Let's compare objects from different eras with the help of a hydraulic press. Which items are stronger, old or modern.
Пікірлер: 17 000
@shibuchettri21152 жыл бұрын
"Don't repeat this at home" *Me slowly putting back my hydraulic press in my pocket*
@subtostevyum23402 жыл бұрын
@@fisusolina7315 liar
@keegany4r1762 жыл бұрын
Caught in 180p.
@apratimkrishn55462 жыл бұрын
@@keegany4r176 yes
@soulthedripman36202 жыл бұрын
@@fisusolina7315 What the fuck
@DatKatBlacky2 жыл бұрын
That was me too 😿
@shashwathnandha41142 жыл бұрын
"Don't repeat this action in home" Yes, we have hydraulic press at our home.
@uetaq56622 жыл бұрын
😂😂😂😂😂😂😂😂😂
@user-pi4wg9gn4j2 жыл бұрын
🤣🤣
@staneessomba2 жыл бұрын
🤣😂🤣
@legosi31172 жыл бұрын
Vc ñ tem ?
@Anonymous-ym2yq2 жыл бұрын
@@legosi3117 you have?
@BraveGuardian9 ай бұрын
As a civil engineer, this material at 8:27 is not concrete; it's mortar. The difference lies in the absence of coarse aggregate in this mixture. However, the old block we can see contains coarse aggregate, making it a concrete structure.
@stevendunnuck9 ай бұрын
yeah i agree. the added rock makes it much stronger. makes me question the authenticity of the whole video really.
@MyPalJimbo9 ай бұрын
I'll wait for a second opinion from an uncivil engineer, if it's all the same to you
@stevendunnuck9 ай бұрын
@@MyPalJimbo what's a uncivil engineer?
@MyPalJimbo9 ай бұрын
@@stevendunnuck it's like a civil engineer but it insults you and uses foul language
@stevendunnuck9 ай бұрын
@@MyPalJimbo ah I get it
@garrettord33049 ай бұрын
The axe was the most impressive IMO - it was softest further back with increasing hardness toward the cutting edge of the blade. That's exactly like old swords and axes were designed to be in order to retain their shape and edge while resisting shattering on impact. It's rare to see it demonstrated so clearly.
@reecechapman-spencer73099 ай бұрын
It isn't that impressive, pretty much every knife or cutting tool out there is designed the same way.
@deniswauchope37888 ай бұрын
I'll bet the old axe would keep an edge far longer than the new one. It would be interesting to find out if that's true; I know some new cheap knives are pretty good at keeping an edge, which surprised me, but then metal technology has gotten better.
@halycon4048 ай бұрын
@@deniswauchope3788 Doesn't help he's using one of the cheapest axes he could find. Same with the sledge. Though that one means a whole lot less to me, anything a sledge is used on it's the impulse force of the material that really matters not sustained stress. I've hit an i-beam encased in concrete before with a solidly built sledge, they chip and take damage. The new ones just keep going. *shrug* Part of it is we got better at designing things for their actual use case.
@Tugela608 ай бұрын
@deniswauchope3788 It depends on the steel used. High quality modern steel will hold an edge much better than older steels. You get different grades of steel and their properties are quite different.
@matschulz41638 ай бұрын
yeah doesn't mean much when the old stuff is compared ot the cheapest modern equilvalent possible.
@obitoyornyi9542 жыл бұрын
Finally its proves that..OLD IS GOLD
@jclay66802 жыл бұрын
And New is cheap .
@aviorio33412 жыл бұрын
Ya it's true
@jacoblehman87142 жыл бұрын
Well yes. But it's the way it was made which makes it better not necessarily when it was made.
@nickarganbright72182 жыл бұрын
To be fair that "new" one did look to be pretty low quality, would like to see how a more reputable brand would hold up. Obviously neither were hardened steel, a hatchet should definitely break well before it is able to bend that far
@shinchando72402 жыл бұрын
No it's proves Chinese quality can't be trusted.. 😂😂
@Jibbzz2 жыл бұрын
It's funny, my dad and I have been reusing my great grandpa's axe-head at the hunt camp. Just swapping the handles and keeping it sharp. I've tried a lot of axes for camping, and even the 'fancy' and 'modern' Fiskars axes go so dull, or crack after the Canadian winter. The only axe that's as reliable as my great grandad's has been a Gransfors Bruk splitter. Lasts the winters and doesn't crack or anything when we go back to the camp.
@dobby2452 жыл бұрын
Gransfors are 👌
@splittedchipper27882 жыл бұрын
I also have a Gränsfors hatchet, the carpenter one. It's a standard in my woodworking, nothing else can compare to it.
@sdmg.42 жыл бұрын
They are crappy nowadays, so they will break easier and make u buy a new one.
@lordadamz60362 жыл бұрын
Thins are made to break so you can buy new ones. Also it's cheaper to make, so more profit is attained. That sucks, I would love to purchase modern items with the quality of old
@octaneartllc2 жыл бұрын
Canaduh is communist now I wouldn't expect much...
@JeremyTheApe2 ай бұрын
Doctor: Sir, how did you hurt yourself? CHP: Well I was using a hydraulic press to see how much pressure it would take to fold an axe up like a burrito.
@Husker_XIII Жыл бұрын
My man was playing a dangerous game with the hatchets.
@philipcasey89982 жыл бұрын
imagine what a 100 years old hidraulic press can do
@cjdalton3201 Жыл бұрын
What, compared to a Chinese hydraulic press? Probably still outperform….
@ivansbacon Жыл бұрын
100 year old press vs new press.
@robocobrabot Жыл бұрын
This is why I came here 😂
@jsteel89 Жыл бұрын
lmfao
@thisismyrealname2860 Жыл бұрын
In other words, 50 Amish guys? Probably more than this video
@deadlyanimatorproductions73342 жыл бұрын
This brings to a whole new meaning of "old is gold". (edit: guys this is just a joke)
@kevindetwieler92122 жыл бұрын
Right and "they don't make it like they used to".
@Kristadamus2 жыл бұрын
but if it's actual 24K gold it will be like the new ones. 24K gold is really soft.
