Disc Flower Vase With Easy Inlay | 4-Ways Woodturning Project

Richard - • Richard Raffan turns a...
Mike - • Multi Axis Disc Flower...
Sam - • Disk-shaped Bud Vase--...
Enjoy.
_________________________________________________
KLINGSPOR CROATIA - www.klingspor.hr/
CLOTH BACK SANDPAPER - www.klingspor....
PAPERBACK SANDPAPER - www.klingspor....
SANDING PAD - www.klingspor....
SCOTCHBRIDE PAD - www.klingspor....
150mm SANDING DISCS - www.klingspor....
_________________________________________________
CRAFT SUPPLY USA WEBSITE
woodturnerscat...
VICMARK VM120 CHUCK
woodturnerscat...
MOFFATT WORK LAMP
woodturnerscat...
_________________________________________________
MY LATHE
drechslershop....
STEINERT WEBSITE
drechslershop....
AFFILIATE LINKS.
NEUREITER and WOODCUT tools I use :
M42 BOWL GOUGES - neureiter.idev...
SCRAPERS - neureiter.idev...
CRYOGENIC BOWL GOUGES - neureiter.idev...
WOODCUT PRO CUTTER - neureiter.idev...
WOODCUT PRO ADVANCE - neureiter.idev...
IRONS SHEAR SCRAPER - neureiter.idev...
WOODCUT BOWL SAVER - neureiter.idev...
________________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz...
Spindle gouge -www.gurtool.cz...
Calipers - www.gurtool.cz...
Sanding pads - www.gurtool.cz...
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr...
BENCH GRINDER
www.tobi.si/hr...
DIAMOND FILE
www.tobi.si/hr...
________________________________________________
disclaimer Methods that are shown works great for me and they are not only methods out there, if you find this or any other method not comfortble,please use some other way.
Thank you and enjoy

[@donaldadams5342]

Hi Tomislav. I am a retired, disabled Senior Master of Art in South Australia & have just stumbled, happily, on your site. I loved the crisp, clean workmanship & the obvious sharpness of your tools. I thought that the shape was very pleasing & the inlay work, using your specially made tool, was excellent. Cheers, Don from South Aust.

[@tomislavtomasicwoodturning]

Mr Don, thank you very much

[@glencrandall7051]

See what thinking out of the disk can result in. The other three worked to what most of us read into the challenge. Tomislav just reads a bit differently. But that is the whole point of the little exercise. Well done Tomislav. Thank you for sharing. Have a great day and stay safe🙂🙂

[@tomislavtomasicwoodturning]

Thank you sir,I might missunderstud the task altogether😄 but end up quite nice.... Thank you for lovely words

[@RichardRaffanwoodturning]

Those lines were a lot of work, but the crispness makes the effort worthwhile.

[@tomislavtomasicwoodturning]

I agree as well,thank you Richard

[@bobh5616]

A great way to do inlays - thanks for the lesson

[@Ciaran-py1iu]

Hi Tomislav, this is another great video. I always watch with interest. I particularly like the way you turn beads on crossgrain(faceplate) projects. It's something I'd really like to be able to do. Do you have a video where you go through the process? I did look through the early videos but can't see anything. Keep up the excellent work. Thanks Ciaran

[@tomislavtomasicwoodturning]

Hi Ciaran, I'll make soon video on that topic, thank you for suggestion 😀

[@Konst-j9j]

С огромным удовольствием посмотрел все четыре видео. Тема для меня новая и, реально, очень интересная. Полёт для фантазии безграничен!

[@alainnoel2198]

Quite nice Tomislav! Enjoyed the turning! One little technical question: with the three in one what size of hole do you drill? My attempts were not very successful yet, either too large or too small for a good fit.

[@tomislavtomasicwoodturning]

Thank you Alain, I drill for softer woods 7,5mm and for harder 8mm like maple,oak etc.

[@crackerjack3359]

Neat. if you apply one coat of finish along the groove first the the CA glue does not run. Same idea when filling cracks.

[@tomislavtomasicwoodturning]

Great tip,thank you

[@jorisdemoel3821]

Heh, that's a different take on it than the other three! Lovely and interesting work on the inlay, though I wonder if the veneer might not show up to greater advantage laying flat. Thanks for another interesting, educational and entertaining video.

[@tomislavtomasicwoodturning]

It may look interesting but I certainly have to think of clamping cauls on curved profile.... That is for another video 😀

[@niklar55]

*The UFO has landed.😊* .

[@richardbufton3605]

Very nice Tomislav

[@scottstubberud1137]

Richard Raffan step jaws in a Vicmarc chuck? I’m intrigued. Does he now have a line of jaws?

[@tomislavtomasicwoodturning]

Vicmark sell step jaws that Richard design 20 years ago roughly

[@scottstubberud1137]

Oh I see! How silly of me not to have known that! Btw I love this project as usual and the way you embed the veneer on the end grain is ingenious. Thanks again for all you do! Scott

[@edwardukleja4583]

Lovely piece Tomislav,who said a disc vase has to be vertical?

