Husqvarna chainsaw won't stay running.

Links to products I have in my tool bag.
Compression tester. amzn.to/2NMgeze
Spark Checker. amzn.to/3bnXjmA
Tygon Fuel Line. amzn.to/3aCGntm
Carburetor Adjustment tools. amzn.to/3k7cgxe
Primer Bulb. amzn.to/3aCaKQA
Fuel Filter. amzn.to/2ZC0T7i
Visit our Facebook: / homegarage-10642735839...
Above are affiliate links which means we receive a percentage of the revenue made from purchasing products via those links.
Thanks for watching. This chainsaw stars but it won't stay running. Instead of tearing into the carburetor we're going to see if we can fix it by readjusting the carburetor.

[@ZombieDaveAZ]

Congratulations on showing the adjustment while making test cuts. Sooo many guys do not do this. Well done brother.

[@INSIDEHOUSEGARAGE]

that means a lot coming from you Dave. Thanks

[@eyeeyeful]

Totally agree with that comment . Probably the best demo I've watched. Got a right banger in the garage and lookig forward to working on it this weekend.

[@brianmik5624]

Bought a new Husqvarna. It kept stalling. Used this video to help me tune it and it runs/cuts like a champ. Thanks for posting this!

[@INSIDEHOUSEGARAGE]

no problem Brian Mik

[@pete194]

Thanks, now I know what specifically the L & H do. I face exactly this problem and used to tune them both without having a clue; and sometimes it worked! But now I'm going to try this again with all the info you have provided.

[@GrowingLittleCountryhomestead]

This was the best adjustment video I’ve seen. Doing it while cutting was key point. I had all the problems you showed

[@INSIDEHOUSEGARAGE]

thank you Growing Little Country homestead

[@davidharries3981]

You nailed it! Direct and to the point. No extra talking. A you tube video that is USEFUL. Thanks!!!

[@INSIDEHOUSEGARAGE]

Glad you enjoyed it!

[@710CAP]

It’s getting to where even if you take your saw to a saw shop, you still end up working on it. I would rather utilize a video like this and see if I can fix it first. Even if you just replace the carburetor, it’s cheaper than the labor you’ll pay to have it worked on. Thanks for the great video!

[@INSIDEHOUSEGARAGE]

agreed and good choice

[@weps2097]

Very well done! Clear explanations and great camera shots...answered my questions and got me thinking in a logical progression. Thanks for the video

[@INSIDEHOUSEGARAGE]

Glad it was helpful!

[@tirawy]

This video is by far the best I found on youtube; very thorough and concise. Thank you much.

[@INSIDEHOUSEGARAGE]

Glad it was helpful!

[@BIGPIE3333]

‼️Thank you so much for making this video, you just saved me a boat load of money 💰 by not having to take my Husqvarna to the shop & buy firewood ‼️ ‼️I made the timing & throttle adjustments on my 435 18" Husqvarna chainsaw because after 14 years of regular maintenance & running great, it started stalling when I started cutting, made your recommended adjustments & now my Husqvarna is running like new‼️ ‼️You can watch me use my chainsaw after the adjustments were made, on my channel after I post it tonight - 1/28/2023‼️ NEWCASTLE CALIFORNIA,USA 🇺🇸

[@INSIDEHOUSEGARAGE]

thank you Big Pie for letting me know you had success with the repair.

[@JLW1242]

It helped me greatly, making the idle adjustments while running the saw . I needed to see it done. My saw has been bogging down, now I know what to do . Thank you

[@INSIDEHOUSEGARAGE]

Great to hear!

[@heiser_bill]

This was very informative, thanks! To answer your question at the end, if it came to messing with the carburetor, float valve, I’d take it to an expert. 😀 But now I feel informed enough to try those initial adjustments on my own. I like your “if this, then that” diagnostic approach and tutorial.

[@INSIDEHOUSEGARAGE]

thank you Bill Heiser, I appreciate it.

[@massimoterenzi5056]

I would make my own adjustments...trial and error...you'll never learn unless you try. Thanks for another great vid!

