I Bought An Abandoned IROC Z Camaro That Sat For 27 Years In A Storage Unit! Here's How Much!

Get $67 off the Fanttik EVO300 by clicking this Amazon link amzn.to/36mjevH then click the $50 coupon and then use the LSCEVO300 coupon code at checkout out.
Get $44 off the Fanttik EVO100 by clicking this Amazon link amzn.to/3LGYcI7 then click the $20 coupon and then use the LSCEVO100 coupon code at check out!
In this video, I bought an 80's IROC Camaro that was abandoned for 27 years in a storage unit! Is this car a time capsule or total junk? Here's everything I found wrong with it and some live negotiating for the final sale price! Enjoy!
LSC Merch & New Signature series shirts! www.legitstreetcars.com/ LEGIT1O For 10% Off!
Get 25% off all Amsoil products including their synthetic engine oil! legitoil.myamsoil.com/
Scroll down the page to "preferred customer" and click "learn more" to get the deal!
Use Coupon Code LEGIT For 10% off Sonic Tools! Combine Code With Other Sales! bit.ly/3iNDtGU
Try a sample tool kit for only $60! bit.ly/3CSBqcB
Everything car-related I recommend from Amazon! amzn.to/2k606u1
Get behind the scenes and sneak peek videos on the LSC Facebook page! / legitstreetcars
Instagram @LegitStreetCars bit.ly/2GCFq3X

[@LegitStreetCars]

What would you do with this car? Get $67 off the Fanttik EVO300 by clicking this Amazon link amzn.to/36mjevH then click the $50 coupon and then use the LSCEVO300 coupon code at checkout out. Get $44 off the Fanttik EVO100 by clicking this Amazon link amzn.to/3LGYcI7 then click the $20 coupon and then use the LSCEVO100 coupon code at check out!

[@Thirdiii2002]

I had an 89 and 91 RS. Still have the Chervolet service manual for 1991. It's huge.

[@realdeathpony]

I would part it out for sure. After having fun with it that is. We both know putting 12K into it will not be worth it in the long run.

[@ThePs3ownsss]

LS swap! You know you wanna! I know I wanna see it

[@marcuscoquer5958]

In England an 80's car in that condition would be considered pretty good. I would personally go for a recommission of it and have an usable Iroc. Just do what is necessary to get it through the next year or two.

[@whollymindless]

You end to stop shopping north of georgia.

[@valengreymoon5623]

When they say "rust free", it means the rust is free.

[@mentals555]

lol I'm taking that

[@lawnmowerdude]

Or that there’s no rust in the photos.

[@valengreymoon5623]

@@lawnmowerdude LOL....Rust-free photos. Possible loophole there.

[@madrew2003]

The 120 speedo means it's doesn't have a performance setup. Not F41. Not G65. Rear drums. No fog lights. Pretty much a stripper IROC-Z.

[@valengreymoon5623]

@@madrew2003 I always thought the IROC was the top-of-the-line, which meant the "big" engine under the hood. Too bad the 350 had no manual trans option, since it couldn't handle the power, so it was only available on the 305.

[@99Vood99]

LSC, you need to get those wheel dollies for your shop. That way if a car won't move just jack it up and place it on them so you can slide the vehicle to where you want it to go.

[@stuartd9741]

Sometimes hitting the center of the wheel with a heavy hammer& a block of wood shocks the brakes loose. Works better on drum than discs brakes.

[@pri0r_t0_a_weekago...fukwi48]

@@stuartd9741 MUCH better with drums… never seen it work otherwise lol

[@topfell8277]

Have the dollies

[@theglitch99]

Had the same thought!!🎉

[@Duckswag87]

Such a gorgeous car man, what a shame that it’s so rusted out. I would love to see it restored

[@rustbucketauto2328]

Looks pretty good for 1500 bucks

[@1marcelfilms]

I would rather see it just fixed up and daily driven

[@MadNlGER]

It’s honestly not that bad. I’m not sure but it seems like he just likes buying shit and isn’t a real restoration body guy.

[@papag5433]

Its not worth a restoration. They were crap cars new. I had an 86 z28 and doors rusted out in less then a year and paint was peeling and electrical system what screwed. They had to buy it back under lemon law in just under a year.

[@papag5433]

@@rustbucketauto2328 1500 is great. Just fix the major stuff and blast the underbody for rust and get it treated and drive it till the wheels fall off. they have no real value they made a millon of those irocs.

[@Karmaikaze]

I love the way the IROC Camaro looks, it just screams 80's/90'a and thats why I love it.

[@scottbutts6703]

$1500 seems right to me, honestly. Props to the seller for being so level-headed

[@bendino9016]

fair price, its a rust bucket.

[@bishoos123]

@@bendino9016 its not a rust bucket but it will need some metal work at least so more money to fix.

