on Neptune RTP and a demon 2 my CRX would not run for shit. Tuned a chip with HTS slapped it in ran great. Bought a p72 with an s300 V2 car runs Great after some trial and error with the basement. And fixing my shitty injector wiring.

[@leonellbetancourt3058]

I have hatch with the same engine and i dont wanna k swap it cause i got another one that ima k swap but i just wanna experiment with the d15b7 and with this vid i think is worth it with a good proper set up

[@andrewkriegh7183]

I wish I had someone near me outside Philadelphia, Been trying to tune my own car and or looking for people that can chip tune for me or do a remote tune. I also have been noticing on my 6th gen Accord coupe that HTS tunes, dont work as well as CROME did for my first base map

[@ethanleblanc2049]

I've been watching your videos for awhile, paired with a lot of other honda youtubers it has made me want to learn to tune a little bit. You've always provided lots of helpful tips and how-tos. I went looking in my tune from when it was dyno'd and i'm impressed it's stayed together 😂 On the limiter where it lives, the guy has 24.5deg of timing at 12psi on pump gas. Stock b16 engine hahah. Gonna need to fix that up. Thanks for your contributions to youtube and the community! Even when it gets overwhelming it doesn't go unnoticed.

[@BoostedNW]

I thought you had an ostrich2, are you not using that and a datalogger when tuning these chipped cars? do you have a Moates Hulog? We have a replacement for Moates Hardware, External install emulator (for temp installs for tuning) in development, and we currently have a hulog replacement (boostednw H-Log USB Datalogger) as well as Bluetooth datalogging

[@martinl9025]

You look like a really cool guy. I like your videos. The only thing I question is why didn't fixed the oil return line instead of letting their car smoke But I understand you're trying to help the guy out that's very kind of you

[@anotherdedchannel]

You only do what the customer wants you to do. You're providing a service. It would be like serving a table ribs they didn't ask for and billing them for it. Just not how you do business as a shop.

[@callmetree19]

“Yea, just needs a tune”

[@khalid95eG]

What the he'll kind of turbo oil drain is that that thing is working against gravity got more twists and hills than a roller coaster

[@timscheuermann2554]

your very nice to work on this rolling fuel leak. I would of sent it back to sender

[@harmannwoottun5988]

Good job explaining some issues encountered but ending nicely with solid soch power. Nice video. Do you think 310cc injectors would be enough 8psi on that engine?

[@Esi_Coupe]

Holyyyy shit what a pipe of shit lmaooo. I’m sorry but I would never drop my car off like this💀💀

[@roadjokers6467]

Can I use a base map about to boost my b18 b stock just gona toss like 10 pounds at it

[@CypronieNelson]

Do companies build h beam rods for the b7 engine

[@aragrox]

If I do a standalone, possible to have two maps one for performance on 93/e85 then one eco on 87?

[@BunnyBUNGALO]

This needs way more views. Good stuff, man!

[@alxshyguy2]

hey hunter tune do you tune Mitsubishi 2.4l engines and there computers bro

[@briandecker3669]

Always great content! What's your opinion on removing b16a2 oil suirters with aftermarket wiseco pistons? I have one nozzle broken and can't find one anywhere so picked up golden eagle set of plugs.

[@PhantomShane914]

If it wasn't broken keep them, no real reason to remove them. But you're not going to hurt anything removing them either. You'll lose a bit of piston cooling but also gain a bit of oil pressure.

[@boxer951]

That's gotta be smokeys (from friday)new car that he got cux it did not wanna turn off after hunter shut it down lol smh

[@paistuproductions5519]

Holy crap that’s a ghetto hook up! Wires everywhere!

[@JustinGibbons-d2v]

Why wouldn't they heat shrink the injector wires 😩

[@JoNDOe-x9r]

would you want to restore a B13 Ser

[@repsurfer]

Hunter you are a very patient and competent professional. Because Gawd Damn this build is a shitshow. Good on you my dude

[@jasonhuber3236]

Love these videos the most. I'm still trying to figure out retarding 1 degree per pound of boost. I need this explained to me in layman's terms. So, if running 10 lbs of boost, once boost comes in on ignition map, one would start at 10 degrees and reduce 1 degree per lb of boost as boost increases?

[@mitchweber7868]

In crome, I'm almost sure there's a little bar that does it for you, you just put "retard x degrees per 1 psi boost.

[@knowbull5hit590]

You start at whatever timing it wanted before boost and as it comes into boost start pulling 1 degree for every pound of boost. And if it feels laggy/not as much low end power as it should have you can wait for a few pounds of boost before pulling timing just to get a bit more response/ get it to sing faster

[@BulliKid]

Wow nice results!!!

[@kushmartin1880]

love the new shop tree in background is AMAZING KEEP UP THE HONDA VODS

[@shuree1976]

Minnesota or Wisconsin?

[@charliesnodgrass6788]

Can you recommend a good chip burner?

[@marcushernandez6174]

moates burn 2

[@MaadDawg]

@@marcushernandez6174 bmburner cheaper than the burn2 and active support

[@twin2civicgaraget2cg75]

Well done! I agree "nobody would have touch that"! lol

[@jmillzthepimp27]

My goal is to have you tune my 00 civic d16y8 Vitara build I'm going to do my best to make it a strap and tune lol

[@4077661466jp]

Odd, most d16's even vtec variants don't make this kind of power on 10psi, it must be pushing min 13psi or more to be making that much hp, and if stock rods won't be making it very long, very impressive none the less

[@DkpProductions]

Nightmare. Have any recommendations for machine shops for D series in the MN & WI area?

[@jsimmons3090]

Awesome video!! Keep pushing!!

