Installing An Engine Guard And Frame Sliders On My Rebel 500! (T-Rex Racing)

"It's not IF you drop your bike, it's WHEN!" That's what they always say right? So why not be prepared for the inevitable by installing a proper engine guard and frame sliders on your Honda Rebel?! I went ahead and installed some from T-Rex Racing on my Rebel 500 and am in love with them so far! They're such great quality and offer so much protection, it really is a no brainer. They're even compatible with both the Rebel 300 AND Rebel 500. Now let's just hope I never actually have to put them to the test!
Check out the T-Rex Racing Exhaust/Frame Sliders here!- amzn.to/3i6lZ5R
Check out the spacer I used for the left frame slider here!- amzn.to/3ezNUJ6
Check out the T-Rex Racing Engine Guard/Crash Cage here!- www.t-rex-raci...
Thanks for watching, and be sure to follow me on Instagram for more daily stuff! @Life.Of.Burch
Check out my other motorcycle videos here! • Motorcycle Videos | Li...
Support the channel by purchasing through one of the links below!
v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v v
Rebel 300/500 Radiant Cycles Shorty GP Exhaust- amzn.to/2Yb8hqw
Rebel 300/500 Passenger Seat/Foot Peg Kit- amzn.to/2TAg2TW
Rebel 300/500 T-Rex Racing Exhaust/Frame Sliders- amzn.to/3i6lZ5R
My Camera- amzn.to/36ZQiEY
My Microphone- amzn.to/2oP438K
My Gear-
Helmet- Bell Qualifier DLX with Transitions Face Shield amzn.to/2ABebaN
Jacket- Joe Rocket Phoenix Ion amzn.to/370ZXfm
The song during the install clip is No One Understands by Make Major.
Check out Make Major on Spotify here- open.spotify.c...

[@melvaattheriverbank]

That was a very explicit video. No more talk than needed. Very clear instructions. Well done. I think we need a T-Rex Frame Slider for my wifes Rebel 500.

[@99cflores]

Lovin the Mods Burch, keep em coming. Also can't wait for some wheelies on the Rebel !!!

[@LifeOfBurch]

Thanks bro! Wheelies incoming soon enough! 🤘🏻

[@g1nk0]

I don't have a bike, but I'm almost absolutely gonna get the 500 if I do end up getting one, and these videos are super helpful, cuz I have no clue what upgrades are good

[@LifeOfBurch]

I’m glad my videos are helping! Thanks for watching! 🙏🏻

[@Eatamababy]

I just installed these on my Honda Rebel 300 about a month ago. LOVE EM ❤️! Just wish I had installed sooner before umm dropping my bike about three times & denting the gas tank 🤦🏾‍♀️. Love the orange on yours 👍🏾 that’s awesome. Wonder if there is a funky neon green color or maybe I’d have to paint for that. Who knows but great channel 📺

[@LifeOfBurch]

Ahh man sorry about your tank! There is that hi-vis yellowish color that came on the 2017 500’s. That’s probably the closest to neon green that came factory.

[@jeffreyhogueison8560]

Same here. Additionally the bigger T Rex guards are worth it to save your leg from being torn off.

[@msvalina007]

Saved this video! So have to get these when I get my bike. Also like that you can rest ur feet on the guard on long rides.

[@chantysom9255]

Thanks for the tutorial Burch! Just ordered the cage and sliders from your link. Can't wait to install them and see how they look and feel on my 2017 Rebel 500. 👍🏍

[@carlosf.bretherton1769]

I've tried to purchase the same crash bars from the tutorial but the link won't take me anywhere...........How did you find them?

[@neforium7441]

Have a 2019 rebel myself and have been looking for some sliders for a minute. Super glad you made this video dude!

