Some guys, like myself, often wire the light power source to the EAC "Electronic Air Filter terminal", on the brain board, thats Hot L1 voltage and the common or neutral line return, also on the brain board.....Light comes on, only if the blower is on...Good video.
@donsturtevant23962 жыл бұрын
Yeah but he said the light is controlled by the exterior on/off light switch and when the switch is on, the UV light will stay on 24/7…so you’re wiring is wrong
@vernroach34132 жыл бұрын
@@donsturtevant2396... Why would you have it on 27/7 if the blower is not running?...DUH...If hooked up to the EAC terminal it turns on when the blower turns on, either heating of cooling and only when the blower turns on...Why leave the lights burning while no air is moving and they're doing nothing...Do you leave your house lights on 24/7 or only when you need them...If you don't know how to do it, then don't...Just plug it in and let them lights burn and burn out...Leave all your lights on, but I'm thinking, in some cases, like yours, the lights are on, but no one is home.
@mitchc12632 жыл бұрын
@@vernroach3413 Hey Vern, you would keep the light on to bake the coil 24/7 and keep it germ free.
@vernonroach9182 жыл бұрын
You have the light close enough to bake the coil, kiss it goodbye...UV light can be harmful to many materials, especially with constant exposer over time...On 24/7 accomplishes nothing without air movement, other than shorter life of the bulbs and wasted electric...The unit is made to clean and sanitize the air, not the coil...Stay safe and Lets go Brandon.
@mitchc12632 жыл бұрын
@@vernonroach918 that's why we quit selling them... destroys flex duct and probably evap. Insulation... and yes let's go Brandon
@warrenstaben61662 жыл бұрын
Craig, so glad I found this channel. Great videos, no fillers, no bs, to the point and the best part fantastic music at the right volume and time. Well done sir!!!
@stroodles422 жыл бұрын
You win the award for best music for an HVAC KZbin channel
@kmadrid2325 Жыл бұрын
What a quality video! Thorough, yet concise, right on the money. So helpful!
@acservicetechchannel Жыл бұрын
Glad it was helpful!
@Rojs011 Жыл бұрын
@@acservicetechchannel 8:13
@SmokyRibsBBQ7 ай бұрын
I'm interested in putting this in my system. The only question I have is does running in heat mode affect or damage the light? My evaporator is above my heat exchangers like the unit you have in the video.
@jimmysegovia26882 жыл бұрын
the king of ac!!!! awesome video Craig thank you for sharing!!!!! you are the best man!!!!!.
@ishalljr2 жыл бұрын
Nice! Please do a video on the dual set up for the air handler. Thanks.
@bigbite98042 жыл бұрын
For best result... UV light before installation. We have to check the air quality. And we need to check the air quality again after the installation of the UV light. In this way we can find the difference in whether it is working or not. I did the same thing a year ago in Dubai
@beammeupscottsp79522 жыл бұрын
So what were the results my guy?
@dianekittle60002 жыл бұрын
What did you find in your compare?
@beammeupscottsp79522 жыл бұрын
Let’s say air quality is poor what measures are taken for improvement
@PIndyJones2 жыл бұрын
And the results were.....?
@beammeupscottsp79522 жыл бұрын
@@PIndyJones they never answer with concrete results #snakeoil
@Uglylizard662 жыл бұрын
Very Nice tyty. I understood before i saw video where the wire be connected to unit but wanted watch a Video showing to be 1000% sure. like always great videos tutorials.
@PubliusHadrianus2 жыл бұрын
nice tips, but i had some "oh, no, you're doing it wrong" moments, because handling the lamp without gloves and leaving fingerprints on it will actually shorten its life span. This is because oil in the greasy fingerprints will degrade over time and darken the lamp surface, it can even cause cracks in the quartz glass - the effect is the same as with halogen quartz light bulbs.
@sctony32 жыл бұрын
Unlike most other manufacturers lamps Fresh-Aire UV lamps can be handled when not lit. This is because they are made using high-quality hard quartz not the soft quartz found in inexpensive imports (handling soft quartz lamps may cause them to fail).
