Woodturning - BEST WORKING WOOD???

This was such a joy to turn, although quite hard but with proper tool tehnique it doesn't need sanding....
Just Beautiful.
Enjoy
_________________________________________________
Harvey Europe
www.harveywood...
Harvey USA
harveymachiner...
Harvey Turbo T-40 Europe
www.harveywood...
_________________________________________________
KLINGSPOR CROATIA - www.klingspor.hr/
CLOTH BACK SANDPAPER - www.klingspor....
PAPERBACK SANDPAPER - www.klingspor....
SANDING PAD - www.klingspor....
SCOTCHBRIDE PAD - www.klingspor....
150mm SANDING DISCS - www.klingspor....
_________________________________________________
CRAFT SUPPLY USA WEBSITE
woodturnerscat...
VICMARK VM120 CHUCK
woodturnerscat...
MOFFATT WORK LAMP
woodturnerscat...
_________________________________________________
MY LATHE
drechslershop....
STEINERT WEBSITE
drechslershop....
AFFILIATE LINKS.
NEUREITER and WOODCUT tools I use :
M42 BOWL GOUGES - neureiter.idev...
SCRAPERS - neureiter.idev...
CRYOGENIC BOWL GOUGES - neureiter.idev...
WOODCUT PRO CUTTER - neureiter.idev...
WOODCUT PRO ADVANCE - neureiter.idev...
IRONS SHEAR SCRAPER - neureiter.idev...
WOODCUT BOWL SAVER - neureiter.idev...
________________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz...
Spindle gouge -www.gurtool.cz...
Calipers - www.gurtool.cz...
Sanding pads - www.gurtool.cz...
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr...
BENCH GRINDER
www.tobi.si/hr...
DIAMOND FILE
www.tobi.si/hr...
________________________________________________
disclaimer Methods that are shown works great for me and they are not only methods out there, if you find this or any other method not comfortble,please use some other way.
Thank you and enjoy

[@johnwolf5288]

Nicely done! Holly is a delightful wood for turning. Thanks for the video. Like the quiet operation of your production lathe.

[@tomislavtomasicwoodturning]

Me to😄

[@RayShaw007]

A very Richard Raffanesque video. In particular thanks for showing how you used the bandsaw to break up the log into parts for turning. I've turned holly just the once. It was as hard as heck! Looks fab mind. A turning colleague commented that when holly is very dry and it can be that hard it's like turning concrete! It kind of put me off a bit. And here you are suggesting it's one of the best woods to work. Thanks. i'm going to get back to turning some Holly!!!

[@claudepotter7763]

Very nice gives that autumn feel to it with the colors in it. Never seen it turned befor

[@jimgill1105]

The mark of a true craftsman!

[@DougMilleratWoodSpunRound]

Lovely little dish. A lot more character than I’m used to seeing in holly. Love it.

[@DavidBird-uu8km]

Very nice, all the defects add character to the piece, great information on the band saw. thanks for another great video.

[@jorisdemoel3821]

Always very nice to see you meeting the challenges the wood throws at you and overcoming them. Looks beautiful, thanks!

[@larryd6390]

I am very impressed with your skill. Thanks for sharing.

[@johnnyb95678]

Well done dish and an excellent video. Thank you!

[@tomislavtomasicwoodturning]

Thank you soo much

[@fern6114]

I absolutely need this Tomislav custom scraper, hope you are ok with weather and so on, cheers from Luxembourg 🇱🇺 🇭🇷

[@tomislavtomasicwoodturning]

Soon, very soon 😀

[@deaneterry8444]

I really enjoy your videos! Watching you handle scrappers and gouges is truly mesmerizing!

[@tomislavtomasicwoodturning]

Thank you sir

[@MarklTucson]

Unique piece and the grain is really nice looking; a very different piece of holly. I really like the shape and how you kept the edges. Had my brother in town this past week so now catching up on the videos I missed while he was here.

[@tomislavtomasicwoodturning]

Thank you very much, I hope you and Brother had great time together

[@MarklTucson]

@@tomislavtomasicwoodturning It was great. We always have a great time when we get together. Spent part of the time getting a tractor up and running.

