D.I.Y COOL CAR GADGET obd2 + gps H.U.D heads up display fitted to mercedes w204 or any car

[@Samppaze]

Does it turn on when turning keys. Or does it need to be pressed on the side every time

[@MIKEYZVLOGZ]

turns on with key..take a sec but turns on by itself with acc mode

[@Samppaze]

Mine seems to turn on when cranking the emgine. Alltought i did buy my own from aliexpress. And i have a PreFL W204 250CDI. The gadget looks the same tho.

[@MIKEYZVLOGZ]

@@Samppaze mine turns on as soon as I get to 2nd turn before cranking ... it takes a bit though like 20 30 secs

[@Samppaze]

@@MIKEYZVLOGZ yup seems to be working the same way for me too. turbo gauge caps at 1.5 bar. (2.5 if atmos is calculated). i believe carly red 2 bar (3bar if atmos pressure included) i need to sort this problem and find a solution from settings. otherwise this gauge is really usefull. glad that you made a video of it. would have never tought of looking for one of these.

[@MIKEYZVLOGZ]

@@Samppaze im glad you think so, yeah for a turbo car it would be great

[@MIKEYZVLOGZ]

WHERE I SAID DIRECTION WHERE I SHOWED THE FUNCTIONS AROUND 9:50 I MEANT DIRECT INJECTION , I WAS SCROLLING VERY QUICKLY SO MY APOLOGIES THERE ... IT IS DIRECT INJECTION NOT DIRECTION ... BUT IM SURE YOU ALL GOT THAT REGARDLESS, NOT A BIG DEAL BUT I WANTED TO CORRECT MYSELF SO U KNOW IM NOT JUST TALKING CRAP ..HONEST MISTAKE AND I CAN ADMIT WHEN IM WRONG OTHER THEN THAT LET ME KNOW WHAT U THINK REGARDLESS LOVE TO HEAR THE FEEDBACK

[@moonmc1047]

Keep w204 coming !! Big fan bro!!

[@MIKEYZVLOGZ]

wi definitely do that mate 100%

[@Anil-bg5se]

Thanks for the video Mike! Exactly the content I was looking for.

[@MIKEYZVLOGZ]

u r welcome my friend glad u enjoyed it my friend

[@monchpenz9519]

Working on Mitsubishi Mirage G4/Attrage 2016. nice review and very much detailed, Been using this for 2 years. Cheers!

[@MIKEYZVLOGZ]

awesome

[@stefanlangheden]

Thanks for the video 🙂

[@MIKEYZVLOGZ]

most welcome my friend

[@AlGolzari]

Mikey, I say this with love (you should know by now)…it’s an interesting little gadget but I think the main issue is that this is simply a heads-up display for an OBD scanner. I sometimes plug in my scanner and leave it on my lap while driving - just for diagnostics. There was one point in the video - somewhere around 9-10 minutes where you were reading way too fast. You said “direction” when it was about Direct Injection :). My point is that if you don’t know how to read these measurements, then it’s just arbitrary…you kind of revealed that by going too fast and taking some important measurements for granted :). I use my $20 plug in scanner for real time data on my lap every now and again. And I research what certain settings are in the normal range for my C300 and then check against it. I wouldn’t treat this product as a permanent heads-up display. As you said, some things you checked match up with the dash and that’s all you need - temporary check. I feel as though if a driver is trying to read redundant information that your car was designed to show you in the dash, you can honestly crash and kill yourself bu trying to read a tiny, arbitrary, redundant screen. So I’m sorry, but I don’t think this is a good product at all. It’s an irresponsible product that offers heads-up display when there shouldn’t be full-time, heads-up display.

[@MIKEYZVLOGZ]

I can respect that ... very detailed feedback .. I can appreciate that mate... however plugging in an obd2 scanner is basically the same as using one of these ... my point is your able to view this info in a device like this ..not necessarily while you drive .. ofcourse u should pull over first ..not look at it while you drive ... these are primarily designed to just show speed ... just because something is designed doesn't mean it should be used irresponsibly..its still up to do the right thing

[@Anil-bg5se]

I tried this on a 1999 Porsche Boxster and it works. Although it is only supposed to work on 2004 and above vehicles.

[@radomiriz]

Great video. Thanks.