@solomonpagan39282 жыл бұрын
Ok but what are you doing that you are putting even 1 ton of pressure on your hammer
@rogerjolla23582 жыл бұрын
Its because is Chinese product this communists never done something good
@notacoolperson92372 жыл бұрын
I was gonna saw that
@noidont8149 Жыл бұрын
I feel like that first axe formerly known as would still make a heck of a battle club
@crwydryny Жыл бұрын
The reason the new hammer failed is because they are only face hardened rather than forged. Basically they take a plate of hardened steel and fireweld it to a soft steel back, this means the hammer is less likely to shatter when used This can be seen in how the axe fails by shattering rather than bending
@robertpendzick9250 Жыл бұрын
Read down to your comment and think this is the first one I saw that is better than many others. You do not want tool to shatter with its blows. The modern axe was safer in this respect, the old sledge was better also. Note that as the new sledge was compressed not only did the paint flake off but so did the sides of the metal splintered. Not what you want when hitting something. Why carpenter hammers are always used with eye protection (or it should be in use) as you never know the failure point of the nail or hammer.
@Sinderra8 ай бұрын
interesting, I didn't know this thank you
@nehoymenoy38452 жыл бұрын
This is hardened iron vs soft iron. The older one is made to last, but will bounce and transfer all the shock of a blow to your hand, wrist and arm when striking a hard surface, and if it fails it will shatter. The newer one isn't hardened, but is made to absorb more of the impact and not bounce back as hard. The downside is obviously that it can deform and will get gouged with use. They're both good tools, but shouldn't be used to do the same job. Edit: Since people still see this I should clarify that the newer one would work harden with regular use, aligning the crystalline structure and resulting in a hammer more similar to the old one, but having a softer interior. I stand by saying that the new one is still good, just not for everything without a lot of breaking in. In truth, yes newer tools suck more than old ones, yes. But a shit tool you treat as an extension of yourself is always more useful than a mythical relic in the hands of a novice.
@stylmaxiop88062 жыл бұрын
le soucis n'est pas la qualité de l'acier, mais uniquement la trempe.... j'ai eu des outils chinois qui se déformaient vite, j'ai juste eu à les retremper pour qu'ils deviennent très bon....
@gottingenundumgebung1992 жыл бұрын
@@stylmaxiop8806 Klar ich schreib jetz was auf französisch damit man es extra übersetzen muss. XD Peut-etre apprendes anglais?
@stylmaxiop88062 жыл бұрын
@@gottingenundumgebung199 les traducteurs c'est pas fait que pour les chiens ...lol
@darcy-yo2 жыл бұрын
@@stylmaxiop8806 Immo vero, Latine colloquamur
@rymi2082 жыл бұрын
@@stylmaxiop8806 yea true
@petcatznz Жыл бұрын
I’m always impressed at the hardness of the press facings in these videos, they never seem to be damaged by the huge forces that they are repeatedly subjected to!
@RayNoxa13 Жыл бұрын
You mean repeatedly supposed to
@petcatznz Жыл бұрын
@@RayNoxa13 Nope, I meant subjected to, e.g., to cause something or someone to experience something.
@RayNoxa13 Жыл бұрын
@@petcatznz thats weird
@petcatznz Жыл бұрын
@@RayNoxa13 It’s not weird really, it’s just english.
@RayNoxa13 Жыл бұрын
@@petcatznz yes i know that
@richardbalderas902310 ай бұрын
That Old ax wasn't playin with you! 😂
@alexdenommee32198 ай бұрын
I like this video because there is a lot in the comments discussing stuff about materials and their uses. It's actually kind of great, based on the banter and discussion, it seems this is basically hardened/heat treated iron vs newer iron meant to absorb more impact and deform vs spontaneous failing, even though the spontaneous failing of the axe took a hell of a lot and I don't think any normal human could have every broken that axe by cutting trees in their entire lifetime with that axe, unless the trees have iron/metals embedded in their bark or something rofl.
@mrmarksman49652 жыл бұрын
The moment he said "new Chinese hammer", I already knew who won.
@naixthedog2552 жыл бұрын
'Chinese' 🤣🤣
@JordanJcv2 жыл бұрын
Exactly 😂
@aryanguleria55402 жыл бұрын
😂😝😝
@mdkaifee70782 жыл бұрын
This deserve 100k likes 😂
@jonatanfelipeleguizamoange80762 жыл бұрын
🤣🤣🤣
@BushmasterXM15-E2S2 жыл бұрын
This takes the term “old reliable” to a whole new level EDIT: Omg thanks for all the likes, ive never had this many🙂
@CalebWFilms2 жыл бұрын
Yeah
@FUNNYpla2 жыл бұрын
Yup
@levitorres46172 жыл бұрын
heh heh
@jasonnorthcutt40082 жыл бұрын
It's so hard for us old guys to explain to the young people how crappy everything is now. And I don't just mean Manufacturing and chinesium made crap. Our country and culture has been degraded in the same way.
@kimecosx2 жыл бұрын
@@jasonnorthcutt4008 just show us youngsters videos like this and you don’t need to explain much, just wait for us to ask more about what you’d recommend for longevity
@nathanplunkett4641 Жыл бұрын
That old hammer was well used. Thank you for your service.
@mikehoward82019 ай бұрын
If you want a good sledge hammer, put a fiber glass handle in the old one! The best of both, less shock, more impact. I use an older sledge with a fiberglass handle with steel wedges to split large wood rounds for firewood. Works well.
@Nirotix2 жыл бұрын
Higher grade steel used, more carbon in the older items. The first sledgehammer test thou I have some fault with as beyond a doubt it's higher grade steel used in the older sledgehammer, but it was also cold work hardened as you can plainly see from the mushrooming on both sides. That old sledgehammer is probably close to a Vickers hardness of at least 8-10. Cold hardening/work hardening is by far better than hot. Hot is just quicker and cheaper to accomplish. That sledgehammer's probably seen 20-40 years of use.
@TheAtch30002 жыл бұрын
and made in a forge/anvil instead of molded
@arielariel51212 жыл бұрын
If I also believe that the iron of the old hammer is stronger
@perrylc88122 жыл бұрын
I’m in my 60s & still using my grandfather’s hammer. About 30 years ago replaced the original handle with hand carved hickory one & all is good.
@timhayes33362 жыл бұрын
had a bigger size handle too, so there's probably less metal at the weakest part in the old hammer
@ptrjnsn57192 жыл бұрын
Vickers hardness of 8-10is as soft as butter.... Tool steel like this would have a vickers hardness of about 300-500. But you can't say the workharding made it stronger all the way through since workharding only applies to the very surface
@Blazin7772 жыл бұрын
"Dont try this at home" Slowly takes apart the hydraulic press I built to crush antique and modern objects
@DatKatBlacky2 жыл бұрын
Sus
@glenecollins2 жыл бұрын
That is what the work press is for obviously
@Jo_BloАй бұрын
Loving that public domain version of the T2 theme lol
@user-bu2en3cl6s2 ай бұрын
Son, my mind went to a very dark place when you put that fine old axe head under that press.
