I turn V-twin Compressor into V-twin engine (Transmission)

[@backwoodsjunkie08]

I am seriously shocked that a car company hasn't picked you up for their chief of engineer position! You should be very proud of the work you done, not many people know how hard it is to build the kind of stuff you build

[@WilliamHollinger2019]

Anyone can get a air compressor and maybe a engine.

[@alberteinstein3078]

I bet plenty of people know how hard it would be me included!

[@rayhanpattuary1870]

hete ginus

[@backwoodsjunkie08]

@@WilliamHollinger2019 lets see your video then. My guess is you've never even operated a metal lathe/mill

[@h4z11s4]

I mean this isnt nothing new. People have fabricating engines from parts easily avabile for ages now. and that camshaft design isnt really the best solution either. There's nothing deal braking or hire worthy here. Just a passionate guy making engines from easily avabile parts.

[@arthursmith5409]

Was waiting on your update of this engine, to make it useful! You , young man, would be one of the people sought after if the world goes crazy and needs to start over. Very smart engineer, you are..

[@meestasqueed5867]

Hell, now that you’ve got a trans, you might as well go all out and stuff this thing into a motorcycle frame. I want to see a full fledged Frankenstein motorcycle.

[@ramslade]

He should be hired in a car company like legit

[@VanTran-ft6pu]

Sau khi được llll liô lio các hl Ii I

[@mcbain3949]

Many people like myself can repair many things mechanical but to actually build engines and make things like you do is an amazing gift , I love your videos , Rock on !

[@monunko8428]

Это фейк, звук наложен, двигатель вращается внешним источником. Вы посмотрите там коленвал просто висит в воздухе при работе. Такого быть не может.

[@ekinlan2717]

Build a bike. Use this engine

[@Arturro941]

yeah :D

[@alfarojoaquin9680]

Yes!!!!!

[@SedYorZ]

Yes

[@igsbs9075]

Yeeessss

[@yottadrive]

The ultimate homemade motorcycle

[@jeremycrochtiere6317]

Just getting better and better with each edition, sounds perfect absolutely incredible.

[@hi8803]

Definitely build a bike using all this, would be dope.

[@davosilins5205]

i wonder ,how far this bike could go? i say 200km :D

[@hafizsgc893]

I wish it can mount at bike and run smoothly

[@hafizsgc893]

I wish it can mount at bike and run smoothly

[@ju5t1n78]

I would like to see how much hp it makes. With it attached to a bike you could dyno it :D

[@ФикратАлиев-ш6у]

@@davosilins5205 й

[@cybaman1]

A real man after my own heart. I really love this type of engineering. Making cool things from junk and then bringing them to life. Once again, the trusty Honda C90 came in valuable...Heads that fitted the stud pattern... I would be happy to have that VEE TWIN "comprengine" as a show price in my home. SUPERB ✨

[@davemiller262]

i love this guys videos. i wonder how much trial and error he edits out. the videos just seem so confident. going by his rate of posting im sure this 17 minute video represents a month or so of work

[@monunko8428]

Это фейк, звук наложен, двигатель вращается внешним источником. Вы посмотрите там коленвал просто висит в воздухе при работе. Такого быть не может.

[@maraksaman]

​@@monunko8428бедолага, посмотри первое видео по этому компрессору и следующее видео после этого, где он едет на мото. С этим мотором. 😂 Понюхай Бориса, подумай над своим поведением🤦🤣

[@NiTecIndustries]

Dude I applaud you for your innovation and creativity! You earned my subscription. This needs to be put on a kart, PERIOD!

[@killerkip1]

Your videos remind me why mechanics used to be called engineers, thanks for the creativity and motivation

[@martymcmannis8662]

Ingenuity at its finest. It's nice to have a lathe. Thanks for the video

[@Lordspaghett]

Currently staring at one of these attached to an airtank in my backyard as I'm watching this...

[@ALittleBitOfGay]

Dave's Custom Crap well why haven't you taken it off said air pump and into your house for the conversion yet? 😉

[@TheRealMMC]

That is totally awesome. The new paint job also looks good. It would be cool to see a bike powered by this creation. Great job!

[@garajedelseba3152]

hey man, i fall in love with your proyects, please use that engine to build a bike, u re a very good engineer, im so proud

[@purnomotvchannel7139]

Orangnya gak banyak omong & karyanya pantas diketahui banyak orang👍👍👍

[@hunmurdgamer6157]

i will love to see this peace of art on a motorcycle

[@bricopartage355]

Me too this enjine de deserve à fram

[@esquinaodacarne3195]

Me too

[@p.wikary9435]

this does not happen because the crankshaft flies around his ears ..............