[@Joe-wi1yj]

Excellent, just excellent thank you

[@enchantedwooddesigns3462]

Holly can have a nice white color or some green streaks as well. It is supposedly by how it was dried but i have just let it air dry on the pieces I had. I hated how much I paid for a good faceshield about 15 years ago since it cost over 50$ and I'm a cheapskate. That changed when I turned a big piece of holly as a spindle and an unseen limb piece that wood overgrew flew out and hit me right at where my nose would have been. I stopped complaining about the price )

[@jimgardner5410]

Wow. I'm going to have a look in my off-cut pile now for those smaller bits that may have been discarded. That really is a lovely piece.

[@JamesCouch777]

I'll have to admit I was lost when you kept cutting and cutting into smaller and smaller pieces but knowing that you know what you are doing I kept watching and of course the project turned out amazing!

[@valeriehenschel1590]

👏🏻👏🏻👏🏻👏🏻👏🏻Good choices on the design!

[@tomislavtomasicwoodturning]

Thank you

[@qapla]

Nice turning, Tomi. Working on a knuckle-buster like that is not as easy as you make it look. Really show your artistic eye and your skill on a lathe.

[@tomislavtomasicwoodturning]

Thank you

[@jude4896]

Very nice piece. Thanks for sharing

[@AlienLeader4]

Very cool piece. Would a make a lovely EDC tray. Keep up the amazing work. 👽

[@Ray-DacaTimberworksWoodturning]

Great work Tomi! Cute little dish, I love natural edge and non symmetrical pieces. Cool that you left the bandsaw disection of the log also, you know I love picking your brain as you go along😅

[@tomislavtomasicwoodturning]

Thanks Ray,I have left it for you 😄😄

[@Ray-DacaTimberworksWoodturning]

@tomislavtomasicwoodturning thanks buddy! For me it's about the journey and not the end destination. I know there are others way more experienced than me who may not be the case but I'm thirsty for the knowledge.

[@LewisKauffman]

Beautiful! I really like the natural inclusions being left in place.

[@davemoffat8047]

Thankyou. Lovely piece. I needed to see that kind of piece being made. I have a river near the house and often gather timber that gets washed onto the bank during flooding so mostly well matured having worked it way down the river over the years, just needing died out for a while. Mostly firewood but often look at some of it and wonder how it would turn. I have a bench saw coming in a couple of weeks so will start raiding my log pile for crotch pieces to make into things. It will be into the flooding season soon so I expect to have a lot of stuff to gather up.

[@boooshes]

I have turned lots of Holly - it is a fine wood for turning. Apple is one of my favorites.

[@stevenhansen8641]

🕶nice piece Tomislav. It’s interesting to see how you design on the fly. Thanks

[@tomislavtomasicwoodturning]

Thanks Steven

[@jimgeelan5949]

I think this type of bowl turning is the most exciting 😅 you don’t😮 know were your going or whats coming up next and at the end beauty is in the eye of the beholder 😊 ( and hope someone else likes it enough to buy it ) lovely job Thomo 😊 as you added the oil at 24,30 it looked like rhinos 🦏 face

[@tomislavtomasicwoodturning]

Thank you Jim,I really appriciate that

[@greggerstner5599]

In South Carolina, we have 2 species of full-size trees, and another native (yaupon holly) that sometimes has some decent size. And, of course, dozens of exotics, st least one of which has naturalized. So a lot to choose from. As mentioned in these comments, if you want pure white, rough out fresh and carefully dry quickly. Or just apply wood bleach. Most folk don't care. My own favorites: Bradford pear and elm. Literal tons of the pear around. The sale of new trees has rightfully been banned, but still plenty out there for tree people as they tend to self-destruct. Turns like butter when green, then gets rock-hard and polishes up beautifully. Eventually turns a warm russet color, from a fresh pinkish salmon. Haven't yet found a way to chemically accelerate this process. Might give UV light a shot. Elm, though kinda plain, has the most wonderful texture in a finished bowl. I'm mostly over bark, but holly does hold bark beautifully for natural-edge bowls. As for crack filling, I've discovered that fine, powdery Scotch snuff works great with CA glue. Something in the snuff acts as a natural accelerator and boom -- instant cure. Though I'm starting to question the longevity of CA in general. Epoxy, also mentioned in these comments, is probably more stable. Beautiful bowl and excellent video, as we've come to expect.

