2021+ Ford F-150 - 12" Touchscreen Radio Installation Guide - Infotainment.com

[@commet1]

A helpful video, Thank You for providing = I finally managed to uninstall my F150 XLT 12" display - it took about 10 hard hours of labor this first time for the uninstall. Two additions I would like to mention for other if okay. 1) the APIM was below the screen, not behind so I did not need to remove the screen at all. But of course the radio and controls below the screen need to be completely remove and the APIM is directly behind the radio controls. 2) the latches on the pins are tricky and mysterious for the cables coming out of the APIM. The second to the largest black cable had a hidden latch you MUST move to the side. And, another hard to see latch on the blue round cable. Without squeezing these hidden latches the cables are non removable. CHEERS JS

[@bertthehoonigan510]

I just ordered mine! i cant wait! quick question i see that the panel for the volume and climate control are not included would you happen to know the part number for it? im having a hard time finding just the panel without all the controls in them.

[@Infotainment_nav]

While you do have to remove the HVAC panel for the install it is not replaced. This kit will utilize the OEM HVAC and volume panel. A new one will not be needed the original HVAC panel is reinstalled as one of the last steps.

[@galaxieman1000]

You are a very good tech, this video is is one of the best if not the best I have ever seen with very thorough and careful procedures to disassemble and reassemble without breaking anything. Those metal insert clips always stick and break at least one of the plastic tabs for me.

[@Infotainment_nav]

Glad we could help!

[@edwardquick3932]

Great install video, many superduty owners would like this for the 8” screen. When do you see that option coming for Ford superduty.

[@Infotainment_nav]

We are always adding and developing new upgrades kits. So if you wouldn't mind taking a minute to fill out our Product Interest List Form. That will help add to the demand for that particular upgrade and vehicle. Our development team takes direct priority based on demand from this product interest list. We'll also notify you if something becomes available for your vehicle. forms.zohopublic.com/infotainmentcom/form/ProductInterestListForm/formperma/m7R2exajUQkfs2WJO8mkDzUcYC2HIt5WrUWxFICnigs

[@jacobdowling9334]

Hopefully this is something they will come out with soon!

[@AngelCutz-iq5rk]

What about if we have a 3rd seat and want a center console you have a kit for that ?

[@Infotainment_nav]

Not at the moment. But our R&D team can look into it. Fill out our Product Interest Form below: forms.zohopublic.com/infotainmentcom/form/ProductInterestListForm/formperma/m7R2exajUQkfs2WJO8mkDzUcYC2HIt5WrUWxFICnigs

[@ramcgmecom]

Great video, thank you. I ordered the kit from you and finished the install this evening. The issue I'm having now is the Backup Camera will not turn on. Screen goes black when I put the truck in reverse. I still see the icons for trailer hitch view and the auto brake - but no image. I have a 2021 XLT without the 360 cameras. I just have the backup camera. Any insights?

[@Infotainment_nav]

Please reach out to our support team at 855-636-6287 EXT 11 or at [e-mail]

[@trenton4712]

Please post your next experience here! I"m highly considering doing this upgrade but would love all things covered before I do lol

[@ramcgmecom]

@@trenton4712 It was ridiculousyly easy to fix, It just wasn't listed anywhere in the instructions. I have an XLT with just a backup camera (no 360). The wire harness has a yellow RCA cable with male/female ends. Those 2 just need to be connected. The only remaining issue is the camera button no longer works when the car is parked.

[@trenton4712]

@ramcgmecom Hey thanks for taking the time to respond with your results! Hopefully the fix for that camera button is easy as well. Cheers!

[@Robert8455]

I watched another guy do a similar upgrade but he did not change out the APIM module. He did have to customize the harness so that it would plug in and also run a power line to the fuse box and add a ground wire but it seems to work without having to buy another module and save some $$$. Have ya'll tried that?

[@Infotainment_nav]

That is one of the first things we tried when developing this upgrade. However, depending on the software on the factory APIM, it may or may not work properly. So just to prevent that from occurring we include a pre-programmed APIM.