@joshl3323 Жыл бұрын
I was i aware to put it in the supply. I believed it always went into the return to reduce o3
@LEARNPROJECTMANAGEMENT2 жыл бұрын
Thanks so much Craig . Is it safe to connect the UV light electricity to the unit R and C .? Does the UV affect the AC unit life time or create any fire ?
@MrBababuwi2 жыл бұрын
As long as you dont overload the transformer, it is safe. However, it is crucial you check the transformer capacity before connecting to R&C, otherwise a dedicate power supply should be used.
@jkbrown54962 жыл бұрын
Another reason to put these on the supply side is it is far more likely to kill the biologics in the drier, dehumidified air where there is less water vapor in the way. Also, any biologics in larger water droplets will have condensed out with the water and ran down the drain.
@PIndyJones2 жыл бұрын
That explains the shit that gets stuck in there that looks like snot
@scsclassics2 жыл бұрын
Good work ! . You should show how to install a media filter box and filter next .Honeywell , carrier , Lennox ….ext. I just bought a Reme halo led and can’t wait to install it .
@Damian-ir8gn2 жыл бұрын
Thk I'm only three months in and furnace season kicking my ass
@richardweidner16257 ай бұрын
thanks for the mandatory minor key, four on the floor rock music during install
@logmeindog2 жыл бұрын
I always wonder how that small amount of activated carbon will do any appreciable good. The same goes with those thin activated carbon sheets you can slap over a filter. From what I gather, commercial installations use large canisters with 10's of lbs. of activated carbon.
@slackjawtomАй бұрын
This is great - thank you so much for this.
@jaguilar110092 жыл бұрын
Thanks for all your videos, they are very helpful, I will sign up for heating and air conditioning school good 👍 job thanks again 👏👏
@NorCal-refrigeration2 жыл бұрын
Craig just got this video and I’m subscribed. KZbin is glitching or something. I’ve had other content makers going through this as well.
@acservicetechchannel2 жыл бұрын
Yeah it is odd. KZbin is not acting like it used to in reference to algorithms, home screen, and up next, even when the notification bell is selected. It is always changing! Thanks for letting me know Dave! I hope all is well! Keep doing what you are doing! You're a great guy to follow and learn from for those who are hungry and seeking real world knowledge and skills!
@johnspitta67252 жыл бұрын
Our HVAC peeps just installed this in our plenum in our condo. I can actually see two vents glowing blue. Not the light bulb directly but blue light. I guess, indirectly. Is that a problem?
@grglyzen Жыл бұрын
This is what I'm also trying to figure out. Would also like to know of it is safe to replace the air filter while the uv light is shining on it from above. Is it safe to look at the air filter while uv light is being shined on it?
@Rojs011 Жыл бұрын
Thanks for the video. Made me start the research best light for my system. But I have a question, is it true that uv light is bad for plastic and can damage the drain pan?
@ptaweston2 жыл бұрын
Why do you need a dual version for an air handler? All of the air has to pass through the top part. No? What am I missing? Thank you!
@Dope_Digital2 жыл бұрын
Well, the air is cleaned but the light isnt going to hit the coil without the other lamp being at the bottom.
@donsturtevant23962 жыл бұрын
You need to watch the video again and this time listen. The light needs to cover all exhaust sides of the A-coil core. It’s function is to kill growth on the A-coil and should be on 24/7
@jaguilar110092 жыл бұрын
Please can you ,make a video of what is the proper way , to check the furnace before we use it, in the winter, I will be grateful for it thanks 👍👏👏👏
@fergify1989 Жыл бұрын
Great video, Im trying to install a second UV light but I am unsure how to wire the Packard multi tap. Do you have a video or would be able to help with wiring?
@erikizquierdo7130 Жыл бұрын
I had a question did you Pig tail the common wire to the c terminal couldn’t you just put the common wire in the c terminal on the board instead of putting a wire nut ?