@jimmcneal52922 жыл бұрын
Those "modern" sledgehammer and axe seem to be made from stainless steel. Of course they are softer. Plus there is a bias - since those "old" tools survived till this day, this can mean they were one of the best of their time.
@NoNoseProduction2 жыл бұрын
Yeah but the old tools have also aged to the point where they're damaged by time , wear and use. The new tools have only manufacturing being their problem
@priyamupadhyay94972 жыл бұрын
@@NoNoseProduction Metal don’t age.
@NoNoseProduction2 жыл бұрын
@@priyamupadhyay9497 yes. Yes it does.
@prospero85922 жыл бұрын
Yeah, people just fucking love to say things used to be better, I guess they feel smarter, but the fact is that the newer hammer will probably survive to oxidation and it's made to work in different conditions that the older.
@Arthur-kq7qr2 жыл бұрын
Definitely not stainless steel. Lol.
@chrisose2 жыл бұрын
These results represent some of the reasons why I cherish my older tools, including a 16oz framing hammer I have had for over 30 years.
@deathlyrose79112 жыл бұрын
sorry but that 16ox hammer would not even remotely be seen as a framing hammer anymore more like a finish hammer due to its low weight lol . sorry spent 20+ working construction and demo to me anything under 28oz is hardly even a hammer to me
@dobocsillag70072 жыл бұрын
@@deathlyrose7911 i have a 352oz hammer (10kg) 🤣🤣 and that hammer is older than me
@deathlyrose79112 жыл бұрын
@@dobocsillag7007 i have several old axe blades around just need new handles and as for hammers i have everything from a TINY 4oz all the way up to a 16 pound sledgehammer i personally never us anything lower than 32oz for framing due to anything lighter NOT being able to sink the nails faster enough lol i prefer doing my job as fast as possible so a dinky hammer is not what i am going with lol
@dobocsillag70072 жыл бұрын
@@deathlyrose7911 i have many tools too, waiting to restore them. My grandparents was gardeners so i have a huge chest full of axes without handle, and many other old garden tools around the house. If i need a new tools, i just go to the barn and restore some of them 😂
@deathlyrose79112 жыл бұрын
@@dobocsillag7007 my grandfather was the same way never threw away a tool head if the handle was broken even have some tools of his that date back to i think his grandfather
@XtrminatR717 күн бұрын
Minecraft Steve: "You need a whole ass hydraulic press to crush that concrete? Pathetic."
@Altair8859 ай бұрын
Hey that's great! I always wanted a compact sledge hammer that I could use in a tight spot! 😁
@geebsterswats2 жыл бұрын
Concrete massively increases with strength over time. Concrete is known to continue to cure for 100 years or more. Plus you have to factor in aggregate ratio and size.
@glenecollins2 жыл бұрын
Concrete is also made to suit the purpose it is getting used for, I agree the “modern concrete” didn’t appear to have any even pebble sized aggregate in it. It was probably just lime, a bit of quicklime and sand, sets fast and is ok for foot paths and stuff not for fortress walls.
@killstupidity73992 жыл бұрын
I Rememeber about 1 month
@dakotareid15662 жыл бұрын
Hence why Roman concrete is still around
@kaushlhi10812 жыл бұрын
This is real
@aravindrajcm0072 жыл бұрын
Also olden days they use WSM method
@MeloniusFelonius2 жыл бұрын
It's a matter of the grade of the steel, as well as the density. We tend to make things less dense today so the tool in question can be lighter and cheaper, while still retaining functionality for its intended purpose. Also, those are cast steel parts, not forged- so as you can see, when put under high pressure, the steel doesn't just bend, it breaks. That's because cast anything has more brittle and weak areas than something that's been forged. Overall though, those cast tools are very strong and sturdy for their purpose, but when facing high pressures, they're brittle and break easily. Edit: My saying density and grade of steel impacts it is partially true. Grade is only an impact if it's some sub standard steel. Structure of the metal is a main factor (hardening another). Cast metal has a random, porous grain structure, while forged objects keep their grain structure tight. This results in the crystalline structure of forged parts being stronger than that of cast. Density can play a factor, but after a year of learning more, I wouldn't say it's a main one. There's also methods like hardening (talked about in replies and other comments). At the end of the day, this doesn't matter as long as you use the tool for its intended purpose.
@ceilfox12472 жыл бұрын
There are also factors such as work hardening that can have a surprising effect although you can see the newer hammer head is an awful low grade piece judging by the pitting before it’s crushed.
@Lobo_Lunar262 жыл бұрын
Menos Aristóteles!!
@1uhbuvall9672 жыл бұрын
Also cheaper material means more money but not for the consumer because cheaper won't last have to buy more.
@zflipside2 жыл бұрын
Thank you for this explanation!
@JohnDoe-gg6kc2 жыл бұрын
Honestly, the mild steel from the chinese is safer in many ways because it wont shatter due to an explosive brittle failure mode. Users are typically the problem now adays.
@rodneymcdermott53037 ай бұрын
Ok, as a welder/steel worker/fabricator, I was literally squinting when you were crushing the hammers 😂🤣daughter was laughing her butt off at me! Asaaaaand a little salty over what you did to the old axe 🤨🥃🥃🥃🥃seriously though, love the video 🍻👍
@100puremustard57 ай бұрын
The phrase "They don't make em like they used to" comes to mind 😂
@johanrynjah82412 жыл бұрын
This is why I treasure the antique tools handed down by my father to me, some of which belongs to my grand father right from the second world war . .(old tools are made from virgin metals directly from the ore while most modern tools (except premium ones) are made from mixed recycled metals).
@lelo53452 жыл бұрын
Verdade!
@Chevymonster2032 жыл бұрын
Chinese use cheap inferior steel, you can literally watch videos of guys bending rebar with their hands that is suppose to be support for skyscraper columns. I am also going to assume that the Chinese made hammer is not heat treated and then annealed. The steel probably contains high amounts of sulfur which makes steel brittle. Trust USA made steel products, all tested to high tolerances.
@ministryofwrongthink69622 жыл бұрын
@@Chevymonster203 Yeah besides using cheap materials they probably cut even worse corners than we even know at first
@angelicalazaro46472 жыл бұрын
Same story with my son
@Barmaglothus2 жыл бұрын
The quality of forged metal is always higher than that of stamped metal, if made properly. But, in absolute prices, tools were more expensive that days.
