These are the basic steps to refilling your coolant system. The largest inconvenience was having to remove the left air box And here is the link on coolant color - forums.nicoclub.com/should-yo...
Пікірлер: 21
@maisgrill78923 жыл бұрын
Keep more videos coming! Maintaining your M56-M37 please
@cydls688fatech73 жыл бұрын
Good video very detail, thank you,,
@yunchongzhao70734 ай бұрын
thank you! Very helpful
@billeebills756215 күн бұрын
How do I know if I have air in my system there was no coolant In my overflow tank or radiator so I just filled it up ?
@alsplumbingservicesllc29712 жыл бұрын
Would there be any issues if the thermostat isn’t installed correctly on. Infiniti m45.
@oscarguerra49652 жыл бұрын
Appreciate ur videos Did tighten that plug work on the leak the first time , or did u replace it.
@EdBwoy2 жыл бұрын
It did initially, but I just wanted to replace it with a fresh basket to seat it properly.
@EdBwoy2 жыл бұрын
It's like reusing an oil drain plug crush washer. It works, but not exactly best practice
@oscarguerra49652 жыл бұрын
@@EdBwoy appreciated! I found the reservoir empty but I never saw any heating temps, hoping all is good. The filler cap wasn’t at top either. But saw some coolant at the bottom of elbow into motor
@EdBwoy2 жыл бұрын
@@oscarguerra4965 the system still has a lot of coolant, not to worry. What I would do for something like that, is just add some coolant to the full line of the reservoir. The engine should suck it into the filler neck over a few engine cycles. If you find that the coolant still keeps disappearing from the system, then you can investigate further. Good job on looking in your engine bay once in a while!
@Nunya-_- Жыл бұрын
@@EdBwoy I had a question i had to replace my radiator support and I’m not sure where the coolant reservoir top hose right next to the cap on the reservoir goes to. Would happen to know where that hose plugs in to? It’s a 2011 m37s. Any info helps I couldn’t find a diagram on google so i came to yt 😂
@richphero1063 жыл бұрын
Interesting that plug on the M35H to relive air at the heater hose does not exist
@rootcozy29784 жыл бұрын
Why you didn’t run the engine to circulate the coolant and to release air? Also hiow did you open the heater core without ac on? This doesn’t look right
@EdBwoy4 жыл бұрын
There are many ways to skin a cat. Zero failures in all the engines I've done like this.
@keithhall16823 жыл бұрын
So coolant came out the back hosing first what does that mean
@EdBwoy3 жыл бұрын
Which back hosing specifically? The Tee fitting with a bleeder? But if your car is at a steep incline, then the back of the engine will be lower than the front and coolant will come out of there first
@MorrisMadeit3 жыл бұрын
Could I do the same routine on 2010 G37 ?
@EdBwoy3 жыл бұрын
In principle yes, it is the same, although some hoses might be in different locations
@iko721510 ай бұрын
Should I leave the coolant cover off , I feel like I will get better air suction into the engine?
@benz1ee2 жыл бұрын
Whats the right coolant for the gy50 m45?
@EdBwoy2 жыл бұрын
You could either use the green that was standard or upgrade to the blue. forums.nicoclub.com/should-you-use-blue-or-green-coolant-yes-some-clarification-on-antifreeze-t622612.html