[@INSIDEHOUSEGARAGE]

So very true. I used to be afraid that I would make a mistake and I have but I've learned from them.

[@massimoterenzi5056]

@@INSIDEHOUSEGARAGE my exact experience!

[@Rein_Ciarfella]

leonardo migot This type of carb does not have a float.

[@Rein_Ciarfella]

leonardo migot I don’t think you know what the heck you’re talking about.

[@williamgray9088]

This is the first and only vid I've found that addresses this problem. Thanks so much, perfect for a learning user like me! I recently found a poulan in my shed and want to use it as a carburator adjustment practice saw for when I eventually get something bigger than my MS170.

[@INSIDEHOUSEGARAGE]

no problem, thanks for the comment

[@JLW1242]

OK I ran the saw today and made a couple test cuts and made a little bit of adjustment. Used it the rest of the day. Thanks again, you have saved me much time on a good saw, that needed attention.

[@INSIDEHOUSEGARAGE]

Glad I could help and you did a great job getting it running too.

[@jonmace604]

Exactly the issue I have with same model of saw. Thank you for a clear, sequential solution to tuning the carb. Great video and helped me get my saw back to running smoothly.

[@INSIDEHOUSEGARAGE]

Glad it helped

[@markmills7643]

Thank you so much for helping people like me that really want to know how to take care of problems ourselves!!!

[@INSIDEHOUSEGARAGE]

no problem Mark Mills.

[@benjimcwaters7216]

I have the same saw having the same problem. Thank you for the video and the clear, concise explanation of how to make the adjustments.

[@INSIDEHOUSEGARAGE]

Glad it helped

[@joel_telis]

Rebuilt my whole carburetor and still was having these exact issues. Very helpful video! Thank you!

[@INSIDEHOUSEGARAGE]

no problem

[@Robert.420]

I have to say. Thank you. No one on u tube would explain the adjustment. I've cleaned and nothing i did the adjustment and runs fine now thank you

[@INSIDEHOUSEGARAGE]

Glad it helped and thank you Robert Vincent

[@elir9711]

I was looking to fix a certain problem with my saw and ended up finding the solutions for other questions I had concerning my saw . All in one stop , Thank you, great video

[@INSIDEHOUSEGARAGE]

thank you Eli R

[@dragonsmk1812]

I adjusted mine. It was new. Started, but lifting up or cutting chainsaw would die. Now it runs great!! Thank you.

[@INSIDEHOUSEGARAGE]

no problem and you did a good job adjusting it

[@martinalbert5653]

Logical, well thought out and calming demeanor. Thank You for your time.

[@INSIDEHOUSEGARAGE]

thank you for your time as well!

[@paulmassey6176]

After watching you do it I feel comfortable giving it a try. Your explanation was excellent.

[@INSIDEHOUSEGARAGE]

Glad it was helpful!

[@henrygrey346]

Excellent video! Exactly as determined by the circumstances. Logical sequence of fixing the issue.

[@INSIDEHOUSEGARAGE]

thank you Henry GREY.

[@nickspoor1744]

Thanks just what I needed... I cleaned the carbs from both my 141 and my 365 but had a hell of a time tuning both saws.

[@INSIDEHOUSEGARAGE]

Glad it helped

[@alexfher00]

Got to tip my hat off to you friend. A very informative and thorough video at that. I wasn't expecting the saw to "die out" under pressure (cutting the log), I thought it would work just fine. Thanks for adding that in. Well, I'm off to give it a shot. Thanks again!!

[@INSIDEHOUSEGARAGE]

no problem and thanks for the comment.

[@timsturgill3617]

I I have learned how to work on chainsaws by using videos on how to to the repairs I have all of the tools needed to do the repairs Still learning something new every I watch a Video I am very thankful that you fellas take the time to put these awesome repair videos it just as good as a Small Engine Repair Course I am very grateful to every one that puts these videos up I TRULY THANK YOU

[@INSIDEHOUSEGARAGE]

no problem and thank you

[@RavenLunaticLeather]

Great tutorial. I'm in the midst of adjusting mine now!