[@jesusmartinez4853]

Do you mind making a video of the center console i have a jumpseat but i want to swap it to that same center console like the video thx

[@Infotainment_nav]

The videos that we have are meant to be installation videos for the full upgrade packages that we offer. We are always adding and developing new upgrades kits. So if you wouldn't mind taking a minute to fill out our Product Interest List Form. That will help add to the demand for that particular upgrade and vehicle. Our development team takes direct priority based on demand from this product interest list. We'll also notify you if something becomes available for your vehicle. forms.zohopublic.com/infotainmentcom/form/ProductInterestListForm/formperma/m7R2exajUQkfs2WJO8mkDzUcYC2HIt5WrUWxFICnigs

[@kevindodge2103]

I have a 23 superduty with sync 4 already can I just upgrade to the 12 inch screen

[@Infotainment_nav]

Yes we do offer that upgrade. Here is the listing. infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/2021-2023-ford-f-150-8-to-12-sync-4-touchscreen-upgrade/

[@commet1]

Was wondering if you could recommend the best web site to buy a replacement APIM. Especially including an accurate reprogramming included if I supply the seller my VIN number. Is this possible? Of course, I would like to avoid reprogramming the new APIM - for sure!

[@Infotainment_nav]

The only company that I know of that is working wih OEM Ford APIM modules would be us. If you send me your Vin at my email [e-mail] I can send over a quote for this replacement. Thank you for your interest.

[@morrishoward1652]

Great video how can I order that 12in system???

[@Infotainment_nav]

Here is our 8" to 12" upgrade. infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/2021-2023-ford-f-150-8-to-12-sync-4-touchscreen-upgrade/

[@443Trippy]

Does this come with all the new bezels needed? Is there also an option for the third bench seat ?

[@Infotainment_nav]

Yes this does come with the right bezel to house the 12" screen. However, we do not yet offer the bench seat conversion just yet. infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/2021-2023-ford-f-150-8-to-12-sync-4-touchscreen-upgrade/

[@443Trippy]

@@Infotainment_nav once you guys have the conversion ready I’ll buy a kit immediately

[@Vislas]

Does the kit come with the lower pc for the climate and volume controls? And I see on the site it asked if my truck has floor mounted controls not sure what that is ?

[@Infotainment_nav]

In this vehicle he is working on a vehicle with the floor mounted console as opposed to a seat which can be there instead. This is a full kit as well so you should have everything you need. If you go to the last picture on this listing you can see a picture of everthing that is included. infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/2021-2023-ford-f-150-8-to-12-sync-4-touchscreen-upgrade/

[@bertthehoonigan510]

so is that a no on the climate and volume control piece? i see in the picture it doesn’t show it

[@beanboy367]

Why isn’t the new hvac and volume control plastic panel included? For $2000? What are you supposed to do without it? You certainly can’t complete the installation. Thanks.

[@Addmoreboost]

Is this a plug and play upgrade in a 2017 f150 Lariat?

[@Infotainment_nav]

No unfortunately this is only for 21+ F-150 vehicles.

[@edgar-4-days_921]

Did you have to program first? Or does the screen have to turn on without programming. Just installed mine and won’t turn on

[@Infotainment_nav]

The hardware that comes with the Ford packages are pre programmed to the VIN# to accommodate a plug and play install. So the video would be installing a pre programmed unit.

[@trenton4712]

I have a '23 F150 STX 4X4 with the 8 inch screen and no 360 camera, just a backup cam. Do I need to upgrade my APIM before doing the screen still?

[@Infotainment_nav]

Yes the APIM modules are different between the 8" units and the 12" units. The module will have to be replaced.

[@trenton4712]

@@Infotainment_nav Thank you for the reply!

[@autiannagrandberry4462]

Does the price on your website include installation? Thats a grand or two more ive seen for the same unit on other sites.

