Installation of LED Headlight Assembly For Honda Gold Wing GL1800 2001-2018 Accessories

VEISUTOR LED Headlight Assembly Kit For GoldWing GL1800 01-18, LED Headlamp Front Lamp Replacement Set w/High Low Beam DRL Water Flowing Turn Signal Light For Honda Gold Wing GL1800 2001-2018 (2 PCS)

[@ronfriedman8740]

Great job! There's a good reason mechanics charge so much for changing those air filters on the Honda Goldwing! 😉

[@dudleygordon5483]

You did a Great disservice,,,,,,,, all that work and you hardly show the new Headlights ,,,,,or the difference of the lights,,,,, All you showed me is that it's alot of work You should have been more,,,,,,,....complete

[@charlesbaron7414]

Great video love the head lights. Should have change air filter just on GP

[@kennethchristmas6390]

The sensor was mounted to the back of the left headlight. It shuts off bike if it falls over and I found after installing these lights, the bike will NOT start without that sensor. Thanks

[@AnunakiAtlantis]

I prefer replace the bulbs with led light or Biled projector

[@timandedie]

Dude's adapter on that drill is bent and would drive me nuts

[@maverickb9465]

Most complicated installation.....rather save money and buy 2018+ if very keen on LED.......hats off to you

[@kennethchristmas6390]

HOW DID YOU MOUNT THE SENSOR from original lights to these lights?

[@CosmicTourist]

Which brand of LED bulbs do these use, and if required how difficult is it to change the LED bulb? Does it require the same disassembly as shown in the video?

[@veisutor4366]

Hello, this headlight is an assembly kit and the bulb cannot be removed separately. If there is a quality problem, you can contact our after-sales via Amazon. (You can refer to the installation steps in the video)

[@briancarlson1546]

So we loose the light tilt adjustment ? Are the lights pre lined up ? Thanks

[@jimmcgowin8780]

Yes you loose the tilt adjustment. DEAL BREAKER

[@Rockin-S]

They do If you buy good lights and not junk, motodynamic headlights have the tilt motors and are high quality

[@hadespaganism2405]

That's ridiculous to have to change the headlights to led !!! You have to disassemble the whole motorcycle. No thanks

[@owlexS]

Believe it or not, just to change the air filter, you have to remove 3/4 of what he did. (Unfriendly engineering) So if you turn your own wrenches and change your own air filter, just do them together.

[@workharddieproud]

Thats to change out the entire headlight assembly, not to change stock bulbs to LED. Big difference.

[@Rockin-S]

This is complete bullcrap, you do NOT have to remove everything this guy did, he has no freaking clue what he’s doing. There is a lot to it but not near as much as this guy shows

[@allanbaird2208]

@@Rockin-S Well then how much do you have to remove to get to all four of the headlights?

[@fooahhor826]

HOW MUCH

[@veisutor4366]

Hello, you can refer to the following link for the information you want to know www.amazon.com/dp/B0BS6FRBPL

[@tbonesz1]

Ok what about bulb replacement what size does it take and you should have shown the final look with lights on