[@INSIDEHOUSEGARAGE]

good luck, hopefully you'll get it working right.

[@jamestoneryequestrian9130]

Brilliant and useful explanation especially the typing explanation as the saw ran. Thank you.

[@INSIDEHOUSEGARAGE]

Glad it was helpful!

[@A65Bill]

Many thanks for this excellent video. My Husky has this problem, so I'll try the lo & Hi adjustements & order a carb kit as well. I've cleaned the carb, air filter, exhaust flame arrester & fuel filter in the tank.

[@INSIDEHOUSEGARAGE]

hope it works out for you.

[@thomasjones1778]

Wow, just what i am experiencing. Your video gave me the confidence to do it myself. Thanks Boss!!

[@INSIDEHOUSEGARAGE]

Glad I could help

[@joompah7]

Wow. I gotta try this .... Thanks for being clear and consise and not holding the camera in your hand while you were filming. Great edit

[@INSIDEHOUSEGARAGE]

no problem

[@Emerson-gr8uc]

I've learned alot for being a new chainsaw owner. Had the same problem, cut a few times and it would quit on me. Awesome video and it was clear and concise. Thanks

[@INSIDEHOUSEGARAGE]

thank you Emerson Nolan

[@shmonsterman1356]

I will try and tune my own saw from now on . Thanks for sharing .

[@INSIDEHOUSEGARAGE]

No problem 👍

[@stevencarnes7790]

Best video I’ve seen one how to tune the carburetor on a chainsaw. Thank you for the great information.

[@INSIDEHOUSEGARAGE]

no problem and thank you

[@stevencarnes7790]

I do have one question I have a 440 and I’m not sure which tool I need to order. The 21 spline or the 7 spline tool?

[@INSIDEHOUSEGARAGE]

@@stevencarnes7790 the easiest answer is to buy the tool kit with several different ones. That way you can also use for your current and future machines.

[@funkyprepper]

Love this video. I'm new to all this. Thanks for explaining it the way you did

[@INSIDEHOUSEGARAGE]

Glad it was helpful!

[@benjamincrooker2533]

Nice work best video I've seen so far on adjusting a chainsaw and testing it out at the same time is awesome. I need to work on my Husqvarna and I can do this before I go ahead and take the carb off to clean or rebuild it. Thanks again you're the best. 🤗🇨🇦

[@INSIDEHOUSEGARAGE]

thank you Benjamin Crooker

[@slickymick]

Hi, thanks very much for your help I have a 130 saw and it was running everyday over winter. I put new chain on and saw was dieing at high revs. I have adjusted carb like you showed. Working perfectly. Thanks from a warm fire in Ireland 🇮🇪

[@INSIDEHOUSEGARAGE]

nice work and thank you for your time.

[@Bolero4me]

I have tried several approaches to adjusting the carb on Poulan Chainsaws, and can't seem to find a good setting. Your way of explaining it has helped me understand it better. Going to give it another try. Thank you.

[@INSIDEHOUSEGARAGE]

Glad I could help

[@PilotViewProductions]

Great job on the diagnosis

[@INSIDEHOUSEGARAGE]

Thank you

[@vk3zpg921]

Excellent visual presentation demonstrating diagnostic process, solution process and results.

[@INSIDEHOUSEGARAGE]

Many thanks!

[@jormond7266]

Great video. Clear instructions and video. Thank you.

[@INSIDEHOUSEGARAGE]

no problem

[@throughthegrace7893]

I'm having this issue with 2 brand new 120s. Thank you so much for the tutorial.🙏

[@INSIDEHOUSEGARAGE]

Glad it helped

[@foggydew646]

Great video, my Dad and I had the exact same issue and dialed in the fuel… Saw works great again… Thanks for sharing!!!

[@INSIDEHOUSEGARAGE]

Great to hear!

[@TechNACITYbjj]

excellent! Thank you! I'll look for your video on replacing diaphragm too!