[@Anil-bg5se]

Hi Mike, in the display with 6 data stream, how do you change the top 4. The one I got has time and other useless info listed on those 4 and I can't figure out how to change those. It only allows me to change the last 2 data on the bottom. Thanks again for the video!

[@MIKEYZVLOGZ]

all displays can be changed u need to hold the menu button til it flashes then press up and down til it goes to the display u want to change and press select it will change

[@Anil-bg5se]

Thanks mate!

[@genpit6492]

Hey mate nice video, I assume you're from Australia is there anyway to flip the screen as I want to mount it on the a pillar on a rhd vehicle cheers

[@MIKEYZVLOGZ]

yep sure can it can flip all ways, and yes australia

[@genpit6492]

@@MIKEYZVLOGZ cheers mate you a real one

[@MIKEYZVLOGZ]

@@genpit6492 cheers bud,much appreciated

[@johnnyquintana2367]

Can you add more fuel to the AFR ratio in the settings? In the “Fuel Adjust” menu? want to get my A/F.R in a more optimal value, currently running a little lean.

[@MIKEYZVLOGZ]

unfortunately it's only a monitoring system not able to modify those settings

[@NathsWorldYT]

Hello I have this display, is there anyway to get an (average) fuel consumption instead of an (instant) I’d like to see what I averaged? Great video. Many thanks

[@MIKEYZVLOGZ]

I'm sure there is an average usage ...flick through the menu

[@keenankerr5150]

well done

[@ITRY381]

Great content keep them coming also struggling to put new LEDS in for the parking lights any tips for quick fitting.

[@MIKEYZVLOGZ]

use a set of needles nose pliers .. wenever I have trouble with then I use a endoscope for my phone so I can see what I'm looking at .. they are real cheap like 15aud... after a while sometimes due to dust and dirt it gets stuck but usually u can pull it out from the wires ... if not use pliers to help grip the socket of the leds not the wires !!

[@ITRY381]

@@MIKEYZVLOGZ Thank you!!!!

[@MIKEYZVLOGZ]

did u check out the video where I show how to change all bulbs

[@ITRY381]

@@MIKEYZVLOGZ yeah i have seen that one managed to get it sorted thank you mate.

[@MBZXZ]

i watched your previous video, and you mentioned the light bulb constantly go bad , i think i found the reason, i used the led 194 and it lights up even with the vehicle off, but when i try on the original regular light bulb it doesn’t light up , so i think all the light has constantly power to it

[@MIKEYZVLOGZ]

which light bb do u mean for which video ?

[@MBZXZ]

@@MIKEYZVLOGZ the video for w204 the light bulb will go bad very soon, i tested on both side marker light and both 4 top parking light bulb, they will light up even i lock the car for hours, i test with 194 LED , and also the amber light bulb

[@MIKEYZVLOGZ]

@@MBZXZ oh I understand

[@MBZXZ]

@@MIKEYZVLOGZ recently i replaced the secondary air pump because it failed and throws CEL , and my registration is due, but i cannot get the SAS( secondary air system) to get smog ready

[@bradleybritton7652]

Does the unit automatically turn on each time you start the car? I noticed there was a power switch. If it does automatically turn on, does it turn on to the last displayed screen?

[@MIKEYZVLOGZ]

yes turens on automatically and goes right to the display you choose

[@bradleybritton7652]

@@MIKEYZVLOGZ Thanks for the information. The actual screen that I would like to use on each start up is the “Data stream”. Just to double check, will the unit also turn on and display the data stream first if it was left on the data stream screen during shutdown? Thanks for your help, I couldn’t find this information anywhere.

[@MIKEYZVLOGZ]

@@bradleybritton7652 I'll check and let u know if not it's a simple few clicks

[@bradleybritton7652]

@@MIKEYZVLOGZ Thanks

[@MIKEYZVLOGZ]

@@bradleybritton7652 it stays on the screen u leave it on ... or at least the section ...so yes

[@jordywh7395]

Question. Is there any warning alarms for very high water temperature?

[@MIKEYZVLOGZ]

yes there is an alarm setting for battery voltage, speed set alarm , rpm alarm set , and coolant temp alarm , so yes there is the setting to set an alarm for when u want it to sound according to your setting

[@tmbrown2409]

Hey Mikey do you still live in Melbourne ? Do you have the w204 still ? I run the w204 Melbourne club would love to connect

[@MIKEYZVLOGZ]

yes mate I do... I live in sth eastern... u can contact me via fb under same name.. of course I still have my w204 .. lol.. I love this car .. be hard to sell

[@tmbrown2409]

@@MIKEYZVLOGZ messaged on fb mate

[@FairladyS130]

Need info on how to adjust various features such as speed alert rather than a big sales job.

