We will test the strength of 5 ton jacks with a 500 ton hydraulic press. Which jack can withstand a heavy load modern or old
Пікірлер: 3 000
@autistica12 жыл бұрын
Anyone else feel really depressed watching that sturdy and faithful old jack get destroyed?
@richardscaggs59362 жыл бұрын
The Old Played On Words Trick‼️ Right?
@OFFICAL-FULL-SENDER2 жыл бұрын
I know i do because i need one mr bean
@peter-coates2 жыл бұрын
The word depressed has lost meaning
@robertboudrie22342 жыл бұрын
@@peter-coates The jack was indeed de-pressed
@OFFICAL-FULL-SENDER2 жыл бұрын
Ahh know i get the joke
@crazypete37592 жыл бұрын
I feel like the 1970 jack should have been declared a winner after surviving 20 tonnes and been spared from destruction...
@Snakecggg2 жыл бұрын
100% agreed
@c2sartinkprinthub7572 жыл бұрын
yes.. yes.. yess.
@extrm1612 жыл бұрын
before hydraulic kzbin.info/www/bejne/hoXGYoyIpthkbJI
@Mcbone_Inc.2 жыл бұрын
i thought in that destination for him.. Rest in peace Mr. Jack
@crazypete37592 жыл бұрын
@@bifftannen3167 Anything that I use from harbor freight I derate by a minimum of half! 3 ton jack or jack stand = 1.5 ton!
@radicalracing092 жыл бұрын
I hated seeing that old jack get destroyed it still had a long life ahead of it until now☹️
@gulpbiys57052 жыл бұрын
No yet kzbin.info/www/bejne/rZC8koiHf6aEibc .,
@jordons79632 жыл бұрын
“Do not try this at home”. Yes let me casually get the 500ton hydraulic press that I have and do this test for myself.
@jordons79632 жыл бұрын
@@lukemallory7832 my comment was playing off the ‘don’t try this at home’. As like anyone has them laying around.
@joe95182 жыл бұрын
@@lukemallory7832 nah, it was funny he just didn't get it.
@flyingisland75832 жыл бұрын
@@jordons7963 Obviously the « Don’t try this at home » advertising was already a joke
@Bob134542 жыл бұрын
@@lukemallory7832 Text is not the ideal medium for subtle sarcasm.
@djtaylorutube2 жыл бұрын
I'll bring round my scanning electron microscope so that we can have a closer look at it all afterwards.
@KeyToTime2 жыл бұрын
Old tools tend to be stronger because of the lack of computer aided design in the past. Nowadays, you can design something with just precisely the amount material needed to get the job done, no more, no less. Older stuff tends to have a hefty safety margin to account for any possible error in calculations.
@Jamesmor9992 жыл бұрын
there's also that companies make stuff to only work until the warranty is over, they noticed that people doesn't buy stuff if they never break
@KeyToTime2 жыл бұрын
@@Jamesmor999 That has always happened and not at all new. Designers have just gotten a lot better at it with the aid of CAD.
@assordante22052 жыл бұрын
You can't really argue for older companies and products when they also made lead paint and asbestos.
@dorego36582 жыл бұрын
Basically a higher tolerance
@maiphonevilai30992 жыл бұрын
ດີໆໆໆ
@G1ZQCArtwork2 жыл бұрын
I would have refurbished the 1970 Jack with new seals and fresh oil, and sand blasted the casing ready for a respray. It would have lasted another 50 years.
@Lobatschewsky2 жыл бұрын
That kind if craftsmanship is just about gone. Harbor Freight has one with Bluetooth and LED’s. They say you can trust it with your mother in law…
@Jvncv__2 жыл бұрын
Did i ask?
@Lobatschewsky2 жыл бұрын
@@Jvncv__ Is she small enough to ride in the cab with you?
@mattyal93472 жыл бұрын
Yeah but where do you get the seals?
@G1ZQCArtwork2 жыл бұрын
@@mattyal9347 If you have the original pattern, any Hydraulics specialist can make a new replacement, as a custom job.
@ljason37562 жыл бұрын
i felt like a part of me died when he destroyed the 1970's jack, then i read the comments, and found that i was not alone. Thanks
@thesonofhercules29722 жыл бұрын
the old ones are beasts, i have one really similar to yours and a bigger one, both work for really well and for several years already. No matter what u pick up with it, it just doesnt break
@jakek67282 жыл бұрын
Sad to see that old Jack destroyed. Thing probably would have lasted another 50 years
@Raven7777777777777772 жыл бұрын
Exactly, compared to new one that would probably be lucky to last 10 years.
@ianrobertson34192 жыл бұрын
For what purpose? You shouldn't be using old jacking and lifting equipment.
@Raven7777777777777772 жыл бұрын
@@ianrobertson3419 In lot of cases, old equipment is more realiable than new one unless it ends up under hydraulic press. Back in the day things were build to last, these days things are build to crack after warranty voids. In some cases new stuff dont even last that long so in my case, i would rather put my trust into old equipment then new one. But this is just my opinion based on experience.