[@johnhill484]

Thanks for the videos love watching your channel

[@jasonmeyer3206]

looking good with the shorter beard and things. keep the content coming

[@boxer951]

Damn! Thise injectors looked like they got installed by Ezal from the movie friday lol

[@tonykartracer8032]

Didn't know these tired ol' 1.5 motors can still pump out this much horsepower...... out of an eBay turbo no less.

[@NorCalDA9]

You ever mess with the DOHC D16?

[@lsxtmt4910]

How does all this junk end up with you?

[@LeapFrog_Radio]

He is humble enough to work on them first, many tuners would send cars like this away.

[@lamydora457]

Hes humble about budget builds and ebay parts i got my turbo civic tuned by him no problems at all when i dropped it off tuning whent super smooth got the car back in a couple days drove 3 hours to get tuned because alot of tuners near me will try to sell you on name brand parts or wont work on cars with no name parts on it.

[@seroqu1537]

A SCOSH OF FUEL⛽️ DONTCHA KNOW!!!

[@P51]

you worked miracles on that garbage

[@arcadeattic]

U need to send a sticker with your injectors etc ,so we can represent u 😎

[@anthonyespinoza5340]

240 for a pos sohc. your a beaster hunter

[@Jesse-0008]

awesome, thanks guys

[@juniorsacosparalixos]

👑H⏱NDA CIVIC HATCH EG👑

[@papi_sazon2032]

Autolites ?

[@jasonm1722]

great job guys

[@Wreckedekcoupe]

D15 torque baby! 😊😂

[@Mr.Wongburger]

2:50 WTF. :O 3:53 WTF :O 5:18 WTF :O 19:55 FFS :O.... Maybe the AFR sensor is reading correctly? There is a lot of smoke in the exhaust from the oil.

[@TheBongoman47]

Oh man i was laffin. All those elementary mistakes with the wastegate, fuel pressure regulator etc. The person who assembled this needs to stop working on cars.

[@minineji7050]

everyone's gotta start somewhere

[@DAV4WSR1]

hi , he will bend his original connecting rods with just as much!

[@OVTEC91]

Man that’s a classic Honda shit box. Once I saw the injector wiring I knew this was gonna be interesting.

[@gabrielcruz110]

What were they really expecting to get done on that car.

[@PhantomShane914]

Probably exactly what happened in the video.

[@dardenvern]

sir I have tried to reach out to you via email on your website regarding turboing a B20 in a 5sp crv. I also tried calling the contact number on the site. Is there different contact info? Vernon

[@brokenboosted1515]

Hey man unless you're in town I wouldn't bother. If he sells a consult again maybe but he's so busy there's no way. Great guy great parts just swamped

[@dardenvern]

@@brokenboosted1515 cool

[@perrikdesrocers4507]

Hahaha 😂 did you see how much of a gap on his old spark plug 😅😅😅😅😅

[@JustinGibbons-d2v]

Omg autolite plugs are meant for mowers 😂

[@fabianmares4086]

Asking for a fire damn..

[@casperwolters20]

Jesus what a junkyard car. And the wiring :,)

[@PeterChan-z3v]

Jdm volk rim 15in

[@Taurus_firearms_guns]

It smoked every time on a pull

[@stylepoint1200]

JFC.... The janky shit people do to these cars and then drive around on the street. 🤦🏻‍♂️🤡😂

[@joemaggio6806]

Diaphragm was probably smoked on the fuel regulator

[@ernestopiris-grau1383]

I have a similar set up and those numbers is what I really need. I’m good with that !!

[@timothymorgan8254]

Why are most hondas put together like this?

[@TavG]

Stock block d15

[@robertwcote]

Isn't it so satisfying to fix something that's broke??

[@johnb382s]

What a shit box lol 😂 no wonder it came in the shop like that the owner literally has no clue what they are doing 😂 good thing you do.

[@FilthyHeathenKustoms]

What in the backwoods of Kentucky kind of hack job of injector wiring is going on 🤣 man those cheap fuel pressure regulators are a joke

[@kriskan8019]

You’re better of with stock regulator

[@cedriccope178]

suprised you took that car in most tuners wouldve been like na fix everything before bringing it in.

[@trevermiller5807]

Don't even bring that shit out ever. Stop wasting/paying for other peoples time/effort with that D15B7 of all things to build

[@kevinjohnson1958]

208th from the UK.

[@trevermiller5807]

Why do some people actually try and run/tune/drive a D15 anything? Never understood that. The heart of the build should be something of anything. Just why?????

[@ClumsyCars]

bro if i dropped my car off to a shop to have my ecu chipped and they called me the next day telling me to find a ecu i swear to god im coming to pick up my car

[@stevenpoynter4950]

You probably shouldnt drop off half dead rigged shitboxes for the tuner to fix first then there Pueblo Bandito.

[@ClumsyCars]

@@stevenpoynter4950 You didn't watch the video... Jack Arse.

[@rosegold-beats]

People really drop cars that dont even run for a tune

[@TruthBeToldGamer]

Mannnn the fuel injector harness is insane lmao throw it out

[@JP-gd1ln]

Man what's with you guys tripping over doing a b-series talking so much shit acting like your having to build a mk3 VW 2.0 ABA or some shitza. Y'all need to respect the B; of all 4 cyl & especially directly compared to K series; fastest FWD 1/4 mile = B series,fastest AWD/stick shift 1/4 & mile = b-series, highest top speed = B series i could go on & on but most importantly VTEC for the masses arrived with the B and it paved the way for hot rodding Hondas

[@markuscherry1189]

That l scooter was a little zipper man

[@illstartAfire]

I’m sorry to say this but I know it’s money coming into the shop , but damn it man sometimes you gotta say no ,

[@TruthBeToldGamer]

Mannnnn they don’t believe in electrical tape either at least 😢