Installing a Limited Slip Differential In Our Chevy Sport Truck - Truck Tech S1, E17

[@davect01]

I appreciate the honesty. $15k Budget Build is hardly "cheap"

[@cryoburned]

Or as he says if this episode.. "it wasn't a restoration, it was a paint job".. Lol

[@youcanbesmartaskhow3857]

To me a cheap fun truck is 5k and i guess 10k with shiny paint/ body lined up nicely.but compared to these all out restomods and price of a new sporty truck it's not cheap just affordable. And the one I had was faster w a jegs 290 hp 350, bell tech suspension. Yad yadda

[@josejuanrosales3614]

I'm better paying 15 grand than 75 grand for a newer truck

[@dreammerchant4442]

If one cannot afford! New tail light one would be amazed how some decent compound cleaner and a high sp÷ed buffer will bring those factory tail lights back to its original shine..just as clean as those new ones..

[@SDKwarrior]

yea they werent in bad shape at all just needed polishing

[@ChuckWood]

looks like they were sprayed clear

[@Channel-gz9hm]

The tail lights are $14 each anywhere online. If you can't afford that you need to stop trying to build a truck and get a job.

[@jonathonrossebo1783]

The Meguiar's Heavy Duty Headlight Restoration Kit makes a difference.

[@bri-manhunter2654]

Princip Warehouse. Savage!

[@Francis_Castiglione]

Anyone remember when Trucks! was hosted by Stacy David and that Mel guy?

[@AnDrEw122100]

Cain Marko yeah and it came on national tv on Saturday’s with reruns on sundays , I used to watch it both days when I was a kid lol

[@fiber9m]

@@AnDrEw122100 same here

[@hudsonhawk0016]

Wellhellhell, I don't miss the forced chuckle in every other sentence. Annoying.

[@adamp5825]

I MISS THAT SHOW SOOOOO MUCH

[@Francis_Castiglione]

Remember when they dropped an old LT1 into the S10 Extreme?

[@chubbysumo2230]

I remember these taking up a 30 minute time slot. think about that, nearly 13 minutes of ads to waste your time on broadcast or cable TV.

[@austindillard8936]

Usually it's more ad time now. When I was young it was 7 minutes, then 9. Now it's near 15 minutes of ad time.

[@rustyshackleford7265]

@@austindillard8936 Used to stick most of the commercials at the beginning/end of most programs too. Fuck I'm old

[@rustyshackleford7265]

@Lassi Kinnunen Yeah that's true too. Like a live action 18 minute ad for summit racing

[@Moparmaga-1]

Shit I know, hour long shows actually give up 23 minutes of show.

[@Quagigitymire]

LoL, you gotta see that dropping $15,000 into a truck worth around $5,000 isn't a very good investment so that money has to come from somewhere...

[@ViperSRTnACR]

Great results on the Chevy. Only thing I would have done is sand or blast the frame to get the rust off and hit it with some protective primer and paint.

[@bendover2405]

😢😢😢😢😢😢🎉😢🎉🎉🎉🎉🎉

[@flhusa1]

if you slightly touch the brakes or partially put on the parking brake both wheels will drive on a open diff. you learn these things when driving old tractors or pulling a boat up a wet boat ramp.

[@mickeyt107]

Love how the first episode they repaired the seals and changed the diff fluid. Apparently this build took a turn.

[@itstherightone5179]

This is a rich man channel!!

[@thejonathandoan]

Beautiful truck, and the paint job with the matte stripes is KILLER!

[@tomnekuda3818]

Ha! Two tire frier! Gotta love it. Doggone....as much as I like 9 inch Fords, these Chevy rear ends are nice to work on. Happiness is a tricked transmission....I shift-kitted a C6 behind a hopped 460 and I could not believe the difference. When I got rid of the truck after many miles it was still shifting super-crisp and the fluid was beautiful. I like 4-5-6 speeds but tricked automatics are nice. 383's never fail to satisfy.

[@kolebytolsma7206]

Lololol when a stock. Tbi. 180 crank hp blows them. You tend to lean to the 8in

[@bobowlowgrowing6387]

I put a Dana Trutrac Detroit in mine, made a hell of a lot of difference!