@firstbadboy1 Жыл бұрын
Hi there. Thank you for sharing all your knowledge to us. I'm trying install a uv light to my system but I'm not clear on the power connection, you're saying one end on 24v R and the other on Common, I'm I right?
@7HEREALDON10 ай бұрын
Moved into a new build and started to notice a musty smell, company builder used to install HVAC came out twice and found no issues, both times the smells came back after a few days. Third visit they replaced the coils and cleaned the pan, I can still slightly smell it. I wanted to get a reme halo, but I've been getting conflicting feedback about it. Any advice? (I'm in need of clean air as I'm trying to regain my health from living in hidden mold)
@RC-Heli8357 ай бұрын
I have a flat coil! Should the light go on the in or out side?
@MegaRisenshine Жыл бұрын
Great video thanks for sharing… I just have heating furnace Ultr v tech 80…. Where to I installed the uv light??
@BackyardBeesNC2 жыл бұрын
Do those things really work with 1/2 second exposure to the air passing through?
@easkeybikes19662 жыл бұрын
That's why they work best with a snake oil injector on the return side.
@BackyardBeesNC2 жыл бұрын
@@easkeybikes1966 lol, I have 2 of em trying to sell, didn't install em.
@paulh39732 жыл бұрын
UV light will deteriorate anything it touches over a period of time. Wiring, insulation, anything plastic, etc. It will also build up a white slag on the metal. I wouldn’t install one based on what I’ve seen long term.
@caseyroberts95222 жыл бұрын
No
@nsudatta-roy81542 жыл бұрын
@@paulh3973 It makes a good up sell due to cv19 though. You should be able to sell a shit ton of these to businesses.
@andresdelgado56982 жыл бұрын
Craig, thanks for the exceptional video. I’m seriously considering an APCO X for my new 5 ton Heat Pump. The AHU will come with 10KW of emergency heat/strip heating. Will that impact my APCO X installation. I checked Fresh-Aire UV’s website for additional installation information but did not find anything. Thanks again.
@ronasaunders2 жыл бұрын
Andres, the APCO-X was designed and built in Jupiter, FL with plenty of heat strips/air handlers. The ceramic base, the hard quartz lamp, and the activated carbon cells can withstand any heat generated from the heat strip.
@jasonbengel2 жыл бұрын
Great info! I searched the thread, but didn't see anyone mention how UV can accelerate "photo-corrosion" of aluminum (for the duct work). I'm curious if the UV light should be placed in any particular location -- I imagine boring duct work with no electronics would be fine to be exposed to UV, but wiring and/or an evap coil might be bad around UV? I've found a few papers that discuss photo-corrosion by UV and aluminum is apparently higher on the list.
@bartwilliams44782 жыл бұрын
I just added a honeywell UV lamp in my goodman airhandler, The goodman handler has a knock out for UV and the V shaped evaporator has a knock out that places the uv dead center of the inside v shape which happened to be inverted in my application and is just above the airfilter so filter air is drawn through a filter then uv then evap then blower. The goodman knockout was 1/4 inch to small for the Honeywell mounting but larger enough for the lamp going into the evaporator assembly.
@bartwilliams44782 жыл бұрын
Looking up UV corrosion it seems that most testing was done under aqueous conditions not open air and was specific to aluminum specific alloys, I suspect the loss would be minimal otherwise HVAC manufacturers would have already changed the metallurgy of the materials had there been significant damage from UV
@michaelsera746 Жыл бұрын
Hello, Does the UV deteriorate the Fibrous Acoil insulation on the side walls. Also, Is a superior location inside the A(coil) ? Thx Much.
@nilborne12 жыл бұрын
Will the UV light deteriorate insulation in equipment cabinet? I have seen uv light ruin filters.
@RandysMixtable2 жыл бұрын
It will dry rot and strip the shielding on any and all wires within the system, none of them are rated or sunlight.
@ronasaunders2 жыл бұрын
All equipment from 2005 has UVC inhibitors in it. APCO-X is residential, and some contractors install commercial UVC, which will create these problems. Stick with products that are designed for residential applications.