[@INSIDEHOUSEGARAGE]

no problem

[@ILLDreams]

Yes after this video I would test this on my own saw. One thing you should say. That if you open the high end too much. You can and may blow the saw. If you have to open the high end that much rebuild the carb and save your self blowing the motor. This was a really helpful video. Thanks

[@INSIDEHOUSEGARAGE]

thanks for the tip

[@jacquesbissinger]

Very good explanation and demonstration. Thanks.

[@INSIDEHOUSEGARAGE]

Glad it was helpful!

[@jormond7266]

I am going to have another look at my chainsaw and have a go at this. Thanks!

[@INSIDEHOUSEGARAGE]

no problem

[@michelpaulcote156]

Very helpful. Husqvarna T435. First, it did not work. I cleaned the muffler. It was very quite blocked, spark arrester and all. After reinstall, I adjusted again. Works fine. Thanks.

[@INSIDEHOUSEGARAGE]

Glad it helped

[@thepar7575]

Very good video, tried it and help my chain saw improve performance. Thank You.

[@INSIDEHOUSEGARAGE]

Glad it helped

[@loubedoo2129]

Thank you for this informative video which explained the various aspects of throttle idle speed (chain moving), low and high speed settings. I have a Husqvarna 240 and it did that cutting out/dying thing day one right from the store. I did manage to get the carb adjusted myself and got it to work properly. Just wish I would have found your video several years ago! lol. Great job explaining everything and good camera work with everything in focus and not shaky or jumping around like in other videos. I saved this link for future reference.

[@INSIDEHOUSEGARAGE]

no problem and you did a great job working on your equipment!

[@jenncampbell8446]

Just wanted to say that I appreciate you posting this how too. I recently purchased a used Husqvarna 235e and it wouldn't stay running after a few cuts I received a ton of advice from friends, but none of it was consistent. The only common ground and cheapest fix was the carb adjustment. At first I was waaaay intimidated by doing this. From what I have heard it is easy to mess this up and have a hard time readjusting it, so I never thought I myself would feel comfortable doing so. Unfortunately, I had few people that sounded like thet knew what they were actually doing. I watched this video and felt confident and compelled to attempt to adjust it myself. Well long story shorter, it worked! It idled and ran fine untill high engine speeds, I simply turned the h screw one quarter turn counterclockwise to increase the fuel delivery at high engine speeds and it fixed the issue! I understand a little bit more and feel way more comfortable with two stroke engines and how to adjust their carburetors. Thank you for that!

[@INSIDEHOUSEGARAGE]

no problem and thank you Jenn Campbell.

[@teddd2009]

Yes, I would tune L and H settings myself. My chainsaw is older than yours so I would see about replacing the metering diaphragm, even if I got it running okay. Thanks for the tip!

[@INSIDEHOUSEGARAGE]

no problem and thank you for the comment.

[@arnoldreite1843]

Yes I tune all of my own small engines but I've learned a lot from watching your videos

[@INSIDEHOUSEGARAGE]

thank you Arnold Reite, and thanks for the comment .

[@mountainlife2411]

I will definitely do this myself. Super helpful video. Mine stalls when chain brake is applied.

[@INSIDEHOUSEGARAGE]

yes definitely give it a try

[@ScottysDetailing]

I feel very comfortable doing in myself now thanks to you. 👍

[@INSIDEHOUSEGARAGE]

Excellent!

[@therogers4432]

Yup. ^What ScottysDetailing said^ 😁👍

[@danielroncaioli6882]

That’s the exact saw I need to tune up. but I think I will rebuild the carb first. Thanks for the tips.

[@INSIDEHOUSEGARAGE]

Glad to help

[@pauleaton6908]

I'm going to give it a go myself as this video has given me the confidence that this Is exactly what my saw needs. Hope my metering diaphragm isn't caput!!!

[@INSIDEHOUSEGARAGE]

thank you Paul Eaton, and good luck with the repair.

