Ingalls Camber Bolts Install - Honda Civic 2012 2013 2014 2015

[@frtorres87]

Pro Civic always comes threw with the videos.

[@HC7-MA]

+Frank Torres - *through*

[@frtorres87]

+Mike A thanks lol.

[@WilliamVG]

These high tensile strength bolts? If not, kinda dangerous installing 2 camber bolts on each strut.

[@procivic]

The bolts are generally grade 12.9. We have also abused these bolts on the track with no issues.

[@danjustynchiong]

ProCivic - can you install your 9th Pro civic headlight projector..that would be cool - a lot of people would buy it for sure. like me.

[@procivic]

+Dan Justyn Chiong At the moment, there are no plans for this install, but I will bring it up to see if we will. Please do note, the process is similar to the bumper removal. All bolts will be visible once removed. kzbin.info/www/bejne/sKu2poWQntaJpLM

[@Mopar3.6LV6]

The struts on my vehicle only have one bolt at the bottom where as the vehicle in your video has two. So I’m assuming I will only need one camber bolt on each side correct? Or can I adjust the camber with the camber bolts in another location? i.e. control arm.

[@procivic]

If you only have one bolt, you may have an eyehole style assembly. This style of suspension will not allow camber adjustment from the shock assembly. You would have to find a different means of controlling camber in this case.

[@Sharnul]

Would I need adjustable rear upper control arms to perform the alignment on the 9th gen civics or only the front camber bolts?

[@CaptainTexas92]

So I see they have two separate versions of the bolts for different drop ranges is there a certain amount of adjustment difference between them. My drop is almost dead in the middle of the two mentioned ranges.

[@alexiszandoval6040]

hi... once installed all 4 bolts how do you apply negative camber ???

[@procivic]

+Alexis Zandoval It's best to have a shop do this in order to have both sides at the same setting. In general, when you turn the bolts, you will see the wheels pivot. Simply adjust them to the appropriate camber point and you're good to go!

[@HC7-MA]

Where can I buy the Best Motoring Tsuchiya finger pointer?

[@tylerrjohnson68]

coolio

[@Chambers805]

I purchased my camber bolts from you and my bolts came with two of those tab washers, do I use both or just one? In the video you only used one.

[@procivic]

+James Chapman Generally they are only supposed to include 1 washer. An extra one may have been thrown in by accident.

[@EGGMANNoriginal]

So I ordered the SPC bolts from you guys but am unsure if the arrow and washer tab are oriented the same as the ones used in this video? I see other videos where people orient the bolt and washer in different ways... Any help would be very appreciated.

[@procivic]

Please contact us at [e-mail] for more technical assistance. We'll do our best to answer you questions.

[@hondaSM805]

would this help my front wheels tuck inside the fenders like this? /___\

[@procivic]

+Fabeezy Bruh It can, but not too much. It is mainly design to correct camber.

[@LKGarage808]

You're gonna come in from the rear

[@lleynersosa101]

Does this work the same with spc camber bolts I got from you guys?

[@vickramos9234]

Can someone explain to me how this works??? It just seems like replacement hardware how do you adjust camber from that?

[@procivic]

The bolt has a small section that stick out, it is not straight. When the bolt is turned, the section that sticks out pushes the knuckle forward or backwards changing the camber angle.

[@alexlopez6274]

when are the pro design side window visors for the 15 si be in stock?

[@procivic]

+Alex Lopez They are in stock, for the sedan at least. The coupe is backordered.

[@procivic]

+Alex Lopez They are in stock, for the sedan at least. The coupe is backordered.

[@alexlopez6274]

Thanks ,do you guys know how long its going to take?

[@procivic]

+Alex Lopez I don't have an exact date, but we're hoping for mid to late April.

[@kanereamy2716]

Is it same ignalls bolt on the bottom to too do maximum negative camber?

[@procivic]

+Kane Reamy Yes, it'll be the same bolt. We offer the kit on our site as a pair (1 each side) or the set of 4 that replaces all of them: www.procivic.com/p/m/civic/ingalls-front-camber-adjusting-bolts.html?+front+camber+adjusting+bolts&app_selected=19634

[@kanereamy2716]

Okay and is the adjusting part the same as the rears?

[@procivic]

+Kane Reamy No, the rear is not a strut style like this one. You will need to replace the upper arm and adjust it. I'll include a link to our rear camber install for reference: kzbin.info/www/bejne/bpuUf4KAhZiVr68

[@Chromedome-ss6mg]

It says the page cannot be found ​@@procivic

[@scarred1013]

Ordered these from you guys for my 2015 Si.... pretty sure you guys sent me the wrong ones... I've called several times... no answer....

[@procivic]

Hi PhillipRE, our customercare phone lines are currently closed . We will be closed tomorrow for 4th of July holiday too. If you can please email [e-mail] with your concern and any questions, and they will help you out ASAP. Our phone lines will be open again 9am PST on Wed. Thanks!

[@Bp_tim]

Will these work if my coilovers have a elongated hole for camber?

[@procivic]

+Timmy Hoang Yes, it will simply allow for even more camber than normal.

[@HARDMAN999]

That tab is supposed to face towards the strut.

[@4drturbo85]

No

[@mattrinaldi107]

How many degrees of camber can you get with these bolts ?

[@procivic]

These bolts are rated for correcting camber up to roughly a 3 inch drop.

[@kx-_-21]

This is the same process on the 7th generation?

[@procivic]

+Kelvo Amador The process will be very similar. You should be able to use this as a guide.

[@juancarlosrosales7835]

what the differes betwen 1.5" 3.0"????

[@procivic]

+Juan Carlos Rosales The 1.5 will include a pair of bolts to adjust up to a 1.5 inch drop. The 3.0 will include 4 camber bolts to adjust up to a 3.0 inch drop

[@samsoriano6269]

Hi guys what size are for the 9Gen?? 14mm or 16mm??

[@procivic]

It will mainly depend on the trim levels. Some models will use 14mm while others (mainly the si and other higher trims) use a 16mm.

[@mhonchrislachica6091]

Is it the same for 2009 Honda Fit?

[@procivic]

+Mhon Chris Lachica The installation would be very similar. There may be minor differences in torque spec or sizes, but this should be similar enough to be used.

[@kx-_-21]

What brand of the camber bolt are good?

[@procivic]

+Kelvo Amador We are using the Ingalls camber bolts we offer on the site. They've proven to handle hard track days.

[@pinoceo]

Clutch video ty

[@Guero.Evox27]

Would this be the same way when installing SPC front camber bolts? Thank you!

[@procivic]

+Andrew alonzo It should be. Most camber bolts will be very similar or exactly the same.

[@mikehogi]

Can the Camber be adjusted on a 1989 Honda Accord? @ anyone please. Nice video thanx 4 sharing @ Pro car studio .

[@MJ-iq9hv]

Nice

[@procivic]

For more detailed information on Ingalls Camber Adjusting Bolts, and/or to purchase them, check out our product page here: www.procivic.com/pages-product_car_part_info/category-69_83/product-799/index.html?+front+camber+adjusting+bolts