@amio_roseto12 жыл бұрын
great video, will this lamp also work well on Oil Burner furnaces with a hvac Coil ?
@nsudatta-roy81542 жыл бұрын
It doesn't matter how your furnace combustion works.
@jarbarian10 ай бұрын
There is APCO and APCO-X. On Amazon I only see the APCO. Is that sufficient for a single level 3000 sq ft home? Also, would I need one for the air handler and the condenser?
@Rocket3576 Жыл бұрын
Great video! Have you heard of the Jumper King from Supco? It would be cool if you did a demo video on that tool.👍
@toolemanful2 жыл бұрын
Great video!!!! I there a video on installing a large bypass humidifier
@stickybandit2346 Жыл бұрын
There's pipes in the way on mine, but could I put it a foot higher?
@Reedgains11 ай бұрын
Super high quality video. Thank you.
@acservicetechchannel10 ай бұрын
Glad you liked it!
@norb231 Жыл бұрын
Why does the lamp have to be on 24 hrs a day? Not only when the fan runs?
@baderaltamimi872 жыл бұрын
You are the man! Can't thank you enough.
@angelofonseca8452 Жыл бұрын
Hello, Does the uv light deteriorate the insulated lining?
@Sandwebbspider2 жыл бұрын
Craig , is it ok to touch the bulb with your fingers ?
@Dope_Digital2 жыл бұрын
I wish you would have connected it to the additional transformer you had to show us how that worked. Ive always been told to add a transformer on these just incase.
@ronasaunders2 жыл бұрын
The 24vac does pull 16va...so it may be necessary to upgrade or provide a secondary transformer.
@joemartinez77652 жыл бұрын
How would you install one on a modular home down flow furnace with ac coil ?? Thank you.
@rando_webb87042 жыл бұрын
Been there done that, but my company uses the REME Halo.
@ronasaunders2 жыл бұрын
The APCO-X offers a Lifetimer Performance Guarantee. and the Carbon cells last forever without having to be cleaned every 3 months, like the product you sell
@georgecartwright51842 жыл бұрын
These are great videos and very helpful. Thank you for them.
@scotts41252 жыл бұрын
I have two of the dual units in my 2 systems. I had a really dirty coil on a 1 year old house. The installers put the filter in the stand the A/H sits on instead of the filter slot inside the A/H. The stand was open on 2 sides. Coil was a mess. Cleaned the coil with NuCalgon and installed the dual Apco's. I got the coil fairly clean but it wasn't 100%. Less then a week after the install and the filter in the correct place, the coil was spotless. It has been spotless ever since. I'm not sure if the black stuff was mold or just wet dirt but the light got rid of it 100%. I was a bit skeptical but I also wanted to be as safe as possible from the rona. I am sold on these. The sightglass is really not needed as you can see the bluelight on the part of the Apco that is attached to the duct. They have different levels of lights that go by how many years they last. I opted for the 3 year. In 3 years I will need to buy 4 lights. I have the main unit mounted pretty much like in the video but in ductboard. For the second light it's just the wire coming from the main unit to the bulb holder. They provide a magnet for the second light. I put mine in between the A coil. I also installed a transformer for each unit just for the lights. I don't have electrical outlets in the A/C closets. I wago'ed line voltage off the OEM transformer for the second transformer. Install is very easy.
@heatncool2 жыл бұрын
Very educational and helpful
@Panache-ml3kb3 ай бұрын
excellent
@andysmith97852 жыл бұрын
How long does this last and how often do you change bulb
@ronasaunders2 жыл бұрын
Lifetime on ALL parts, including the carbon cells....Lamp is 3 years guaranteed
@a11ten0712 жыл бұрын
Great Job as always sir TNX a bunch!
@jerrygrayson84212 жыл бұрын
I now have above A coil a humidifier thus I am told UV will degrade plastic frame of humidifier. Still I want uv light reaching A coil. Please make suggestions. I now have UV light in out flow plenum four feet from coil.