[@ronnieevans2407]

Thanks this should save me a trip to the shop.

[@INSIDEHOUSEGARAGE]

Glad to help

[@johnwagner8465]

Your video is what I was looking for..thanks lots of information in it...I'll look at it several times and attempt to adjust mine...metering diaphram...diagram... might have to replace that...thanks so much for making the video

[@INSIDEHOUSEGARAGE]

Glad it was helpful!

[@jbplays7302]

I have a Stihl 026, which is basically the same as the newer MS260, and a Husqvarna 61. I have adjusted the carbs several times due to weather conditions, starting problems, etc. Your video was very informative! However, if the metering diaphragm on the carb is hardening why not just replace it, along with the carb rebuild kit. It's an easy task on most saws.They aren't very expensive. And, from my experience, once the diaphragms start to harden, the problem only gets worse. And sometimes you get a decent Chinese replacement carb, and sometimes you don't... The aftermarket carbs work better on larger 4 stroke engines. I've had much better luck with them on 5hp motors, like lawnmowers (particularly Honda lawnmowers, and pressure washers). These small chainsaw carbs are so finicky, the aftermarket carbs tend to be more trouble than they're worth, imo. One more helpful tip for your video: USE ONLY ethanol free fuel and good 2cycle oil on small engines!!! And ALWAYS run small engines dry before you put them up, unless you're going to use it again within a week of storing it (like lawnmowers, and weedeaters, during the summer, etc).. Otherwise, you made a great, Informative video!! Especially for those who are afraid of adjusting a carb!!! Kudos!!! Gave you a thumbs up, and subscribed.

[@INSIDEHOUSEGARAGE]

absolutely a great point. This video was for someone who wanted a second option to replacing the carb. If the adjustment works, and you can get away with it for some time, go for it. The same case could go for a transmission that was leaking and instead of fixing the leak, you just keep adding fluid till you trade the car in. Most people just want the easy way , which I can't blame them.

[@rudycorona6964]

wow that was awesome i kinda new how but now i know how alot better than i did because how you went step by step better than other stuff i have read or watched thank you

[@INSIDEHOUSEGARAGE]

no problem

[@davbing8195]

Hot damn, thanks.. been trying too figure out why it wont stay running 😕, you hit the nail on the head point blank my Brother... thank you sooo very much, i now have a working chainstick again..

[@INSIDEHOUSEGARAGE]

no problem and thank you Dav Bing.

[@davidkoskinen-hughes7655]

Fantastic, just what I needed to know, thanks mate👍

[@INSIDEHOUSEGARAGE]

No problem 👍

[@petedaly5063]

Great video. Going to try it now. Mine has exactly the same symptoms

[@INSIDEHOUSEGARAGE]

good luck to you.

[@Tmrfe0962]

Thank you, clear and concise.

[@INSIDEHOUSEGARAGE]

Glad it was helpful!

[@toddfromflorida]

Not sure if this was said elsewhere in the comments but I wanted to suggest that you really cannot say that the fuel had too little oil in it based on color these days. Today there are various oil manufacturers that make different colored oils (stihl and echo are two that come to mind) as well as all the pre-mixed fuels being different colors. Not saying you are wrong. But I would think it is pretty unlikely someone would know the oil content UNLESS they knew what oil (or premade fuel) the customer used and had enough experience with that specific combo to judge color. Thanks for the video. It was a good watch.

[@INSIDEHOUSEGARAGE]

yes you are correct about the Fuel color and mixture.

[@petesmit33]

Excellent and most helpful; thank you!!

[@INSIDEHOUSEGARAGE]

Glad it was helpful!

[@paulandmegian9139]

Thanks! low idle was my problem.

[@INSIDEHOUSEGARAGE]

Glad it helped

[@peterlbos]

Thanks for the info, I'll defo give it ago when needed.

[@INSIDEHOUSEGARAGE]

no problem

[@foo4895]

Nice video, way more to the point than most of them.

[@INSIDEHOUSEGARAGE]

Glad you think so!