[@Mortalomena]

@@bishoos123 that thing is so rusted it will be parted out like he said in the video

[@vapecatt]

@@Mortalomena you must be from the south

[@ericwoody22]

He tried to rip him Scott Butts, lawyers are not to be trusted

[@Korruptionen]

I'm surprised you haven't secured a trailer with a winch. As many cars as you buy, it's about time. Glad the guy was cool enough to work with you on price. 1500 was a good deal for him.

[@mtizzy4772]

Or wheel dollies..

[@mexicanspec]

I don't think he has a place to put a full time trailer right now.

[@questioner1596]

If I lived within an hour drive of a u-haul place, I would probably not own a car trailer. A two day rental is cheaper than one tire, you don't need to repaint or replace deck boards, and you won't have a spouse complain about how it looks in the yard.

[@wchcamaro]

I love this car when I came out of high school in 87 A friend of my parents bought him a brand-new black and gold T top Have been in love with those for years

[@koopaGG]

I had the same thing happen to me when I was looking for another 3rd gen. The pictures and everything sounded great and when I got there, it was almost like a different car. This guy seemed really nice though so that helps. The guy I was dealing with who just completely changed his story after I drove 300 miles to go see it. I hope it works out! Not enough videos out there on these cars.

[@maxnex7676]

Dave seems a nice enough guy and great to see that he was open to negotiation.

[@blockpartyvintage1568]

Its always the boomers who think you can get a paint job in 2020 for a thousand bucks lol

[@derekgardin1512]

@@Youcallthesebagels_ meh I can get a really good paint job done for $2000. Then again I know a guy who has been painting cars professionally for 29 years. He re painted my Acura ITR just a few weeks ago. Just waiting on the warmer weather. Need the snow to melt and the first couple rainfalls of the season to happen so it can wash all the salt off the roads. I don't want to take any chances with this thing. I coated the entire underside with FluidFilm after we replaced all the mechanical/all new brake and fuel lines etc. It looks great now, identical to the one Speed Academy just got.

[@1ronco]

Dave says he's a lawyer.... I'd say "shyster lawyer"

[@derekgardin1512]

@@1ronco he doesn't look like the brightest bulb in the tree lol. Although he scored huge buying that unit for 900 bucks. $1500 for the car, likely get $1000 for the Honda Interceptor (1000cc?) All the vintage, BNIB Hotwheels, Star Trek stuff. Literally thousands of $$ it looks like by the time he sells it all. Would live to score a deal like that

[@TwentytenS4B8]

If someone tells me that the car is rust free and I show up and find a rust hole in the door big enough to stuff my fist through, I'm walking away.

[@archdavis6942]

I would do a video or two on getting it running, test drive and then a series of videos on how to part out a car. You have the space to dismantle the care and store the parts in your space. Love your channel!

[@charlesking1244]

Keep Up The Amazing Work, Great Video!!

[@tyronebuggums2954]

A 80's kid dream car!!!

[@henriquelobianco6536]

I’d say either sell it to someone willing to do a full on restoration (the clean title and the story behind it may be an incentive) or part it out and even get some profit out off of it. It’s sad to see it go out this way but at least it’ll help others by keeping them on the road.

[@chrisstedman4039]

People who mislead buyers about the condition of a car to a guy traveling long distance to come buy a car are selfish pricks. The kind of work that car requires to be nice is not something that would ever make sense. It has to be a labor of love type thing

[@MrDillon2029]

Dude you were meant to be on a tv show or KZbin all along! Your personality is sooo great and you’re such a nice guy and a peoples person. Keep up the AWESOME work my guy! You’re motivating a lot of ppl to get out and work on their cars and try to do some diy and I know you think you know you are, but you really probably don’t realize how many. Keep it up it man!

[@martinwarner1178]

Freezing weather, cold hands trying to load a rusty wreck...been there, but, totally admire your fortitude. Love the channel. Peace be unto you.

[@vernhoke7730]

I've owned 6 Camaros over the years. My first was a '74 LT. It had a 350, 2 bbl and a turbo 350 auto. The next were a pair of '67s, an RS and a base model. Both needed work and I never got around to doing it. My first new Camaro was an '84 Z28, I ordered it new in '83. It had the 5.0 H.O., 5 speed, 4 wheel discs. The next was an '85 IROC Z, ordered in February 1985. It was a 5.0 TPI, auto, t-top, 4 wheel disc car. I bought an '87 5.7 TPI, 4 wheel disc car in '06 as a 2nd car.

[@Dr.TJ_Eckleburg]

This was also my very first car! '86 IROC, black with t-tops and the 305 TPI. Got it when I turned 17, after saving for about a year. My parents matched whatever I could put down, and I think the car was $2500. Honestly it's a miracle I made it out of my teens alive. I'm really glad to see these cars getting attention again, I loved that thing.