@tavares39 Жыл бұрын
As ferramentas de antigamente eram feitas de matérias extraídos diretamente da natureza. Exemplo: marretas e martelos feitos do minério de ferro. Hoje em dia a maioria das ferramentas que utilizam ferro são de materiais reciclados, por isso são mais frágeis.
@rogerioale7677 ай бұрын
Outro detalhe, a primeira marreta era de aço, já a nova, era de alumínio, não tem nem comparação dois materiais distintos.
@JohnnyBGoode-gh5ip Жыл бұрын
You inspired me to buy a hydraulic press and now my friends have too! Gonna try this.
@TheNewRogue222 жыл бұрын
So this is why my grandpa says “They don’t make ‘em like they used to”
@rxmirezz72 жыл бұрын
Now everything makes sense
@Austin-kl7ho2 жыл бұрын
Also not being racist but it was Chinese so it was cheaper Materials
@Neg-Ros2 жыл бұрын
@@Austin-kl7ho sad but true...almost everybody knows Chinese products are knockoffs...
@atomictyler2 жыл бұрын
sure they do, but people don't want to pay for it
@happinessallover2 жыл бұрын
when he said chinese I knew what is winning in the sledgehammer battle.
@packinaglock2 жыл бұрын
The Chineezium metal was no match.
@bensonlin82452 жыл бұрын
That's abit racist
@RakeshKumar-zj2nj2 жыл бұрын
Exactly I too
@los_182 жыл бұрын
Well what can u expect from china product.?
@djadam14852 жыл бұрын
🤣
Жыл бұрын
I didn't see the intro so I did it at home and now all my new stuffs are broken. Good that my old ones are still intact.
@shravanpaloju127911 ай бұрын
How to find out the pressure and speed of the hammer if we throw from 1 meter.
@jaegerolfa2 жыл бұрын
Long winded comment but if you're interested; I work with concrete as a career. The problem with the concrete test is that the "modern" concrete didn't have any aggregate in it. That's the gravel and sand you see when you chip open the surface of your driveway. The "antique" concrete is still considered to be modern seeing as concrete was invented in Rome way back, which actually hardens in salt water whereas today's concrete will degrade in salt water. We lost that old Roman recipe. Anyway, what I'm trying to get at is that concrete hardens over a course of time and is completely set within a few months. Also, we put steel rods in our concrete today to give further flexibility to the mixture. There are a ton of other factors, like water/cement ratio and the sand/gravel ratio, the number of pounds of cement that goes into the mix per yard also, the quality of the limestone, which reacts with the water to create an exothermic reaction turning the limestone into another compound and "gluing" the gravel and sand. The first block of "modern" concrete could've easily reached 18tons/psi if mixed and aged correctly and could've been on par with the "antique" concrete.
@enriquedossantos32832 жыл бұрын
Totally correct, and if you put some Steel beans and mesh inside that cube, I would go exponentially higher
@ILoveDavidsMom2 жыл бұрын
Also I’m pretty sure the first block was not cured yet, looked pretty wet on the inside to me.
@ILoveDavidsMom2 жыл бұрын
@@enriquedossantos3283 steal beans and mash? ;)
@samueljackson80272 жыл бұрын
I do concrete as well I’m glad someone had already mentioned that because that’s the first thing I thought of
@dawlben22472 жыл бұрын
They found that the Roman concrete for sea water had volcanic stuff added to it. The chemical reactions betwen the concrete and the volcanic ash and rock enhanced the strength of the concrete.
@PhysiqueGeek2 жыл бұрын
The sledgehammers looked to be made of entirely different metals imo, not to mention the older one has definitely seem its fair share of work hardening based on the mushroomed edges. As for the concrete, again different compositions, but it's also well known that concrete only gets tougher as time goes on. My burned out sds bits can attest to that one lol.
@Robot8312 жыл бұрын
It was 100 tons of weight... That's 20 elephants... The older ones handle didn't even break. 😳
@GamerNerdess2 жыл бұрын
That's what happens when you outsource things to China.
@matthanmigelkristian90652 жыл бұрын
69
@CameraMan18162 жыл бұрын
@@matthanmigelkristian9065 70:)
@Pori93922 жыл бұрын
Concrete weakens with age
@Sinderra8 ай бұрын
it is interesting to see the effect that mass production has had on the quality on items, as well as the different advancements in the modern day tech
@BrianKrahmer8 ай бұрын
it's not that mass production has had any effect at all on quality. quality of items is entirely chosen by the company building them.
@urijat8 ай бұрын
That's why I value my old tools. They just need to be restored and looked after. Then they are better than any new tool.
@gorjax22462 жыл бұрын
New axe: gets turned into a metal cheerio Old axe: cuts the hydraulic press in two
@QuantumS1ngularity2 жыл бұрын
Went exactly as expect. I seriously doubt someone was surprised by those results. But as for concrete, there isn't any other way. Especially if kept wet or in moist environment it gets stronger over time.
@freedomfirst54202 жыл бұрын
Yes, the older the concrete gets, the harder it gets.
@overlordp.37582 жыл бұрын
The Romans made better concrete
@martinsrc87522 жыл бұрын
Why it doesn't apply to cars😀
@halolajas2 жыл бұрын
Yes, but if we want today we can create much stronger materials, like concretre almost as stromg as steel. Hammer and axe could be first rate too.
@fnjf29012 жыл бұрын
You need to work on your english…
@cableguy130 Жыл бұрын
Would love to see a thermal camera on that
@luiszuluaga6575 Жыл бұрын
That was just awesome to watch
@graysonschaer57902 жыл бұрын
Just a note, the yield strength of mild steel is 200 MPa while the pressure gauge read a max of 20 MPa during the crush of the "new sledge". This is 10 times less than expected were the hammer head to be made of steel. While there is a hole in the middle of hammer head, this type of geometry results in an decrease of only tensile strength by only a maximum of 2 times. Further, the metal shown beneath the black paint after crushing is dull grey and slightly bluish in color, not the typical bright silver of steel. Because of these two things, I believe the first hammer is not made of steel. Instead I bet it is a homemade casting made of lead. Not only does this match the color of the material shown, but also the yield strength of lead is 18 MPa. This is exactly the stress value on the pressure gauge indicated when the hammer head started to fail. Still a fun video to watch though!
