IMPOSSIBLE Floating "Flame" Chair Build 🔥🔥

The first 1000 People to use this link will get a FREE Trial of Skillshare premium and after the trial it only ends up being $10 per month!
SPONSORED BY SKILLSHARE: - skl.sh/johnmalecki11201
With so much enjoyment around the Cave Table and Floating Chair, we build an IMPOSSIBLE Floating "Flame" Chair. For this project I use an Oak slab, some power carving, and a crazy Finish!
If you like this IMPOSSIBLE Build, Check out these!
here are some other great videos you enjoy
NEW MERCH 🔥🔥 ! - shop.johnmalecki.com/
- IMPOSSIBLE Floating "Cave" Table Build - • IMPOSSIBLE Floating "C...
- IMPOSSIBLE 2 Legged Chair Build- How Does It Work? - • IMPOSSIBLE 2 Legged Ch...
- IMPOSSIBLE Floating Table Build - Will It Work? - • IMPOSSIBLE Floating Ta...
If you Like these, here are some more great videos you'll enjoy.
10 Must-Have Tools For Beginner Woodworkers- • 10 Must-Have Tools For...
5 EPOXY Tips I Wish I Knew As A Beginner!- • 5 EPOXY Tips I Wish I...
PLANS - www.johnmalecki.com/digital-p...
SAFETY GLASSES - geni.us/4h6xaM (Amazon)
Proudly Supported By:
Woodcraft - bit.ly/JM_Woodcraft2020
Timberland PRO - bit.ly/JM_TimberlandPRO
BITS & BITS - bit.ly/JM-Bits CODE - MALECKI15 = 15% Off
My Top Tools and Product Affiliates
Woodworking Tools - kit.co/JohnMaleckiBuilds/wood...
Metalworking Tools - kit.co/JohnMaleckiBuilds/meta...
Favorite Finishes - kit.co/JohnMaleckiBuilds/fini...
My Camera Gear - kit.co/JohnMaleckiBuilds/came...
Musicbed SyncID:
MB011XFHPMRMIQG
#PowerCarving #Impossible #skillshare

[@roan5250]

Bobby is just a different breed of crazy artist

[@giggidygiggidy4884]

He’s a bloody genius.

[@WindyCityBassin]

The fact that you watch Bobby Duke makes me like this channel even more....wewd!

[@phanorkner]

They desperately need to colab!

[@ilkslaya7333]

@@phanorkner I want that!

[@kennywinchester5243]

I cried laughing hysterically at work when you said “I tooted and it traveled to my mask” 😂 my co workers are worried about me now 😅

[@Maninawig]

Same bur watching this from home

[@bmw370]

I'm a welder and we use these same "spacesuit" for our helmets. If you want to help against tooting and smelling it after, you can get a charcoal filter for it instead of a particle filter. Been there done that... It'll filter out the worst hang over fart and you'll never notice it!

[@DIYDREW]

Dude, this thing is dope! It's like a cave on fire! I'll bet you could sell it to an underground goth club for big bucks--nice job my dude.

[@susanhobbs2463]

Amazing chair. You should add a red velvet seat cushion to it. Love your videos!

[@sarahradtke8767]

I thought you were gonna actually use flames to burn the wood. That would've been even more amazing. This is a cool build.

[@aidanchase8226]

I'm a junior in Central Texas, I have been doing welding, architecture, and carpentry for a little over 7 years. I love what you do and I would love to see some idea videos about projects.

[@noeR_22]

I love to watch Bobby Duke. He is funny but inspirational. I like that

[@1kenneri]

You should make a shirt that says “Punch 2020 in the Face”

[@xjlift2095]

Make a shirt that says I want a 9mm in my head

[@stormyeffects4795]

@@xjlift2095 Why would you say that?

[@kandipiatkowski8589]

Bobby Duke is hilarious and extremely talented!!! Some of the music playing in the background sounded similar to the doctor who theme. I approve...🤓👍

[@MCsCreations]

Fantastic work, John! 😃 You know what would look even better? If you had painted it red then black and then some sanding... You know? Like one of those old milk paintings! 😃 Anyway, stay safe there with your family! 🖖😊

[@brennanconsidine3399]

I think the space suit is my favorite tool in the shop

[@maxortega8073]

idk if it would work but you should try rounding the edge of the acrylic to see if you can eliminate the edges and how visible they are

[@household5soapcompany95]

I'd like to pause for a moment and really appreciate the whole 1960's Michigan trucker / Bocephus look you've got going on. It's very complete.

[@ErickYn23]

Bro that was crazy 😮 if I was rich, I wouldn’t mind buying with the millions of dollars 💸

[@SpencleyDesignCo]

KIller videos boys! I'd really love to see you all design the same table, and then see who builds it best by themselves!