[@bobkids009]

This is a too complicated engineering job that no ordinary person can handle ....... well done .......I salute his good engineering mindset to conduct such a complicated job all by himself......

[@dapointes641]

You're one of the few genius youtubers who really do what his fans want to see❤

[@apzkhan]

Excellent skill, great work.

[@CJE2007.5]

Great work. Sounds like a HD Sportster gotta love the V Twin sound. Edit: up close sound is a mix between a 2 stroke and a sportster. Definitely neat

[@greasysteve5671]

Sounds more like an Indian than a Harley, to me at least; the 90 degree bank angle is what does it. It still looks right at home hooked up to that gearbox lol.

[@cynthiaayers7696]

Nice job... My husband was doing this stuff using Briggs & Stratton's and automatic Honda 3-speeds 47 years ago.

[@cetate93]

You've given me inspiration for a junk Honda 90 engine that I have laying around if I can't get it up and running again.

[@claytonmontgomery1886]

YOU CAN DOOOOEEEEEEET!

[@เฉลิมชัยดีประเสริฐ]

ช

[@scottcupp8129]

Great video. You're brilliant. By the way the sped up hammer taps always get my funny bone!

[@Andrewstephensonn]

You should build a Diesel engine next

[@WilliamHollinger2019]

It would be same engine diesel only needs compression not sparkplugs

[@maxjohansson3087]

@@WilliamHollinger2019 get out from here, you don't know anything! A diesel engine also needs glowplugs. Stupid😒

[@unknownuser4335]

@@maxjohansson3087 Ehmmm... No dude, glowplugs are just for heat the diesel when the climate is too cold Diesel autoignites at high pressures That's why diesel don't use normal sparkplugs I think the stupid here is you

[@Liqify]

I would like to see how he will construct the high pressure fuel pump for diesel. No sarcasm.

[@onefastslimjim]

I would also wonder about how long the engine would last. Diesels need insane compression ratios to work, like 22:1 or something iirc, which would require a lot of engine bracing as to not blow the head clean off 😅

[@staruch46]

you are a wonderful engineer, what you show deserves great praise. Don't waste your talent. Good luck !!!!!

[@Doppelwhoppermcdonald]

That's very impressive honestly I never could built something like that with such simple tools But the crankshaft of the engine won't last long that's for sure

[@danielfinney4295]

Why wouldn't it? The crankshaft is made to run all day long compressing air

[@h8ascooter]

This is awesome! But I got an idea for you. Convert the "gearbox" into a compressor aswell so that it will act as a supercharger for the v-twin!!!

[@mridulkrishansharma5394]

Or just use a spare compressor for that!😂😂

[@ngatran227]

không sử dụng được chỉ có thí nghiệm thôi

[@outlawamps]

Awesome job my man! I love how you turned common things that were designed for other uses into something really cool for a different end purpose... it sounds really good too!

[@anushkamadusanka322]

Bbvv

[@mamipuku2573]

Berapa CC harga

[@angelgomez965]

I wish I had this skill, I struggle to repair my 200 cc bike this is ridiculously awesome

[@javijimenez9107]

I would like to see you adapt that engine to a vehicle like a motorcycle or an ATV

[@CS_Mango]

I'd go with a kart.

[@SekAustria]

Sounds Like he wants to run! nice bro!

[@robertsadler6160]

M zzz

[@darmohk969]

Buang

[@ashtonrader9217]

À@

[@lisbethsiliezar6376]

@@robertsadler6160 4ffffffffff

[@lisbethsiliezar6376]

@@darmohk969 444

[@glaucialopes2804]

Melhor momento, tão lindo trabalhar com um torno mecânico. *** The best moment!***

[@agroman77]

2.3k ppl that never ever changed their own clutch ... congrats buddy, nice work.

[@diamantegerardo]

You should really build a complete motorcycle for this unique homemade engine, You did very well Also, You can write and perhaps publish papers on SAE, You're a real engineer that deserves to be hired by an automaker like GM, Ford, Isuzu or a motorcycle manufacturer like Honda, Suzuki, Yamaha or Kawasaki For such unique V-twin engine, just go to a chopper type like a Yamaha Virago or Harley Davidson or a Dual Sports like a Suzuki V-Storm or Honda Africa Twin By the way, Replace those plastic high pressure oil lines with metal ones, The engine heat will melt those plastic oil lines in no time and make chain covers for the timing chains and the main chain Your engine is a beauty, You should test it on an dyno and see how much horsepower and torque can make and improve from then Keep that good job

[@Schjoenz]

Sounds like a mini Harley Davidson.. great build! 💪🏻💪🏻

[@abigandikatohjiwa8396]

Love it !!!!. Thank you for answering my questions .