[@kevinoertl774]

Part it out

[@dannysdailys]

The only attention it's getting is debating about what junk yard to take it to.

[@theplayernkc]

305 automatic, no T-Tops and horrible rust. I would have walked away from it.

[@TakuroSpirit77]

It's a parts car unless someone really wants a project. $1500 is about right for what's good on it.

[@mexicanspec]

You don't have You Tube and sponsors to help pay for the work.

[@stuartd9741]

Derek from vice grip garage buys car alot worse than this and drives them 100s of miles...

[@theplayernkc]

@@mexicanspec I don't need youtube money or sponsors to know I would not want to touch that pos.

[@theplayernkc]

@@stuartd9741 You're an idiot if you believe any stories from that channel. They are all staged, none of it is real.

[@kolby4694]

Love the video! I just picked up an 88 iroc convertible w/47k original miles. It had been sitting in a storage unit for about 5 years and I legit only paid $1k for it. I put in a new battery and drove it home. I didn't realize just how lucky I was until watching this video. Not an ounce of rust or dings whatsoever. Only thing wrong with it is a little bit of paint fade.

[@cart-wheels]

As the owner of a Thirdgen I can tell you it's a love hate relationship with rust. Personally I'd love to have the car because mine is a t-top and I'm sick when it comes to buying rusty cars. Most people run from them but I don't. I know, I need help. I think it'd be cool to fix it up and go full resto-mod/street mod. No need to repair it back to stock. Weld in sheet metal patches, swap exterior panels, get your favorite playlist burned to CD or tape, and cruise in style. That car would look epically awesome sitting in a photo with mine. From classic rock to Vanilla Ice, we could grill out and do karaoke on KZbin live! Boom! Sounds like a plan. Call me! 🤣😂

[@rhiantaylor3446]

A lot of what we could see on the sheet metal underneath was an underseal-like covering flaking off. There was a lot of rust for sure but I think there may yet be a useful thickness of steel left. We can always hope...

[@bigospig]

$1,500 is only about $1,400 too much. Please stop buying cars in the rust belt. Spend the time and gas money to find something with NO RUST. :)

[@stuartd9741]

The car was described as rust free. Alex didn't know until he inspected the car....

[@matthewwilkinson6447]

Good luck man can't wait to see what you do

[@sardopassalacqua1767]

LSC, love what you do. I can’t get enough…you do it well always looking to see what your going to do next.

[@bmaldonado41]

Have the underbody sandblasted first because then you know for sure how bad it truly is. Auto metal direct has a boatload of pannels for most cars. Especially those widely sold.

[@chrisosiecki8050]

AMD has no parts for this car. Maybe a hood and a hood scoop. Need a bunch more than that for the resurection.

[@jamescook7036]

Classic industries is the go to on these cars. They have quarter panels for under $150

[@tonkaranger1091]

The power trunk was a good idea from a engineering angle. The amount of air it caputures and pushes forward when slammed was hard on passengers. The soft touch allowed for slow depressure, no hurt ears.

[@Chris_A_]

Um, crack open a window before slamming shut the ?trunk?

[@jonathanlawson4667]

Mine is still working great to this day but mine isn't stock I have a N/A 383 550hp planted in it with a 200 shot I'm close to 800hp but my camaro is a one owner full interior street car still

[@Guillotines_For_Globalists]

@@Chris_A_ No need I thought all cars had vents inside for closing doors and trunks.

[@Chris_A_]

@@Guillotines_For_Globalists Classic vehicles do not have relief vents. Try gently closing a door on an air-cooled VW with door seals functioning as intended by the factory. It will not shut without nearly slamming the door shut.

[@Guillotines_For_Globalists]

@@Chris_A_ This Camaro is from the 1980s unlike a Beetle from the 1960s.

[@robertmaybeth3434]

Great vid as usual... that idea for a man cave in the truck is a great one, I'd say don't wait do it sooner/better! Project cars will come and go, but rolling man cave is forever

[@TheHangarmenBand]

Had an 87 Iroc ttop 350 police auction drug runner car. So much fun back in the 90s. Great in a straight line. really fast. sucked in corners, spun with no warning several times. Still miss it. Was a great looking car. Good luck!!!

[@madrew2003]

The key is the RPO list. I bought an 88 IROC brand new. LB9, 5spd, G65, hardtop with 4 wheel disc brakes and the 16 inch wheels. There is a huge difference having a 3.45 posi rear.

[@aaronbritt2025]

Nice. I had an IROC 305 Tpi stick shift. The wheels say "front" and "rear" because they have different offsets. The only problem with buying an old 3rd gen now is parts availability. Yes, there's a ton of aftermarket reproduction parts, but there's still some stuff that's gonna be unobtanium.

[@Avi8tor857]

Not really that hard, everything powertrain is available. About 60% of the interior is reproduced. Its not a 69 Camaro that you can build new from a catalog. There is alot of small companies that make parts for them, GM authorized reproduction for the major wear items are starting to show up. Now with the current supply chain issues some things take forever to get to you but that is true for all cars.

