Copper Flare With The Navac NEF6LM Battery Powered Flaring Tool

Creating a quality copper flare is extremely important. The Navac NEF6LM battery powered flaring tool is a complete solution for creating copper flares. The battery powered tool, comes complete with battery and charger and several flare blocks ranging from 1/4" to 3/4" in size. The NEF6LM flaring tool weighs only 2.9lbs and can complete over 100 flares per charge. The tool dimensions are 10" x 4" x 4". The Navac NEF6LM is capable of making 45 degree flares for 410a and includes a flare gauge tool to check the quality of each flare. The NEF6LM is available at www.trutechtools.com/ with an additional 8% off using code knowitall at check out.
Save 8% on your purchase www.trutechtools.com/ with promo code knowitall
Visit HVAC Know It All on social media Facebook
/ hvacknowitall
Instagram
/ hvacknowitall
LinkedIn / gary-mccr. .
Listen to the HVAC Know It All Podcast anchor.fm/hvacknowitall
Visit www.hvacknowitall.com/ for articles, and tips
#navac #flaringtool #hvactools

[@HVACKnowItAll]

Fantastic innovation on this tool!

[@Rodzilla408]

And is there a differences between the two?

[@davidcarpenter9234]

You forgot to put the flare nut on first, ROOKIE!

[@HVACKnowItAll]

😆

[@TruTechTools]

Great video! Good on NAVAC for simplifying the process.

[@HVACKnowItAll]

Thank you and 100%

[@proanswers]

Surprised Navac hasnt competed with braze-less tool market against Parkers Zoom lock tool. Although crimping and flaring are two different mechanical motions.

[@swanjaymusic]

Wow that is a kool tool..

[@HVACKnowItAll]

Yah it's nice!

[@markcluff7104]

Awesome. Ty

[@HVACKnowItAll]

You're welcome

[@yorkrojas1452]

Master!!

[@afbigfish1]

so 3 years later are you still happy with this tool? I know a lot depends on prep square cut and good deburing but do you get good leak free flares consistently using this tool? The flare looked real nice but there was some focus issue on the close up. Do you add a drop of lube on the cone?

[@Rodzilla408]

How do you like this flare tool compared to the 1st tool they came out with?

[@HVACKnowItAll]

It's awesome

[@fredmiller694]

Did you move the pipe stop before putting the tool on?

[@HVACKnowItAll]

No the machine move it out of the way.

[@abdulrehmanakram.3030]

we need HVAC field more than 45 degree flaring angel. possible we can get more angel with this tool?

[@HVACKnowItAll]

Why more than 45⁰? 45⁰ will fit inside a flare gauge.

[@abdulrehmanakram.3030]

@@HVACKnowItAll sir u are experienced technican and u know very well that sometimes we need more than 45 degree for sure no any leakage from the flaring side

[@paulcepeda968]

Will this tool make a 37 degree flare?

[@HVACKnowItAll]

It has a flare size adjustment, you'll need to tweak it until the size you need is reached.

[@jrsmyth9761]

Show this on an actual job site doing the work on the pipe you are installing.

[@HVACKnowItAll]

Dine so many times on Instagram and Facebook

[@walknpace]

@HVACKnowItAll Will it flare stainless steel tube,?

[@abdulrehmanakram.3030]

very expensive tool kit

[@o2slo338]

Yes but there is no go backs because of leaks