[@Ken19700]

If you're looking for a limited slip then a TrueTrac is the only way to go. No clutches to wear out, no special gear oil, and you don't even know it's there. It just does its job and lasts as long as a standard diff.

[@victorwang8623]

cant beat the look of a lowered truck

[@AutoDudes]

Victor Wang especially when it’s lowered juuust right 👌🏻

[@evilfingers4302]

Two Tire Fryer...I like that!

[@roccovw1]

As opposed to one wheel peel.

[@lanedavenport8036]

For 15k I could have a 8 second junkyard beast! Y’all crazy.

[@bmstylee]

Yes. And some of people prefer to not have something built from junkyard parts.

[@mkbassman222]

7:46 they spent 15k and couldn't even replace the cab mount bushings lol..

[@Thundarr995]

I think I'm gonna put something like this in my S10. I'm tired of getting stuck on wet grass when I go fishing. I usually bring an old pair of floor mats,just in case. I'm gonna buy the Torsen limited slip because there's no clutches to wear out.

[@Quagigitymire]

Dropping $15 k for 350hp worth of truck with a $5 k resale value seems a bit crazy unless you really love your old pickup and have a solid expendable income.

[@ianwalker8210]

Yea I agree, this is a weekend toy if I were to build one

[@Quagigitymire]

@Swampy Reality is nobody would build this truck outside of those who will use it as a means of generating income. This one was done because it was for the show that uses add revenue to profit. It's just absolutely ludicrous to drop that much for an underwhelming truck.

[@JumboJimbo100]

Man compare that to a brand new truck, I'd say it's a bargin

[@mariadelamora3614]

@@Quagigitymire LMAO bro then you don't know Takuaches

[@Quagigitymire]

@@mariadelamora3614 Not even gonna try and lie about having a clue what the hell a "Takuaches" was here. However, as I am not fond of ignorance, be it self-imposed or otherwise, I did look it up. After a good 10 minutes watching videos with "Takuaches" in their title I am now willing to admit I was wrong. Apparently, there is no short number of people more than willing to dump what may be their entire net worth into trucks of any make, any model, and apparently of any condition otherwise making said truck nearly worthless on the resale market. Maria, I did not know Takuaches, but because of you I now do. I still am not sure if I should thank you for this introduction into a world best described as a truck fetish...

[@timbowalk]

I love the truck been watching the show since i was. A kid but i gotta admit ya could of drooped a 5.3 with computer wiring harnes complete fuel injection system stroked the 5.3 for $2000 ported the heads added same cam grind on ls specs saved $3500 added a stock 4l80e with stall converter and completed the truck for about $8000

[@Wilson_Racing]

.012 backlash is a lot nore than I would ever run in my vehicles regardless of what it was before. My Hawks ring and pinion stated to run backlash at no nore than .007. The closest I could get was .006 which is better IMO

[@youcanbesmartaskhow3857]

too tight burns it up, little loose dont. But regardless that new gear has a spec . don't go by what your worn out shit was lol!

[@sandchar]

4:05 "These ring gears sometimes act like they're pressed on" because they are?

[@seabasschukwu6988]

BSMotoVlogs that was the joke

[@youcanbesmartaskhow3857]

no they arent. knock em off all the time.

[@Roboticgladiator]

Heat gun works great and you don't have to get the gears wet.

[@youcanbesmartaskhow3857]

@@Roboticgladiator yes or oxy torch from a foot away. Moving around.

[@SpaceGhost74]

You can get a 515hp turn key motor from white racing for 6k with the carburetor, you can keep that efi

[@andress1044]

And they say $15.000dlls is the low budget project.... well i forgot they get everyting for free, that's why they say is a low budget project because they don't put money out of their pockets.

[@MD-eu7mx]

Low buck sport truck, turned into high dollar hauler

[@ry6346]

Truck looks killer....box alignment is off a little but awesome looking all around

[@ajaymc6137]

Gotta be the coolest street truck for the money.