@chimei-tekinaneko83182 жыл бұрын
@@ianrobertson3419 that old jack was pure gold and would have done a great job for many more centuries.. the modern pieces of shit shouldnt be used after a while, cuz they break way too fast.. Back then stuff was build to last, nowadays its quantity over quality.. Also back in the day when the good stuff was still arround, the "it shouldnt be used after x/y years" was propaganda to make people throw away tools that would have outlived like 10 new ones..
@jakek67282 жыл бұрын
@@ianrobertson3419 because it works too well and is too strong right?
@ErikS-2 жыл бұрын
As a mechanical engineer, I can point to the fact that the difference in weight of the device itself is a good indicator of the load bearing capacity. What you also see is that the chinese one is made mainly of sheet metal (i.e. cheap), versus casted parts for the 1970 one. This shows also that the 1970 one is way more costly to produce. When you would calculate the cost for producing - in a large series - such a casted jack in 2021, you would for sure be way more expensive than the sheet metal one. What I am saying here is that the 15 usd that you paid for the 1970 jack is a very good deal.
@Body_Model2 жыл бұрын
Did you notice the 1970 jack when it was being compressed the side split in half at 9:00, is it because that's where it was welded..
@ProPatriaRO2 жыл бұрын
@@Body_Model welds are often stronger than the surrounding material. And the split is far too clean for it to follow a weld. No, i would be that it was cut from a long piece seamless pipe. It would be the logical choice of construction, cheap and reliable.
@damienhartley32222 жыл бұрын
@Erik S. Jack's are not that expensive.
@Body_Model2 жыл бұрын
@@ProPatriaRO I was told by a mechanic that rust always develops where it's welded.
@ProPatriaRO2 жыл бұрын
@@Body_Model if the surface is prepared correctly for painting, rust should be a nonissue, that being said, a lot of companies or employees skimp on this part, thats why it always rusts on the weld.
@koomky2 жыл бұрын
Always excellent ideas ! Why not doing this with different kinds of wood, I'm curious to see the resistances ! Thanks
@joelikespie31472 жыл бұрын
I love how hydraulic press videos always say "don't try at home" at the begging as if the average person just has a 500 ton hydraulic press at their house.
@paulsmith53982 жыл бұрын
I agree! And then it would be a bear to drag up my sloped driveway which is deteriorating from shoddy concrete and years of frost heave. I wouldnt have room for something that big anyway. That guy must think we are all rich like him. What gets me, is that im old school and dont know whiddly about all that metric garbage. Keep that metric stuff overseas where it belongs!
@BBQDad4632 жыл бұрын
Destroying the old jack was worse than a crime---it was a mistake.☹
@bogdankusmierczyk83762 жыл бұрын
100% true
@bdgackle2 жыл бұрын
5 million people saw this video and now know the old jack is better than the new. This one jack gave it's life but probably saved dozens of others from the landfill in the process.
@mariopastranaoconnor50702 жыл бұрын
crime is worse than a mistake
@GetDougDimmadomed2 жыл бұрын
@@bdgackle People flooding to junkyards to get the bottle jacks from old trucks.
@user-qz3um5rw4g2 жыл бұрын
Hi Napoleon
@topandrun1262 жыл бұрын
It was a little hard to see the 1970 jack get destroyed. That jack is older than me and much more stronger.
@bobtheblob97392 жыл бұрын
You can't carry a 20 ton load?
@topandrun1262 жыл бұрын
@@bobtheblob9739 only if you can carry 10 I will carry the other 10😅
@Humbulla932 жыл бұрын
@@topandrun126 do you even lift bro?
@extrm1612 жыл бұрын
hydraulic after kzbin.info/www/bejne/hoXGYoyIpthkbJI
@runnininthe80s842 жыл бұрын
Imagine all the cars it lifted and was relied upon people over the years only to be abused and destroyed for views on KZbin
@visualartsbyjr24642 жыл бұрын
Although it would have been more expensive, it would have been interesting to see how a good quality modern jack, of the same type, would have faired instead of a cheapo.
@RyokoChanGamer2 жыл бұрын
R.I.P. Old 1970 Jack... you served well 😢😢😢
@ditmarvanbelle10612 жыл бұрын
Yeah. It could even have destroyed the Chinese one. Sad to see 'er go.
@herbiee222 жыл бұрын
I always stop at antique shops and fish out old tools. I love the fact they would have been used by proper tradesmen and wonder about the work they did and where those guys might be now....those old tools are a piece of history....if only they could talk...
@jeremymcadam74002 жыл бұрын
Plenty of real tradies still around, you probably just don't hire them
@herbiee222 жыл бұрын
@@jeremymcadam7400 Not the old school.....using the tools I'm talking about...