[@joakimsoderberg8046]

Yes and alot of the aftermarket reproduction parts are poor quality. I think fenders, doors and floor panels is available but not rocker panels or trunk panels.

[@ksilva808]

@@joakimsoderberg8046 I have 8 3rd gens & parts are available if you know where to go.

[@MrReese]

That power trunk latch is so cool tho :D. The whole video was very interesting and educational, you guys have a lot of ideas how to move that Camaro :D. Moving cars around that cannot be driven is an absolute nightmare, I had this happen with my 4th Gen that has a defective fuel pump, I was going crazy.

[@dericksmith2339]

Hey guy im from south africa qualified mechanin since 1999 and i love your videos im addicted. Recently let go from my job things not good in my country im about to forfeit payments on my 2007 ford ranger dont know what im gonna do for wheels but im gonna do my best to kerp following your channel you inspire me

[@elliottbickle6117]

That’s a far cry from driving the CL65 through several states in the freezing cold, with potential disaster looming at every mile marker, but it was fun to see an 80s IROC. I always dreamed of adding the IROC wheels and ground effects for my 87, but a blown head gasket that I never got around to led to it sitting outside in Wisconsin for too long, resulting in worse rust in all the same areas yours has on the exterior.

[@jeffreysmith3704]

What a super guy Dave is to not play hard ball with you on the price after having you drive so far to pick it up. That was a fair price with all of the unknowns and body rust. Can't wait to see how it runs and drives!

[@goodnuffmatt]

It's not THAT bad. I've saved far worse. I live in Western PA and on a quiet night you can hear the cars rust here. I have an '87 V6 T-top Camaro that was actually the exact car I had in high school that I accidentally found again a year and a half ago. It had a (rather poor) repaint at some point that I think may have slowed down the tin worm a bit. It has some floor issues like yours, but definitely salvageable. The tired (but will still smoke the right rear tire off) 2.8 leaks so much oil (also probably helped it from rusting more) that it leaves a smoke screen and a trail wherever it goes, so I'm about to swap it out for a 305 TPI (because it was cheap). SAVE THAT IROC! Such cool cars. Great video!

[@Ifyoucantdodgeitramit]

New subscriber here. Kinda random, but I love that you separate all your videos into playlists and don't just randomly throw them about your channel. I for one appreciate that a ton. My second dream car of all time is a 3rd gen Camaro. My first dream car is a late 60s early 70s Chevelle SS.

[@fisherbruce13]

I don't know if you read every comment however, I hope you keep these kind of projects going. I really enjoy seeing these older vehicles that have been abandoned restored as efficiently as possible.

[@Cultureshockcrew]

Look up vice grip garage

[@jorgeirizarry5971]

He use to read and reply to a lot of the comments. Now days he is way to busy. I remember getting a reply to my comments when the channel was starting.

[@rodneyking4183]

I hope you read the comments, there are a bunch of awesome tips. Wheel dollies would be good, a couple of guys explained the latch and the wheel offsets. You should totally restore this car and take us through everything. I have seen Emelia Hartford completely rebuild cars. She put a Honda engine into a Prius. If she can do it, you of course could do it. Get some sheet metal and cut out the pieces to redo the floor and all the other areas. We will watch it. Do it DO IT Do it

[@waynemangan9925]

Born in 80, in 1987 a friends dad in my cul de sac was a Chevy salesman and for a little while had an IROC just like this one that I got to ride in. I thought this was such a cool color. He also drove a burgundy over tan for a while. I think that's my favorite, or black over silver. I also still have that police k-5 blazer

[@charlesking1244]

Man That Third Gen Iroc-Z Brings Back Memories, Such A Cool Car For The Time, I So Remember Those Being Brand New, One Of My First Jobs At A Local Chevrolet Dealership, I Worked As A Lot Porter, Detail, Under Coating Guy, While Still In School, Back Then.. LoL

[@nickk4010]

I love those cars. My first car was a 87 trans am firebird 5 speed with t tops, in 2003 mind you. Besides running out of gas on the regular, and the t-tops leaving a pond in the back seat in the winter, some amazing memories. I always loved the irocs with its very similar body style

[@GlycerinZ]

My 3rd car was a '94 Camaro V6 5MT and it was alright, 4th car was a '97 Trans Am WS6 M6 an I loved it

[@JasonFrankenstein]

My first car was an 86 IROC. I miss it dearly. To answer some things, I heard the electric pull down on the hatch was to keep people from slamming it which can cause the glass to break. The front and rear wheels have different offsets. Shame it's so rusty! ETA: I think you should do a mechanical restoration (the bare minimum), interior detail, do some sad burnouts with that weak drivetrain and sell it!