[@mikeo8179]

I like that “ two tire fryer “

[@Will_14_years_ago]

Love you guys but damn 15k isn't low budget. Most guys that own these are rural blue collar men I'd consider low budget 4 to 7 grand from start to finish tops. That being said you guys are great.

[@robertpickett6741]

Classic Chevy truck sport truck🥇

[@kunu98]

15g for a reliable truck isn’t bad. Cheaper than a new one. It prob gets decent gas milage now

[@nfshoodrich5114]

Price done went up now🤣

[@freekicknoob638]

Every cuhhz dream

[@dsiner1obslifedziner157]

0BS LIFE

[@JDnBeastlet]

Nice result, guys.

[@grabir01]

15 grand. That is a ton of money..

[@grabir01]

@@Welcometofacsistube There is no amount of money that can make any new GM truck reliable.

[@NVzla]

Being a Chevy guy, both of you are right. A Ford will live happily, even with no care.

[@josuepaz9446]

Dam all I see is hater's 😂 theirs a reason most of the old trucks you see are gm. And 15k for a bad ass muscle car like that isn't bad, y'all are just broke

[@jkelley8752]

Gm destroys other automakers in style that’s why you see them everywhere.

[@grabir01]

@@josuepaz9446 Broke is what you will be spending 15 grand on an old truck.

[@DRCrimeCircle]

Men i learn alot from this channel

[@joshqualls704]

Copied this build almost to a t...I found a 95 single cab short bed with 93000 original miles for $4000. Bought a 2.5 inch cowl induction hood for $400, and found a full set of xd rockstar 18x9 5 and a set of Michelins for $450(steal of a deal) then came the motor... we started with a 4 bolt main gm goodwrench crate motor rated for 300hp out the box and cammed it with a summit 1785 race cam,edelbrock 1604 carburetor on top of an edelbrock performer dual plain intake and a pair of mid length headers and bolted it to a 700r4 with a stall converter. Just under $10k.

[@HopsAndLead]

Wish it was just a stepside truck. Would look more like a sport truck

[@angelrs_0838]

Man that can't be a lowbuck build. Onestly

[@bmstylee]

It is is you are willing to get your manicure dirty and do some work.

[@becomeraptureready]

Your channels film style is my favorite. Very nostalgic and awesome! However is $15k on a truck like that actually even semi tempting? You could get a vehicle that would light your hair on fire for that, such as a beat and bruised Mitsubishi Evo X GSR to have fun with. 5000% more performance for the same cost

[@BigPoppa-Monk]

( Low Budget ) $15,000.... lmao

[@cryoburned]

Or as he says if this episode.. "it wasn't a restoration, it was a paint job".. Lol

[@itstherightone5179]

All a Sham!! You can clean those rear lights and make them look like new for $7.

[@MM7782]

Two German engineers at Audi just exploded when they saw the window doohickey install...

[@TinkerPrepper]

The truck looks awesome!

[@ZL1Dnero]

We're in good shape

[@johnderekmitchell1510]

I busted my pinion gear with a factory 350. No I never did any drop shifts.

[@uncleben4560]

I would buy it!!

[@robertfoley6430]

Cab to bed alignment sucks

[@allianceofsteel]

i cringed when i saw them put that glass into an untreated door, i don't think people realize all your weather runs through the door and through drains on the bottom, that should have something like bed liner, por 15, rust bullet , or at the very least paint in there keeping it semi rust proof... all that work restoring and you don't protect your work... doesn't' make sense to me.

[@brianwasmund7568]

You must have missed where he said its for mockup

[@starbattles1]

I put a LSD in my mustang and blew out the clutches first punch of the gas. Had that 1 tire spinning. Told the builder and he had me send it back. He sent me one with a detroit locker and dared me to blow that one out. lol... It's still in there today.

[@300zxdriver]

This is when a pickup looked like a pickup.. not a bus ..