[@LifeOfBurch]

Glad it helped you! 🙌🏻

[@KKSlidersBro]

Definitely saved this into my moto playlist! Loved this video

[@LifeOfBurch]

Glad it helped!! 👊🏻

[@RelentlessEpicness]

Links are not working anymore

[@montywoodley6357]

Do you simply was simple and easy to understand. But the most important thing what do you torque the bolts at or the engine guards. Tighten them all the way down. Was easy to say but what was the torque on the bolts.?

[@MattRhodes_Music]

Where did you get the orange tank?! Debating selling my CRF250L for a Rebel and imagined building one to look like this basically

[@jaybosher6144]

T rex makes good stuff, saved me before and allowed me to ride home instead of a tow.

[@LifeOfBurch]

That’s what I like to hear! We all hope we’ll never need it, but it sure is nice to have it when we do!

[@jaybosher6144]

@@LifeOfBurch I say the same thing to my idiot friend when starts looking at the price instead of the quality of gear

[@dinospumoni8860]

The Amazon link to the spacers doesn’t work anymore. Anyway you still know the info for them? I just ordered the cage and sliders for my rebel 300 to do the same set up as this.

[@mikehunt7480]

I just bought the trex racing center stand. You should get one and do an install video 🤔

[@LilGrimey5Star]

Will definitely be getting the cage, I’m about to buy my first bike too 😊

[@stephengriswold8545]

Can you drop a link for the shorter engine guards you bought first?

[@bshocks]

Can you rest your feet on these for longer trips almost like forward controls?

[@capsizedink7888]

Do you have updated links for the frame sliders and the spacer you used? The current links are invalid and I'd gladly use an affiliate link to buy!

[@x-ray3431]

Lmaoooo

[@KazeAkiyama]

Any luck finding the spacers?

[@horsedude01]

The hex bolts on the left side for handle for sure were put on by Thor with thread locker. I stripped both of the hex heads trying to get them off and they are still not off.

[@alexandreapereira414]

I just spent an hour trying to carefully get them off with no luck!!! Did you ever get them? Lol

[@horsedude01]

I never could get the bots out. They used thread locker to put them in. I even used heat to no avail.

[@DopeboyDanny]

Hey man! Tried to order the sliders and spacers but the links no longer work. If you can update them and let me know I’ll buy them using your affiliate link 🤙 btw Love the videos, keep up the great content

[@Wam1999]

I have been trying to wheelie my rebel for so long, can't wait to see your video on it and any advice would be great!

[@LifeOfBurch]

It’s definitely not the easiest! I’m hoping to start making the wheelie videos soon though 👌🏻

[@horsedude01]

Where did you get the handle for left side. I ordered one from RevZilla, but it does not have holes at bottom to attach slider?

[@gc6854]

Excellent explanation. Difficult to remove bolt for slider....

[@RelentlessEpicness]

Quick question. My Rebel only has one of those exhaust arms where the sliders goes on on the right side (I’m assuming as it it should). What do you call those? So I can order one for the left side. @everyone. Thank you!

[@panagisfoteinopoulos7098]

Hello, and thanks for the video! What you do is really super helpful for all Rebel riders! Question: Can you put an exhaust slider in the Rebel 1100 as well? Because I see that it does not have a place for it to be screwed on, like the 500 has. Do you have a fix for this, please?

[@JediFOMO]

If I go into a sharp turn will it catch on the ground ?

[@jaytam1522]

Hey I know this is old upload but I’ve watching ur vlogs to add the mods.. I installed the T Rex frame slider above the exhaust but I don’t see a bracket for the frame slider on the left side.. this is a new bike that I bought a month ago… is it normal for the bracket on the left to be missing or have I been duped by the dealer?. Would appreciate feedback from all and thank you.

[@Lliamhd]

So what accessories did you have to get for the back to mount the sliders?

[@chrislaws4785]

What if you dont have the passenger foot pegs for the left side of the bike?