[@szymonszewczyk8225]

This dude is a freaking gasoline powered gearhead genius....two thumbs up👍👍

[@danw1955]

Interesting! I saw you were contemplating a support for the other side of the crankshaft. Of course you'd have to most likely change the rods so that you have removable rod caps, or set it up so you can use a pair of the original roller bearing rods from the bike engine. You'd probably have to go with modified rods with caps though, because of clearance issues. At any rate, a second support would be good in any case, for a little longevity. Also, if you can drive your cams off the second 'engine', it would take the extreme side load off that 'rear' camshaft & cylinder head, and maybe allow you the option of going with a toothed belt drive, rather than chains, and eliminate the need for lubrication of the chains, and associated parts. With those mods, it might actually become reliable enough to put on a small scooter, and ride around a bit! With flat top pistons, I'm guessing the compression is really low, so it probably doesn't have more than a few horsepower at best.😉👍 *EDIT:* Since the second 'engine/trans' already has a built-in oil pump, maybe you could use it to pressurize the cams on the engine, rather than having to drive an oil pump off of the cam chain.😁

[@Md.MinhazurRahman-p6u]

Build a bike. Use this engine.👍👍

[@jammils38]

Dude! You have a great mechanical mind! That is so amazing to me! I love it an looks awesome! 😁

[@FlamingRayz]

Your are the only person in youtube that can do the things you do and I'm so glad that i found your channel

[@6CylAddict]

I know you’d need a different trans setup but this would look dope on a go kart with that exhaust setup, and if you put a tiny turbo that would be craxy

[@andrewbarnard3229]

Yeah no, definitely voting for a bike build. And a road test

[@ollilehtonen6764]

Damn he has a lathe now?? By next month he'll be competing in Moto GP internation championship i bet, Haha. Awesome stuff man. Keep it up!

[@iameatingtrifle]

I am sad now :( I have watched ALL your videos. Pleased to see what you make next. I am very impressed with what you can make with limited equipment, please be carefull & safe. Keep up the great uploads, Thank you.

[@WayneEarls]

The extra noise is coming from the chain that is running on the pulley instead of a sprocket.

[@BM205]

Man you have fabrication skills most of us dream about!

[@MrDKDIY]

Nice Video my Bro Bravo 👏👏👏👍🏻

[@arseniovera9535]

Eres un súper genio mi amigos !!! No puedo dejarte sin ningun agradecimiento por tu trabajo .por ahora te ganas un voto . Y saludos al canal.

[@Sawsquatch]

Can't wait to see this in a frame, and moving under its own power.

[@hidayatdayat3270]

0 0 0

[@FollowMe88]

Second that comment!

[@BigEvy]

Really clever use of the old engine. I would have never thought to do that.

[@conradkenneth5216]

Greetings from the international space station!

[@myanalimbadrilimbadri7076]

Parthaji you're genius, good job keep inventing for man kind

[@daynadodge7488]

Wow a transmission too

[@dreamsonlyownsmakers9376]

Next step... An entire bike/mini bike. Definitely! Good job!

[@kimurajustice]

I would love to see this in a real bike 🤔😍

[@kimpho3308]

0 b 8@

[@sahilsangha9327]

this guy can turn anything to an engine

[@mohamaddentaar9284]

really you are very good in the automotive field, hopefully the knowledge that I learned can be useful, and for yourself, I hope you are happy, healthy always, and facilitated in all matters, good fortune

[@RZVPeter]

Tractors are also good in the automotive field ;)

[@maximozorrillahechabarria599]

@@RZVPeter como uste iso ese motol

[@robodock23]

Love the video. Brilliant. My only question is why not delete the old crank shaft fabricate something to replace it. The engine is just dragging the load. Really impacts the efficiency of your machine

[@FaizalAndyta1909]

Next video make diesel engine from old compressor

[@greasysteve5671]

@THAT Guy Piston rings would probably need beefed up cause you're talking at least 18:1 compression on the low end. That probably lands it in the high 200 psi range, that engine he made probably makes 80-95 psi.

[@08duramaxlover25]

Yess

[@joshsutton9854]

This should be the future for motor cycles

[@quintinlindsey7967]

Please do a motorcycle build with this engine!!!