[@pto44]

I had an '85 without the power pull down. If the doors were closed and windows up there was too much air pressure in the cabin when the hatch was closed, so it wouldn't latch half of the time without slamming it. The pull down was added to address this issue.

[@Beer_Dad1975]

Weirdly my 2008 Lexus has the same kind of electric pull down thing, and its an ordinary steel lid. No idea why they thought it was necessary.

[@JDJD-mw9rr]

I had a 86 IROC too. 5sp with the carbed 305 lol. All the 350s had the auto

[@Anthony-rv3hr]

@@JDJD-mw9rr The 5.0 5spd IROCs were quick. I used to smoke 305/350 fbodies with my 5.0 mustang back then but somehow that gave me a run for my money. 85 TPI cars were quicker than the later ones as well.

[@JasonFrankenstein]

@@Anthony-rv3hr My 86 was a 305 TPI. It never felt fast but I ate fox bodies for breakfast! I had a timing chain go bad and I first noticed when I lost a street race to a Taurus SHO (embarrassing). The next day the entire chain went. They used a nylon/aluminum cam gear on those 305s. The nylon was totally gone when I opened it up. Crossed my fingers that the pickup screen wouldn't get plugged up and went on with a new chain set.

[@13slot28]

Growing up my father had a 1989 Iroc-Z.... Absolutely love them!

[@rustythebailiff9785]

I graduated high school in 1990, I wanted of these so bad. I came back from the in 1993, and almost bought one similar to this one. It had 3 options, the 350, the t-tops, and the upgraded factory radio. I drove it and it rode like a tank. Wide turn radius, stiff suspension, and wasn’t as powerful as I thought it would be. It was good deal price wise- I just didn’t have fun driving it. Good luck with yours, I’m eager to see how it turns out.

[@rhull3939]

My first car was an 85 V6. I toasted the engine in a year and a half because I could have sworn I was a formula 1 driver. Funny story in that car. I raced a kid I knew down our local quarter mile spot who had a RS with a 305. I was sure I was gonna lose, but I didn't. Got him by a fender. We pulled over and he wanted to go again because "he had his headers shut off." There was clearly something wrong with that kid and that car.

[@CrashRacknShoot]

Ah yes, the closed header mod.

[@rhull3939]

@@CrashRacknShoot haha. Yeah, that kid was a dope. We all just laughed and went on our way.

[@sdz9850]

I was super excited to see you got an iroc-z...until I saw it.

[@wesbolton4179]

The mid 80's IROC Z28 Camaro is by far my personal favorite car. Never got to own one but knew a few that did. I really like the body lines and the body style. Sure hope you can restore this one back to its formal glory without sinking too much into it. This one looks straight. However, the rusting is a huge issue.

[@peterchesher5215]

I have that exact Chevy Matchbox car here in the UK. Got it when I was a kid probably circa 1987 too. Only got the box of cars down from the loft recently for my girls to play with. As for the car, I would part it out, but I'd like to see a video of getting the engine running and seeing if any of that vintage security stuff is still working.... And just as I type the above you say your gonna get the engine running. Excellent

[@backyardbangers1012]

Dave is cool. Like his laugh and sense of humour. The world needs alot more of it. Good vid mate

[@DocMackGarage]

I didn't think much of Dave at first when I heard about the rust, till he started talking. What a nice guy . I can say he genuinely did not know the rust was there .

[@dieterlange7581]

Yea but he was a little weird

[@offermangarage]

So excited to watch this series! I just bought an 87 iroc to rebuild. I’m in Joliet too.

[@stevenl8687]

Shout out from Canada awesome car man I had a 1987 IROC with 5 speed manual with the 305 TPI never should of sold it! Thank you for sharing!

[@joakimsoderberg8046]

I love your videos. Never use the rocker panels to lift a 3rd gen Camaro/Firebird. Use the frame instead. The front fenders lower mounting brackets are always smashed because people put the floor jack there. I see you did that in the video so take a look at those brackets.....I bet those are bent and smashed up to the floor I believe the complete floor and structure is the same on Camaro and Firebird. They went down the same assembly line when they where built. Save it if you can. These 80s classics are rare these days! I love my 88 Gta.

[@Avi8tor857]

Had a tire shop lift on the fender mounts on my 89 once... Guy was fired on the spot. I never got it right until I took off the front clip for my LS swap and was able to fix it to my liking.

[@michaelcsete9201]

He should know this he’s owned a GTA in the past but hope he reads your comment before picking up another thirdgen. Imagine if this car actually was in great shape, and on the second day he owned it completely mangled the pinch welds :(

[@vincentfisher4748]

Totally agree with the lift points warning ⚠️ .

[@Kal0ut]

I've been looking for videos showing people working on the original motor of these cars, and it seems like nowadays everyone just rips the engine out in favor of an LS. Watching a mechanical restoration would make me, and I'm assuming many others, incredibly happy!