[@kennethrich5475]

Hey just a heads up! The spacer link is either broken or the product is no longer available. I just ordered a set of sliders and the cage but realize now that I can only use 1 of them now

[@AyipKuat]

Thumbs up for that thumbnail picture. 👍👍

[@LifeOfBurch]

Thanks! You should’ve seen the look on the face of the cop who pulled up as I was taking the picture 😂 He thought I had fallen and I was like, “Nope, just stopped for a quick picture!” Haha

[@T1NYT4NK]

Love your videos! Hoping to pick up my 2018 500 today. Have you tried to use that engine guard to rest your feet on longer rides? They look like perfect highway bars, lol

[@ferencs.harmat7049]

Can someone please answer this lol

[@faztang]

@@ferencs.harmat7049 that was my question too! Save me some money on forward controls!

[@gregorytracy3512]

How much wider is the bike now vs stock width?

[@gameplaya2002]

I have a question. When your doing those sharp turns where the bike has be low on one side. Does it skid on them ?

[@intisabahmad6046]

The spacers link is not working, can u please update that?

[@Justin-tp3lr]

What would you recommend for the 1100? I'm looking at picking one up as a beginner bike and ride around in rain more for awhile. It looks like the frame sliders use the top mounting hole for the shocks.

[@jayrock81]

Sup Burch , question. So the exhaust sliders , you must purchase 2 correct , they only sell them as a single item ?

[@cameronsterling3446]

can you still buy a replacement orange honda rebel tank aftermarket?

[@Supreem6969]

Hey buddy I enjoyed watching your video...I have a question I have a 2009 kawasaki vulcan 750 and for some apparent reason they dnt sell crashbar or engine bars for this bike..what do I do next??

[@jasonwilt6681]

Hmm... 🤔🤔🤔 I've never considered putting an exhaust slider on the other side of my bike. Makes a bunch of sense. Thanks for the idea!

[@dalegarrard9446]

I have a 2021 509se. Will that crash bar fit? Their web site says only through 2020

[@patklaus2237]

Burch, do you have any idea of model type of engine guard for the 1100? Patrick from The Lou (St. Louis)

[@brendandandlisa5567]

Good work Burch Boy...

[@LifeOfBurch]

Thank you!! 🙏🏻

[@jeffshootsstuff]

Very helpful. Thanks

[@jeffreyhogueison8560]

very detailed clear explanation. thanks!

[@bernesebros7417]

I got both mods for my 500 ❤️

[@wyattmccain5015]

Hi Burch, do you still have the original smaller engine cage? If so, I’d like to buy it from you..Thanks!

[@jmiguel2443]

Does it void the manufacturer warranty??

[@norcross856]

Hey the link for the Exhaust Slider from Amazon isn’t working. Keeps saying can’t find page. Is there another website to buy them from that looks like these??

[@LifeOfBurch]

You can check the actual T-Rex website, but they’re out of stock frequently which is likely why the link isn’t working. They take them down when they’re out of stock. If you go to the website they have a spot where you can enter your email address to get an update when they’re available though!

[@Respatiwww]

can u mention it what kind of motorcycle exhaust frame slider that match with ur rebel.. i really looking for

[@themotorcyclemaiden9162]

Hey Burch, thanks for the videos, they really have helped a lot. I like the seat on the Rebel, looking for one myself. Where did you get it from? Thank you in advance.

[@LifeOfBurch]

So glad my videos have helped! I got this from a website called ZeedParts. Wasn’t super comfy, but looked great and didn’t cost an arm and a leg so I was happy!

[@steveholcomb1904]

Good Job, they look fine and now the bike can be dropped and be protected ($$)

[@novousrimor8139]

Nice work buddy, keep them coming... thanks

[@LifeOfBurch]

Thank you!! 🤘🏻

[@gretchitect]

does it fit the SCL500?

[@oligreendot]

where did you get that passenger seat?

[@B0M0A0K]

Great video dude, well done. If you put the bike over on it's right side do these guards stop the footrest and brake level from hitting the ground? No other CMX500 engine guard seems to offer protection to that right-hand footrest and brake lever.

