I successfully started a homemade W3 engine

I successfully started a homemade W3 engine

[@delmarrathbone7092]

This guys abilities are off the charts. Amazing work.

[@Spikejones5001]

Worth the wait. Need to see this running in a bike next. You're an insiration to us all.

[@BluntEversmoke]

Let's hope it will be a longitudinal installation. And that he names the bike The Crown 😂

[@BusstterNutt]

Thank you for all the hard work in making these excellent videos.

[@AridersLifeYT]

mark my words, this video will gain millions upon millions of views

[@yaseenamin8056]

Marked.

[@zulkifli182]

marsed

[@Sludge73]

Looks like 25% of a radial. Very cool! Thanks for sharing.

[@spenny3403]

Hell yeah buddy! I love every one of your Frankenstein builds, so amazing! It's incredible to me how you can end up with something so precision made and functional! This one has such a different sound, I love it! Can't wait to see what you end up putting this in!

[@linustechtipsindianhindi5143]

A radial engine of aircraft is must be made by you. You make it possible.

[@thestreets5206]

Sounds amazing... can't wait yo hear it with a 3 into 1 exhaust 👍👍💪💪

[@MotoEnz]

The big 4 should hire this guy... awesome work brother 🤙

[@gonfreecss9856]

yamaha honda kawasaki suzuki yes

[@seaweedsmoking714]

This guy should hire the big 4

[@kennethabanid1954]

This channel deserves more subscription. ❤

[@rev_artworks]

still waiting for inline4 crossplane like R1M 🤗

[@naitranaitra8196]

maybe it's asking too much, but i'd love to see a Le Dan v5

[@martin-vv9lf]

@@naitranaitra8196 me too, le dan honda rc211v v5 clone would win my heart.

[@nikorox123]

I think he already did it

[@thegameeeeeee8666]

I marvel at your engineering! Loved seeing the ignition system in a bit more detail and cannot express my excitment at the sound at the end! A true \|/ engine!

[@DimPot]

You are the Allen Millyard of Vietnam !!!!! 😄😄😄

[@moto8444]

Allen Millyard is Le Dan of England.

[@guessnot8015]

Le dan no counter​@@moto8444

[@ragnarokpriest6700]

​@@moto8444 it is Allen Millyard of Vietnam why ? Because i dont in le Dan channel car engine or aircraft engine in a motorcycle Allen is best of the best Le Dan is on way to be like him.

[@Vismotrix-m]

I died trying to read those ​@@ragnarokpriest6700

[@quanglongcth]

Original engine is easier. Allen Millyard is different from Le Dan

[@fredrikvanlienden6749]

Nice job Mr Dan!

[@milcemejia1816]

Hey Le dan soy fans tuyo Eres un maestro Quiero aprender a modificar motores como usted😊

[@juliandavidvelezg3596]

Le Dan, lo admiro por su gran talento, pero el vídeo completo de este proyecto...., me gusta ver todo el proceso que hace para hacer estas obras de ingeniería mecánica.

[@cuongreddog]

kzbin.info/www/bejne/fZywdqmDZZJ9d7csi=X86HZvbIMPssMI6Q

[@cyclerider5652]

Best work I've ever seen.

[@raymondsmith6504]

That thing sounds great.

[@DatMai-b6z]

Chờ mãi mới thấy bạn cho máy nổ thật tuyệt vời mong bạn có nhiều sáng tạo mới nha

[@Hydrogenblonde]

Amazing work! Amazing talent! Please make a twin cylinder Gx200 Honda stationary engine.

[@jonathanmagaiver]

Assistindo aqui do Brasil. Sucesso no canal😊😊😊

[@stevenpleasant5834]

Hi, Le Dan very cool I like how you built this motor I wish I had on like it now very nice.

[@joeyymit]

This is a sick build. Amazing work!

[@halitosmanyurdakul6266]

It has a very cool and rich sound, I can't even imagine how good it will be once the exhaust is gone.