@chitogekirisaki5702 жыл бұрын
Big brains
@mattlawton47152 жыл бұрын
Nop
@gabeaugustine74872 жыл бұрын
Yah, I'm at uni for material science engineering and actually just finished a project talking about grain size to yield strength ratios, and even at very unrealistically high grain sizes (so low strength) following the hall petch equation steel's yield strength sits at 100 or so MPa, so worst case scenario it deforms inelasticly at 5x what the gage shows.
@nomore53952 жыл бұрын
You are right boi
@keeganandjakey2 жыл бұрын
I personally wouldn't argue that it's a cheap Chinese hammer . It's soft and easily broken . Been there broke that . As u are obviously educated on the the topic u should know making tool steal etc is a art form and can easily manipulated on the side of profits . It's a numbers game theses. Companies are banking joe blogs going it was cheap I was abusive towards it, or it had a good run it lasted a few years. (Really it did 2 jobs ) , 99 times outa 100 it's not returned.
@roseblite64492 жыл бұрын
Old Hammer - soak it in vinegar then restore it, then get a new handle. It should last a lifetime or two. Old axe - break out the welder for areas that broke, re-temper, sharpen and add a new handle. That blade took the least damage, so once repaired it should last a long time. Old concrete - yeah find out what it was made out of and if you need concrete use that formula. Probably a Roman Concrete using volcanic ash, lime, and seawater. A lot better than the commercial concrete we use today.
@texanplayer76512 жыл бұрын
That ol' sledgehammer can last a lifetime or two you say? I hope you mean civilization lifetimes
@roseblite64492 жыл бұрын
@@texanplayer7651 Providing the sledgehammer isn't left in the weather, a couple of centuries of more wouldn't be surprising.
@m.r.rodriguez1412 жыл бұрын
Or recycle for $, but before going through all that trouble, just buy a better replacement so that you don't get work delays due to bright ideas.
@serg_sel75262 жыл бұрын
Old hammer was repaired about two months ago, I didn't see old axe anywhere now. Also this concrete was created in Russian Empire. This channel is a copy of Crazy Russian Experiments. Nowadays we use DIY 500 tons press.)
@sora25342 жыл бұрын
The old concrete is good because the ratio of sand, aggregate, water, and concreting ash is correct, the size of the aggragate also plays a huge roll and should be the size of anywhere from large blueberries to large grape size but idealy the latter is a better option, concrete these days has a cheap pea gravel aggregate that's usually not mined but instead dredged off shore or in other bodies of water or on coasts, its cheaper that way instead of hand picking rocks that are the right size
@MyVwccStar2023 Жыл бұрын
"Do not repeat this at home" Me: "Oh" *Slowly turns off my hydraulic press* 😂
@TimothyHarris-tn4fo6 ай бұрын
Things were better in the old days much much better good video
@lambof316God2 жыл бұрын
7:40 at this point he regretted destroying such an amazing axe....rip you soldier you rip.
@sirblank23842 жыл бұрын
If welded properly it would hold off the life for a while while no one can really do anything with the modern axe it was made to look nice
@mems57662 жыл бұрын
And the best part of the axe is that the oxidized steel deals 50+ poison damage
@shajijohn75932 жыл бұрын
Old is gold ☺️☺️
@mdnabidulhassan33912 жыл бұрын
Yes
@islamictv20202 жыл бұрын
no old is diamond💎💎💎💎💎💎💎💎💎
@persian12282 жыл бұрын
No, made in china is all duplicate ..
@bouaidaoussama55322 жыл бұрын
Of course
@harishthakur85882 жыл бұрын
@@persian1228 right 💯☺️
@KevinChernenkoff Жыл бұрын
Cool video! I would have liked to see the modern concrete be a better quality block. That one looked really sandy for some reason and not what I've observed with modern concrete.
@Nempo13 Жыл бұрын
Most concrete IS really sandy in modern times. They don't make concrete this day and age the way they SHOULD make it. It is rare that they make concrete as hard and durable as it should be and is usually reserved for certain floors like hospital operating rooms or the inner most section of bunkers. All other kinds of concrete you see typically have more sand in them and are a softer rock for lack of any better descriptor. Are they load bearing? They have a I beams in them then typically and the concrete is just being used as a sheath.
@KevinChernenkoff Жыл бұрын
@@Nempo13 thanks for replying! I guess we balance longevity vs. cost these days.
@UP-BEATMUSIC Жыл бұрын
Thats a fight between what's pure and impure
@kacademy79212 жыл бұрын
"Do not repeat at home" Yes we all have hydraulic press at home.
@hassanmeer4772 жыл бұрын
lol
@BMoney772 жыл бұрын
He meant for the people that do have one dumbass! No I’m just kidding. I was thinking the same thing lol
@karthikmishra31882 жыл бұрын
@@BMoney77 people having a hydraulic press at home definitely know how to use, why would they have it otherwise. So no it's not for them.
@wbacn2 жыл бұрын
@@karthikmishra3188 r u blind m8? He just said he's just kidding bruh
@karthikmishra31882 жыл бұрын
@@wbacn I ain't. He just didn't have to be rude.
@kaylamarie83092 жыл бұрын
This is exactly why I like to find old tools at antique shops, flea markets and yard sales..and that antique concrete, wow!
@totalsketching55992 жыл бұрын
kzbin.info/www/bejne/povHo3ilZcZ2rKs
@Petroschka19792 жыл бұрын
I still do concrete like the older times, more cement. When you have to remove the concrete, an older friend of mine teached me how to mix it properly, you are basically fucked up 🤣🤣🤣 Because one time we had to remove concrete on his property, he told me that he made it. I looked at him like, you are kidding me...... Because I knowed. Was fun to remove. And we had good machines to remove it. Usually u use 1/3 but we use 1/1 cement/sand ratio 😬
@tommymatthews49842 жыл бұрын
Same I bought tons of old tools. I have a old duct work hammer that has been the best I've ever had and it still had the company logo on it being like 70years old.
@feliciahauw27562 жыл бұрын
Yupz right getting old more strong ladies,
@kaylamarie83092 жыл бұрын
@@Petroschka1979 wasn't it the Romans who came up with that concrete? I know it's tough stuff!
@Dudewitdaplan22 Жыл бұрын
Hydraulic press is savage AF! Don’t take no prisoners! We need to see the ultimate showdown of Hydraulic Press vs Hydraulic Press lol.