@jerrygrayson84212 жыл бұрын
The humidifier is an April air by pass unit
@arthurwilliams41602 жыл бұрын
Please put more install videos Thanks
@KINGPAFA2 жыл бұрын
Thanks, I only work on Refrigeration equipment but I always watch your videos, It would be nice if you could make another video on pressure switches and explain it a bit more, I think the previous video on pressure switches was a bit short! Thanks again and God Bless.
@geoffreyhoffman27392 жыл бұрын
I got quoted $1,200 to install one of these, Mesa AZ. Is that normal?
@tphvac872 жыл бұрын
How do you feel about air scrubbers?
@Twoface02332 жыл бұрын
Craig, are you involved in new construction by any chance?
@leestebbins5051 Жыл бұрын
What is a ballpark figure for an installation?
@tunaman22002 жыл бұрын
Excellent! Thank you
@sharmahw9 ай бұрын
Hello Craig. I tried to reach you re getting FreshaireUV installed in NJ. I can't find a contact number on your website. I emailed on the address listed but never heard back. If you don't do installs can you please recommend someone in Somerset NJ area? Do any other viewers of this channel know a FreshaireUV installer in central NJ area? I need to install in 2 homes. Thanks much all.
@acservicetechchannel9 ай бұрын
We are only doing the HVACR education and don't know of contractors in that location, sorry.
@RandysMixtable2 жыл бұрын
Side note, don't install these where the uv light will hit any sort of wiring inside the system or by blower, just had a system pop a breaker because the uv light stripped away the shielding on the high voltage wires.
@hvacpartspros92752 жыл бұрын
You can purchase UV coating UV protectant wire chases it’s very in expensive a box of 50 or 100 feet is probably 30 bucks
@ronasaunders2 жыл бұрын
All equipment from 2005 has UVC inhibitors in it. APCO-X is residential, and some contractors install commercial UVC, which will create these problems. Stick with products that are designed for residential applications.
@darnellfisher41482 жыл бұрын
Thanks for the video!
@petekane25012 жыл бұрын
Great information & review
@frontiermarvin712 жыл бұрын
Exactly what I need it ! Thank you .
@butlerstouchHVAC Жыл бұрын
what sheet metal cutter is that? please reply
@Review-This2 жыл бұрын
Why not run it on the 24V green so that the customer can run it with the blower fan on or fan circulate so that way the UV isn’t always on consistently? I know with the ozone cells if it’s on consistently the ozone will build up in the Plenum boxe and over whelm the customer with a hydrogen Peroxide type smell.
@Froggability2 жыл бұрын
Agree. The lamp has life span of so many hours, customer never notice if the lamp died
@jkbrown54962 жыл бұрын
@@Froggability Actually, discharge lamps are limited by on/off cycles. It is the startup that is hard on them.
@scotts41252 жыл бұрын
Manufacturer recommends light stays on 24/7. Bulbs are rated how long they last based on 24/7 usage. Mine are the highest rated they offer and will last 3 years. My above post will tell why I was skeptical about these and became a believer. I set a reminder in my phone plus wrote the install date on the sticker they give you to replace the bulbs. If you are changing the filter every month you should be seeing the sticker on the A/H.
@michaelengel91622 жыл бұрын
Mold grows 24/7 and on/off shortens the life of the bulb. APCO-X is ozone free and H2O2 free so those "products" require to cycle on/off with blower. The only biproduct of APCO-X is clean air
@ronasaunders2 жыл бұрын
@@jkbrown5496 YES!
@tomman17182 жыл бұрын
why is it necessary the light runs 24/7?
@hoopie10222 жыл бұрын
Thank you !
@chesstime3562 жыл бұрын
Very nice thank you
@dfigueroa9032 жыл бұрын
Can you install this in a furance supplying only heat only
@ronasaunders2 жыл бұрын
You can, but be sure to move air across all filters/uvlights/carbon to help with air quality when no calls for heat come in.