[@ElYorch77]

Yes it would. My.trans am runs hot everyone says they are notorious for fan temperature sensor problems

[@carlyeremian]

Oh man!!! That sucks, was really hoping to see you restore this. But am looking forward to see you getting the motor running.

[@JimmyProductions]

Currently restoring a Camaro RS ‘87 with a friend of mine. We have never worked on a car and hope to learn and get experience while having fun!

[@texasoilman9446]

The IROC was the car I loved back in the 80’s along with the Grand National…..gonna be a big project, but would love to see it running and driving.

[@tony64t]

After the 1997 C43 AMG that you briefly owned, this is the second car you've featured that I also own. Except that my 87 Camaro irocZ has the 5.7 engine with T-tops. GM offered the power trunk option due to fear of the heavy weight of the glass rear hatch breaking upon closing.

[@pri0r_t0_a_weekago...fukwi48]

I figured that when he lifted the hood(I forgot how heavy those trunks are

[@TonyRule]

19:24 Dude! I need that Interceptor. That's a bike from my youth. My cousin had the tariff-dodging 700cc version. I loved that colour scheme and the tan textured engine sidecovers.

[@jimciao6896]

Cool ride. My father bought an 88 Iroc Z convertible back in 88. Still has it. Has around 14,000 original miles.

[@clubsport9334]

I lived in the States for 4 years. Imported my 97 RS Camaro back to Australia. Currently planning a full rebuild including V8 6 speed and IRS conversion. Wish I had your knowledge and experience to guide the build!

[@charlietimes2770]

You can do it my friend, have faith in yourself.

[@mwhitelaw8569]

Dude They got bolt in rears for those Like a 9 inch ford diff. Much easier than making it an IRS

[@jimcatanzaro7808]

How do you feel about how Australian government took away your guns and rights? I always wanted to live there not anymore

[@rickymac54321]

@@jimcatanzaro7808 Why do Americans worship guns? That’s a better question. From a tyrannical government perhaps? Well, the government is far better equipped than any American. So why the obsession?

[@sav22rem22]

@@mwhitelaw8569 As good as a ford 9 inch is, IRS is superior for anything other than going in a straight line

[@loganowen6957]

Alex, you should have grabbed that VFR Interceptor! Seriously fun bikes!

[@OG_Jack]

Love your enthusiasm!

[@anthonyblacker8471]

Man on man.. it's really tough living in the salt areas.. I'm in NJ and we have it almost as bad here (not like ChicagoLand but still salt all winter) I lived in FL and MS for a few years and it was AMAZING every car i looked at or bought every time i went under with a hammer to tap the frame they were amazing, like new.. crazy.. oh well

[@racerboy2212]

Saddened this car ended up being sooooooo cancerous!! I know you’ll assess it and make the right decision as to what to do with it, even as a parts car. Looking forward to seeing the series you create out of it!!

[@vangestelwijnen]

I just love this vid. It has it all: hope, trust, disbelief, reality check.

[@martinkk2943]

hope, (t)rust, disbelief, reality check.

[@morganwin350]

So glad that every car person no matter their age will still buy matchbox and hotwheels. Also as an ML owner it was nice to see that getting some camera time again as well as doing some work as the MLs love to work hard.

[@alanahlagrow9716]

I work for a Uhaul just a little advice for low sitting cars grab you some wood to put at the bottom of the ramps and under the front tires to keep it from rubbing the bumper.. just think it might be easier then the jack.. love the videos man and love this car. My dream car is a 1967 Shelby Gt 500..

[@wiktorgliniecki7024]

You really need to get yourself your own trailer Alex 💪

[@Casey388]

Dave is definitely a stand up guy. Even though this Camaro has it's issues, it seems like a great project for the channel.

[@TwentytenS4B8]

Not really, since a stand up guy wouldn't advertise a car as rust free and conveniently miss a huge rust hole in the door, rotten out fenders, and cancer also on the quarter panels. No way he missed all that. You'd have to be Ray Charles blind to not see it. I wouldn't have negotiated. It would have went something like this: "Thank you for your time, but as of now, I'm not interested sorry." and walked away.

[@stuartd9741]

@@TwentytenS4B8 Athough I agree with you. Maybe the seller wasn't a "car guy" just didn't know what the car was worth? Maybe thought what rust there was wasn't a big deal..? ... We're all looking at this as car guys knowing what is & isn't good Not everyone is that (car) savvy?

[@ksilva808]

@@TwentytenS4B8 that's no where near rusted out. I've worked on 3rd gens 25+ yrs & have 8 currently. All running & has rust hear & there. Unless it's kept in a controlled environment they will rust. My friends 2020 ranger has rust & it's always washed

[@CJColvin]

@@TwentytenS4B8 I agree.