@supermaximglitchy118 күн бұрын
Old items were built to last while modern items were built to sell
@isaacportela65772 жыл бұрын
Incrível como as coisas antigas são mais fortes. 🎊
@fabricoalvarez88202 жыл бұрын
Todo hierro antiguo es más fuerte el nuevo no sirve
@OMATHEUS7772 жыл бұрын
Eu tenho o marteloo rsrsrs
@Krizalid3YE2 жыл бұрын
É porque a primeira marreta, a antiga, era ferro fundido. A segunda, a mais nova, quando foi mostrada, já deu pra ver que o metal não foi fundido, apenas moldado, cheio de rachaduras e lacunas.
@robespierreoincorruptivel14672 жыл бұрын
@@Krizalid3YE bom saber
@gustavoaugusto74672 жыл бұрын
As coisa de antes usavam ferro mesmo, agora eles misturam
@RuminateMusic2 жыл бұрын
Moral of the story :- *"OLD IS GOLD"* ✨⭐
@89thkey82 жыл бұрын
?
@marekward6202 Жыл бұрын
Nice new handle for your old hammer now😄
@KuDastardlyАй бұрын
The axe comparison kinda reminds me of when auto makers opted to integrate crumple zone systems into their cars.
@dyeavolshackelford96952 жыл бұрын
The "new" concrete looked like it was only sand, while the "old" concrete had aggregate mixed in which would increase strength.
@user-di5bo1lr1o2 жыл бұрын
aggregate
@dragokirodoso89112 жыл бұрын
@@user-di5bo1lr1o aggregate"
@tommymatthews49842 жыл бұрын
The old stuff probably had bad for health or environment stuff in it tbh lol back then there wasn't as many safety standards
@johnsonkonggidinata77332 жыл бұрын
The longer curing duration, the better the mixture will be lol
@JuaniM122 жыл бұрын
Te new concretes can resist tensión above 30MPa easily (there are high resistance concretes with 100MPa), supposing this block has 15*15 cm, its taking only 2.6MPa. I think its only sand and have a high relation whater/cement (low cement quantity)
@jayshulan7622 жыл бұрын
I wouldn't be surprised if the old tools were die struck, making them far harder than cast tools. Casting is easier, but if you need a lot of high quality then die striking makes great tools.
@DrewDubious2 жыл бұрын
new tools are made with steel that has fillers in it to reduce cost, also old tools were made to last where new tools are made to fail so there is more demand.
@stevekirby97972 жыл бұрын
Agreed, but if companies built tools to last, they'd go broke. This world we live in (like it or not) is the biggest era of waste in history, only recently have we realised how much, and are taking measures to help fix it, albeit ever so slowly.
@thompsoon32 жыл бұрын
Yeah they mix the steel with things like aluminium because if it's 50% steel 50% aluminium you can basically make 2 axes and still sell it as a steel axe. Back in the 60s it was 100% steel.
@Masterfighterx2 жыл бұрын
@@DrewDubious New *cheap* tools* Hultafors makes one that I'm fairly sure is made more like they used to.
@deathlyrose79112 жыл бұрын
@@stevekirby9797 are you kidding craftsman before it was bought out did just that they made great tools AND had a life time replacement IF you broke one but since KMART bought out sears and craftsman it is now recycled SHIT metal that i as somebody who grew up in the scrap industry do not even consider METAL really because TIN is stronger than some of the crap being sold today
@ranger1789 ай бұрын
concrete gets stronger the older it is but also depends on the mixture how much Portland cement is in it and the gravel size; it takes at least a month to get even halfway strong concrete.
@bobhummel75179 ай бұрын
And if you look close, the "new" concrete looked like a wall mix with almost all sand. Not even close to compare. We break cylinders all the time and our 4000 psi crete breaks over 5k. Many of the farms we deliver to have concrete that is 50+ years old and still looks good. There are so many factors involved when pouring crete to take into consideration.
@MDG74 ай бұрын
I jump of my seat with the old axe! 🤣🤣
@gunraptor2 жыл бұрын
I don't know much about concrete, but I know that modern, civil use concrete will never compare against high strength military concrete. They measure entirely differently, specifically in these kinds of tests. One has to survive skateboards, the other has to survive direct hits from naval artillery. A better test would be modern military concrete, say from a nuclear missile silo or bunker, vs the old fortress concrete. I doubt your press is strong enough for either, though.
@king.jarjerk42012 жыл бұрын
There's not much difference between the "military" concrete and what's used for the foundations of large buildings. Silos will use thick concrete to line the outer diameter of a thinner inner diameter of the bunker. It's just more cost effective to do it that way. But yeah, you use concrete for it's compressive qualities, not for it's endurance to a quick heavy blow, that's what you'd use metal for.
@AshenTechDotCom2 жыл бұрын
some of those old German air defense towers took amazing poundings and didnt break down like you would expect, genuinely crazy strong, a buddies company has been trying for years to get the govt to let them buy one and re-open it, and outfit it as both office space and a museum space as well, nobody involved is a nazi, but a bunch of structural engineers who would love to give it a once over from the inside out... so many old structures built so much better then today... its astounding honestly.
@thesickboi15672 жыл бұрын
something to think about concrete as well is that it hardens over time, so if you would hop into a time machine and compare modern concrete thats been hardened for over 100 years (impossible I know) it would blow the old concrete completely out of the water
@Critical-Thinker8952 жыл бұрын
Remember, concrete continues to cure for about 100 years.
@axelboltz30772 жыл бұрын
"Blauer Beton" is a name for the concrete used in WW2 by the germans for building bunkers. It has a bigger part of slag sand which causes the concrete to turn blue while hardening. Makes it brittle, but stronger. The brittle-part you counter with enough steel reinforcement. Made such by myself, not on purpose, some years ago while renovatig my house. Had to remove parts of it again and a master mason, who 'helped me' told me what i did there.
@JinWoo_0082 жыл бұрын
Old sledge hammer was made trough a lot of "Tempering" to make it durable, even swords are made through this process. blacksmith are really amazing.
@aekajimasala58792 жыл бұрын
They still can make strong equipments, but that way it will not break and people will not buy new things because old things will last long and businesses would go bankrupt. So, you have to make things which break in 2-3years
@KiranKhan-kz2dp2 жыл бұрын
I AM VERY SICK I WILL DIE IF I DONT GET TREATMENT IN TIME I AM UNABLE TO TREAT MYSELF IN MY COUNTRY AS I AM NOT SAFE HERE I LIVE IN PAKISTAN PLEASE MAKE IT VIRAL HELP SUPPORT AS SOON AS U CAN I AM NOT DECIEVING NOR LIEING
@dexxon96862 жыл бұрын
@@KiranKhan-kz2dp Nani ?