[@nerk234]

From Italy,great mechanic,great idea, great...fantasy

[@alberteinstein3078]

This guy builds an engine and transmission and I'm worried about changing my head gasket.

[@alberteinstein3078]

@mike brink man it's Lego blocks if you can just remember how it goes back together you should be ok. Take pictures and videos it helps me.

[@frigglebiscuit7484]

@mike brink motorcycle clutch packs are hilariously easy. just look up if its steel plate-clutch plate, or clutch plate-steel plate.

[@thomasreno2634]

The Real Engineering 👏👍🏻

[@VictorGarcia-uh6yk]

More advanced that a Harley engine, has OHC 😂

[@GatorsFan2138]

Lmfao best comment lol

[@getanearlyd8276]

that engine honestly sounds beautiful

[@chandra4893]

Harley version lite .... pleasee build a bike with this engine, geniusss!!!

[@RocketCustoms]

Просто феноминальная идея! Круто!!!

[@Amotikaya]

Это ж декаративно комнатный экземпляр, поедь на нем хотя бы час и все эти сапливые патрубки сплавятся нахрен.

[@jtcnetwork]

test ride video bro, you nailed it

[@adrianteodor7793]

build a bike with this engine!

[@frankrivera4625]

You should make a cover to protect you from the chain area. Great work. It will be a nice update to see. Think safety always.

[@katlinolesk8249]

I would like to use this engine on a chopper

[@garageguy5174]

That’s too cool, just need to go into a dirt bike, Great vids man!!

[@Liza-i7p]

Красиво но не надёжно с компрессора двигатель вы угараете

[@rustyshackleford309]

Really really impressive, you are a wizard with the lathe

[@albertnario4877]

pang malakasan na yan ahh.. haha

[@letslearnsomething30]

hahahah sakto lng bro hehe

[@ابنشمر-ه7ه]

@@letslearnsomething30 صكقنثمقخفهلم٢٢مفنانقفمفمض٠١ىمدىريم١ه÷١ششششش0لقاء ج٠

[@Agani.Al.arabia]

@@ابنشمر-ه7ه ؟؟؟؟

[@joevencorpuz6972]

@@letslearnsomething30 bro ikabit mu na yan pra mkita takbo

[@muhammadnw5869]

@@letslearnsomething30 where are you from

[@KonKrom]

I like how you hook up two ignition modules to make it work :D

[@ianstyles9759]

This is going to get bigger I can't wait to see the next bit added to the engine ,, make it fly please, it can be done with the way you figure things out 😁

[@jordenwelch2447]

Should definitely find a little mini chopper frame to put this on or build one because your are like a god at making this stuff

[@TheHeavensHell06]

That lathe still rocking amazingly......🦾🦾🦾🦾🦾🦾🦾🦾🦾

[@tixzs]

Yes I learned so much can't wait to see more

[@clintonwilliams5571]

Amazing work my friend! Now let's see it in a frame and rolling down the road 🤙

[@85superchris]

That sounds pretty good! I can't wait to see it on a bike.

[@manikandanm.e569]

Nice vide brother .Viewers Please don't dislike ,because this is just a video for who are all dislike this but it is a purely hard work and creativity of success .

[@yourlocalrussiankid9162]

bro you should make a car or a motorcycle using that engine, you are a giga chad for doing this Ik how hard this bc I had to fix an old mini bike before I could ride it

[@theswissvaper]

Maraming Salamat Pare. Kumusta Ka? Very impressed.. Regards from Swizerland.. 😁

[@jokespeople9423]

Best man with machine

[@arthursmith5409]

Now, Fab up some chain gaurds for all the drives, maybe a fuel injection system. Then a cart and a small bike with quick change, swap ability from bike to cart? Your doing what I've only dreamed of doing for years...

[@indiangameplay1423]

It sounds like a Harley Davidson 🔥🔥🔥🔥🔥🔥👌👌👌

[@joshmatthiesen4552]

Wow thats neat man. Good job. Now lets see you make a bike or go cart for it to power.

[@okisaito6860]

Amazing ! genius... Love the sound. Sounds like an old triumph bike.

[@skaftfootball]

Love this clutch mirror custom

[@jasonhicks887]

Simply brilliant my gearheaded fam!

[@slantfish65sd]

Awesome work very cool and creative you have real talent

[@koton_bads]

This engine still sounds really good

[@iqrankhan1649]

unequal length headers yesssssssss! my vtwin subie motorcycle is alive. bro you have some srs talent.

[@eiitapoha]

Nois é BR gostamos de gambiarra, isso é obra de arte.