Injector Bypass- Downstream to Either Reel

I finally added the injector bypass to my trailer. I also added a 3-way ball valve to my downstream set up to be able to downstrem from either reel.

[@joegideon6730]

Plumbing skills are a requirement for this job for sure. Rig looks awesome! Thanks for sharing.

[@allproexteriorservicesllc5338]

Agreed. Thanks!

[@VaJamie]

@@allproexteriorservicesllc5338 Does True Blue work as well as the tape you mentioned?

[@allproexteriorservicesllc5338]

@@VaJamie Yes, True Blue works very well. Just a little messy. I mainly use True Blue on my soft wash fitting due to higher concentrate of SH. Thanks

[@johnwitt586]

Man, you are always posting great content! Definitely gives you more options on the trailer!

[@allproexteriorservicesllc5338]

Thanks John!!

[@bradclark1752]

Awesome video man! “T Rad” watching in B’ham!

[@allproexteriorservicesllc5338]

My Dawg!!!

[@TheMhowi007]

That blue monster is life changing. I just ordered all the parts to build that box for saop you built looking forward to that.. I just added the bypass today really pumped about that. That being said I also just ordered that three way plastic ball valve instead of using it for 2 guns I wanted to use it as a flush system for my new soap box have one line for soap/bleach then the other going strait to a water and bleach neutralizer cube

[@allproexteriorservicesllc5338]

Awesome!! I actually have 2 3-way ball vales. One to switch between SH & water, and the other one to choose what reel to send it to. Let me know if you need any assistance with the box. Thanks

[@TheMhowi007]

Ok glad you commented cause wanted to make sure that would work gotta love upgrades! Thanks alot and will do

[@powerfulimprovements]

Great idea as usual

[@allproexteriorservicesllc5338]

Thanks!! I am glad you talked me into it!!

[@powerfulimprovements]

@@allproexteriorservicesllc5338 😂✌🏼

[@bobodine9299]

This is funny seeing this video today this is the question I asked Doug Rucker why not put your Downstream injector on the whip line and put the dn10 valve on a straight path that is a smartest thing you did I believe and I asked him that question for the same reason you mention so you can do surface cleaning without losing pressure

[@allproexteriorservicesllc5338]

Agreed!! Love the by pass. Thanks

[@davidmaco1]

do you have a way to flush out the injectors??? that is what I use my three way ball valve for is to flush the injector out. you will love the by pass

[@allproexteriorservicesllc5338]

Yes, I have another 3-way ball valve that runs to my SH and water tanks. I just switch to water and flush. The by pass is awesome for sure!! Thanks

[@michaelc7283]

I think i missed something. How will you rinse the injector with water if the soap is connected. Again, i missed something. That is a pretty cool idea. Thanks for this video

[@allproexteriorservicesllc5338]

I have another 3-way ball valve that is connected to my SH tank & water tank. I just switch the ball valve to water and rinse. Thanks

[@enjoythesho1992]

Are those 3/8 T fitting from Amazon they say they are only rated for 2800 psi?

[@allproexteriorservicesllc5338]

I purchased my fitting from Southside Eq. Not sure of the rating tho. Thanks

[@genebernal6260]

I have a 2 pump 2 reel setup with downstream on both. Both pumps will or could surface wash and with that being said wouldnt I want 2 bypass injectors?

[@allproexteriorservicesllc5338]

Yes, you will need two. Thanks

[@ogFr3nzy]

jsut to be clear, since im getting into Pressure washing, u run SH while surface cleaning? whats the point of downstreaming there? i thougth downstreaming is not strong enough for surface cleaning.

[@allproexteriorservicesllc5338]

You should not run SH while surface cleaning. You could pre or post treat with SH. Sometimes a downstream mix will work. Thanks

[@SOB_13]

Did you buy this all together in a kit?

[@allproexteriorservicesllc5338]

It was a kit from Southside Eq. Thanks

[@mikem6197]

You run a 1/2” whip hose or 3/8” on the bypass? Thanks for all the help and great content!

[@allproexteriorservicesllc5338]

I am running a 3/8" hose. Thanks

[@mikem6197]

Thank you! One more question if you don’t mind. I want to set mine up just like that. What are those on both sides of the chemical injector, just a female & male 3/8 coupler? Thanks

[@allproexteriorservicesllc5338]

@@mikem6197 I used the couplers on both sides if the injector. I did use 2 adapters on the ball valve. I purchases the kit from Southside Eq. thanks

[@allproexteriorservicesllc5338]

@@mikem6197 Yes just couplers. I did use nipples on the ball valve.

[@HouseWashingRick]

I make a small stainless steel box for the small 3 way ball valve. If anyone wants a picture of what it looks like let me know. The 3 way ball valve goes into the box and it protects it from every getting broken

[@allproexteriorservicesllc5338]

Nice. Send me a picture if you can.

[@HouseWashingRick]

@@allproexteriorservicesllc5338 how can I send a picture through KZbin

[@allproexteriorservicesllc5338]

@@HouseWashingRick Not sure. But you can send it here. facebook.com/allproexteriorservices/inbox

[@HouseWashingRick]

@@allproexteriorservicesllc5338 ok i don't have Facebook but ill give it a shot

[@allproexteriorservicesllc5338]

@@HouseWashingRick You can shoot me a text from the number in the video. Thanks

[@mattburns4407]

Hey bud are u on fb? How can I message u…I’m having issues since in installed the remote box…

[@allproexteriorservicesllc5338]

I am on FB. you can also find my contact info in the videos. Thanks

[@DumbCarGuy]

Blue Monster is much better than Tru Blue. I keep getting leaks with Tru Blue off of my 4gpm 4400psi pump. The PSI rating is terrible for Tru Blue maybe 800 or so. But nothing beats and I mean nothing beats HERON Powerseal 932. $70 for 8oz. (Ouch) But it has a 10,000 psi rating and is for hot water and steam as well. If your sick of those little drippies and we all are. This is the way to go.

[@allproexteriorservicesllc5338]

I use both Blue monster & Tru blue. Both has worked well, but love the Blue Monster tape. Thanks

[@mikefox7204]

🇱🇷💪💪💪🇱🇷💵💵💵

[@jimmywarren6685]

I see no benefit to the bypass...that small amount of water volume increase makes almost no difference and would never be worth the cost of the bypass.

[@allproexteriorservicesllc5338]

I lose 1.5 GPM going through my injector on my 9 GPM machine. Thanks