@KiranKhan-kz2dp2 жыл бұрын
@@dexxon9686 what Do u mean
@zerry61842 жыл бұрын
@@KiranKhan-kz2dp you have to do it on your side
@TheGXDivider4 ай бұрын
This is what the founding fathers meant with freedom of press.
@W2ATL2 ай бұрын
Booo!😅😅
@lagflag2 ай бұрын
😂😂😂
@DJJ8110 ай бұрын
Damn man, this stuff is great, have you considered using different background music? Maybe it’s just me, but that stuff makes anything near unwatchable. And it’s just not the same without sounds
@Swordisk2 жыл бұрын
The old one is probably cast iron steel made to last forever, while the modern one is more steel graphite which far more brittle, but cheaper to make
@ToXic03212 жыл бұрын
I would argue, as I think that the old hammer might be forged and that’s why it is so strong
@goodcitizen480402 жыл бұрын
Cast is garbage forge steels have better strength...
@zweilee85142 жыл бұрын
@@goodcitizen48040 Cast (crucible) steel and cast iron are completely different lmao. The steel is first casted and the forged, while you wouldn't even see cast iron due to its brittleness and microporosity.
@zweilee85142 жыл бұрын
@Jason Nass Blacksmith the fuck are you on about? I was correcting the guy saying that cast steel is weaker because crucible steel is first casted and then forged. And they were most likely using A36 mild steel that wasn't strain hardened or heat treated, and your point is?
@ToXic03212 жыл бұрын
@Jason Nass Blacksmith no shit. Nobody’s talking about the fact that the old one is made properly just because it’s old. We’re just saying that cast iron (from which the new one was made) is weaker than forged iron. And if you know anything about steel it should be obvious that you have to harden and then anneal the tool in such a way to get the right amount of hardness and brittleness you want
@grimmdanny2 жыл бұрын
Now I fully understand the meaning of "they don't make them like they used to."
@robertnoble75542 жыл бұрын
Imagine if the Era of the samurai, swords happened today, I wonder how fight would have happened.
@you30392 жыл бұрын
My cousin name is poppy
@you30392 жыл бұрын
Oooo
@you30392 жыл бұрын
This is not a good video
@monkebox34362 жыл бұрын
rust is trust my friend
@singingwolf3929 Жыл бұрын
I hope that old sledge got itself a new handle. It deserves a little pampering.
@justanotherbrian2 ай бұрын
Dope ass offset sledge you got there now.....
@thereturningshadow2 жыл бұрын
This is a perfect example of the term, "They don't make things like they used to."
@xHICKORYx2 жыл бұрын
Of course they also used to make a lot of things with asbestos as well...
@alexanderschulz50882 жыл бұрын
You can still get high quality Handmade Tools today. Never buy cheap China Tools is the Lesson to learn here.
@Pradeep-ix6dj2 жыл бұрын
Made in China for you 🤣
@jkam25242 жыл бұрын
Or, the older tools are just overbuilt. How many times will an axe need to be put under that pressure to do its job?
@FrikInCasualMode2 жыл бұрын
Yes. Different times - different approach. Older items were made to last, because cost and effort needed to make them was much higher. A blacksmith could make maybe two hundreds axe heads per year? Probably less, if we are realistic. In the same time modern factory can churn out several thousands axes in the same time.
@SK-nd8cu2 жыл бұрын
Hydraulic press: I’ll SMUSH YOU!!! Old axe: ima ruin this mans whole entire career
@Brisingaro2 жыл бұрын
Nokia phones: you and me both
@lollol-my6te2 жыл бұрын
Yeeeeeeeeeeeeeep
@Rakhi-02 жыл бұрын
@@Brisingaro lol
@endeckerBM8 ай бұрын
Does metal get hot when it gets crushed and distorted by that thing? Did that Chinese hammer get hot when it got distorted by the press, or did it stay the same temp?
@moxnix9 ай бұрын
I went to a couple of hardware stores, ACE and others (even Lowes) to purchase an AX. Each one I looked at the handels was made in the USA and the heads were either made in Mexico or China. . I ended up purchasing a USA handle and found a good old USA AX head at a Flea Market.
@robertjohnston72563 ай бұрын
No one cares
@user-um2oo9rf8g2 жыл бұрын
Спасибо! Лаконично,ёмко и наглядно! Сразу видно весь не прогресс, а регресс современной цивилизации.
@vitorf23032 жыл бұрын
Regressão na tua cabeça, deve ser mais um dos que falam que carros antigos são melhores pq não amassavam como os de hoje, daí não sabe nem o motivo disso
@someonesomewhere11002 жыл бұрын
I think they meant the quality control of a lot of things. Not that back then everything was 100% Gucci and today is trash lol. But its true, the quality of a lot of stuff has gone down with modern manufacturing. But at the gain of things being more widely available to the masses. It's both a win and a lose.
@user-zw6fn5fy6b2 жыл бұрын
это не регресс а намеренное ухудшение качества для того что бы люди постоянно покупали вышедшее из строя , все просто мы производим вы покупаете у производителя есть постоянный рынок сбыта и прибыль из которой и платится зарплата рабочим которые и покупают потом не очень качественный товар . а что бы вы понимали в чем собственно дело в 1900 году население планеты было около 1.6 миллиарда сейчас около 8ми. то есть в пять раз больше а промышленный потенциал за это время вырос в десятки раз и вот именно по этому тогда качество и долговечность были на первом месте а сейчас для того что бы обеспечивать всех работой , пожалуй намеренно занижается качество .
@Eaglesky672 жыл бұрын
@@user-zw6fn5fy6b У старой кувалды,закалка скорее всего полная,по объёму,а у более современной калится только 20 мм бойка.Говорю как человек,который изготавливает такие кувалды.
@kingclan0072 жыл бұрын
This is why, old is gold. I still have my grandparent harmer which is still stronger than any harmer available in the market.
@belzebub23522 жыл бұрын
i am nigga harmer
@Flopah2 жыл бұрын
@@belzebub2352 you go buddy
@mhangomasuzyo51848 ай бұрын
How old was the modern cement block. How long was it cured before compressing?
@vachilles452110 ай бұрын
Old > New. Congratz Grandpapa..you won this time
@aschoolpencil64132 жыл бұрын
The sledgehammer is a great representation of, “they just don’t make em like how they used to”
@ProtoPropski2 жыл бұрын
Yeah one looked Cast IRON, the other Chinese Cast Alluminum
@shadowcween78902 жыл бұрын
You can still buy an iron sledgehammer. The difference is that the newer one is a discount hammer
@sirblank23842 жыл бұрын
And the old axe was literally made to work not look pretty it broke before it bent
@Stickmister3602 жыл бұрын
The new was probably casted in mass production out of cast iron. The old was definitely forged by hand and yeah they definitely don’t make them like they used to.
