Increase your Ebike's performance in 5 minutes programming the SW 900 LCD

Increase your Ebike's performance in 5 minutes programming the SW 900 LCD
Rear Hub Ebike Conversion Kits augustineebikes.com/hub-conve...
Front Hub Conversion Kits
Mid Drive Ebike Conversion Kits augustineebikes.com/1middrive...
Great Bikes to Convert augustineebikes.com/affordabl...
Fast E-Bikes augustineebikes.com/3000w-ebikes
Fat Tire E-Bikes augustineebikes.com/1fat-tire...
Because of break through technology developments over the last several years, there is a wide range of options available in electric bike, motor, and battery technologies. These technologies have made E-Bikes faster, more powerful, safer while going much further than ever before.
If you love cycling and haven’t tried an E-bike you don’t know what you’re missing.
SUBSCRIBE to our channel so we can keep bringing you the latest on the world of E-Bikes!
/ @augustineebikes
Twitter
/ augustineebikes
Facebook
/ augustineebike
Our Channel explores:
Fast Electric Bikes
E-Bike Tips
E-bike Reviews
E-bike How-Tos
E-bike Rides
E-Bike Technology
E-bike Conversion Kits
E-bike tutorials
E-bike motors
E-bike batteries
E-bike Accessories
E-bike Gadgets
and more....
ABOUT AUGUSTINE EBIKES
----------------------------------------------------------------------------------------------------------
We’re Dave and Kirby, 2 guys based out of Visalia and Santa Cruz, CA. and we are Augustine E-Bikes. We’ve known each other for years. We are proud to offer a range of electric bike solutions designed to help you ride the way want. We ride these ebikes everyday and test them under every kind of condition. We really enjoy making these videos for you on youtube putting these bike through their paces. These are serious bikes for people who want to get the most out of the Ebike experience.
Thanks for watching, and please feel free to leave a comment, suggestion, or critique in the comments

[@E-Guy]

Thanks for making this, this is the top video found when searching for help. Appreciated years don the line 😎

[@cellphonemadness1255]

Dude this was Soooo helpful. Yes Sir. Thanks man.

[@TheTrenchface]

This was a very helpful video, my manual looks like it was made by a 4th grader lol

[@JerseyStyle7]

Ty👍🏽just installed this motor and display on my Micargi Seattle cruiser

[@michael2466]

Well explained! Thank you so much!

[@RealNoahsGames]

very helpful video thank you

[@jerrypayne9617]

When the E-bike is powered up you can cycle through the max speed, avg speed, battery voltage and system power on timer. . Hold down the mode and up arrow at the same time for three seconds. and repeat till you see what you want to see.

[@gianfragalli]

Thanks for your very helpful video! Can this display be used with Tongsheng tsdz2 engine? I would like to replace the vlcd5 that I am currently using. Thanks again

[@travelwithoutmoving8842]

wish there was a seperate cruise button. Feels like 5 seconds of solid down button pressing for cruise is a headache.

[@boomhauer421]

I set P14 Max Peak Amp to 15 but when I ride up a steep hill with my display on Current, the Current goes up to 33! Why is the actual current exceeding my limit setting on P14? please help

[@Iam-mg9tn]

Hi! Is it possible to replace this SW 900 LCD for the TFT 750 Color LCD ?

[@ig5501]

Hi Augustine, it’s been 3 years and wanted to know your experience updated upon your SW900 LCD Display. I have ordered 2 ebike 12000w with the SW900 LCD Display. I herd there’s a new model ukc1 led color display that just came out not to long ago. But yeah I seen good and bad reviews of sw900, what’s your experience feedback on it ? Is it all weather proof ?

[@yorickleusink]

Hi! Question about the sw900. I just picked up a bike with this system, but when I set P10 (pas) to 0 for pedal assist only it will still give me throttle option. I want this of because in my country it's illegal to use.. Any clue as to why it won't change?

[@stefanstanca8410]

P15 iti poti seta limita de tensiune minima a bateriei. Sub aceasta valoare alimentarea motorului se opreste pana cand bateria va fi incarcata la o valoare mai mare decat cea setata.