[@deem6930]

I wonder if this fit a 2023

[@jamiehall2454]

Same

[@raddiemac]

the amazon links are not anymore working. do you have an updated link by chance? :)

[@LifeOfBurch]

Good catch! Here you go: Engine guard- www.t-rex-racing.com/2017-2021-Honda-Rebel-300-500-Engine-Guard-Cage-p/n27-18engineguards.htm Frame slider- www.t-rex-racing.com/T-Rex-Racing-Exhaust-Sliders-p/n50-13es.htm Looks like the only ones available on Amazon are actually more expensive than getting them through the T-Rex website directly.

[@raddiemac]

@@LifeOfBurch wow thanks for the reply! found them and already bought the same set! :) I actually need help on the specs of the spacer you used and if you can still find one on amazon, I'd really appreciate it! more power to your channel!

[@felipeclemente]

Do you recomend this bike for a beginner that wants to ride with a passenger?

[@LifeOfBurch]

I’d say it’s definitely one of the best beginner bikes out there, but for a passenger may only be best suited for short trips. I have a full review video of how it does with a passenger on my channel if you want to check it out! Should be the most viewed video right now.

[@felipeclemente]

@@LifeOfBurch Thanks a lot. I saw the video. Despite a few cons (view and bumping), it's it reasonable to say it's at least good for the passenger for a 4-5 hours trip?

[@felipeclemente]

I mean, for you, what you consider a short trip? I do not intend to cross the country (I'm a Brazilian Living in Mexico). But certainly I would like to ride to the coast, with takes around 4-5 hours

[@LifeOfBurch]

@@felipeclemente bro honestly I wouldn’t take someone else on this bike for 4 hours if someone paid me to do it 😂 When I say short trip I mean like an hour tops, not cruising above 50mph. Will it do more? Sure. But there are bikes way better suited for it that will keep you and your passenger more comfortable. MAYBE with upgraded suspension and a sissy bar it could be doable, but I wouldn’t know for sure.

[@felipeclemente]

@@LifeOfBurch Thanks a lot for your honesty. I'll keep following your channel.

[@Dronesingndrive]

What's the custom seat here?

[@somethingsomethang]

Have you ever considered getting crash bars for your 1100?

[@jimmytan1251]

Nice and informative video Bro. your back slider is it also a Trex slider? how much are they selling?

[@misterblack6803]

Mods are awesome. Will you be adding this type of mod to the rebel 1100? Would like a run down of the tools you use too. Only ask because I am looking for a frame slider solution front and back for my 1100 as soon as it arrives. Keep up the excellent work pal!

[@rjayor]

Hi will the engine guard work on a 2022 Rebel 500?

[@mariirenee97]

Some links aren’t working.. I’m new to all this and I want to add the sliders to the left side of my bike. What exactly did you use? Thanks!

[@LifeOfBurch]

The links usually come and go because T-Rex is constantly selling out and then restocking. The slider on the left is the same T-Rex exhaust slider as on the right, it just needs that spacer I mentioned.

[@mariirenee97]

Thank you!

[@marcialwiggins]

I see you live in Maryland do have a business where you can work on Rebel?

[@my2wheels]

Great job!!!!

[@LifeOfBurch]

Thank you!! 🙌🏻

[@my2wheels]

Question, can send the link where you get.

[@LifeOfBurch]

The links are in the description! Unfortunately, the engine guard is sold out right now, but on the T-Rex website you can request to have them email you once they’re back in stock. That’s what I did and about a week later they stocked them back up. They only stock less than 10 at a time from what I’ve seen though, so you gotta be quick!

[@haydenboyd7753]

Could you use the frame sliders as passenger foot pegs

[@acruz6112]

Great video! I had a question did you get a tune for that pipe? Would you recommend one or could you do without one?

[@LifeOfBurch]

Nope, no tune needed! The catalytic converter stays in place, so the computer is able to adjust as needed on its own.