@jeremymcadam74002 жыл бұрын
@@herbiee22 I carve stone by hand for church restorations. Let me tell you, we do a much better job than the convicts that built them
@herbiee222 жыл бұрын
@@jeremymcadam7400 I would like to see...not doubting what you say but to appreciate the work. I thought all decorative stone or cement was cast nowadays....
@jeremymcadam74002 жыл бұрын
@@herbiee22 there is plenty of that, but it's not nearly as good and not a whole lot cheaper. There was 1 other apprentice that did restoration in my year at TAFE 5 years ago, it's definitely a dying art
@WhiteWolf-ui9wg2 жыл бұрын
The old boy has performed like a real hero! Respect. R.I.P. 💪🏼
@roseblite64492 жыл бұрын
That jack was a year younger than me. Good to know that my dad's jack (may he rest in piece) from the 50's or 60's that is still working is at least as strong as that 1070's jack. They used to make things that lasted back then, unlike that cheap jack from China. Bit sad to see that jack destroyed, but good information.
@JeepBoiFL2 жыл бұрын
Like so many others I would have been fine with the 1970 jack getting a reprieve.
@chrisdickinson79492 жыл бұрын
Exactly as I expected ! Quality is appreciated long after the price is forgotten, as vividly demonstrated here
@toolmakerbest15842 жыл бұрын
New sub, and a like! 👍👍 I've been a machinist since 1970, and I do not get rid of my old tools, for this very reason!
@MTd22 жыл бұрын
What books are these? Can you tell me the titles or examples?
@MrMaurotheawesome2 жыл бұрын
@@MTd2 he said "tools" not books
@ninjaxd90502 жыл бұрын
Well back then they thought profit came from making good equipment. These days we know profit is about doing the bare minimum.
@shimxininahi80242 жыл бұрын
Models made in the 70's you can not get rid of that. They jack up every thing and are well built! Must be the steel and the O-ring rubbers.
@tcap79172 жыл бұрын
That old jack deserved a new coat of paint
@SehxualPanda2 жыл бұрын
the old jack giving us the thumbs up as its being slowly destroyed... Hasta La Vista, Baby
@Liquidshrapnel2 жыл бұрын
Watching 1970s jack die felt like watching the terminator descend into the molten steel , rest well you've earned it. In all seriousness it wouldve done even better if it was refurbished .
@dondmon962 жыл бұрын
I was thinking the same thing. Really neat to watch, but kinda a waste.
@flash001USA2 жыл бұрын
Nice one.... Agreed.
@shsz19842 жыл бұрын
Heh. Curious you say that... Isn't the music starting at 8:17 from Terminator as well?
@assordante22052 жыл бұрын
It was a old piece of shit, who cares? Also, refurbish? How? Who's making seals for this thing? Use your brain a little bit.
@flash001USA2 жыл бұрын
@@assordante2205 Believe it or not you can still find seals for the older hydraulic jacks because most of these manufactures are designing close to the same internal specs from the older builds plus it saves them money to not reinvent the wheel redesigning O-rings and other internal seals. I just rebuilt a 40 year old 20 ton jack and I was concerned I wouldn't find replacement parts. Even without a model number all you have to do is measure the piston and even the worn out seals and you're in the house. The guy explained to me that most of the newer jacks were still based on the older designs and using common sized seals that were still being produced...
@Bishopaaronbeachy2 жыл бұрын
Seriously disgusting to destroy the old jack 🤷🏻♂️
@reedkuzel34112 жыл бұрын
no one else was gonna use it, better than letting it just sit there.
@dewrus21532 жыл бұрын
I hated seeing it too...but in the interest of science, it was informative to confirm what people say all the time about the quality of old tools versus new. That old jack was four times the tool as the new jack. If anything, use it as a source of inspiration to save old tools when you come upon them at yard sales, flea markets, etc.
@notquiteordinary2 жыл бұрын
@@dewrus2153 literally wasn't 4x. 2x at most. The numbers are right in front of you.