[@leebuki8179]

i got an ecotric folding fat tire and there are no 13-15 options on the new display everything else seems the same. I want to change the current. is it done automatically now?

[@angelsalgado9289]

Helpful

[@Nphen]

My display was reading nearly 100km/hour when I was going 25 mph according to phone GPS. I got into the speed sensor setting and dialed it from 47 to 33. It got worse. I then put it all the way up to 99 - and the speed sensor became accurate! This allowed me get my 750 watt motor up to almost 33mph. I gained 7 mph and now have an accurate speedometer thanks to this video. Don't be afraid to adjust the speed sensor if you know it's not working. I suspect that they are throttled down like that to ensure that speed limiters stay well under the legal limit.

[@merlinarias9049]

I has the same issue, my bike is 29er, to adjust the speed I change wheel size setting to 23" and the speed is accurate.

[@russellvancamp1743]

Check voltage POS vaue

[@650038haig]

I change something on this now it says I'm going 175 km in speed when I'm going about 32 km not sure what I done

[@TheOHFiles]

This helped me out but I still have a problem. The throttle tops out at 300watts and 12mph but the PAS gives me max 1500watts and top speed. Any ideas? Thanks

[@user-2uf2kr2c]

Hi, i read somewhere that you shouldn't take the rim size of the wheel but measure the total wheel diameter with tire and use that as wheel size. Regards

[@StanFranChaisur]

hall sensors of the brakes are connected to the controller, but do not work does not generate the energy, how to turn on. from the display is there any setting and which one is in row p17

[@amdrou6197]

can i change this SW900 by better lcd display ? thank you

[@zniklaspvp4127]

hey man i missed around in number 7 and 8 and i need to reset them and i dont know how

[@CaptBill69]

Thanks for explanation. Trying to figure out what I consider a problem: My power assist on a 48V 500W geared rear hub motor eBike I recently purchased in Costa Rica : My new eBike takes off at almost full power in PAS #1 (a bit dangerours to lend out on my funcky dirt road), while the watts meter jumps between 750+W to 200 W. The seller informed me after my paypal purchase with delivery, and then expression of concern; that my eBike was modified for Costa Rica and hills, and I could get by on PAS 0, and just use the throttle. My recent review of settings reveal (P14) Max Amps was set to 22, which is produces twice the watt rating for a 48V 500W motor. I think that does give the motor more power; & testing on hills has not heated up the motor or 22 amp max controller to my finger touch. I hope experimenting with my settings will get me back to normal PAS modes and a properly working watt meter. ... I DO NOT Appreciate this unexpectedly new learning curve. I trusted the shop I purchased from to dial in everything before shipping, and inherited some loose ends to chase down. Still looks like a decent deal for the price, but wondering about longevity at 48 V x 22 AMPS = 1056 WATTS on 500 Watt motor.

[@thomast6638]

I have the same problem. I don't know the numbers. But my 48v 500w foldable takes off like a banshee when I'm in 1st gear and pas1. No way i can pedal fast enough.

[@merlinarias9049]

Amigo tengo el mismo problema con un kit de 500w en nivel 1 y 5 dan la misma potencia, le he tratado de configuradar para q reparta la potencia, pero no ha habido modo. Si pudiste encontrar la forma me avisas.

[@jacqueslambert5060]

like the shades, who makes them?????

[@amazingplaces7128]

How can i set factory default on LCD?

[@norzyhd6593]

How do i reset it to default?????

[@1peanut]

Please help. My mileage is not accurate. I have the proper wheel size of 26 inch. But it says i went 1 mile when i only went 3/4 mile. How do i correct this ?

[@StuWright]

thanks i`m liking your ebike videos! what you say about p05 is differant in my manual though, it says "gear number , maybe 3,5,9" but when i check the sw900a settings on the bike po5 it only has options for 0, 1,2 i`m not sure if thats confusing enough.

