I Built my Dream Watch from AliExpress Parts

LET'S BUILD A WATCH USING CHEAP ALIEXPRESS PARTS! But, make sure you AVOID the big mistake I made in this video.
TOOLS -
Plastic Tweezers - s.click.aliexpress.com/e/_De3...
Finger Cots - s.click.aliexpress.com/e/_DeX...
Dust Puffer - s.click.aliexpress.com/e/_DDN...
Watchmaking Cushion - s.click.aliexpress.com/e/_Dls...
Hand Pressers - s.click.aliexpress.com/e/_DFl...
Caseback Tool - s.click.aliexpress.com/e/_DBW...
Hand Removal - s.click.aliexpress.com/e/_Dkm...
Gasket Greaser - s.click.aliexpress.com/e/_Ddv...
Threadlocker - s.click.aliexpress.com/e/_DDE...
WATCH PARTS -
NH72 Movement - s.click.aliexpress.com/e/_DFn...
Movement Spacer - s.click.aliexpress.com/e/_DCn...
Steel Case - s.click.aliexpress.com/e/_DdG...
Dial Ring - s.click.aliexpress.com/e/_Ddc...
Hands - s.click.aliexpress.com/e/_DFk...
Strap - s.click.aliexpress.com/e/_DcQ...
Top Tier Ticker Watch Shop - toptierticker.com/
Follow my Instagram - / toptierticker
Want more Top Tier Ticker? Here are some of my BEST videos
Watches That SUCK To Own - • 10 Amazing Watches Tha...
Affordable Watches Even Snobs Don't Hate - • 10 Budget Watches Even...
Building The Ultimate Budget Watch Collection - • Building The ULTIMATE ...
Finally Revealing My Entire Watch Collection - • My Entire Affordable W...
Get 20% Off All Spinnaker Watches Using Code 'TTT20' - www.spinnaker-watches.com/Top...
Top 20 Best Watches On Jomashop - www.jdoqocy.com/click-10097292...
My Top Amazon Recommendations -
Best Watch Box Under $100 - amzn.to/40SLluz
Best Watch Under $250 - amzn.to/3CB05n1
The Ultimate Beater Watch - amzn.to/3WbxlIA
Business Enquiries - [e-mail]
Disclaimer - Some of these links may be affiliate links. Meaning that you pay no extra for the product but I get paid a small fee for directing you to it. I only ever link products that I feel are good quality and that are worth your time.

[@jaredstephenson6468]

Ha. I love in every single "first time" video the builder blames the secondhand as faulty. I think EVERYBODY's first has no secondhand. You really need a loupe or magnifier to get it right.

[@Katya5cat]

My first one was problematic also. The dial was the first problem. Although the specs said 28.5 - 29.7, the 28.5 was so close to too small. There was a ring around the dial where it showed the need for a bigger dial. I had the dial installed and ready for the hands. I should have checked more thoroughly, but I didn't. It turned out they were for a 35mm dial. The hour hand looked great, but then I found that the minute hand was too long after installation, and the second hand could never work as is. The next set of hands were appropriately sized and fit well. The second hand was very difficult to get in place. I had been drinking coffee and couldn't line it up. The next morning, before coffee, I was able to install it. I must say that I could not see the pin where it went without a microscope. The best purchase that I've made for this hobby was the scope.

[@XRAWatches]

.... and you will find its the watch you wear the most from this day forward.

[@markthomas741]

You'll find the builds to be addictive.. I did! 😃

[@ptzish]

The little metal "dress up" stickers that go over the automatic winding counterweight really do make a huge difference in the back of the watch. They're tough to get precisely aligned but if you get it right they look really good. If you want to shell out the $25 for a custom replacement counterweight - it's way easier to install and makes the back look even better.

[@Danny_Casolaro]

just a bit of advice on the second hand. I've built 3 ali mods so far and also struggled with the second hand. tweezers were a nightmare to use. i found rodico is really the key to lining up the hole on the second hand to the pin on the movement. also don't force it. line it up and when it starts ticking then you can press it. best of luck cant wait to see the diver and the v2 of this one

[@BURP39R]

I wish you'd used a lamp to light this build. But still, nice job.

[@metrev]

I don't have a loop but I use my phone camera to zoom in makes it easier to see to get that seconds hand on .

[@mariomanzo4116]

I recommend getting some Rodico. It’s a type of putty that’s very helpful when assembling watches. I use it clean dust and debris as well as to put the hand on.

[@user-cf4oi2gl7z]

good stuff.

[@LiamMcAleer]

Having built a custom watch a few years ago I have to say you've done a fantastic job of explaining it clearly for anyone to follow. It's surprising how many how to videos miss enough detail that it's difficult to know what you can buy. I didn't know about the commonality between those movements. I'll have to make another now!

[@Miina-y6m]

Picked up a

[@HansAndrist]

Wow - kudos. Have been thinking about doing this and you've inspired me to take the plunge!

[@maxinahunt8652]

Great video! Really interesting concept which you did so well to emulate. Nice second choices for hands too. I like the second set of that group - more modern. Looking forward to part 2!

[@davewelsby9737]

Excellent video and build.

[@christopherhilton2539]

Great video. I have been wanting to build my own watch for a while now and I think you just gave me the confidence I needed to go for it. I think you watch came out good. 👍

[@spex7503]

Cracking video. I've never really been interested in mods but a ground-up build looks tempting.

[@Spectrecontrol]

The timing of this video is perfect, I have just been looking at doing something like this and now i feel much more confident that I can actually pull it off

[@stilianivanov3377]

If the seconds hand is hard to install just take a sewing needle and tap it in gently to open up the hole a little.

[@moneymikz]

Very informative thx mate