Install and testing of the Pulsar Tuning Module for 2015-2018 Ram 1500 5.7L Hemi Trucks

The Pulsar is an in-line computer that connects directly to the vehicle PCM, with no additional wiring harness. By connecting directly to the truck’s PCM, Edge has the ability to control the vehicle to optimize performance gains, throttle response, Multi-Displacement System (MDS) controls, mileage, and more. To make things even better, the Pulsar offers 8 performance levels that can be switched on-the-fly by using the vehicle cruise control “+” and “-” buttons on the steering wheel. The active power level (1-8) is displayed where the gear indicator shows on the dash. Pulsar installs in minutes and is the most exciting and innovative product on the market for 2015-2018 Ram 1500 Hemi trucks!

[@tigerbalmespresso]

just installed this and it makes my ram run like a champ on the fly, and surprisingly it gives me better fuel mpg than before even when I go through the levels.

[@phantom5185]

WOW, > I changed my Intake from stock to the [K&N Air Intake] + Scraped my stock exhaust, not that I needed to, but bolted on the [ Flowmaster 817690 Outlaw Series Cat Back Exhaust System ] and increased "Everything" deadly upgrade. Exhaust is slightly loud. Talk about gas mileage, it was great, now it's even better than it was when I bought it. (And I just ran into this, not sure what it will do for my truck, maybe well driving down the hwy it will strip the paint off the side of the truck? My too upgrades I bought on Amazon. Intake was $461.00 exhaust was $1,030.00 I mean for $1,400.00 it fucken flies. And it sound deadly, even better when pulling up next to a Harley-Davidson at the lights, my truck sound like 4 to 5 of them going of the lights. LOL!!

[@liankyson9161]

instaBlaster.

[@leobruneau6906]

Id love me one of those for my ram

[@josephmendez271]

What about unhooking the battery.

[@maldo72]

Anything for challenger charger guys??

[@jamescashman122]

how does this product work with bolt on mods ( cold air, cat back )? Can the piggy back adjust to it or does it need to be re-flashed?

[@turboboy0]

install starts @5:00

[@reedpafford]

does this work for the ram rebels?

[@gueroplatas1249]

Is it ok to pump 91 octane for the performance herd can creat a tick sound but the level shit recommends the 91 so little confused

[@mikelandrum4524]

Is this for ram 1500 only or will it work in a 2500 with 5.7

[@brian1355]

Left connector will not budge. Right connector came right off. Any suggestions?

[@Wimya]

Is custom tuning available yet? Im going to be installing catless headers that will require a tune.

[@phantom5185]

WOW, > I changed my Intake from stock to the [K&N Air Intake] + Scraped my stock exhaust, not that I needed to, but bolted on the [ Flowmaster 817690 Outlaw Series Cat Back Exhaust System ] and increased "Everything" deadly upgrade. The exhaust is slightly loud. Talk about gas mileage, it was great, now it's even better than it was when I bought it. (And I just ran into this, not sure what it will do for my truck, maybe well driving down the hwy it will strip the paint off the side of the truck? My too upgrades I bought on Amazon. Intake was $461.00 exhaust was $1,030.00 I mean for $1,400.00 it fucken flies. And it sound deadly, even better when pulling up next to a Harley-Davidson at the lights, my truck sound like 4 to 5 of them going of the lights. LOL!!

[@WHITETAIL215]

Can this custom tune your ram like if you get headers can someone tune this or you still need to unlock the ecu

[@stgraves260]

10 - 15 HP gain? Why does the product say Up to 30 HP? 30 HP at stage 8 correct ?

[@ryanbrown7703]

Will it flash the ecu

[@mayo8761]

Does this work on a 5.7 L 2500?

[@JohnARobinsonJr]

What's the difference between Edge Pulsar, Superchips Pulsar, and Diablo Pulsar? Are they all the same? Just asking, I'm looking at buying this product...

[@derekdauzat]

where can i fine the obd2 to usb update cable for it? also what will happen if you was to pick a level wile you are in park, reverse, neutral.. will it mess anything up? what if we accidentally set something thats not in (drive) on the gear selector knob? do i risk damage to ecu or transmission?

[@tigerbalmespresso]

I just installed this the other day and it works fine when you shift levels in park. I did notice that the number flashes a little when you shift in any gear other than drive, but it doesn't seem to mess it up at all.

[@jessicamora7815]

Does anyone know how to remove the tune ?

[@darkanchordesigns5906]

so you did a whole video on this on a dyno and did not show dyno results? Seems like BS to me. Great video. glad i wasted my time to see RPMs go up and down.

[@jrlegacy23]

That sounds like a terrible idea...… SMH

[@Randy2747]

I already have a pedal commander would this work with it? Or do I have to uninstall the pedal commander?

[@trigun890]

Why the fuck would you use a pedal commander?

[@erobins8352]

😂😭right

[@TB-gf1vw]

I just installed and on start up it said throttle position error. That has disappeared at the moment but there is a check engine light on and my cruise controls arent operating the settings???

[@SosaOnYt1]

T B same

[@ArmyStrong98]

Looks like my question will be ignored like the rest of them down there but I'll give it a shot anyway... Why is an update cable SOLD separately?!!

[@mitsured]

This question was also asked on their website and the answer was yes. Here is the link to purchase the cable. edgeproducts.com/shop/pulsar-obdii-to-usb-update-cable

[@ericferguson4114]

Can you change tire size's on here or adjust the top speed limiter?