[@djsgarage3626]

9:12 are we really gonna ignore that shity drift😂😂

[@aaronspicer949]

A cap and slide out system would make it a great looking service truck

[@Tampaboys]

Sick truck awesome stuff

[@theraven26780]

dang he knows his rear ends

[@romero.4089]

Low buck for me is hitting the good old junkyard for a 5.3 barely 6.0

[@brushlife9426]

Were in good shape

[@rockallen8436]

Perfect!

[@fryreartechnology7611]

My 2015 Jeep or 1991 Nissan Hardbody no power window... cool but the old school manuals and crank window are fun. (Got AC in both lol)

[@jonathonrossebo1783]

I'm surprised they didn't go with some sort of custom taillights with the clear outer lenses and red inner lenses.

[@norsevikingsir4932]

It takes about 15 minutes to restore those tail lights but when you have an unlimited budget for stupid spending, might as well waste your money.

[@allanb3222]

Those taillights are super cheap new though.

[@waynesworkshop7069]

Kind of like throwing money at an old small block instead of an ls swap

[@FernandezCycles]

WayneswheelsATX ATX I agree. A 6.0 with some 706 heads and a cam would have been cheaper and added way more power.

[@norsevikingsir4932]

@@waynesworkshop7069 Exactly, I don't get these shows sometimes.

[@Jenuin]

Love the video but I don’t have the tools or know how to do this properly. One day perhaps. :)

[@harleyhayes6527]

You forgot to grease the axle bearings

[@shane8911]

harley hayes ya I’m sure they didn’t put any oil in the diff

[@jkelley8752]

You guys are awesome got a new subscriber!

[@JumboJimbo100]

Thanks for the nice video, and great job on the truck i'd love to have that!

[@ceebee7707]

Nice Tetz. 🤐

[@Barkingmeows]

LS 5.3 or a Gen5 LT 5.3 would have saved alot of money

[@stoney2732]

This is an old episode. Wasn't an option when this truck was built.

[@fido139]

I have an idea for today's shiverlay trucks. Junk yard.

[@jonathanvanginkel3849]

If they didn't tally like robots it would be a mint show

[@adamp5825]

seems like if it had an operational tbi v8 leave it a cruiser? $7500 for a new engine & efi wow

[@andress1044]

And they say is a low budget project hahaha

[@davidwisner3292]

$15,000.00 is low bucks for people with to much money.

[@user-ol3ug1gb8l]

Nice World Rally Blue Paint job lol

[@blackericdenice]

You didn’t need the power probe to test the window. You could have ran the battery to the regulator.

[@jeffnorbert1871]

$15k? I'd buy 5 to 10 used trucks instead.

[@lospolloshermanos2692]

And then spend another 15k plus on top to fix repair and do general maintenance on those 5 to 10 used trucks....

[@andress1044]

And they say is a low budget project hahaha

[@jimthomas777]

Jeff Norbert , I did just that , got three of them , then I got a part here and a part there and now getting ready for paint , all are 350 small block 4 bolt mains, two are auto and one a 5 speed , I don't even have $4 grand in them , the paint isn't even $50 bucks a gallon , I'm using Industrial/ commercial tractor paint

[@chuckyloba]

Hey Power Nation what do you do with all the completed trucks?

[@Ken19700]

Some of them are their personal trucks.

[@400sbccamaro]

For 15 grand I could of made that alot stronger it seems pretty weak

[@robertweitlauf4653]

That's because everyone thinks the pile of crap 383 is the cats meow. Just build a damn 400.

[@400sbccamaro]

@@robertweitlauf4653 exactly what I did a 400 sbc with flat tops howards cam and ported stock 2.02 iron heads, headers and 650 dp and it would eat that 383s lunch

[@robertweitlauf4653]

@@400sbccamaro thank you. I received a 383 engine the guy (let's call him Fred)said never ran right and it had a ton of piston slap. The guy ( let's call him Hack) that built it used the short 400 rods on the 350 piston. Hack put in the pistons and the skirts hit the crank counter weights so he hack sawed off the skirts. Fred came to me I disassemble it that's when I found the mess that Hack created. So I built Fred a nice long rod 400 that will run all day and has 400 streetable horse power.