[@tomislavtomasicwoodturning]

Thank you very much

[@whittysworkshop982]

Best working wood....... I haven't turned them yet, only used em with flat work; but Boxwood or Pear are the best working woods I've used 😁

[@tomislavtomasicwoodturning]

True,pear is another one great to work with

[@cobberpete1]

A very nice piece Tomislav. CA and Coffee Grounds fixes a lot of problems without trying to hide, but enhances the beauty. It's a shame so much is lost in the cutting to blanks.

[@JamesCouch777]

I use a lot of coffee and CA and coffee and 5 minute epoxy. Nothing else I've tried looks and finishes as good.

[@boooshes]

Halving the log while it is green and removing the pith in the process, then sealing helps to eliminate so many splits during drying.

[@racheldray1057]

That grain is really interesting. I was useful seeing you cut the log up first too. A very pretty dish

[@tomislavtomasicwoodturning]

Thank you

[@deedinky1]

Holly makes a very nice mock ivory for musical instruments such as pipes.

[@richardbufton3605]

Very nice Tomislav Holly will go silvery grey in colour when it gets older.

[@whittysworkshop982]

For anyone wondering; Tomi mentions about using the bandsaw the way you're comfy....... Usually we dony cut round stuff in that way. A round object can roll, as the blade spins it goes down into the table, this can catch a round piece and make it rotate. Because the parts we are cuttin are usually not perfectly round, if the blade makes it rotate the new kerf the blade is trying to cut won't match with the old kerf....... This can kink the blade (maybe break it) and can yank the part from your hands and towards the blade. Ya could have the crotch section facing the blade, this will help to stop the rotation of the part. As Tomi mentions; work the way you're comfy....... I've seen a round part being cut, it rotated and the lad nearly lost a finger, the cut went into the bone in a flash. Be safe lads, listen to your gut....... If you're gut is tellin ya somethin ain't right, then find another way. It could even be chocked up in a vice and cut with a rough handsaw. Not saying all this to imply Tomi is wrong..... When ya know what you're doin ya hold things a certain way and put pressure in certain places to anticipate what can happen. I just wanted to elaborate a little more on what can happen 😁 Tomi knows what he's doin.

[@changefortanzania]

I always use a sled to cut round pieces as I had one catch and break the blade. Luckily no damage to my fingers or to me personally, but now I try to be as safe as possible. It's difficult to grow new fingers!!

[@whittysworkshop982]

@@changefortanzania my background is hand tool flat work....... So all my blanks are chocked in a vice and cut with handsaws. I'm new to lathe work, but fairly versed with the use of machines, and quite proficient with hand work.......... I wouldn't dream of cuttin round stuff on a bandsaw. In a previous job, I was a "safety officer" of sorts, I would teach new employees how to use the machines, large industrial stuff........ I think me not wanting to cut round objects on a bandsaw is a leftover from my previous job, I wouldn't show others how to do that so in turn I wouldn't do it. My mindset is about limiting risk....... But, honestly; when ya get used to a certain way of workin it becomes second nature to do it that way. There's nothing wrong with what Tomi is doin, when speed matters (as regards a wage) then ya learn fast ways of doin things, and that's what Tomi is showin. For us hobby lads speed is of little concern....... That's why I wanted to elaborate. To show me lathe experience more; I'm still slightly "afraid" of it (only a 12inch 1hp lathe), and I've only made 4 tools, 2 boxes, and a bowl......... So dony see my words as someone who has time on a lathe, I'm a complete newb in that regard 😂 but, I know saws and other machines fairly well....... Cuttin round stuff can be dangerous to someone who lacks experience. A sled is a decent option, one of many options, as it limits risk 😁

[@valeriehenschel1590]

With experience, one can judge when the hand hold is sufficient, and when a jig or sled is the better way to cut. When inexperienced, always choose the safer option!

[@coskunturkoglu9740]

good job..

[@perrys5954]

That was a fun change, beautiful results to be sure! Thanks so much for showing that notch function in your scraper! I was a little surprised to see you cutting off such smaller pieces of the holly, do you do pen turning and such as well or to those smaller pieces get added to segmented projects?