[@nantatech3563]

you are the best innovation in the world

[@steveshoemaker6347]

Le Dan you are AMAZING.....Thanks very much 👍👍👍👍 Shoe🇺🇸

[@fadhlirasyid6953]

I can't wait to see this engine on a motorcycle

[@screwsnutsandbolts]

Superb job ! 👍

[@phamduyofficial7680]

Lúc nào a cũng đẳng cấp❤❤❤ dù e k biết gì về động cơ cũng như cơ khí, nhưng vẫn xem a để ủng hộ tài năng của a, xem a từ lúc kênh cũ vài chục ngàn sub, đến khi a mất kênh tạo kênh mới qua kênh mới xem ủng hộ tiếp . giờ kênh đaã gần 500k sub r chúc mừng a, chúc kênh a nhanh đạt 1tr sub nek.

[@AlexanderMartinez-df9wc]

Buen día, saludos desde Valencia Venezuela 🇻🇪 , tremendo ingenio! 😊

[@johnpartridge7623]

That has a nice throaty growl to it, I'd like to see you convert a 500cc Single into a V Twin 🤞 good job Dan 👍

[@calocbong7151]

chời ơi. hóng chờ hàng ngày luôn anh ơi. em fan cứng nhe kkk 💪💪💪

[@onegesper]

Karya yang sangat luar biasa.. Sehat selalu bro..

[@MB031]

Unbelievable ! So this is 3 times 50ccm ? That's some serious power now on small bike. Excellent skills you got !

[@anhquoc6873]

its 110cc for each cylinder not 50cc, basically the engine is 330cc

[@наобъездной]

Скорее всего 100% 375сс.​@@anhquoc6873

[@giwrgossofos145]

very nice job you did my friend, well done😎😉😍

[@tangomm]

You never cease to amaze me, try an aero engine for micro lights.

[@aserta]

Would be nice to give it a 3 into 1 exhaust that has a collector, to a larger pipe rather than a merge (and all the same pipe).

[@agustinjs9406]

Go , make your own

[@DelpazDelprado]

I think that will be his next move bro😅, he just only tested the engine first if it is well functioning, and bravo! Because he did it well. Let just all watch out for the next episode😊

[@PureEnigma]

looks and sounds awesome, well done!!!

[@josevillalba368]

Saludos desde Uruguay que pedazo de vestía la verdad un lujo 👌👌👌

[@170Hendrik]

Weer prachtig werk. Mechanische kunst. 👍

[@bsimpson6204]

The British motorcycle industry failed in the late 60's because they couldn't design a modern engine, they couldn’t even split the cases horizontally.

[@RB87NL]

If you are referring to the BSA rocket and Triumph triple you are not entirely correct. The British were perfectly capable of designing and producing modern updated engines. But management of these companies made woeful decisions. Just like the British car industry really.

[@terrybull3798]

Came to post exact comment as @RB87NL. Nothing wrong with the engineers abilities, just bad management and government.

[@EbenBransome]

Their problem was that managements would not pay for machinery capable of making horizontal split cases. In Japan the Ministry of Transport was full of engineers and basically told the manufacturers what to do. In this country the DTI was full of arts graduates who had been to the right Public Schools, and were hopeless. Benn tried to fix it and the arts graduates defeated him: Heseltine tried to do the same thing with the same result. The failure was not of the industry per se but of the Public School system and the way its OBN ran (and still runs) the country. You don't think Johnson would have been PM had he not been to Eton?

[@phuochainguyen784]

Quá đỉnh luôn L..D ơi !! 3 nắp tròn khắc chữ Phúc _ Lộc _ Thọ nữa là mỉ mãn luôn

[@atheplummer]

Your videos showed up in my feed, because I was looking into putting a chainsaw engine on a bicycle. A friend of mine has this really cool low rider 'chopper' style bicycle that would be perfect for a engine like a V twin Harley Davidson engine. I'm thinking 1/4 scale Evolution engine, But there's no one out there building 1/4 scale stuff, only ultra miniature engines for big $$$ with zero practical purpose. Then I saw your video on making a 2-stroke boxer engine... That's it! Make a V twin 'flathead' style engine, but make it 2 stroke. It could share the same carb, as long as you have reed blocks on each cylinder, and a sealing ring on the crank between the rods. I'm thinking something like a Evinrude 2 cyl crankshaft, with the crank case split & offset 45 degrees & rewelded. Then use air cooled jugs to top it off. Just an idea to get your brain cooking on a new future project.