[@gandelf57]

Thanks for the help I just got a brand new Husqvarna saw this morning. Mixed the gas with good quality 2 stroke oil so I knew it wasn't that. I had chain oil and the chain wasn't too tight. It started pretty easy. I warmed it up then shut it off and walked into the woods then it kept cutting out when idling. It slightly annoys me that the manufacturer would allow a brand new saw to be tuned wrong because not everyone has mechanic experience. But yeah the video was really helpful thank you.

[@INSIDEHOUSEGARAGE]

Glad I could help

[@davidgrubb354]

Nice and informative video. My near brand new Craftsman 18" that has ran for years now and then, but I would bet not a whole gallon of fuel has been through it yet. It looks very similar to this one. Last time I used it, I completely forgot to run it dry after pouring out any fuel in the tank like I usually do. Yes, dummy me. I know better, but still it happens. I needed it the other day for a small tree and found I could push the prime button several times, choke it, and it would crank up and run fine at high speed for several seconds, then die. You could prime it again and same thing would happen. Big bummer.. None of the lawn equipment repairs shops here say they will even try to repair a Craftsman. They say to just trash it and go buy a new Stihl for $189 plus tax, but they are 2" less on the bar cut. I just hate to throw away a very new chain saw just because it won't suck fuel out of the tank.... Their has to be something I can do to try and fix it. A friend said maybe the fuel line got clogged or has a small air leak that keeps engine from drawing fuel from its tank. A simple fix with new fuel line might work?? I'm not a DYI or mechanic on a lot of things except a computer network or PC I can fix most anything. Lawn equipment? Not so much. But why throw it away and not try something is my thinking? What do I have to lose by trying? Nothing but a little time. Since it runs fine on primer fuel, it still could be carb. adjustments needed like you did in this video. Maybe not. What you think is the best thing to check first and then later if that doesn't work? Joined your KZbin channel. I expect you will have many tips and DYI stuff for me in the future. Thanks for doing those. You can comment here or send directly to my email at [e-mail].

[@INSIDEHOUSEGARAGE]

thank you David Grubb. It's not that difficult to work on these, just like on network cables, label what you can and disconnect and replace them one at a time. replace the fuel lines and Fuel filter one at a time, then replace the carb for an aftermarket one. If you get stuck send me a pic at [e-mail] and I should be able to walk you thru it.

[@GervsAdventures]

Thanks for this information, i got the 120 Mk 2 and the chain keeps spinning. So now after watching this vid i got the correct answer i need to tune mine.

[@INSIDEHOUSEGARAGE]

Glad it helped

[@alexmarius4556]

I will do this first thing tomorow . Good video man !!

[@INSIDEHOUSEGARAGE]

Good luck and thank you!

[@waynemillar5115]

Thanks , it helped me tune mine.

[@INSIDEHOUSEGARAGE]

no problem Wayne Millar.

[@Qmedjoe]

just bought the 440 off a friend for $50, it wont stay running. Gonna try all this stuff and hopefully I can get her up and running! Liked and subscribed.

[@INSIDEHOUSEGARAGE]

good luck and thank you Qmed Joe.

[@johnmurray6943]

Very helpful. Off to try and adjust the H counterclockwise 1/4 of a turn...

[@INSIDEHOUSEGARAGE]

the H is for full speed adjustment, if yours is bogging down when squeezing the trigger, I would try the L screw first, then the H.

[@zacharybrindle5476]

I dont knownif its just me but this is the best video I have seen on this.

[@INSIDEHOUSEGARAGE]

thank you Zachary Brindle.

[@andershjen125]

Thanks so much! Very helpful! I was about to give up on my chainsaw before i saw this :-D

[@INSIDEHOUSEGARAGE]

Glad I could help!

[@artillerygijoe]

Very informative, thanks.

[@INSIDEHOUSEGARAGE]

Glad it was helpful!

[@hagman1077]

It must be a small world, as I have the exact same model chainsaw which I just put a new carb on and it does exactly the same thing as this one did when you started, so I really appreciate this video and Ill try this out and hopefully it will work out good. Thanks-

[@INSIDEHOUSEGARAGE]

no problem and thank you !