[@jeffrey4547]

i use to have a iroc rechipped it and it came alive way better then i thought it would had a lot of fun in that car black and gold did not even have a ding in it when i sold it drove it for 5 years and made good money off it . next i am building a 79 z28 rs t top have 90% of the parts for it with 2 extra z28's hard tops for parts . got a stroked 454 with a 02xx trans for it got everything for free so far even got new custom interior for it out of one of the hard tops . all i need is paint supplies and a few nick nacks for it also have a t-10 4 speed with new fly wheel and 12 inch clutch for the 454

[@sharpdistance7535]

I had a '90 IROC Z (the last year for the IROC trim) with the 5.7L (350CI). It was the first great car I ever owned. had it for 9 years. Traded it in for a new 4th Gen '99 Camaro SS. Good luck with your project.

[@bringsometools5159]

Living in the rust belt (Minnesota) gives you a slightly different perspective on the pervasiveness of the decay. It is in every single area of the vehicle. Rot is hard to overcome when it is this deep. Get it running and part it out. It would be hard to watch a ton of money get sunk into this particular example of an IROC.

[@HeROsiNhEaVeN]

Alex, this is small fries for you bro….you could run circles around this project….👍🏻💪🏻🇺🇸

[@theplayernkc]

It appears you didn't watch the video. The rust on the underside made this car junk. Alex isn't going the mess with that mess. It will never be drivable again unless the complete underside was replace.

[@TwentytenS4B8]

In order to do a quality resto you first need good bones. This car doesn't even have the skeleton.

[@jeremysmith876]

I love the 3rd gen IROCs but man you got your hands full with this one. Excited for the next video though!

[@beyedubya7777]

"Rust, free." 😆 The "Matchbox" cars and "Food Fighter" figurines made me realize how old I am, LOL. I had that "Federal Express" truck and a bunch of others.

[@joppaman21040]

Rust bucket City! Hopefully this video(s) recoups the $1500. I still can’t believe the Subaru guy refused and never took possession of that Outback.

[@TwentytenS4B8]

I can, he's a very humble guy.

[@blaakrose]

After you got burned on the rusted out trans-am, I totally agree with you for not wanting to give more than $1500. You definitely need the rolling dollys. It would have made moving this car a lot easier.

[@pri0r_t0_a_weekago...fukwi48]

Go jacks (from your neighborhood friendly tow truck driver lol) Those things are GOLD especially in these situations

[@KableGuyCGY]

Gatta move the fleet around... I like it... Very stradman-esk...keep up the videos man!

[@Robsav-yx6vi]

Alex the great ! Kindest guy on KZbin ! Great Score buddy. Love those cars ! Going to BE fun ..

[@Desertfox92308]

What a score for Dave on that storage unit!👍🔥 I was really hoping to see more video on that Honda Interceptor! I think it might have been a 700/750?

[@gs1100ed]

Maybe a 500? They made 1000 too.

[@daviddavison5113]

VRF700 F I know even less about motorcycles than cars! Dave

[@Bill_Hartnett]

@@gs1100ed It's a 700/750. It's a VFR, probably 1986. The 500's were the older VF style.

[@gs1100ed]

@@Bill_Hartnett Thanks!

[@stuartd9741]

Yes was hoping for a close up of the bike....

[@stevesamuel6603]

I would definitely restore this beats Alex , come on man you got this , you haven't done a full restoration series yet so why not this ,as you even got it for 1500$ are you kidding me and clean title !!!! mannn !!!! I'm all in for this thing these are so getting special as each day passes , I'm in mad love with these F-body Gm's super cool and unique !!! please Alex save this baby !!!! STAY SAFE , TC and God bless !!!!

[@JDJD-mw9rr]

That thing needs like 8k in metal work alone, not sure if it's really worth it

[@Thanos.m]

To me it did not seem too bad underneath it obviously needs some work but it didn't seem to be rotten through

[@shouldabeenaborted]

I agree needs to be a different color anyway.

[@TwentytenS4B8]

From what I've seen, it's going to cost 8 to 9K to replace the rotted out floor pans. And another 2 to 3K just to get it mechanically sound with today's prices. Fuel tank will need dropped and cleaned and fuel pump replaced to get rid of varnish., All the brake lines are heavily rusted and would need to be replaced for safety sake., We don't know if the engine is any good or the transmission for that matter., All the brakes need done rotors, calipers, pads, hoses on the front, wheel cylinders, brake hardware and shoes on the back. And that's just to get it drivable safely. It's a good parts car and that's it.

[@stuartd9741]

I didn't think the rust was that bad tbh. Yes it's rusty. As the others have said. A resto only worth it if the end justifies the means. This iroc maybe too far gone. I'm not sure Alex would have the time to do a full on resto...