[@cathy5722]

There's another guy on you tube that built a 3 cylinder radial but without the transmission. Le Dan makes engines for motorcycles like few others. This engine will most likely have a lot of torque.

[@robertmichael8036]

That's awesome brother cool man 👍 good to see

[@karlalton3170]

Một bản dựng tuyệt vời khác của Dan, nhưng liệu nó có vừa với Xe đạp không? 😂😂😎😎🤘🤘

[@ahmadrasyid3366]

Very good way you do things keep it up mate

[@MachineDS]

Your work is amazing❤

[@JulianMejia-y9e]

Increíble felicitaciones un verdadero maestro de la fabricación e y ingeniería

[@andyc750]

absolutely brilliant, technically very difficult, all it needs now is a custom frame to make it perfect

[@wakou_zen]

日本のファンです🗾 心から応援してます📣

[@gertkristensen6451]

super good job... I made a home build diesel 1 cyl for small boat 😀😀😀made off tractor parts 😊

[@Spark-Hole]

Salute! from Thailand

[@panosgamithis8868]

I've been waiting for this one...!!! 😊

[@freddy7700]

Absolutely fantastic!

[@phongmaikhoa-xs4ws]

Dự án tuyệt vời… chờ đợi hoàn thiện công trình di động của bro 🤙

[@pentakiller6662]

máy anh làm đỉnh mà thấy nó cũng đơn giản thiệt ha. em cũng đang lên ý tưởng cho chiếc Exciter VVA lên máy V2 đây. mong là sẽ có thành quả giống anh

[@hoailinhvn123]

người VN mình quá giỏi, mới xe thánh chế mr hồ, giờ tới bạn này

[@stubby7934]

Nice work, as usual.

[@antoineastruc239]

Very cool! Congratulation!

[@EbenBransome]

This is an astonishing bit of engineering - in fact it's the engineering, the calculations and design work, that you can't see in the video that are the biggest achievement of the lot. There is another design of W triple not based on aircraft practice. In this case two cylinders are at 120 degrees and share a crankpin, and the third cylinder is between them and has a single crankpin (with counterweight) at 180 degrees to the other one. The downside is the cylinders are not in a single plane, the middle cylinder is offset. The upside is even firing every 240 degrees and much better balance.

[@nhutmanh6465]

Này chế khung, làm thành chiếc xe chạy thì khối anh em làm xe kiếm anh hợp tác luôn á. Em ở An Giang lên SG làm xe, phục chế xe, độ xe classic cũng mê cách anh làm lắm

[@samhendra7460]

Finally done, glad to see it❤🎉

[@hoangmanhthu81]

Hóng vd test trên xe quá a ơi 😂

[@ricksuarez9653]

Deym.......!!! Le Deym!!! The best ever!!!!❤❤❤

[@Nico-ds9nz]

I Love your Videos man... Your the best enginebuilder... There als is an other Guy named ,,Lets learn Something,, but He builds not the Same quality as you. For example He dials the Cam over a Marker with a pancil, Cuts rockerams and weld them fre Hand together so the Timing ist crap... Yoh make that was better... Love your Videos 😄

[@thanhvo8548]

Thợ thợ sữa xe đỉnh của Việt Nam

[@ppoundtown7424]

Needs a bit more cylinder pressure if you ask me....either way this is sick as fuck! I Wonder how many hours he has into Just the engineering of the cam chain & tensioners? Hats off to you LA DAN your the man

[@longnguyenngoc3967]

Quá đỉnh, xưởng mình ở tỉnh nào vậy bạn, mình xem video của bạn mà cũng muốn lên 2 xilanh cái suzuki mình đang đi quá. Bạn có nhận chế máy cho a e đam mê không bạn?