[@Infotainment_nav]

The listed cost on this link does not include installation. Please keep in mind we do not sell cheap equipment. We sell OEM quality equipment that is fully tested, pre-programmed and procured based on your Vin. There are plenty of companies that sell cheap products. We want to provide a part that we are able to guarantee works and will continue to work. We are confident enough in the product we sell that we are able to warranty it through installation and up to two years depending on your selection at check out. We feel our pricing is competitive as we are comparing our pieces to the cost of getting a new vehicle as opposed the cost of an aftermarket part whose quality is greatly inferior.

[@Infotainment_nav]

infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/2021-2023-ford-f-150-8-to-12-sync-4-touchscreen-upgrade/

[@markwangontario7573]

Hi, is the 12” screen and A pin module ford oem parts or they come from a third party? Thanks

[@Infotainment_nav]

No our kit is 100% OEM parts. We want to provide solutions to upgrade your vehicle without having to go aftermarket and settle for reduced quality but also without having to go through the delaer as they would rather get you in a new vehicle then extend the life of your current one.

[@c_los9111]

If I have to replace the screen (mine cracked) would I just plug in and work right away?

[@Infotainment_nav]

Our OEM 8" to 12" upgrade is plug and play if you have Nav now. If not it needs a bit of onsite programming to get the Navigation working. Those who are upgrading from a non-navigation equipped system will require in-vehicle programming through our Remote Tablet Rental offering (sold separately). This will not apply to customers who have existing navigation within their 8-inch Sync 4 display or for customers who would prefer to not use embedded navigation featured in the 12-inch Sync 4 upgrade and to use navigation applications via Apple Carplay and/or Android Auto. Upgrade link infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/2021-2023-ford-f-150-8-to-12-sync-4-touchscreen-upgrade/ Tablet rental (If needed) infotainment.com/shop/services/remote-programming-service/programming-service-remote-tablet-rental-via-teamviewer/

[@jimhall1634]

Why is the pass through harness necessary?

[@Infotainment_nav]

Some pins change between the different screen sizes. Every Ford Upgrade we sell that has a change in screen size requires a passthrough harness of some kind.

[@DanielHernandez-vc8xr]

Can i purchase the harness cables from you for the bypass?

[@Infotainment_nav]

No, we only sell this upgrade as a kit.

[@johnjesus971]

I would think this would be the same for the F350? Am right in that assumption?

[@Infotainment_nav]

This package is currently only compatible for F-150. Our R&D team is currently working towards being able to offer this for the Super Duty models in the near future. I invite you to fill out the following Product Interest List Form and we will notify you if and when the kit is developed and available. forms.zohopublic.com/infotainmentcom/form/ProductInterestListForm/formperma/m7R2exajUQkfs2WJO8mkDzUcYC2HIt5WrUWxFICnigs

[@diegoaguilar2055]

any location in miami-fortlaudeldale area?

[@Infotainment_nav]

Here is our verified installers page that will allow you to enter you zip code and it will tell you who is nearby infotainment.com/verified-installers/

[@iSubUwU]

Heyoooo, so i see this system is with installing Sync 4, i checked my XL 21 and it already has Sync 4, would i be able to just nab a display from a normal 12” and swap it that way? (From what i found online it seems most all the swaps are installing sync 4 but mine already has it. And i apologize if this isnt a question you answer)

[@Infotainment_nav]

This is the installation video for the plug and play package that we offer. The kit is meant to accommodate the conversion from an existing 8" Sync 4 display to a 12" sync 4 display. The content of the kit includes a pre programmed APIM module for the 12" display (different than the 8" Sync 4 APIM), the 12" Sync 4 display, and the wire harnesses. The wiring that comes with the kit integrates in to the existing wiring that the vehicle is equipped with to accommodate a plug and play install.

[@ManuelSanchez-oe3ns]

Cool intro

[@Infotainment_nav]

Thanks!

[@charliestarita7969]

Where are you located

[@Infotainment_nav]

Our main facility is in Oviedo FL but our Ford equipment comes out of Dallas Texas.

[@angelcontreras8394]

⁠​⁠@@Infotainment_navis there a facility in Dallas Tx that provides this install services?

[@tatertotsandbattlebots]

Awesome video!

[@Infotainment_nav]

Thank you very much!!