[@1slashwylde]

Eric Ferguson no. Its not a tuner, more like a chip. Everything is preprogrammed with different power levels

[@stevekeelan5300]

False. You can change tire size.

[@Alexanderofthe9th]

Haven't seen anyone ask this yet but do I have to select the tune I want to be in everytime I turn the truck on again? Or does the truck stay in whatever tune you leave it in even after turning it on and off?

[@edgeproductsman]

The vehicle will remember the last setting

[@edgeproductsman]

@@Mdmoher what custom settings were you hoping to see?

[@brandonw3085]

can you still use your cruise control or will it start changing modes on the pulsar ?

[@josephmendez271]

Good question.

[@alew3555]

To use cruise control you just have to hit cruise on then the buttons control cruise. So yeah you can still use cruise control but my guess would be you can't adjust tune while IN using cruise control

[@jamesdoughty1522]

Can this correct the speedometer and shifting when installing over size tires?

[@edgeproductsman]

James Doughty it will correct speed yes.

[@jamesdoughty1522]

@@edgeproductsman awesome, thank you

[@setser1234]

Does this product remove the govener and let you go faster than 105 mph

[@fopm008]

Nope

[@kalebxxx18]

setser1234 I was going to ask the same thing.

[@carlosmlopez7428]

I could not get my connectors off. I lifted the levers and they still would not release.

[@rburdine23]

Legend says this mans connectors have yet to be released

[@mjljacobful]

Get a rubber mallet and beat the shit out of it... Trust me works every time!

[@andrewn5239]

There is a little gear like thing that the levers are supposed to catch on, most likely yours have become worn. Use a flat head screw driver and try to push the tabs down manyally without the levers. That is what I did.

[@yamran]

So if I remove this when I got to the dealer are they still going to know changes were made?

[@123tylerwebster]

Gray Thunder Anything done to the truck leaves a fingerprint on the PCM.

[@turboboy0]

if you remove the pulsar the dealer will not know. nothing in the computer was changed at all.

[@JadeDumpTrucking]

@@turboboy0 yea they definitely know the PCM has been tampered with, it's something they make sure they have the proper equipment to see if there has been changes. Almost like a set up to void ur warranty.

[@ervinzefi8662]

Do you make one for the 2019 Ram 1500 V6 Etorque??

[@eekenterprises]

Im moving mine to a new truck and lost the installation bolts. Are these available for purchase or can you tell me the specs on the bolt and washer I can acquire from my local hardware store?

[@conservativetexan2289]

Did you post this on the Americantrucks channel at well?

[@eekenterprises]

@@conservativetexan2289 I did not.

[@conservativetexan2289]

@@eekenterprises if you got the original bolts you can check the tread on a bolt thread gauge and get them in 3 inch

[@eekenterprises]

@@conservativetexan2289 i hit up edge and they sent new ones free of charge.

[@austinsguitardude]

Called Edge and they said m6x80mm with 1/4” washers 👌

[@adame924]

Will installing this void my factory warranty?

[@williamrichardleach8053]

Yup

[@raymondremillard7627]

Does it work on a 6 speed transmission ?

[@redbic420]

So how does the pulsar work with changing gears? Like if I wanna keep it in level 8 but wanna shift manually?

[@edgeproductsman]

You use the Cruise Control +/- buttons to change the power levels. If the cruise control feature is on then you can't change power levels. If the Cruise if off then you can adjust on the fly. If you are using manual shift when you change power levels it will display the power level for a few seconds on some models or show a small indicator number for Pulsar power level for a few seconds and goes away to display what gear you are in.

[@WhatevRization]

Does it remember your last choice after engine shutdown ? @@edgeproductsman

[@dsparks1049]

Does this remove speed limiter?

[@rokkero564]

Would it work on a 2013?

[@trigun890]

2015-2018. What part of that do you not understand? Jfc

[@turboboy0]

what part# do I need for my 2019 Ram 1500 CLASSIC 5.7, 8spd, 4x4? it should be the same as the 2018 right?

[@seanbickford1]

Did you find out anything? I have a classic as well

[@michaelpincavitch5245]

Classic is the same as an 2018 model ! No difference !

[@willcongdon114]

Is this any different than the pedal commander?

[@thomaspetito6923]

It looks like it literally does the same thing as the pedal commander

[@Backyardjackleg]

The Pedal Commander only changes the response of the accelerator but doesn't increase HP. This actually increases HP and torque as well as change the accelerator response.

[@dennismillus4581]

Will.it void any warrenties?

[@edgeproductsman]

Device can be removed from the vehicle at anytime, leaving no trace in the system.

[@ricardoboyd3371]

So this is a yes?

[@americancitizen4259]

MDS gives you uneven engine wear? Lol ok

[@Notyourgpasvett]

American Citizen when your dash says eco it’s running off 4 cylinders not all 8 in the gm vehicles it wears down the valve train at about 100k miles a had a Silverado that dropped a valve about then and I never beat my truck

[@15DurangoRT]

This is a scam. Show us dyno results and prove me wrong.

[@edgeproductsman]

You can go to this link and there is a dyno chart and more info on this product. edgeproducts.com/edges-new-pulsar-tuning-module-for-2015-2019-ram-1500-5-7l-hemi-trucks-and-6-4l-hemi-engine/

[@edgeproductsman]

edgeproducts.com/content/uploads/2018/02/Pulsar_S8a.png Dyno chart.