@ryangoff48132 жыл бұрын
I would have used it
@dewrus21532 жыл бұрын
@@notquiteordinary - Hi Lostcreativity. I thought it was obvious...but perhaps not. When I said it was "four times the tool", I was just throwing out an expression to emphasize that the old one was much better than the new one...not specific statistics or mathematical calculations. If you wanted to pick nits and get specific about numbers, you would first have to determine what attribute you would focus on to do your calculations, right? What really makes something "four times the tool" or "twice the tool" or "half the tool"? When said in general terms, you can't do this which is why I thought it was obvious I was speaking in general terms. But if you need specific numbers to help you sleep at night, I offer these options just for you. You could start with price...which would make the old one 1.666 times the tool since it's less expensive (although we don't know if the cost shown was current cost of a used jack or the original. If original, you'd have to adjust for inflation which would greatly change the outcome!) You could use load rating which would make the old jack just one times the tool since they are rated the same...and therefore would perform their assigned tasked within spec for anyone. You could use the load required to make them fail in which case the old one is 1.53 times the tool since it required 359 more kg to compress the piston back into the sleeve . You could use the load required to crush the jacks into little bits (aka oblivion) in which case the old one would be precisely 1.636 time the tool You could go with the thickness of the casing which would make the old jack about 4 time the tool. You could go the the actual weight which makes the old one 2.033 times the tool. You could go with how long the jacks lasted which means the old one was 50 times the tool. Or, you could consider that after both jacks were pushed past their respective failure points, the new jack was completely inoperable while the old one continued to work just as well as before it was stressed. In that case, the old one would be 1000 times the tool (+ or - a million) because the new one literally ceased to be a tool and became a paper weight while the old one still worked perfectly fine. Kinda hard to pin a number on that factoid. Another variable worth considering is that the old jack had 50 years of wear-and-tear on the cylinder, piston, and seals...likely making it's current performance less than what it was originally. Without knowing how it would have tested in 1970, there would be a potentially huge discrepancy in the specific numbers you so desire. The only real way to determine this at this point is to buy another new one and use it for 50 years and then redo the test to see how the 50 year old "new" jack compares to its "50 year old" test results. My guess it that new jack won't even have an operational life span of 50 years...but that is just a guess from a random internet stranger who carelessly throws out expressions like "four times the tool" on the interwebs and misleads all but the most astute thinkers who are compelled to call him out for his carelessness with such calculations. Any-hoo...that is why I just threw out a figure of speech and wasn't stating a literal number. But if you really wanted a specific number based on all the criteria I mentioned above, I did the math for you (with a real calculator and everything!) and determined the old one is exactly 132.733125 times the new one. Hope you have a nice weekend, my friend!
@darylarmentrout2522 жыл бұрын
The look on their face when you return that new jack to the store 😂
@skydyver33 Жыл бұрын
This channel is addicting and quite informational as to the quality of some newer products.
@flash001USA2 жыл бұрын
The modern jack did meet it's specs under test and it performed like you would expect it to however, I see a lot of videos like this comparing older tools to the newer stuff on today's market and even the worn out tools on average seem to do better than their modern counterparts. That speaks volumes.
@Taylormade23502 жыл бұрын
Because people want lighter tools so they're made of aluminum. We could very easily make tools of steel and make they 4x as heavy but thats not what people want.
@ObiwanNekody2 жыл бұрын
Survivor bias is one of the problems here - older junk tools already passed on. Very few of these videos also normalize for specs or even cost relative to inflation.
@GamerNerdess2 жыл бұрын
@@Taylormade2350 It's not people wanting lighter tools. It's cheaper for the company to use lighter metals and bullshit rubber. Companies don't want to fork out for steal anymore.
@Taylormade23502 жыл бұрын
@@GamerNerdess no its not its people wanting lighter tools its also cheap people who bitch if anything cost more than 10 dollars.
@nealramsey44392 жыл бұрын
It's speaks volumes alright. It says we need to boycott everything from china. We wouldn't buy from Nazis. But the ccp is every bit as bad. But makes it even worse is their products are fucking junk. So we are screwed into buying it because the companies have moved there too make more money. But we wind up paying the nearly same price for products that neither last nor perform as described in broken English.
@baggedlunch92422 жыл бұрын
The old jack is a absolute beast
@user-we2zv5ol1f2 жыл бұрын
Жалко старый советский домкрат в хороших руках ещё лет 50 прослужил бы.
@user-mn8gx1kk1k2 жыл бұрын
искал этот комментарий, домкрат определённо именно СОВЕТСКИЙ, и не один иностранец этого не отметил
@Carshoot_Germany2 жыл бұрын
The Terminator 2 sound in the backround is the best! 😉👍
@rogerbivins91442 жыл бұрын
I was an absolute fan of the testing but then you lost me with the nothing to be gained from - destroying a perfectly serviceable 1970 jack that was ready to serve another 50+ yrs
@Bob134542 жыл бұрын
It's a just a peace of metal, you can very easily buy a replacement. There is literally no reason not to destroy it other than the cost of replacement.
@urukadooedwards76372 жыл бұрын
Except for the fact you don't have a Time Machine to buy another.
@Bob134542 жыл бұрын
@@urukadooedwards7637 Tell me a problem that the creator of this video might reasonably encounter for which having a jack specificity from the 1970s is the only feasible solution.
@RacingPepe2 жыл бұрын
@@Bob13454 Your way of thinking is the exact reason we have so much trash on our planet. It's not about cost, it's about wasting materials.
@Bob134542 жыл бұрын
@@RacingPepe If you're not donating the money you save to charity then keeping the jack isn't helping the world, the money just goes to some other hobby of yours.
@HeuderM2 жыл бұрын
Triste ver o antigo sendo destruído. Era uma peça que provavelmente iria durar muito tempo ainda.
@victorschimit34092 жыл бұрын
Ainda tinha ainda uma eternidade pela frente.