[@mikeogden5256]

Push it over to see how good the crash bars work….

[@LifeOfBurch]

I literally lay it on its side at the end of the video…..

[@LifeOfBurch]

Unless you mean to actually drop the bike which is physically impossible due to the fact that I got rid of it in March lol

[@FreepalestineGimzo]

Where did you buy the saddle

[@dassix1636]

FYI, T Rex now offers black skid plates.

[@LifeOfBurch]

I saw that! It looks sooo much better!

[@ThisIsMeQ]

Looking to buy some guards for my Rebel 300 really soon. Awesome video :) For a relatively new rider, does this engine guard come in the way when you have to do an oil change or anything of that sort?

[@LifeOfBurch]

Thanks for watching! No, this won’t be in the way for an oil change 👌🏻

[@landonbeard254]

Would the crash bar also fit the 300?

[@michaelshelnutt1779]

Just bought a Rebel 300 (2020) and looking to add the frame sliders and engine guard - do you find the T-REX guard too big now that it is on? It seems that it is way too big - which made me thing I would want the smaller one - suggestions?

[@LifeOfBurch]

I actually like the T-Rex guard better now that it’s on, than I did just seeing it in pictures. It’s definitely bigger than the other guards, but offers sooo much protection so it’s worth it to me! No sense in having a smaller engine guard if there’s still the chance of your bike getting messed up if it falls over. Plus, if you’re looking at the bike from the side, the engine guard honestly just blends in since it’s all black anyway.

[@peteygnyc]

Links for the sliders dont work anymore. :(

[@michaelshelnutt1779]

Burch buddy... It looks like you installed the left side exhaust slider to a rear foot peg.... But there is no rear foot peg on a stock rebel. So no place to install that that second slider.... I got the exhaust side done and was about to get the next one but now it appears I can't install it without those arms... Just an FYI ☺️

[@adrianramos137]

Hmm I have a 2020 and ordered the left arm for the foot peg just so that I can install the left slider but the arm doesn’t have an area to install it on like yours does 😭 🤷🏽‍♂️

[@michaelshelnutt1779]

@@adrianramos137 I think thats why he ordered the rear seat - JUST to get that extra arm so he could install that slider - that guy is such a REBEL

[@adrianramos137]

Michael Shelnutt actually it looks like I got the wrong arm 😂 I got the main step instead of the pillion step holder 🤦🏽‍♂️ I might get the pillion step pair from Amazon but at this point I’m also fine with not having the left slider.

[@vulcanvandal]

What year 500 do you have? I'm planning on buying the 2020 model, but they don't seem to have the orange color available like yours.

[@LifeOfBurch]

Mine is a 2017, but started off gloss black. This color was only available in 2019 so I bought the new factory tank and fender and swapped them on. Here’s the video showing that! kzbin.info/www/bejne/rXTPZqpqlt2aiLM

[@vulcanvandal]

@@LifeOfBurch Awesome man thank you!

[@adventuretraveling8957]

Nice 👍 protection

[@NamPham-no4xl]

Spacer link doesn’t work can you send me a new link . I’m having same issue on left side

[@LifeOfBurch]

Ah dang. I don’t have a new link, but if it helps- the spacer is 3/4” outer diameter, 5/16” inner diameter, and 3/4” long. Forget if I said the specifics in the video.

[@NamPham-no4xl]

@@LifeOfBurch thanks so much for your response . I don’t much about parts I couldn’t find that in a store if my life depended on it lol

[@NamPham-no4xl]

@@LifeOfBurch can you help me find the same type of spacer? im horrible at looking for screws, bolts and such

[@ajalamcgregor9354]

Since you’ve had the seat for over 2 weeks now how is the seat holding up? Is it more comfortable than the stock seat and does it hold up for long rides and rain?

