Ice-o-matic ice machine cleaning

Рет қаралды 6,784

Ice Machine 411

Күн бұрын

Пікірлер: 30

@pralaypatel7110 9 ай бұрын

Your videos are a technicians master class. I appreciate your time and effort in making them.

@calvinthompson5398 9 ай бұрын

I think so too. He’s very good

@IceMachine411 9 ай бұрын

I appreciate your kind words!

@jon-rebeguico4881 9 ай бұрын

I hope to see some Manitowoc and HOSHIZAKI or even Scotsman cleaning and preventive maintenance in near future. Very informative usual great job great video. Thank you from Philippines

@IceMachine411 9 ай бұрын

I’ll do what I can. There are a couple of those videos on my channel.

@RaulPalma-os5jm 9 ай бұрын

Great video! Using this to clean my company’s machine. Thanks!

@IceMachine411 9 ай бұрын

Awesome! Hope it’s helpful.

@Hopefullymarried 7 ай бұрын

Literally worked on one of these today. Had not worked one prior and this video will help me when my replacement pump comes in, plus cleaning

@IceMachine411 7 ай бұрын

This is exactly why I made the video. Glad it helped.

@dlodaservicetech 8 ай бұрын

Thanks for the video man helped me out alot

@IceMachine411 8 ай бұрын

Awesome! That’s the plan!

@cherylbrown5336 4 ай бұрын

Thank you so much for this video. No where does it show you any of this on ice-o-matic manuels! How often do you need to deep clean like this?

@IceMachine411 4 ай бұрын

You’re welcome. I’m glad you were able to get your machine working.

@IceMachine411 4 ай бұрын

Oh and it’s recommended that you clean the machine once every six months.

@jhill.7216 7 ай бұрын

Def thanks many I have this machine at my job I’m having low water flow across my evaporator. Taking that plate off was a pain for me definitely thank you for this 👏🏽👏🏽👏🏽

@IceMachine411 7 ай бұрын

You’re welcome.

@jhill.7216 7 ай бұрын

@@IceMachine411most definitely man

@calvinthompson5398 9 ай бұрын

Proud of that 3/8” nut driver ? 😉😊 worst part of that job is the water tray. Grrr. Nicely done!!! You rock!😎

@IceMachine411 9 ай бұрын

There’s gotta be an easier way!

@kayashimz 6 ай бұрын

@@IceMachine411 I tried to remove the trough the way you did it in this video but I removed the bin first then it was super easy! I didn't realize that I couldn't just use a 3/8" deep socket with a ratchet attached. I had to use an extension to reach, otherwise the ratchet would be obstructed by the aluminum piece that holds the rod in place. Try it, I didn't run into any problems by removing the bin first. When I reinstalled everything, I installed the trough first, then the bin. I did have to carefully maneuver the bin to clear the rod and ensure the two screws in the back also align, still only took about a minute.