@rubengatolindu2 жыл бұрын
Sim, o antigo também achei desperdício. Muito tempo? Ia durar eternamente. kkkkkkkkkkk
@isao30712 жыл бұрын
Eu também achei deveria guardar o antigo.Se trocasse o óleo e fizesse uma restauração completa ficaria nova,duraria tanto que talvez não estaríamos aqui para ver outra comparação kkkkk.Peças de hoje em dia realmente são todas descartáveis !
@SL-pj8yj2 жыл бұрын
@@isao3071 A
@SL-pj8yj2 жыл бұрын
@@rubengatolindu Cabelo bonito
@Sam-gp9gw2 жыл бұрын
I would like you to test the strength of a Japanese motorcycle engine against a Chinese engine. I liked the comparison of hydraulic jacks, we can clearly see the superior quality of a jack from the 70s compared to now. The channel is great for understanding certain things. Thank you very much
@armand42262 жыл бұрын
Superb and original idea all these tests under a press ... you had to think about it .. well done
@esriesri2 жыл бұрын
The old jack getting destroyed broke my heart a little😢
@Skyper0082 жыл бұрын
Old tools = QUALITY New ones= it's called business
@CyberCrusader272 жыл бұрын
New ones= made in China
@Skyper0082 жыл бұрын
@@CyberCrusader27 absolutely right
@Razor20482 жыл бұрын
Will the warranty cover the damage to the jack after it has experienced 500 tons?
@b.elzebub92522 жыл бұрын
Everyone's talking about the old jack being destroyed, but can we just take a moment to appreciate the 2021 jack performed very well. Going almost 3x over the rated limit before failing. And doing it with half the weight and for only 25 bucks. Honestly not at all what I expected from a cheap modern 'Chinese' jack.
@MrMaxeemum2 жыл бұрын
No.
@DodgerEcho2 жыл бұрын
Старый не надо было разрушать, он был достоин работать дальше или стоять в музее, очень жаль его, хоть и железка.
@Ole4ka.Laaapo4ka2 жыл бұрын
Согласен.
@bob_the_barbarian2 жыл бұрын
This. A refurbishment and new fluid and you would have gotten another 50 years out of that jack. Damned shame you destroyed it.
@amatgimang2 жыл бұрын
единомышленники
@balabius66582 жыл бұрын
Вообще то он украл видео с другого канала.
@bob_the_barbarian2 жыл бұрын
@@balabius6658 Is this not the usual hydraulic press guy?
@billelmaasmi2 жыл бұрын
This is a fact that old products are more powerful and hard on new products 💪
@Mima_the_vengeful_spirit2 жыл бұрын
oldies were made to be durable as they were hard to create, while new crap are deliberately made to break so you buy a new one (and so the compagny gets more money from you. that's capitalism at its base)
@PhysiqueGeek2 жыл бұрын
Eh, yeah and no. It's more so just proof that a $107 ($15-1970) 5 ton jack will outperform a $25 ($3.50-1970) 5 ton bottle jack. Same still holds true today.
@Bobbywolf642 жыл бұрын
@@PhysiqueGeek Very true. Thats what everyone is is missing in these old vs new comparisons. They are compairing an old, quality made item, to a new chinesium piece of junk. There are good quality jacks out there you can still buy new. But people are cheap, and for the most part they do not shell out the required money for something good. It also doesn't help that 90% of items today are cheap junk, and the old cheap junk has long since been thrown away, leaving good quality items to stand the test of time.
@tylerslagel54852 жыл бұрын
Eh no. It’s just that people are cheap. There are jack stands rated for 50 tons for crying out loud. Brand new ones, too. You get what you pay for. Anything more than $100 and you’ll be getting high quality, for the most part.
@PhysiqueGeek2 жыл бұрын
@@tylerslagel5485 right, but my point is that we aren’t comparing cheap to cheap here
@lopez94512 жыл бұрын
It's quite impressive the force of displacement of pressured oil
@remengaming13532 жыл бұрын
Now you know there was a tool named Jack, and this tool saved me in every way the tool can be saved. I don't even have a picture of tool. This exists now only in my memory
@crazyoverlifting5872 жыл бұрын
Don't repeat at home.. As if I got a 500 ton hydrolic press just laying around in my home...
@6rednek2 жыл бұрын
I mean, doesn't everyone?
@klutzspecter34702 жыл бұрын
I pretty sure your home weighs more than 5 thousand pounds. And I'm sure property lines go all the way down to hell. Lots of soil down their.
@jameselroy74722 жыл бұрын
We Americans should be utterly ashamed of outsourcing anything to China, it was our greatest demise.
@briantitchener48292 жыл бұрын
Is this video only for Americans then? There's also a great big world outside of America buying rubbish products from China.
@jameselroy74722 жыл бұрын
@@briantitchener4829 let me rephrase that to the world, but believe it or not at one point American Industry used to build amazing stuff.
@usernamwdrama Жыл бұрын
Awesome and not at all surprised by the results.
