I Made Her a Surf Board

  Рет қаралды 1,636

JDub Hannah

JDub Hannah

Күн бұрын

Пікірлер: 12
@passartko
@passartko Жыл бұрын
Amazing❣️
@jrat3449
@jrat3449 Жыл бұрын
Last board before the move! Good luck man! Just thinking about moving all that stuff gives me a headache!
@JDubHannah
@JDubHannah Жыл бұрын
Definitely a huge hassle cleaning everything up and getting packed, had about a metric ton do dust hiding in the corners of the garage!
@JDubHannah
@JDubHannah Жыл бұрын
Hey huge shoutout to Passartko! Thanks a bunch for the ¥!! For longboard single fins one of the big considerations when placing a fin box is how thick the tail of the board is. You need to place the box far enough forward that you have enough space to route in the fin box! I placed this one 6 inches from the tail right down the stringer, if the board was any thinner I would have had to bump forward and place the trailing edge of the fin box starting at 8 inches! Hope this helps!
@passartko
@passartko Жыл бұрын
Thank you very much! I will try to make my surfboard!
@passartko
@passartko Жыл бұрын
Amazing!❣️I'm your big fan. I want to know how to fins placement❣️
@ZacharyBrown
@ZacharyBrown Жыл бұрын
Soo good! That board looks so clean. Can’t wait to see the new shop!
@JDubHannah
@JDubHannah Жыл бұрын
New shop coming in hot!
@Battsboards
@Battsboards Жыл бұрын
So when you were doing the hotcoat or gloss coat, I saw that you used UV resin, was the mixture just uv resin and the catalyst? or did you have to add hardner. Im a beginner and trying to learn more about it. thanks. and did you have to put a uv light on it or could you just let it dry without the uv light.
@JDubHannah
@JDubHannah Жыл бұрын
Hey great question, I pretty much only buy UV resin these days, when it’s sunny you just pop it in the sun and it cures super fast. When it’s not sunny, when I’m working at night etc… I still use UV resin and just add catalyst (which is hardener) and it will kick in 15 min and harden. UV resin is normal resin just with an additive catalyst that activates with UV light, no problem to use normal catalyst when you need it 🙌. Hope this helps @battsboards
@anthonygeraghty7315
@anthonygeraghty7315 Жыл бұрын
I have seen a technique. Paint the lap with wax in styrene, before the hot coat. Apparently it hides the lap line. Ever heard of this? Thanks. Enjoy your vids. ✌️
@JDubHannah
@JDubHannah Жыл бұрын
Very interesting, I’ll have to order some and give her a try, I like to see lap lines most of the time but for some circumstances it would be super handy to conceal them. Thanks for sharing!
Shaping and Glassing a Surfboard at Home
13:25
JDub Hannah
Рет қаралды 27 М.
Surfboard Shaping & Glassing [Longboard]
14:24
Bendheim Boards
Рет қаралды 38 М.
The ULTIMATE SURFBOARD build. Start to finish/Time lapse
17:26
Shrednaught
Рет қаралды 55 М.
Every Basic Tool You Need to Shape a Surfboard [At HOME]
10:26
JDub Hannah
Рет қаралды 23 М.
How to Shape a Surfboard
36:34
Swell Set
Рет қаралды 4,1 М.
Surfboard Shaping & Glassing [High-Performance Shortboard]
12:20
Bendheim Boards
Рет қаралды 2,7 МЛН
Resin pin lines on a surfboard : how to get perfect pin lines
25:32
Fiberglass Florida
Рет қаралды 51 М.
Glassing a Surfboard : Surfboard Lamination
25:48
Fiberglass Florida
Рет қаралды 203 М.
Surfboard Glassing [High-Performance Shortboard]
10:53
Bendheim Boards
Рет қаралды 31 М.
fcsinstall.wmv
8:22
shaperFR
Рет қаралды 5 М.
[Shaping + Glassing] Single Fin Surfboard
41:06
Cameron Sardo
Рет қаралды 88 М.