[@kidgokuxl]

I feel like I've seen this before years ago. Plus these guys haven't been on power nation for awhile.

[@94concours]

Kid Goku this episode is from season 1.

[@andress1044]

this episode is from 2014 6 years ago.....

[@1slow_obs]

Esa si quema cuhh!

[@memphisreigns1498]

I've watched this probably two or three times and it always bothers me when he's doing the window and he puts power to it to allow the window to go up but it doesn't go up all the way and it seems like it doesn't want to go all the way up but then he says and there you go like it's a finished product no it's not

[@thejkaz1]

New taillights seems like a waste of money. 5 minutes with some rubbing compound and a turtle wax shine would have brought those old lights back to new. I know I have done it many times to both headlights and tail lights and these lights were barely faded.

[@banthaboss6390]

That's the only type of power window conversion i have ever seen and installed. What else have you seen exactly? Gut the entire old window out or something?

[@Shreddiespaghetti]

15 grand isn't exactly what I would call "low buck" but I guess sometimes you gotta pay to play. Pretty sweet truck tho

[@jonasgrumby1093]

Kick it into passing gear Did you kick it yet

[@clevelandmaker386]

15k.......? only if the name on your paycheck is Apple? once again.....unrealistic build explained away !

[@andress1044]

And they say is a low budget project hahaha

[@kolebytolsma7206]

Its horrible. Paint is shit. And they fuckeddddd it up badddd

[@mariadelamora3614]

@@andress1044 better the new truck no?

[@josephbednarik5]

Needs cab mounts!

[@TBGaels32]

As much as I love these trucks, You can go wrong with one of these trucks by buying a 2wd truck but thats just me.

[@Coronet_shop]

power windows no thanks drains the hell outta my charging system...

[@bmstylee]

Maybe upgrade from 6v and get a real charging system

[@94concours]

The Coronet Shop sounds like you have a weak charging system! Upgrade time!

[@Coronet_shop]

@@94concours 12v but might go to a 14 or 16 volt battery

[@riskybiscuit5594]

Your alt should be producing atleast 13.4V at idle even for an old half working system. I'd reccomend an alternator rebuild.

[@starbattles1]

@@Coronet_shop LOL.... So you can blow out all your electronics? Or to just have the regulator cut it to 12v any ways? The proper fix is to upgrade to a higher amp alt. Get one 100 amps or higher and you'll be fine. Mines 160 amps but it also cost $500. A 100 amp will be about the same as the factory cost.

[@MrVg10]

15k and they couldn’t paint the tail light pocket. Talk about it’s all in the details.

[@Mxdevil3]

well thats funny but remeber it was a chip paint job

[@unclequack5445]

Limited slip will get you stuck.

[@howtobebasic2122]

GMT400

[@noone42069]

Bug spray can fix hazy light lenses!

[@rodneytatman449]

lilHamminator It's not a fix if it washes off.

[@tclott316]

No it won’t. Come back in a week and they’ll look even worse than before

[@thatruthhurts1670]

15k for something you can find on every corner

[@jelmore9898]

More Orange Peel makes it faster!

[@darrensoldan5972]

I'll keep my 96 Chevy stock looks better :)

[@ElevationBowling]

All that nice work and leaves the janky plastic bedliner lol

[@evanlb7]

They did a lot worse than that. We ended up with the truck and did a built LS swap and had to go back and redo everything they were supposed to do right.

[@justinstergar6757]

That’s a good looking truck. This coming from a Ford guy. 👍🏼

[@jacobybrundage1397]

All that work and the body lines still don’t line up.

[@watchingwatches2785]

Where the hell do u get a paint job for $700 not Maaco or Erl Scheib

[@thefakederekrufle]

I put in a true track in my olds.

[@bilbobaggins4710]

I love your car bro

[@zarkeh3013]

I don't like POWAH windows butt when I do, I like 'em slow. Those would be neat if a gear set could be swapped to desire for faster or slower window speeds!

[@youcanbesmartaskhow3857]

in circuit resistor

[@zarkeh3013]

@@youcanbesmartaskhow3857 not handy when it's cold out and the motor draws more current...