@alexmisquez96122 жыл бұрын
I have an older one similar to that and it works like a champ
@derrickrr55162 жыл бұрын
That was a high quality 1970 Jack you just squashed.
@vincentgough12 жыл бұрын
Hard to watch
@tylerslagel54852 жыл бұрын
*inhales enragedly* “Sooo, how can I help you?”
@joseffpenticoff85132 жыл бұрын
That's what I was thinking! One less high quality tool in the world 😦
@tjm39002 жыл бұрын
Was the price of the old jack what it sold for in1970 or the price used at a flea market ? If the former, what would it cost adjusted for inflation? If bought used that price might be somewhat arbitrary and it was likely sold as is. What I am saying is, the modern jack met specs and performed as expected. The old jack was a crap shoot (it may have been abused in the past) Who knows ? Moral is: don't trust a 5 ton jack to lift more than 5 ton.
@Goldarr19002 жыл бұрын
15 bucks in 1970 is worth 107 bucks with inflation adjustment.
@MrBluecollar82 жыл бұрын
I don't trust any jack.I always like to pair up with jack stands for vehicles and blocking for buildings and such.I've seen a lot of hydraulic failures (not just with jacks), and sometimes there is no warning.
@r1learner1782 жыл бұрын
@@MrBluecollar8 You use jack stands because you seem to have a fully functioning brain.
@MrBluecollar82 жыл бұрын
@@r1learner178 I just get a little flinchy after growing up playing with bumper jacks and split rims.lol
@r1learner1782 жыл бұрын
@@MrBluecollar8 Thanks for the flash back, I had forgotten about those things. LOL
@alexraszeja92662 жыл бұрын
I have literally always wanted to see this 😭 Tyvm
@timberlineoffroad2 жыл бұрын
I love finding old bottle jacks at estate sales! So much better than new ones!
@LevelUpLegends882 жыл бұрын
This should be a battle. The one who loses gets destroyed. The one who wins gets to live another Day. That way a lot of old stuff will continue to live on... Old is gold folks
@eduardopereira51862 жыл бұрын
It's amazing how things made in the past were made to last even in extreme conditions.
@Cheepchipsable2 жыл бұрын
For all we know it was used twice and sat in a garage until someone picked it up for these tests. In case you missed it the Chinese jack lasted well over it's rated lifting capacity.
@ianrobertson34192 жыл бұрын
Yes, the old jack was made without any safety devices. The new jack has an overpressure bypass.
@1aatlas2 жыл бұрын
Back then there was no planned obsolescence. Everything today is made to be thrown away and re bought.... FN scumbags.
@Movieman19652 жыл бұрын
Back then before corporations started to try to get every cent out of something they focused on building products to last a lifetime. Sad it's no longer the case.... 😔
@shimxininahi80242 жыл бұрын
Comrade I can't believe you made steel mash potatoes out of the 1970 antique 5Ton jack. 1970 jack stole the show.1970 jack had out performed the current ones being made 50 decades before. Your demonstrations gave me the sense that 45 degree angle gussets should be welded around the tube and the O-rings could be doubled. Cheaply made jack designs companies make are just for profit and not for purpose and safety. Proven fact history can always repeat itself in some distorted form. Товарищ, не могу поверить, что ты сделал стальное пюре из старинного 5-тонного домкрата 1970 года. Домкрат 1970 года затмил всех. Домкрат 1970 года превзошел нынешние, сделанные за 50 десятилетий до этого. Ваши демонстрации дали мне понять, что вокруг трубы должны быть приварены косынки под углом 45 градусов, а уплотнительные кольца могут быть сдвоены. Компании, выпускающие дешевые конструкции домкратов, предназначены только для получения прибыли, а не для цели и безопасности. История доказанных фактов всегда может повториться в каком-то искаженном виде. Продолжайте хорошую работу!
@jdd-d41812 жыл бұрын
amazing !!52 year old jacks is still working well..eventually he was crushed..😔
@amanawolf91662 жыл бұрын
The moment I laid eyes on that 2021 jack, I knew it looked like a POS. I like old stuff pre 2000s, times when products were made to last.
@PaulUptonIm2 жыл бұрын
LOL, That funny, in the 1990s we said that anything made after 1970 is crap. Can’t wait to see how crappy tools are in 2040. They’ll be making jacks out of styrofoam.
@bradleypease24922 жыл бұрын
@@PaulUptonIm the new Chevys come with plastic jacks - have a search on here
@PaulUptonIm2 жыл бұрын
Wow, they sure do. That’s crazy. They are recalling them because, guess what, they break…shocker.
@ENDERTON20002 жыл бұрын
I had a 1984 chevy pickup and the fenders, cab, pretty much anything metal on it cracked and broke, under no duress. my family was steel mill workers until they shut them down, and decent, 🇺🇸 made steel didn't just break
@mcrib57942 жыл бұрын
Oh look what I found, a bunch of cavemen here! The old jack is worth $100+ like what's addressed on other comments. Of course it's going to be more overengineered. Both met their specs and surpassed them. But people nowadays talk crap way worse than the product they talk about.