[@MIKEYZVLOGZ]

did u check the manual ? it has basic instructions on it ..but I guess abut of playing around is needed cuz the manual is never clear enough ... what u wana do ? adjust speed alert?

[@FairladyS130]

@@MIKEYZVLOGZ Yeh, found one titled HUD OBD2 GPS that showed how to do that. Audio alerts setting would be handy too.

[@ailhamtiara]

Hi Mikey, would you consider an Apple Carplay mod? Would love to see you doing it!

[@MIKEYZVLOGZ]

I actually don't have an iPhone hence why I did the phonemirrorlink videocuz I use android

[@ailhamtiara]

@@MIKEYZVLOGZ ahh i see, fair enough hahah. would you not consider android auto?

[@MIKEYZVLOGZ]

@@ailhamtiara yes been thinking out it but honestly it's like using ur phone

[@lord4291]

does it warn you if the temperature of the car increased ?

[@MIKEYZVLOGZ]

hi mate yes .. ur able to set a warning on certain temps for example I've set mine to 100 deg cels and it give u a sound wen u reach that temp.. ur able to set it

[@afrodan3049]

What is the size of the screen? All I can find is the dimensions including the housing. Thanks

[@MIKEYZVLOGZ]

it's small like 1..5 inch

[@JamesMartinDBanes]

Hello brother. Only time and voltmeter are working.. what should i do? Thanks

[@MIKEYZVLOGZ]

try test on anoither car , or maybe the item is defective, it shoudl just work not special setup , just plug and play

[@moodyzain]

Hello brother, I've seen ur videos and I'm planning to do what u r doing, u r awesome bro 😍🔥 Today I had "ABS and ESP inoperative" message 💔 I searched and it might be the "Speed sensor" or "ABS module" The thing is when I searched for online genuine parts, most of them had only C300 and mine is C180 Kompressor. Is there any differences in spare parts? 💔 Thanks in advance and keep up the great videos 💕

[@MIKEYZVLOGZ]

hey mate in this case I think the part maybe the same..not specific to your model ... but u just need to double check ... try ask mercedes about the part first then once u have the part no. search for it yourself online ... I know things like brake sensor and speed sensor use the same ... but as always you double check first

[@MIKEYZVLOGZ]

thanks for saying so ur too kind

[@laieakana8360]

How do you change it to psi instead of kPA?

[@MIKEYZVLOGZ]

use the mode button and yp and down

[@sleek5tc]

Can it show fahrenheit for the coolant temperature?

[@MIKEYZVLOGZ]

i beleive so ill have to check usually u just change the reading from cel to fah

[@m5029]

Is it mach to nissan nv200, 1.5 dci, 2012?

[@MIKEYZVLOGZ]

@@m5029 should be fine be ause newer model

[@m5029]

@MIKEYZVLOGZ newer model?

[@MIKEYZVLOGZ]

@m5029 sorry I just meant if it's later then 2005 it will work fine

[@Cescwa]

Its compatible for toyota diesel car 2018?

[@MIKEYZVLOGZ]

yes i dont see why not

[@pilotpr0jekt883]

Can it Show the Oiltemp?

[@MIKEYZVLOGZ]

@@pilotpr0jekt883 not sure I'll.have to check

[@pilotpr0jekt883]

@@MIKEYZVLOGZ Thanks man, because oiltemp is the main-reason for me to buy it

[@MIKEYZVLOGZ]

@pilotpr0jekt883 u should get amg function on ur cluster will show oil

[@pilotpr0jekt883]

@MIKEYZVLOGZ i dont drive a merc, i have an audi, but i am looking forward for a display like this that can Show oiltemp aswell

[@MIKEYZVLOGZ]

@pilotpr0jekt883 ahh i see ..let me.check for u

[@drinkablesafe997]

How much did it cost you usd

[@MIKEYZVLOGZ]

only about 40aud shipped which is about 30usd I think not sure

[@MIKEYZVLOGZ]

ITS ABOUT 43USD SHIPPED TO YOUR DOOR NO MATTER WHERE U ARE IN THE WORLD