[@christophermoore5821]

Got some skills brother !!!

[@Tal5258]

Well done Dan this is a complicated build fantastic. How about builiding a square 4 like an Ariel Square 4 1940's that would be a challenge

[@donbrashsux]

Incredible Talented Le Dan .. 👌👌

[@jamest.5001]

Connecting all three of the intake adapters together. With a 12,15, possibly 20 mm tube can improve low rpm performance. And can possibly be well Worth looking into..

[@HockingVideos]

I wish you'd sell those engines I'd love to stick one in my race mower😁

[@ThomasDoubting5]

Sounds amazing.

[@phuochainguyen784]

Sau này cố gắng làm luôn động cơ RẼ QUẠT bạn ơi..! còn 2 máy nữa thôi....Cố lên..

[@DucLe-mg5bp]

E làm động cơ này rất good... có cái này e chế hộp số rời giống xe harley

[@MegaOwel]

What a genius absolutely amazing 🤩

[@schnizzle_uk]

wow! Genius engineering skills

[@mainierepair]

Anh chế máy phát cỏ hai nòng đi a❤

[@ahongmarlim5265]

Hi.. Le Dan.. you must try building overhead rotary valve four stroke.. have nice day🙏🏼

[@hendrypardede8134]

Hands up maaaaan..!!!!!! U R AWESOME

[@N.A.T2468]

Very good bro❤❤❤❤

[@aliimron7050]

Sangat luar biasa sekali jadi motivasi belajar

[@DOCTRJ]

Genius! Man!💯😁🤠👍🤘🍻🥃🐶🦞🦜🌳🎸🎹🌞🏞️🌄🌌

[@nickmassey9104]

Another great engine

[@wilburbum]

que laburo hermano te felicito plena admiracion , gracias por compartir , que CV tiene ?

[@doquangtan]

Nổ cực kỳ hay với cách đặt xy lanh kiểu này . Phải nói là quá tuyệt vời.

[@CREPOZOIDES.LE.MORBIDES]

GROS BISOUS BONJOUR DE LA FRANCE BIENVENUE JAIME VOS VIDEO JADORE VOS VIDEO CONTINUER MERCI ET A BIENTOT

[@rinpham8826]

kiến thức và tay nghề của anh phải nói là quá đỉnh....

[@mardinlihakan027]

Basarili bir çalışma.ve tarifsiz mutluluk. Bu motoru bir kadroya takıp gücünü performansını göstermeni isteriz

[@idamsaja5629]

Haloo saya subscriber baru Sangat senang melihat karya anda

[@scottthomas5999]

Don’t use clear hose for oil lines. When the oil gets hot the hose will come off leading to loss of lubrlcation and engine failure. I have seen this happen several times. Good luck. Great engineering. Love the videos.

[@the_hate_inside1085]

Think it is for us to see what is happening.

[@ariefariesta806]

Itu hanya untuk memastikan oil pump berjalan dengan semestinya😊

[@markallenarcano9439]

Present Bro from the Philippines 🙋

[@Herzankerkreuz67]

Amazing skills. That being said, with the alignment of cylinders like this in an air- cooled engine, won't that create thermal issues ?

[@Creationfutures-Oxy]

I hoped, he makes double Opposite Engine, which it have 8 pistons and each liner needed one carburettor with total amount there 4 Liners, its be amazing crafting if he makes. As additional that it need 3 crankshafts to running and syncing each others.

[@jens-eriklangstrand1689]

Marvellous! For the sake of curiosity, what on earth is the sound in the background on your videos? (Jens, blacksmith, Norway :) )

[@MrLukealbanese]

Perfect Mr Dan!!

[@Losermachine35]

Do a three into one exhaust that will help pull exhaust gases from the motor also you should have some tube between manifolds to even out the intake pressures

[@joseammx]

Una pregunta las bielas son de aluminio? no deberían de ser de fierro? Saludos