[@destruxandexploze2552]

It’s pretty funny, I got my 1988 Chevy Corvette, March 8th after sitting for a while, it wasn’t as good as the pictures either (but they’re made of fiberglass and have a covered Galvanized Steel Chassis so no rust) but I also used a handheld tire inflator to get it unstuck from the snow and ice. And it had a mouse at some point in it.

[@cndctrdjful]

I just picked one up myself. Can't wait to see what you do with it

[@lukebird6412]

The power latch may have been a safety feature because of the size of the rear window. If you slam it hard it can create a lot of pressure. I had a car a while back that the front windows went down slightly because of the size of the boot lid. 👍👍

[@envisionelectronics]

Cars have pressure relief vents for this.

[@lukebird6412]

@@envisionelectronics I’m no mechanic by any means but Alex said that feature was removed on later models, maybe that’s when vents were added.

[@matthewhegarty729]

The rear windows were also prone to shattering when being closed.

[@johnpisciotto7115]

They did blow out when first made.

[@mexicanspec]

@@envisionelectronics Have you ever closed the hatch on one of these. He/she is right, that is what it was for.

[@CarFul]

This one definitely is going to be a money pit! I’m very curious about the condition of the motor, but when it is any good, I would sell the car with a little profit! Loved the video as always, Alex! 👍😀👏🏻👏🏻👏🏻

[@Kevin19700]

A definite money pit. Just part it out!

[@cbr1thou]

Nobody cares about that engine but you! Gtfo here

[@chyldematias217]

BEAUTIFUL 😍 paint.. I Purchased an 87 Iroc last year 20th anniversary convertible for $700 same color but my paint is oxidized. You can easily get back the $1500 by selling the nose and rad support fender interior wheels and so much more.. keep engine and trans if good and search for a good clean Roller.

[@theglitch99]

K5 blazers/ GMC JIMMY'S are my all time favorite truck!! Had 2. Hope to get another one some day!!!

[@___Reaper___]

I love that factory color with the beige interior. I have the same, just from '85, originally with LG4+700R4, but swapped to 350TPI + T5 WC. The hard part is to get replacement for the interior plastic pieces, especially here in Hungary :) Can't wait to see this beauty running again :)

[@kmas8229]

Hey there, my fellow european 3rd-gen owner. Hawks motorsport has alot of stuff for the interior. I have ordered a few bits and pieces from there. They LOVE 3rd gens :)

[@___Reaper___]

@@kmas8229 Hello there for you too :) Yes I know Hawks and yes, they have mostly everything, but there are exceptions, like tan front seatbelt receiver, they only have the sleeves.

[@kmas8229]

@@___Reaper___ Oh damn. You could send them an e-mail? I had difficulties finding saddle-tan seatbelts, but they were very helpful. :) They found some and sent them to me for a pretty penny.

[@___Reaper___]

@@kmas8229 Good idea, thanks, I'll try that. Somehow never thought I can send an email to them :D

[@kmas8229]

@@___Reaper___ Good stuff! I hope you'll find what you need my dude! :)

[@marktemplin1159]

I had a 71 RS split bumper, 350 z28 cam Holly 650 spread bore and,,, an 80 3.8 liter,,, at the same time,, you can imagine which a loved and which was a mom and pop got me to work and back,,,,, this was in the early 90's

[@krisw8597]

My fav Iroc color combo, my buddy had one just like it with T Tops back in high school with the 350… would love to find one like that.

[@dnutts4070]

Would love to see a full restoration. Go for it👍🏽

[@The_journeyy]

Its crazy to think some people literally have gold like this acquiring dust in their storage unit 😳 🔥

[@CK-br9mn]

Rather sitting in storage than somewhere on someones property exposed to the elements rusting away.

[@ForsakenSteel]

I gave a little less for the one I'm building on my channel. However I don't think you gave too much. Can't wait to see more on your IROC-Z. Good luck with your project.

[@jarheadscott]

Had the EXACT same issue with a U-Haul trailer once. After having multiple semi trucks flashing their lights at 5:30am, I could finally see sparks.....

[@billiam247]

I would have killed for a restomod 3rd gen, but I'm happy to have a near-perfect 4th gen now. I'd really like to see a video on the differences from generation to generation, and for the salt to go away so I can bring mine out of hibernation.

[@billiam247]

Alex, I'm local if you need/want the car for a video.

[@timothygeiger8271]

I have an 89 that's in great condition. Mine has T-tops, the tuned port 305, 5 speed manual transmission, & runs great. Mine is completely rust free. I went through my teenage years when these IROC's first came out, i fell in love with this bodystyle back in those days. I always wanted one. I found mine quite some time ago & it's not going anywhere!!

[@87-GTA]

I currently own an 87’ GTA with a factory 5speed, took me a looonng time to find a rust free one, with the 5speed and t tops, not a powerhouse by any means but I love driving it.

[@lorddoggo4353]

Not only is it the midwest but its also a third gen, great combo if you love rust! Thankfully my 84 bird doesnt have any.