[@WoodcraftSupply]

That chair should be featured in an interview with Ben Roethlisberger sitting in it!

[@deuxbleux]

I love your work, can't wait to join the carpeting industry once I have my senior year finished! Thanks for the inspiration and great videos. :) P.s: Greetings from Australia, it's 1am

[@amryasser4891]

I'm going to work at my grandfather's work shop this summer, so many ideas from your projects. Can't thank you enough

[@Tanya_Maria]

Amazing chair! That's my favourite out of eveything you've built. Except maybe epoxy river tables. I'm totally obsessed with those ❤

[@rebeccabrannon1201]

Love your version of the cave table, it looks like it's floating.

[@boxingandbbq3596]

Client: "I need a chair that matches my personality" ~ The Devil

[@nickiallen2113]

Imagine how much fun Bobby would have, let loose in that workshop!

[@damianeickhoff1020]

The hoodie would look better with some cross hair rifle sights incorporated into the logo. The chair is WICKED COOL!

[@Andy-jq5yw]

The black kem aqua really makes it look more like an obsidian chair vs cave or flames

[@shaunholbrook8628]

This guy has some serious skills, your videos are awesome. Thank you

[@WoodcraftSupply]

Holy Bat Chair Batman!

[@wafflezrus]

Hoodie short sleeves! YES!

[@moniquejulius6128]

Love your energy and ingenuity.

[@LifeinOurLane]

Grinding, carving, and shaping looks so crazy how it transforms. Great job! Also "2020 is trying to get us, we got to get it back" Best line ever!

[@azurenight5160]

You are a good wood worker and you inspired me to get into the craft thanks.

[@ICanCreateThat]

This and the last video have given me inspiration to do an umbrella stand/coat rack. But I want it to have LED glowing features. I do have some rainbow discs from IKEA that need to be utilized. 🤔

[@jfromdedbydezine2409]

Man I feel like you're just one step away from carving out a dinosaur/ dragon skull chair with these last couple builds.... might be something to think about. As always fantastic work sir, & thank you for doing what you do

[@John_Malecki]

Sweet mother of god !

[@elainehoward8822]

OMGOSH That cave chair is absolutely stunning, I would have that in my living room it’s so beautiful. A fantastic job making this. TYFS xxxxxx

[@undeadwiccan]

I smell a collaboration between John and Bobby in our future.

[@koonelos]

Great wood sculpting! Perhaps you could benefit from an over-the-table exhaust like a welding exhaust or something, to help you with the dust.

[@Godemes]

"Quit staring at my chesticles!" Stay Squirrely! There are no mistakes, just different styles.

[@TheDesignerXD]

The Leg up Explanation was too funny. heheheh. Very National Lampoons. Love it.

[@shaneakers6671]

When are you and Bobby Duke gonna collab? Y’all need to get squirrelly with some wewd.

[@paulgunn7535]

Like the short sleeve hoodie. You should make one that says get squirrely and punch today in the face.

[@markemerson5324]

love the shirt - you should do one with the fist as a pocket logo and then the words on the back!

[@alexrounds7290]

Amazing. Job Well Done. Love watching you guys work!

[@abdulahahmadzai9461]

You should round up all of your amazing/crazy projects and open a museum of squirlyness

[@Jaime1698]

Woody's phrase is violent and that's not good, the work is insane like the others, 5 stars, hug from Portugal.

[@Scottbarb1109]

That chair is bad ass

[@kosmotto]

Just sick

[@markemerson5324]

This is awesome - I really enjoyed you developing and changing the design as you went. You are enjoyable to watch and learn from! Stay Squirrely John!

[@fleetswoodshop3339]

JOHN THE CHAIR CAME OUT CRAZY GREAT .VERY NICE .FROM DOUG

[@jessiethoodjr439]

Love the murch

[@ClintTredway]

Love it man. It’s awesome how you just let the project flow how it flows..

[@wcfpjfox]

Love chair, Merch and channel! Who makes the respirator? It would be an awesome addition to my carving equipment.

[@scottyoung1909]

I second this question! Lol really cool respirator, need to get me one of those.

[@IntentionalGains]

Awesome build, John! Great job on doing things on the fly. This is the first of the "cave" styled builds I've seen. My first time seeing acrylic incorporated like that in furniture design and I think it's freaking awesome. Would love to do a build like this one day and I hope that "cave" furniture will start trending more! That thing needs a freaking batman emblem on it!

[@SomeGuy-rc2lc]

I definitely want to try carving. What kind of discs are you using on your angle grinder?