[@E-Guy]

This video is for sw900

[@XiaolinDraconis]

0 is 3 1 is 5 2 is 9

[@samforgione9237]

Does these settings work on all ebikes?

[@englishexplorer5985]

How do I set this controller for UK law of 15mph I have tried and all to no sucess

[@England-su9dm]

Hi there what should my speed measuring magnet be if I have a 48v 3000w? any ideas, please

[@Nphen]

You kind of have to ride around, and compare to phone GPS to see how accurate your speedometer is reading out. My bike was reading 100 km/hour when it was only going about 25 mph. I had to adjust the speed measuring from 46 all the way up to 99. This opened up the top end quite a bit.

[@JohnNugent-qp5te]

I done something to mine it says battery full I changed one of these setting by mistake

[@MrJasenstewart97]

My sw900 display isn't giving me my battery percentage, it always shows the battery as full

[@jerrypayne9617]

P15 is you voltage cut off setting. you can not change it, set at the factory.

[@denzelmusul9922]

Здравствуйте, у меня настройка отключения напряжения работает и сам могу изменить

[@rise09lol89]

Hello, im wanting to buy the voilmart 1000w ebike kit, would you recommend it. And also would a 48v 14ah battery be sufficient?

[@Steven__stark]

rise09 lol yes it will give you around 35/40 kilometres range without pedaling

[@FtanmoOfEtheirys]

I have the 750/1500w kit with the controller built into the hub. I haven't ridden it yet, but am excited to as soon as this rain stops in Chicago.

[@rise09lol89]

@@FtanmoOfEtheirys great x

[@richglaser4566]

I forgot one of password on one of my trikes with a 1500 watt hub motor. I can’t get into it now. Do I have to get a new computer monitor now help. Can you point me the right direction

[@rezakahe1612]

سلام ایا در دوچرخه برقی میتوان از LCD3 بجای LCD1 استفاده کرد؟

[@Youremywifenkwdave]

Any help with error code 10

[@user-gc3je4yn9f]

can i get C parameter on s900?

[@user-hw7qw6sm6g]

I'm getting an error code 10 does anyone know what that means ?

[@DecentralEyes]

What is the best setting for a 52 volt battery? (48 and 60 are the nearest available)

[@garrydirvine3579]

Good question… either is not ideal of course. However, if you want to under estimate the battery capacity, the use 48V; conversely, use 60V if you want to over-estimate it. Safest is to set it to 48V… good luck.

[@TheTrenchface]

I can only get my PAS to go up to 3 did I mess something up? It used to go up to five but after I changed the settings I think it went down?

[@raymondhodson1118]

Hey bro, I think that's P05. 0 =3steps, 1=5stepa and 2=9steps

[@thomast6638]

My new bike in pas 1 outruns the pedals while in 1st gear. It just takes off up to 10mph faster than i can pedal. Bike is a 7 speed. Any suggestions on how to match ratio better?

[@rkadster7008]

Go to setting P5 and change it to 2. This will give you 9 levels of pedal assist and it breaks the pedal assist power into 10% of your total power per pas level...ie pas 1 = 10% pas 2 = 20% all the way up to pas 9 = 100%

[@thomast6638]

@@rkadster7008 I went to P5, but it only offered 03 and 05. I switched it to 03 modes and it worked! I'm perplexed why it worked because it should have divided the speed in 3rds from 0 to 30 correct? Anyway, it no longer is jerky and is slower in p1. I'm confused, but happy. Thanks for dropping me off in the neighborhood! I found it

[@rkadster7008]

Thomas Therrell Yeah, and the 05 splits the power into 5ths. The up side is it’s fine tuned and gives you more precise control, the down side is you have to hit the pas up and down button more frequently. If you have a 48 volt 750 to 1,000 watt e-bike I’d say 3 is all you need though.

[@jerrypayne9617]

Also the P14 setting is the max amps current setting. How ever on the newer SW900 this is automatically set by the battery voltage, motor and controller. so setting this to anything will not change the auto setting.