@wowmenso Жыл бұрын
Nice info
@OthmanAlikhan2 жыл бұрын
Thanks for the video =)
@chada472 Жыл бұрын
Big air flow restriction!
@deanmartin19662 жыл бұрын
Great video Craig.
@Review-This2 жыл бұрын
The Reme Halo LED is so much better. In my opinion
@ronasaunders2 жыл бұрын
Be sure you ask them for their studies....the original protocol. I think you'll find many products are tested in a shoebox. And the APCO-X is guaranteed for life, with just a 3 year lamp replacement required. Does your IAQ product offer that guarantee to you and your customers?
@UnconsciousCompetence2 жыл бұрын
Installing a UV light inside the air handler cabinet seems like poor practice to me. I have seen several cases of a UV light inside an air handler cabinet breaking down the electrical wire insulation. The wire insulation eventually turns into powdery whitish dust. Prolonged UV exposure is no joke!
@revealingfacts4all2 жыл бұрын
Agree. It also breaks down the drain pan. The bulbs are expensive to replace too. And in all my years, I just never seen where this was even necessary to install.
@ronasaunders2 жыл бұрын
It is true, you are turning your customers air handler into a disinfecting device, so be sure to follow the manufacturers recommendations in the manual.
@ronasaunders2 жыл бұрын
@@revealingfacts4all If you consider portable air purifiers with 5 cfm blowers cost $3-500 each, and cover a 10x10 room, a whole house system is a no brainer for you and your customer. And these lamps last 3 years, guaranteed. The whole APCO-X offers a Lifetime Performance Guarantee. Just install it per the manufacturers specs.
@PhillipDonohue Жыл бұрын
wheres the package units?
@stephwaylonwells32182 жыл бұрын
👍
@techfive72022 жыл бұрын
Cant emphasize enough not to look at that light more than a second. Not even that if you can avoid it. It'll burn your eyes and you'll have thousands of tiny blisters on your eyeballs. When you blink it will pop the blisters. Your night will be absolutely miserable.
@ronasaunders2 жыл бұрын
YOU ARE CORRECT SIR
@rebecca28275 ай бұрын
Thank you
@SupaTrendingDaily4 ай бұрын
Yup, it literally cooks your eye
@varandavakian2 жыл бұрын
👌🏼👌🏼👌🏼👌🏼
@NES0882 жыл бұрын
I heard that UV lights will shorten the life of plastic drain pans...
@Froggability2 жыл бұрын
Any plastic include cabling and paper labels
@ronasaunders2 жыл бұрын
All equipment from 2005 has UVC inhibitors in it. APCO-X is residential, and some contractors install commercial UVC, which will create these problems. Stick with products that are designed for residential applications.
@garza76762 жыл бұрын
Get video but the background music is super annoying . Tell your Audio guy to mute it . Thanx
@DaiPheo2 жыл бұрын
*Chào bạn,Mình đến từ Việt Nam,cũng làm nghề điện tử,điện lạnh,mong dk giao lưu học hỏi các bạn*
@Blockdagdaddy2 жыл бұрын
Mine didn’t come with an insulation mounting kit. How should I mount it? I really need it in the insulation above the coils ?
@leonardomanon8107Ай бұрын
Blablabla
@darriendelossantos3958 Жыл бұрын
Jesus crisis he did that so manly
@realestateservicessaleshea992 жыл бұрын
My only question is,how did we survive without all this crap?🤯 🍺🍺🍺🥃🥃🍿🎯 Stay safe. Retired (werk'n) keyboard super tech. Wear your safety glasses!
@roberts11592 жыл бұрын
Just checked the cost for 120v unit, about $460. No thank you!
@wholeNwon2 жыл бұрын
Many didn't.
@srobeck772 жыл бұрын
capt obvious guy: human lifespan has gone up 2-3x longer in past 100 years.
@realestateservicessaleshea992 жыл бұрын
@@srobeck77 pal 🤣 there hasn't been that many uv lights sold in the last 100 years to contribute to any increase of life expectancy. 🤣🥃🍺