[@bluebam8038]

Have you considered selling chairs like that because i would buy them and it would be great to get a home made just from your style

[@gamingwiththeworkingman3871]

It looks like a throne. Great job man.

[@TheRuko15]

By far the sickest thing I've seen on this channel!

[@samrollason8327]

To make it look even cooler, you should put red LED’s inside the bottom of the chair

[@dillonanderson1168]

Love all of the impossibrew builds!!

[@maxortega8073]

"gotta panel the panel together to get the bigger panel to use for the panel so we're gonna start with this panel" something like that -John Malecki 2020

[@ianbishop934]

That hoodie is a winner

[@joshalters3940]

Like the hoodie...launch it and I will buy one for myself for Christmas.

[@loopymind]

your own toot, is always a hoot

[@bradenharris2214]

Great video! Chair came out great! Love the Nick Offerman picture! Lol! Thanks for sharing!

[@trey4484]

Love the short sleeved hoodie

[@freddie966woo]

That looks amazing

[@TotalBoat]

This chair is fabulous! 🔥🔥🔥

[@timring1344]

That was amazing. The black color does lose a bit of the details in your carving though. I'd like to see another one that has a burnt look to it to match it. Awesome work. Inspirational.

[@doughoffer1545]

This is my new favorite channel, you guys rock! Keep it up.

[@lesterleysath1000]

Total bad assery!

[@logik_iss_da541]

Hello John, I am a student from berlin , you catch me with the Cave Table and know I am looking ever video from you. best gratings from germany

[@paule5812]

That 3m versaflo helmet is nice they even make a welding hood as well

[@raredog939]

Legitimately insane! Wow

[@seanharrison5064]

Just curious do you think it would help make the acrylic disappear more if you beveled the vertical edges?

[@Brett_is_Veng]

thats the sort of build i like, interesting and still practical to use. And its a John heavy episode too and that cant be a bad thing! Nicely done

[@gavinhicks7621]

Looks amazing but quick question would the acrylic be clearer and even less noticeable if you rounded the edges instead of leaving them square?

[@Justin-yh9pm]

Frickin BAD ASS!!!!!

[@tommyis13]

Love it

[@jaredhiatt4136]

Stumbled upon your channel for tips about woodworking and love it man! Thank you for being awesome 🤓

[@kellydobberstine5011]

Thought bat cave and now I can't unsee it.🦇🖤🦇🖤🦇🖤🦇 👍

[@andybuja]

Would radiusing the acrylic vertical corners help to make them disappear? I have build aquariums but not with acrylic that think. I love it - I would love to make a flying carpet chair for my granddaughter.

[@davidmunn7287]

Dude! U Rrrr the sawdust King!!! Bravooooo! I want to make this chair man!!! Ur vids are excellent!!!

[@everydayjay1002]

IDEA. You said you don't like to carve through fasteners, whether that be a biscuit or a domino, but what if you make your own dominos or biscuits out of maple or walnut, and intentionally power carve through something to have those exposed? That would be sweet as an accenting touch. I guess it would be like a bowtie in concept, but just internal until you find it. You know, organically. Also, I love the hoodie. I actually prefer it without the sleeves. Love the content man, keep up the great work!

[@John_Malecki]

Snag one up!

[@derekdeconti3059]

Impressive John 🙌🙌🙌

[@UWDuus]

nice work :D i always wondered if the corners of the acrylic gets rounded on fx an router and then get flame polished. will the acrylic get more invisable for the naked eye ?

[@CoNyssa]

I think you should release the hoodie as a short sleeve. I can show off my guns as I run :)

[@SpyderHelix]

Hey John, love the videos - I'm learning quite a bit! Quick question - is that a floor shop heater you've got in the center of the room? It's getting pretty chilly here in Oregon and I'm looking for a good heater that won't cause a dust fire. Thanks for the videos!

[@Szamansky]

Robisz gościu kozacką robotę! :D

[@tobeornott1684]

It's fire

[@---Fred---]

a burnt and varnish finish would have been insane !

[@adamfisher8220]

Congratulations you made the new official hot seat

[@TxElite87]

I'd like to see you guys build a corner tv stand.

[@adrianrouse3619]

Extraordinary job! If you do something similar to this in the future I suggest sealing it with fire and a thin coat of epoxy or a semi-gloss finish. 🔥🔥☄️

[@tgrucker]

Now that is cool

[@MultiTom1956]

Beautiful artistry John 👌

[@sgtcrtrdnl]

I had my doubts, but that thing looks awesome! Nice shout out to Bobby Duke, everything he makes is mind blowing lol

[@mcaruso44]

That is literally the best chair ever made!

[@novaspry6444]

So cool

[@landonharris9313]

I feel like John and Bobby would be best friends

[@ryanmacadam2257]

Wow