[@tomislavtomasicwoodturning]

I guess it wasn't said but I might missunderstud our emails😂.... Well I'll have a video I guess on vertical as well

[@racheldray1057]

What a great inlay technique, and great information about the effect of end grain.

[@tomislavtomasicwoodturning]

Thank you, glad you liked it

[@bradbyers6865]

When you said you were going to use a hammer to break off the inlays I thought you were joking!

[@tomislavtomasicwoodturning]

I use hammer like Jeremy Clarkson 😉

[@tomislavtomasicwoodturning]

Its accually old tehnique, nothing new

[@JonathanBeldon-or8ij]

Great video! When will your refiner be available for purchase?

[@tomislavtomasicwoodturning]

Thank you,final product is on the way so I can make lovely pictures and promotion video,so hopefully in couple of weeks if everything goes to plan

[@barneyrubble5633]

And will it be available in the UK?

[@GwynDefender]

Another wonderful video. Stay safe and thank you for sharing.

[@kevinburrows735]

If you don’t mind, i’m going to try that one.

[@tomislavtomasicwoodturning]

Please do

[@MikePeaceWoodturning]

You always offer a different spin, Tomi. 😉

[@tomislavtomasicwoodturning]

Thanks Mike

[@albertdawson6814]

Very nice. Also very enjoyable video. Thank you for sharing. See you on the next one

[@dchilliard09]

Simple lines, but really nice! Thanks for sharing.

[@tonyturnswood]

That is a great inlay Tomislav! AMAZING idea! I can't wait to try it!

[@tomislavtomasicwoodturning]

I'll be glad to see it

[@stephenkrall7609]

Wow....What a great idea with the inlay. It looks great. I will have to try it. Thanks

[@johnnyb95678]

These 4 ways are so awesome. I look forward to seeing each of you demonstrate your response to the challenge each month. Thank you!

[@tomislavtomasicwoodturning]

Thanks Johnny,we appriciate your support

[@johnnyb95678]

@@tomislavtomasicwoodturning I want to give this veneer approach a try. I never would have thought of doing it the way you showed.

[@William_Kenny]

Beautiful piece tomislav great method using the veneer another masterclass, cheers from will 👍 😊

[@tomislavtomasicwoodturning]

Thanks Will

[@MarklTucson]

This was an interesting 4 ways project and it has been quite enjoyable watching how each of you addressed the project. Very interesting use of the veneer, the effect is quite nice. Nice, elegant piece with just the right amount of decoration. Your's is the third I've watched, now off to see what Richard Raffan has done with this project. Thanks again to all of you for doing these monthly projects.

[@tomislavtomasicwoodturning]

Thank you buddy for supporting what we do ☺️

[@mootnmike]

Thanks once again for your beautiful work.

[@ArtisanWoodturningbyCyndi]

This is beautiful. I just started Woodturning about 18 months ago and videos like yours are so valuable for newbie’s.

[@tomislavtomasicwoodturning]

Really appriciate that and glad to help out

[@turningwiththewoods]

Your first segmented piece - very cool piece.

[@deaneterry8444]

Your work is always amazing. I really enjoy watching you turn, your cuts are so smooth, sharp tools in a master’s hands!

[@tomislavtomasicwoodturning]

Thank you very much, I'm far from master but thank you very much

[@jayscott306]

Great result and worthwhile inlay. That turned out perfect and is another example of you teaching us well, making a custom tool just for that purpose.

[@tomislavtomasicwoodturning]

Thank you Jay

[@Konst-j9j]

Привет, Томислав. Великолепено, как и всегда. Очень интересное исполнение инкрустации. Ты её отделывал (22 мин) крылом резца. А почему не скребком? Ножницами получается более качественно?

[@tomislavtomasicwoodturning]

Hi, thank you very much. It was at hand and scraper was a bit dull and I wad lazy to shape the burr😄

[@valeriehenschel1590]

👏🏻👏🏻👏🏻👏🏻👏🏻👍🏻Wonderful inlay technique. Have not seen that before. Thank you.

[@tomislavtomasicwoodturning]

Thank you very much

[@jimgott119]

Very nice, Tomoslav! I had not seen you before, but now I have subscribed so I’ll see a lot more.

[@tomislavtomasicwoodturning]

I really appriciate that sir

[@DavidBird-uu8km]

Very nice another great 4 way video.

[@AlienLeader4]

That is an awesome UFO. Really like the inlays. Keep up the awesome work. 👽

[@tomislavtomasicwoodturning]

Thank you

[@jimneely4527]

Very nice take on the 4 way project.

[@Ron-vv2wi]

I think they meant a disc in the vertical axis. However very nice technique with the veneer.

[@glencrandall7051]

No, the idea of the four way challenge is to be different. Tomislav nailed it.🙂🙂

[@robertcornelius3514]

Turned out way better then I thought it would.

[@cudamank]

Great idea of the use of inlay.