[@biggdogg5323]

I am stuck with error 10 on my ebike display

[@jerrypayne9617]

@@biggdogg5323 the error code 10 is a communication error. did you try to connect a 12v headlight to your setup? The headlight connector puts out the battery voltage. So it will burn out part of the sw900 motherboard causing a error 10 code. It you didn't try a 12v head light than it is caused by a bad connection or something not connected right.

[@soton000]

P10 works constantly on mine both pas and throttle whatever the setting so had to unplig the pas

[@davidthorne5107]

My SW 900 keeps showing error code 10 new controller and throttle still does not work any suggestions?

[@Youremywifenkwdave]

@@davidthorne5107 dis u fix it. I've the same issue.

[@scottw8934]

The Bracket broke on my SW 900 LCD. How do I go about getting a new bracket.

[@ronpagala7496]

Amazon

[@jaychubb3305]

Ya wheel is slightly buckled and not dead round

[@matanbaruch9805]

I did what you said and now every time I approve the edit I can not give gas with the gas knob, just that I turn off the battery and then turn on the battery then the gas knob starts. How I fix it?

[@revparsons3tl]

, I what are the two wires from the display as I cannot seem to connect them into my controller

[@ShiftLikeAlex]

Hey. I have the same issue. Did you ever figure it out? Im getting a error 10

[@darkchild256]

Cruise control sensor I believe.

[@darkchild256]

@@ShiftLikeAlex Cruise control sensor I believe. Error 10# seems to be caused by a missing sensor.

[@danboi9731]

They are a white and brown wires Connection for your front light

[@revparsons3tl]

@@danboi9731 thanks

[@endliberalism4305]

When I go into the menu on the SW900 I only get 9 options, it goes 1 through 8 and then 16 ? So where are the rest of the options ?

[@dannyfiscus4487]

I discovered the sw900 has different version each year produced I have 2 bikes that are different. Also the speed controller makes a difference as far as what options actually work on the sw900. Hope this helps as I had to keep messaging the seller about mine

[@endliberalism4305]

@@dannyfiscus4487 thank you Danny I appreciate your post.. I bought the bike last year 750w hub motor and at first the bike had massive torque but after just one month the power went away and i think it's the battery but I wanted to try settings in the controller first. I want that torque back badly

[@TheBlairHouseProject]

A video of the actual screen vs a video of your back wheel would have been a lot more useful, but it was still good. Thanks!

[@E-Guy]

No it wouldn’t have, he explained clearly and concisely.

[@davidthorne5107]

I keep getting error code 10 what would cause this?

[@Youremywifenkwdave]

Same here.

[@warlockboyburns]

Is there any regen settings?

[@AugustineEBikes]

No

[@thurobreakdowns1430]

I got mine to go 38 mph or 61 khm

[@outwithsibs8094]

Mine has an extra 6 settings, any idea what they do??

[@IncreatorAgent]

Same

[@ericsooy5430]

Any word?

[@outwithsibs8094]

@@ericsooy5430 i think when I asked the seller they said its an empty program and that I should ignore it! (It was a while ago now)

[@JesusOurKing]

This king should have like 22 billion subscribers, easy.

[@romanelemix6082]

Need a password to enter in this menu

[@Steven__stark]

Even at level 24 setting 11 my pedal assistance doesn’t work because it give too many power to fast so once the pedal assistance start it goes too fast and then I can’t even pedal Help me please I don’t find anything about this problem I also have a 1000w ...

[@erandaa]

i have the same issue looks like there is no solution but to use the throtle

[@Chonkybeatz]

I changed p11 to 6 and p12 to 4 and it works better

[@jayvlog9841]

Bam bam bees

[@diskgrind3410]

started off showing the LCD, then at 7, you stop showing us how it works and just talk about it.. thumbs down.... try again, and get that sound leveled.. damn.

[@crispy-k]

Legit has 100 of the same videos copy pasted with a new tittle... Nice channel... Enjoy the profits, it's not like this world was running out of stupid people anyways ;)

[@skyliner4610]

i dont think you know what you tsalking about, P11 is sensitivity as when to start, not how much it helps