@plantymcplantface71822 жыл бұрын
@@Stickmister360 Things just arent built to last anymore, sooner they break the more you gotta buy :/
@danc74122 жыл бұрын
I was definitely expecting that. We make half assed modern versions of everything we used to make that were and still are useful.
@Super-wk6jx2 жыл бұрын
Just to Save a buck, use of Cheap alloys
@drillbitist2 жыл бұрын
we
@Heartless44-_-2 жыл бұрын
@@Super-wk6jx ok if your a mechanic for the love of safety quit your job you suck at it!
@TheValiantLion2 жыл бұрын
Do you need a sledge to resist 50 tons of force? Cause I don’t think most people do….
@kalebpiper81072 жыл бұрын
@@TheValiantLion no, but one that can is less likely to deform as quickly as one that can't.
@silvanusasher4462 ай бұрын
I am genuinely impressed by the old steel. That ax head could be resharpened and used for something else. And that hammer? *chefs kiss* Thor would be proud
@MegaBumblebee6662 ай бұрын
I'd like to see how a proper modern hammer would hold up. Not whatever shit China makes them from.
@Youre_Right Жыл бұрын
I do a lot of tree work and log splitting. I have an old 6 lbs maul I got from my dad. I have an 8 lbs. maul I bought recently. The older maul is much better. I think the major difference is speed. I can swing the 6 lb maul much faster therefore the kinetic energy impacting the log is higher. Although I will say the shock in my hands is much higher from the older maul when it doesn’t split as opposed to the newer one. It bounces more. Still I love my 6 lb old school maul.
@alexsandrkerensky74572 жыл бұрын
“Do not repeat at home” So how many of us have hydraulic presses at home 🤣
@Tedkelvin2 жыл бұрын
Yeah a Hydraulic jack upside down is a press.
@rinadych2 жыл бұрын
@@Tedkelvin 60 tons hydraulic jack? )) Да у каждого в кладовой лежит!
@Jessamer2 жыл бұрын
Norm Abrams probably does..
@DM-os2sd2 жыл бұрын
Se tevese podia fazer
@MrLookatmyhat2 жыл бұрын
Yeah... I mean, who would have one of those? (sweats nervously)
@SatisfyingRestorations2 жыл бұрын
And this is why we restore things. Old, quality items are irreplaceable.
@jimmyz96662 ай бұрын
That first block of concrete looked like it hadn’t even cured yet
@overcomingthat27283 ай бұрын
The old axe going, "you can break me but you can't make me bend." Then destroys the set.
@dirtbike_cowboy2 жыл бұрын
This brings “Sure don’t make em like they used to” to a new level
@cajohnson12342 жыл бұрын
You can see that modern materials are designed to be more ductile than older materials. The one positive aspect to this is that before the modern items fail, they tend to deform first. This’ll give you a chance to remedy the situation before something drastic happens.
@Spartan3222 жыл бұрын
It also reduces the forces transferred to your body when you hit a hard surface.
@MBergyman2 жыл бұрын
It may just be that the my are cheaper to produce. You provide an interesting point, but we do not know without talking to the companies who designed those products the specific reasons why.
@johnqpublic40122 жыл бұрын
@@MBergyman The general metallurgical differences between the materials hold true independent of the manufacturer's intent.
@SlashsBluesBall2 жыл бұрын
it also may be that some alloys tend to get harder when they age and therefore become more fragile
@fragglepoop7185 Жыл бұрын
🐮💩 old sledge was made from a tool steel new one cheap steel 🤷♀️ if you’ve never owned a decent hammer you’d never know , not that you can’t get good new stuff you just have to buy from a decent tool maker.. estwing etc …
@xilijetgames Жыл бұрын
🔝Very interesting video🔝
@LEXUZDIEZ7 ай бұрын
Ornn is loking and is happy with the coldfield hammer working better xD
@merlebyu12 жыл бұрын
The "modern concrete" looked just like a sand mixture with no aggregate. Of course it will crush easy.
@karatehit2 жыл бұрын
the ''modern'' concrete was still wet. also it take like 3 years for concrete to harden fully, but it never stops hardening really.
@benholler13892 жыл бұрын
There is absolutely modern concrete that would be every bit as strong as the old stuff. It all depends what is speced.
@KalijahAnderson2 жыл бұрын
Difference between 'make it last as long as possible' and modern day 'sell as many as possible'.
@thomaswijaya14192 жыл бұрын
I agree, only 1 but unique than many but fragile
@jk716872 жыл бұрын
They picked the cheapest possible new hammer. A majority of new products will last longer, and do more for less money. You can get a high quality 18V brushless for a couple hundred bucks that will last thousands of hours. The hand tools are more comfortable and efficient then they ever have been.
@mshigaev15642 жыл бұрын
Гениально!👏
@MyCatDog872 жыл бұрын
Exactly! 👍
@matthewhollingshead86189 ай бұрын
All this proves is that, either through necessity or innovation, things change for better or worse.
@Enk649 ай бұрын
That axe fled for its life.
@robromeo94862 жыл бұрын
It's a question of steel type and work hardening. It's possible they used mild or mid carbon steel for the modern hammer, but even if both were made of appropriate steels, the extensive use of the older one would make it a structurally harder hammer. It would even make it more likely to fracture rather than deform if it did meet catastrophic pressures. If you want to use old tools like this. Make sure to grind off mushroomed edges. They have a habit of flying off and through whatever clothing you have on.
@AriesSupertramp2 жыл бұрын
"They have a habit of flying off and through whatever clothing you have on" this. I am almost certain that there are regulations about this.
@candidato2520022 жыл бұрын
Ou seja, o material de hoje é uma porcaria.
@dperea2 жыл бұрын
I thought almost the same thing, the old hammer may be made of Hadfield steel or simply hardened by deformation, the new hammer: 1. it may not be the same steel or 2. being a similar material it has not started its hardening process due to to use.
@woodysire13742 жыл бұрын
Or it could be that the sidewalls around the handle are thicker on the older one compared to the new one which allows the new one to start to cave when you put it under stress that the tool isn’t meant to be under. But your probably the smartest guy in the room so I’m sure you’d know better then everyone else who design and made the hammer.