[@LifeOfBurch]

It’s holding up just fine. I’d say it’s more comfortable than stock solely based on the fact that it has more surface area and sits me up higher. It’s definitely a bit firm though. I’m fine after a 2 hr ride, but I never really do more than that. And I never ride in the rain. It doesn’t seem to soak up any water during washes though.

[@rooter05_39]

Where did you get that seat? Also, is it good on longer rides?

[@LifeOfBurch]

I got it from ZeedParts, but they aren’t the best. I had a bunch of issues. The seat is more comfortable than stock for sure, but a bit more firm than I prefer. If it doesn’t soften up after some use I’ll probably have a local shop add a gel layer to it or something like that.

[@TheGothicSunrise]

Would you happen to know if the ones you linked would fit the 2021 model?

[@LifeOfBurch]

Yes they will!

[@TheGothicSunrise]

@@LifeOfBurch sweet! Thank you!!

[@kennymarsters6388]

Any chance you have a link to the original guess you installed?

[@LifeOfBurch]

The original smaller one were just from eBay. I don’t have a link, but I just searched Rebel 500 engine guard and got the cheapest one lol

[@corygumpert]

What seat is that

[@rayjohnson6912]

Can you put these on a 2021 1100?

[@gabypleasant]

couldn’t open the links 😢

[@turtle19dad]

Hey Burch how do the crash bars affect your lean angle?

[@LifeOfBurch]

They affect it less than I expected! If you listen closely to the end of the video when I lay the bike on its side, you’ll hear a faint scrape as the foot peg first makes contact with the ground, and at that point the engine guard is still about 2 inches off the ground. In order for the guard to be touching the ground, the foot peg would be so folded up that your foot couldn’t even be on it anymore. The foot peg is the only thing that will make contact with the ground, and it’ll fold pretty much all the way up, then spring right back down when you lift the bike back up.

[@kataco21]

I tried to buy them from your link... out of stock 😢...

[@LifeOfBurch]

I appreciate that! Keep checking! T-Rex typically restocks within a couple weeks. When I got mine I had to wait 3 restock cycles because I kept missing it and then they’d sell out again 😭

[@RippinRy]

random question will this fit my 1100 ? great videos :)

[@LifeOfBurch]

Thanks man! No this won’t fit an 1100, BUT rumor has it T-Rex is in the process of making A LOT of stuff for the 1100 as we speak! 😳👀

[@Bunnyman89]

a curiosity... in Brazil An Engine Guard is called a "dog killer"

[@maxm3512]

How tough was it too loosen the stock bolts?

[@michaelshelnutt1779]

max, I just installed the exhaust side , took 5 minutes. The stock bolts were not tough at all.

[@chengsgroup2518]

what mind of seat is that ?

[@johntheaccountant5594]

Vlog is very good. I like the look of the front H2C engine guard more than the T-Rex Racing (too big) and do not like those frame sliders (sticks out too much). The T-Rex Racing are one piece so must be more functional and stronger than the H2C. The Honda Rebel must be one of the worst bikes for trying to do wheelies on.

[@bongiegeniston2019]

what is the exact color of your gas tank bro?

[@LifeOfBurch]

It’s called Candy Energy Orange! It’s an OEM color that only came on the 2019 model, so I swapped my original tank out to this one. Here’s the video of the swap- kzbin.info/www/bejne/rXTPZqpqlt2aiLM

[@yamaharider8014]

Women accessorize their clothing, we accessorize our bikes.👍😎

[@LifeOfBurch]

Haha truueee!

[@paul.aragon]

what was the original cage that you didn't care for?

[@dragonbrandon1995]

Not gonna lie when you always wear your protection I went to helmets not condoms

[@MrCODEmaster00]

You had to say get your mind out of the gutter before I even got the joke.. By the way, you had a dumpster behind you in the shot, could've said get your mind out of trash/dumpster

[@LifeOfBurch]

Damn I really missed the mark on that one 😂 I didn’t even think of that!

[@stevelee6667]

Sorry, these. bars are way too bulky for the rebel 500. not nice looking at all!