[@cortlandhunt4721]

Lovely piece! Enjoy seeing how you did the inlay. 🇺🇸👍

[@tomislavtomasicwoodturning]

Thank you very much

[@garyblankenship104]

I can just hope that I live long enough to try out all your creative ideas thank you very much

[@tomislavtomasicwoodturning]

Thank you ☺️

[@kevingeaney7741]

Very nice idea, one i can use in many different projects. Thank you !

[@tomislavtomasicwoodturning]

Thank you,it another tehnique in your arsenal 😀

[@beadedlizard]

Now i know how i will finally use the those veneers that i had in the shop. Thank you Tomislav.

[@tomislavtomasicwoodturning]

Glad to hear that ☺️ you have those inlays on your boxes😄 very discreet inlays

[@DiggaTheWolf]

Awesome again Tomislav 😊

[@glennnord2511]

You made a differ vase then I have see , And you did a very good job at it .

[@tomislavtomasicwoodturning]

Thank you

[@kenvasko2285]

Clever use of the veneer. However, I want a follow up video on a vertical canteen style bud vase similar to the others. You should use the veneer inlay on it, too.

[@tomislavtomasicwoodturning]

We shall see 😀

[@kenvasko2285]

@@tomislavtomasicwoodturning You know your viewers want you to do it and I think you want to do it, too! I think Mr. Raffan would want you to try, too.

[@markduggan3451]

That looks amazing.

[@robertkurilla7859]

It’s a very beautiful piece and I’m curious what kind of glue did you use for your inlay?

[@tomislavtomasicwoodturning]

Thin CA glue, thank you for watching

[@tomislavtomasicwoodturning]

And you can use white Carpenters glue as well

[@kaybee2300]

A nice touch with the inlay.

[@bab7880]

I have a blank of figured maple I think I might have found the inspiration I needed. Beautiful, sir.

[@tomislavtomasicwoodturning]

Glad to hear that ☺️

[@tomislavtomasicwoodturning]

Thank you

[@perrys5954]

You are so very skilled, watching you work feels like such an honor! Thanks for sharing your experience and techniques! If you happen to have a moment.. As a newbie wood turner I have my first set of gouges (1/4", 3/8", 1/2". Only after I received them did I learn they are V fluted. Could you recommend what grind to put on these might serve me best?

[@tomislavtomasicwoodturning]

Thank you very much sir, and wish you all the best on your woodturning journey.... For V flute gouges,40/40 grind works ok, and standard fingernail, I would not want extremely long wings on V flute

[@perrys5954]

@@tomislavtomasicwoodturning Thanks for the feedback I'll try adapt that! I am thinking of getting one 'better gouge' that isn't part of an inexpensive set. Am thinking a 5/8" Bowl Gouge (something without the V flute), does that seem like a good idea? (you've already been so kind and answered one question so no offense taken at all if you don't reply to this second one).

[@tomislavtomasicwoodturning]

@@perrys5954 no worries, have a tiny bit of time before I crack on with the work😄, its good idea as you'll see how well they hold an edge and go with parabolic flute,its will be much easier to shape the gouge profile.... Go for the brands like Sorby, hamlet, Henry Taylor,and ofcourse Crown.... Also to consider if you have the budget to go with m42 steel. M42 from Crown are my favourites for gouges and there line of m2 cryogenic series which my scraper will be....both will serve you well

[@RABWOODSHOPSTUDIO]

Love those projects and how the four of you approach them

[@tomislavtomasicwoodturning]

Thank you

[@tonywatson5551]

lovely design and technique as always cheers Tony

[@tomislavtomasicwoodturning]

Thanks Tony

[@HRConsultant_Jeff]

Nice inlay technique

[@peterbucy1846]

The veneer was an interesting technique. It looks great.

[@tomislavtomasicwoodturning]

Thank you

[@alanneel2749]

Tomislav, Another great idea on the inlay!!

[@tomislavtomasicwoodturning]

Thank you

[@LewisKauffman]

Thanks Tomislav!

[@josephpotterf9459]

Wow nice one Thanks

[@johnwhitteron5296]

Nice work Tomi, I love the inlay.

[@tomislavtomasicwoodturning]

Thank you very much

[@whittysworkshop982]

I always look forward to these 4ways videos 😁

[@tomislavtomasicwoodturning]

Glad to hear that, We appriciate that very much

[@Woodmaker99]

MY work woodturning I love woodworking ❤

[@RaspberryBerets]

Simplistic and beautiful.

[@tomislavtomasicwoodturning]

Thank you

[@jeffkunch9416]

Thank you, Tomislav!

[@tomislavtomasicwoodturning]

Thank you sir for your support and kind donation....I really appriciate that

[@stevenhansen8641]

🕶love your work Tomislav.

[@tomislavtomasicwoodturning]

Thank you sir 😀

[@taysider01]

Great work Tomislav, love it.

[@brucelittle7137]

Thanks for the school on inlay.

[@edmorse3529]

That's awesome!!

[@tomislavtomasicwoodturning]

Thank you

[@oldgeezer1746]

Incredible inlay work

[@StephanieElizabethMann]

I love the inlay.

[@neilwest1858]

To much work for the end result. Sorry