@sukhrajbajwa3262 жыл бұрын
Old is always gold ❤️❤️
@_James_Lee_Show Жыл бұрын
That’s why old stuff works better then new stuff
@eckbru2 жыл бұрын
thx for this demonstation...... the "older" the "better" !
@moviestories42232 жыл бұрын
I am a technician who disassembles hydraulics for hydraulics. In the 1900s, the rubber seals were damaged, so the quality of the hydraulic inner material was reduced.
@waycoolscootaloo2 жыл бұрын
I want to see one of those fancy 1,000 ton Jack's vs the 500 ton press. 😉
@crosleyman502 жыл бұрын
Knew from the start the old one would win. I have a couple like that and they still work great.
@VeteranAnimosity2 жыл бұрын
Nothing like the old metal jacks.My dad still has a 1960s jack still going strong
@isaacportela65772 жыл бұрын
Ingrivel como as coisas antigas são mais fortes que às novas🎊🎉
@lucassantana69112 жыл бұрын
+Qualidade né patrão
@fabiotnasc2 жыл бұрын
Xingling também
@lucassantana69112 жыл бұрын
@@fabiotnasc o q mais tem hj em dia é isso ae msm
@cliffroebuck22772 жыл бұрын
Made in China
@1fast72nova2 жыл бұрын
@@cliffroebuck2277 that's exactly what it is. But not only that, look up the light bulb conspiracy veritasium video
@cattila12 жыл бұрын
Back when i was an apprentice car mechanic we had and old bench press rated to 20T built in 1942, that thing never had a break down in the 4 years i was there. However the guy that wanted to be the boss of the shop felt like we needed a new and better one that was rated to 30T, i don't really get why, we used it to push out worn out ball bearings on cars and sometimes vans. Anyway we got it and it folded like a lawn chair at the first use, guess what did not YES the good old one that was build to last ;D
@colinfielder66952 жыл бұрын
I agree with the others comments of saving the 1970s jack but also wondered about the lack of hydraulic oil from this one!
@umiumi8792 жыл бұрын
This is how to make an oldschool jack C5 Corvette compatible 😎.
@TheAqousGaming2 жыл бұрын
Old is gold . Old things is stronger than present tools 💖
@esmokebaby2 жыл бұрын
Takes the old saying "they don't make shit like they used too" on a whole new level
@cesarpalmos82352 жыл бұрын
I wonder how an American made moder jack would've done. The chinese use less steel for profit and for shipping reasons.
@aheavymetalrider1293 Жыл бұрын
"Finally, A Worthy Opponent , Our Battle Will Be Legendary"- Tai Lung
@aarishbhagat95832 жыл бұрын
Bro *OLD IS GOLD ALWAYS*
@luanferreira82492 жыл бұрын
As coisas antigas são sempre melhores🇧🇷
@shauljonah69552 жыл бұрын
Si very true 👍
@straightupal2 жыл бұрын
Panela velha é que faz comida boa
@pedrolucas58842 жыл бұрын
Então já pode vender seus celulares e comprarem o tijolão!! 😁😁
@emmanuelgaitan25892 жыл бұрын
Pan
@butcherbaker42582 жыл бұрын
I can't rational explain why I love seeing new and old tools destroyed and smashed when I depend on tools for everything. I wish I had more time to watch👍🏻🇺🇲
@geekswithfeet91372 жыл бұрын
@@mikej6565 probably the same rationale you apply to jumping in on random unrelated comments to display your absolute ineptitude in politics that completely ignores that you guys literally tried to steal democracy by force less than a year ago.
@prospero85922 жыл бұрын
@@mikej6565 u good bro?
@carloshenryke Жыл бұрын
Background sound of terminator was good! 👍
@alivenaware2 жыл бұрын
Why are these so relaxing
@seanwiggins2 жыл бұрын
7:10 - the old jack sheds a single tear
@cosminogloocosy11542 жыл бұрын
😢
@nhanhnguyen5902 жыл бұрын
😇 🙏
@022_nk62 жыл бұрын
Prova q antigamente as coisas eram melhores do q hj em dia
@iMiilk1822 жыл бұрын
Melhores como se os dois passaram na especificação? Errado é quem compra um Jack de 5 ton e quer que ele funcione pra mais que isso
@022_nk62 жыл бұрын
@@iMiilk182 mas q é invejável q a antiga abue aguentou mais do q a nova não podemos negar, então a qualidade dela consequentemente é melhor mesmo já tendo se passado vários anos
@iMiilk1822 жыл бұрын
@@022_nk6 uma Ferrari de 1980 é melhor que um gol? Claro que é, ela vai mais rápido
@022_nk62 жыл бұрын
@@iMiilk182 n estamos falando de parte mecânica ou carros e sim de construção de material mano
@022_nk62 жыл бұрын
@@iMiilk182 vai me dizer q não concorda q antigamente as coisas pareciam mais bem feitas do q hj em dia
@Zarathustraa.2 жыл бұрын
Background music makes it seems like a serious mission in games!!