[@tomislavtomasicwoodturning]

Thank you very much, I Usually turn small scoops or tiny needle cases, I don't like pen turning for some reason 😄

[@taysider01]

I've some holly that was cut down 3 months ago so next year before I use it. Just hope if it looks anything like yours I'll be really happy

[@tomislavtomasicwoodturning]

I hope so too,wish you good luck 😀

[@anthonyball2757]

Do you have an online store that I can look at? I really enjoy watching your videos.

[@tomislavtomasicwoodturning]

Its almost finished and up and running, just a few small things ... I'll announs it very Shortly

[@metodemersic]

10:46 "Tm tm tm" Nice wood.

[@tomislavtomasicwoodturning]

😄

[@timgooding25]

Hi again Tomislav, can you please tell me where I can buy one of your signature refiners please?

[@tomislavtomasicwoodturning]

It will be available on my website very soon, still working on website and bussiness side of things

[@tomislavtomasicwoodturning]

I'll announs it very Shortly

[@geraldmoore3686]

Tomislav, how large of a bowl blank are you comfortable turning on your screw chuck. I understand the quality of the wood will be a factor. I am not an aggressive turner like you, but I love to watch you do your magic. I bought me a dedicated worm chuck like you and Richard have and am really enjoying it.

[@tomislavtomasicwoodturning]

Good question,I have turned 16inch with that screw Chuck, a backer piece is important as well, put bigger diameter plywood or mdf and it Works to reduce screw as well..... If the wood is flat enough on the screw hole side it will hold up to 20inch with let say bigger backer without much issue....

[@SiMacKenzieWorkshop]

I got some holly from a friend. Wondering why it didn't look terribly white, I did some research - apparently to get the perfect white timber you need to kiln dry it immediately after felling or a characteristic fungus turns it to that greying off-white.

[@tomislavtomasicwoodturning]

Thanks for clarifing that, I was thinking why its not as white as it should be 😀

[@FRANKMANGIAPANE]

I hav a good amount of holly, some of it stayed mostly white , while some even developed a lot of blue streaking.

[@SiMacKenzieWorkshop]

@@FRANKMANGIAPANE fingers crossed some of my bits will stay white then 🤞

[@RayShaw007]

A thought; What haven't i seen from Tomislav Tomasic? Well . . . I don't think I've seen much texturing or spiralling (nor colouring/painting but that's a different matter!). Do you find yourself doing this when the wood and grain is plain (some might say boring)?

[@tomislavtomasicwoodturning]

Interesting question, I don't do much texture, but I do love nice color embelisment, but I try to do customers stuff first and then let creativity flow for stuff for videos or myself

[@alangriffiths2100]

I have turned holly and it is a very nice timber but we are talking about ease of cutting and consistant results then I think beech is the best timber but not the prettiest.

[@michaelogden5958]

Stinky wood. Not fun. I turned some green (not dried) elm a while back. It smelled like a portable bathroom at a football game. I managed to turn one bowl but decided the rest of the elm wood that I had cut would be better off far, far away. 😄

[@JamesCouch777]

I've turned a lot of elm and never noticed the smell. But most of what I turned was quite dry. Elm is very versatile and has nice grain. Might be a different kind of elm?

[@simonmorris-p7m]

Yeah that’s green elm, makes me keep looking round to see where the cat had an accident. It is really good for axles & rake backs, very resistant to splitting, currently making some parts for a ladder for the grandchildren with green elm just stripping the bark off.👌

[@zoki9264]

Daj frende malo na balkanskom jeziku... Nas edukuj, ostali sve znaju

[@tebscat]

Upvoted by an english speaker.

[@zoki9264]

@@tebscat ooo yeeees 👍

[@tomislavtomasicwoodturning]

Budem stavio glasovni prevod ko stari Bruce Lee filmovi🤣

[@tomislavtomasicwoodturning]

Imam par videa na Hrvatskom

[@zoki9264]

@@tomislavtomasicwoodturning znamo to, samo par videa.... dok je hrpa na engleskom. Daj malo patriitizma 👍💪