[@ryanconners1]

Great video, thanks !!

[@INSIDEHOUSEGARAGE]

thank you for the comment I appreciate it.

[@eddieengland9886]

Great instructional and I will definitely make my own adjustments. Thank you! 👍🏻

[@INSIDEHOUSEGARAGE]

Glad it was helpful!

[@r1deftone]

Well done. I like to do what I can myself. Not every tech is savvy and sometimes you're better off at least trying to fix the problems yourself. At the very least it's good to have some basic knowledge of how your machines work.

[@INSIDEHOUSEGARAGE]

thank you r1deftone

[@racerx250]

Thanks! My 235 needs some attention

[@INSIDEHOUSEGARAGE]

Any time!

[@suess15]

well done i will try this on mine tomorrow

[@INSIDEHOUSEGARAGE]

thanks and Good luck!

[@LifesLaboratory]

Very helpful. Thanks!

[@INSIDEHOUSEGARAGE]

Glad it was helpful!

[@ianryan9513]

Great video mate.

[@INSIDEHOUSEGARAGE]

Thanks 👍

[@ivanvalenz4713]

very well explained. thx. i feel confident to try now. thx

[@INSIDEHOUSEGARAGE]

Best of luck!

[@malikrameez703]

Nice carburettor tunning

[@INSIDEHOUSEGARAGE]

Thank you Malik motor mac.

[@calderatrek]

Wonderful video,.thank you

[@INSIDEHOUSEGARAGE]

Glad you enjoyed it

[@PatTheBaker855]

Good info. Thank you. my 435 is doing something similar to this but it could be anytime before it shuts off. I could cut up almost a whole tree before it shuts off or I could be a few cuts in and it would shut off. Will try fiddling with the carb a little to see if it helps.

[@INSIDEHOUSEGARAGE]

good luck with it, and don't forget about the tank vent.

[@charlessalard4636]

I tried it it worked thank you.

[@INSIDEHOUSEGARAGE]

Glad it helped

[@MrGattor33]

I personally would make my own adjustments. of course I do most of my own work on things unless it's too much beyond my own ability then I may need to seek out someone else to do it. Thanks for this great video!

[@INSIDEHOUSEGARAGE]

you definitely know your own skills. Thank you Rob Kercheval

[@MrGattor33]

@@INSIDEHOUSEGARAGE Hahaha thank you sir!

[@TheReviewPigeon]

Exactly what i needed. didn't want to bring it back to the shop again. Now if i can figure out why my bar nuts keep loosening in the cut and fix that i'd be solid

[@INSIDEHOUSEGARAGE]

you should be able to replace the studs and nuts, and if still get's loose, then the bar might be worn out along with the drive gear on the clutch.

[@gem7107]

Awesome video!

[@INSIDEHOUSEGARAGE]

Thanks!

[@timoneal9654]

Thank you. This is helpful. I was unaware of the high-speed mixture adjustment. Mine seems to work fine for about 20-30 minutes cutting and idling but then bogs out like you showed in your cut part of the video. After this I cannot get the saw to start at all. It starts the next time I choose to try the saw from fully cold beginning the cycle again. I have changed the plug figuring it fouled but it doesn't change the cycle. I was considering a possible ignition issue since I cannot see the spark with the plug removed but grounded. I will try these adjustments though. I did buy this new about 3 years ago and maybe have 10 hours on it.

[@INSIDEHOUSEGARAGE]

good luck too you but also don't for about the fuel tank vent as well.

[@richardbatman2558]

Great video, very helpful Thanks :)

[@INSIDEHOUSEGARAGE]

Glad it was helpful!

[@leebrech9616]

I have Husq 240 giving me same problems. Thanks, will try this.

[@INSIDEHOUSEGARAGE]

No problem 👍

[@Niafifia]

Thank you!

[@INSIDEHOUSEGARAGE]

You're welcome!