@bengacz2 жыл бұрын
Many are praising old jack and are hating new, Chineese. Why? That new cheap jack did it job reaching declared capacity with a good margin. 25$ jack that reaches its specs and lifts 5t? That's a great deal! Old is cheaper ...now, but i bet it didn't cost equivalent of 6 cups of coffee back in it's days. Plus it's probably renewed. I'm not saying it's bad (if i would have to choose, i would choose the renewed one), but just saying "OLD IS GOOD NEW IS BAD" is just ignorant.
@jamessasser5572 жыл бұрын
Let’s give a moment of silence for the 1970 jack it has outlived its expectation
@Tamarikankuro2 жыл бұрын
Bless you james Amen 🙏
@danielmeador19912 жыл бұрын
I got a 1950s jack it still works and it’s been through hell
@earningmasterbd89752 жыл бұрын
Seriously old is gold 🥇🪙
@gutz19812 жыл бұрын
The old dog should have been left to keep fighting. He gave it his best and was still going strong. Sad end for a piece of history.
@latinumbavariae2 жыл бұрын
That crushed old jack looked like something you would find lying around in Fallout 3.
@surfstarcc12 жыл бұрын
WOW That old beast took 30 tons before the hydraulics gave out.
@vigyaupadhyay64482 жыл бұрын
The simple thing I want to say“ old is gold”
@Cheepchipsable2 жыл бұрын
So, Granny better watch out?
@vigyaupadhyay64482 жыл бұрын
@@Cheepchipsable yes
@divlles2 жыл бұрын
I love how the older Jack was much easier to get to 3 t and even went beyond that really easily versus the new one struggled to get to 3 t and go past it you had to work so much harder to get to the same weight capacity
@startingbark03562 жыл бұрын
Hé used a shorter stick in the beginning with the new one
@maxalfredjoelasemoule39932 жыл бұрын
Why am I not suprised ? What an illustration of the decaying quality of the world we live in. Industrials now know all techniques to save money when producing goods & equipments, and customers worldwide rush on low prices. As my granny used to say, dreaming of a Ferrari with the pricetag of a Citroën 2cv is the best recepy for headeaches.
@mitashutonk96042 жыл бұрын
Old is always gold
@Avgen892 жыл бұрын
Я один пустил слезу, когда советский пресом раздавили?
@Wreck-Gar2 жыл бұрын
Perfect music to finish with 👍
@TheCrazyCanuck4202 жыл бұрын
Just realized I'm not in the hydrylic press channel ... boo this man!
@volvo245glt2 жыл бұрын
Most modern stuff are junk, or at least built to specifications and absolutely nothing more. You could've given that 70's jack a good clean and a fresh coat of paint, and it would've both looked like new again and lasted for another 50 years. 😁
@Loveter.city93052 жыл бұрын
อยู่ร้อย 100 ปี ก็ยังได้😁
@gagandeepsingh782 жыл бұрын
Gracious comment
@Bobbywolf642 жыл бұрын
They made junk in the past as well, and it has long since been thrown away leaving the good quality stuff behind to survive. You certainly have a point though, as most items nowadays are junk, where before, only some of them were junk.
@mcrib57942 жыл бұрын
You overuse something and call it junk. That's stupid. Modern things are engineered to be more cost and material efficient, making it more affordable while still being up to spec.
@CelebrityTools2 жыл бұрын
@@mcrib5794 you are absolutely right !
@michaelsmith29242 жыл бұрын
The 1970s jack was forged and machined. That Chinese jack was all cast.
@PhysiqueGeek2 жыл бұрын
I don't think it is, even the common cheapo $25 Torin bottle jacks are a drop forged construction
@levinho-freef22232 жыл бұрын
This is the Prof that OLD IS gold 🏆😍😍🥰🥰 Love you and your videos bro 🤜love ❤from india
@MRHUDARI20112 жыл бұрын
THAT'S WHY OLD IS GOLD!!
@straitouttahell2 жыл бұрын
What I learnt today: 5 tons jacks make 5 tons force :)
@r1learner1782 жыл бұрын
Who'd have thought?
@davidromero40522 жыл бұрын
Por que destruir el que funciona perfecto???? 🤦♂️ me dio pena en verdad
@jean-francoisbex38352 жыл бұрын
Je suis aussi scandalisé de voir détruire un outil dont on viens de démontrer la qualité supérieure, l'efficacité malgré les années face aux productions actuelles, et qu'on ne reproduira plus. C'est idiot.
@danielcannon17212 жыл бұрын
Just like they say, old is gold.
@ironvulture20152 жыл бұрын
this proves that things were better back in the good old days