Installing a McGaughy 4/7 drop on a 2014 Chevy Silverado crew cab…

[@5cent27]

I’m a ram guy but most all chevys look so damn good lowered. 😮 cat eye, all 90s trucks, 07+, brand new body style, duallys, I could go on. They all look so good lowered.

[@trav_thesav_]

The way your kid chucked up the dueces ✌️ 😂😂 that was gangster. Backing with confidence. Good to know I can go lower with out c notching

[@NXT_LVL]

I remember when someone would say they had a 3/5 or a 4/6 drop you were that low or even lower and not able to run anything larger than an 28" tire without C notching the rear. Now you can do a 4/7 to make it level, and not need to C notch. lol

[@uncle.matts.ebikes]

Man , you did a great job on the truck and on this video

[@egnorthern]

McGaughy’s is pronounced Muh-Goy’s for future reference. Great looking truck. I have a black on black 2016 with a 4/7 drop. 😎

[@eduardovillafranco3257]

Just bought a project 14 Silverado and planning on going this route sweet video

[@25vrd48]

Truck looks great . Awesome video . I'm going to do a drop on a 2015 Sierra regular cab short bed . I've always liked McGaughy products .

[@jasonnellis3566]

nice bruh love your attention to detail.

[@glenntumbleston8735]

Keep them coming!

[@cheifortiz]

How much do you charge for a job like this? I've got a 2014 im currently looking to lower. Ive gotten a couple of estimates already. One guy wants $900 for the kit and $1500 for labor. Another place told me it would cost me 10 hours of labor at $115 am hour plus the cost of whatever lowering kit i decided to go with. In your opinion, Are these reasonable prices?

[@nickowens6950]

howd you get the driver side leaf spring bolt in without dropping the tank?

[@MrThe302crew]

Seen this guy before in los chikos

[@Wpbandy]

Hopefully I can’t fit my 24s on 305s without having to do nothing crazy

[@chriscollins5542]

hello i have a 2013 gmc 4x4 was looking at McGaughy 5/7 drop but the web site says it is for a 2wd truck i was wonding if you have ever done one or some direction. thank you

[@lowerclassfab431]

It will not work on 4x4s because the cv axle hits the spindle in the front….I have run into that a few times….IHC makes a kit that will work with 4x4s because it keeps stock spindles and changes control arms

[@AlbertoZepeda-jy8jz]

What size shocks for a 6” back drop

[@the_gm_power]

Excelente 👍👍👍

[@m3gam3ga_hammer34]

Could you fit 24’ wheels with this 4/7 drop but with a thinner tire without rubbing or having to cut anything?

[@lowerclassfab431]

Yes check out this video…we put 24s on it at end of video kzbin.info/www/bejne/lZaXeIWMgqqfpZo

[@timmharley]

where can i find the info on what control arm i have on my 2014.

[@lowerclassfab431]

Look at your control arms….if they are silver then they are aluminum…..if they are steel and you see welds on them then they are stamped steel….if they look like the ones on the truck in this video then they are cast steel

[@elcompatavo9365]

How Bad was the rubing on those tires ? Was it really bad or drivable ? , i like that drop and that tire size

[@lowerclassfab431]

It rubbed front and rear some but he’s still driving it to this day as is

[@elcompatavo9365]

@@lowerclassfab431 so im guessing its driveable , was the rubing on the top fenders or just the wheel well plastic ?

[@lowerclassfab431]

@@elcompatavo9365 was rubbing the firewall area part of inner fenders when you turn and would rub the bottom of bed wheeltubs on big dips

[@elcompatavo9365]

@@lowerclassfab431 oh i see, seems pretty ruff thanks for letting me know , yea i think i will go for a smaller tire, i just hate ruber band tires , i like a little bit of tire sidewall .

[@bajafishtaco]

Do the little ears that hold the hard brake line for the rear end have to be cut off? Or does the flip kit not interfere with them?

[@bajafishtaco]

Im talking about the little tabs that are welded on the rear end where the cradles go

[@lowerclassfab431]

On the McGaughy flip kit they do not…..but most kits you do have to cut those off and the flip kit has new mounts for the wheel speed sensor wire and brakeline

[@4klz]

Did you need the shocks to install?

[@lowerclassfab431]

Yes factory shocks are way to long

[@cristiansolis2688]

So you don’t need a c notch for a 4/7 drop?

[@lowerclassfab431]

No…you might get some bottoming out on very big dips but 99% of time you will be good

[@obslife1985]

Love the channel bro. I would definitely order a hoody if u ever make one that says lower class fab.

[@steveeeec12349]

Could I get the link to where you got this kit ?

[@lowerclassfab431]

www.summitracing.com/parts/MMC-34070/applications

[@lowerclassfab431]

This is the kit for the cast steel control arms….if your truck has stamped steel or aluminum arms you will need a different kit

[@jramirez1503]

Do you need a 2 pc drive shaft if you’re at a 7 in the rear??

[@lowerclassfab431]

No the 1 piece is just fine

[@jramirez1503]

I have a 2018 sierra crew cab, just making sure it’s not required.

[@hugososa1326]

Where is your shop located?

[@lowerclassfab431]

Baxley Ga

[@DanielMartinez-ir4pf]

Any idea what rims those are?

[@lowerclassfab431]

They are stock wheels on this truck….it’s like a “blackout” edition or something along those lines….comes stock with blacked out grille and stripes

[@squiggii4462]

Is this a 4wd?

[@lowerclassfab431]

No but I have lowered a few 4x4s the same way….just need to make sure the kit you buy includes spindles that will work with a 4x4

[@granadosx3745]

Bro ive been looking for a video to see how this things get done and you the first one that shows and explains everything 💯💯💯🦾

[@Pugsandhugs94]

What size bed is this?

[@lowerclassfab431]

5.5ft

[@Pugsandhugs94]

@@lowerclassfab431 do you know if the kit would work fine with a 6.5' bed?

[@lowerclassfab431]

@@Pugsandhugs94 yes it will work fine

[@jorgethebeast9433]

What’s the tire size?

[@lowerclassfab431]

285/45-22 I believe

[@viixiconik]

4x4?

[@lowerclassfab431]

This truck is a 2wd but they make kits for 4x4

[@SurviventheOnslaught]

lowered trucks look cool but for a daily driver everybody gets tired of the bullshit

[@lowerclassfab431]

Coming from someone who has daily driven a 2500 chevy on 37s for last 2 years I’d much rather climb into a lowered truck everyday…it’s a lot easier on my old knees than jumping outta that thing everyday

[@snooka2484]

​@@lowerclassfab431 That's why I went from lifted to a 3/5. So much easier. I slide into the truck now.😂