In this video we replace the old worn out factory installed magnaride suspension with brand new Fox shocks.
Пікірлер: 57
@funguy7979Ай бұрын
Have a 2016 escalade. I used the warranty I bought to fix thr shocks 3 times, all 4. Now my rears, which always seem to go first, have started up. Now my warranty is up and I want to put a 4-4.5 inch lift that won't push out my front wheels.
@robertvigdal9752 ай бұрын
I'm fixing to do my 18 denali with Fox up front, keeping the air in the rear and replacing old. Also, upgrading both sway bars and links with the Hotchkis kit. Everyone saying the sway bars make a world of difference, especially if you tow anything.
@richphippsgarage2 ай бұрын
For sure. Adding or upgrading your sway bar will definitely add stability. Good luck!
@jon_woodlandАй бұрын
can you provide links for the shocks and the plug in adapters? Having a hard time fronting just the front set up. Even called Magdelete and they only sell all 4 with the OBD2 adapter.
@brandonsmith4294Ай бұрын
Can you provide more information on the mag delete upfront? Did the system still work in the rear? I don’t want lights on in the dash..
@BALJITSINGH-ez4nk6 ай бұрын
Can you please provide part number? Did you remove the uper c arm ball joint?
@ivansandul74035 ай бұрын
Is there a set up for the 2011 escalade?
@elcompachito70537 күн бұрын
Would those shocks fit a 2015 tahoe ppv?
@Rod123585 ай бұрын
Awesome job you guys! I have a 2017 YUKON XL DENALI. My tires are bigger I believe 20 or 22 inch factory. Can I just buy new 18" wheels and tires before buying this front strutts? or keep the bigger ones ? you mentioned in your video the 18" tire wheel combo is a better option? thank you
@richphippsgarage5 ай бұрын
Thanks! Yeah swapping to the 18” wheels will soften up the ride due to the taller sidewall on the tire being better at absorbing bumps!
@theCHAD_official9 ай бұрын
Still have enough adjustment to get it back in alignment with the stock control arms now that its leveled? About to order all 4 corners Fox from magdelete to fix my Escalade for the 2nd time. First time replaced the magride, which are starting to fail again after 30k ish miles.
@richphippsgarage9 ай бұрын
Yeah it looked like we had plenty of adjustment left so you should be good as long as you are just looking to get it leveled out
@Daniel-fn3mg10 ай бұрын
Awesome video! Did you guys just do the front? Also where did you get the kit from?
@shawnpepper54010 ай бұрын
If you search your year and fox 2.0 upgrade, you'll see some options
@richphippsgarage10 ай бұрын
Yessir 👆this guy and I just did the fronts
@Daniel-fn3mg10 ай бұрын
@@richphippsgarage thank you both!
@TruckingandCars10 ай бұрын
Great video, I’m looking into these for my 18 Escalade…idk about having it sit that high though, I’d definitely want it lower in the front & throw a lowering kit in the rear to even it out.
@richphippsgarage10 ай бұрын
Thanks! Yeah they have tons of adjustability so you’ll be able to dial your ride height in exactly how you want it!
@joshbrady9385 ай бұрын
@@richphippsgaragehow do you adjust them?
@sergeymazhan84702 ай бұрын
Supper
@holybusiness96247 ай бұрын
I have a BellTech 2/4 drop on my RWD 2016 Escalade. What shocks would work best for my truck?
@shawnpepper5405 ай бұрын
for anything lowered I would recommend QA1, but belltech has there own shocks that they recommend.
@sduncan8132 ай бұрын
Did you get any check engine lights since you didn't connect the magneride wires back up?
@thegonz7833Ай бұрын
Will you get an answer, many want to know.
@dterrysj5 ай бұрын
My suspensions is squeaking and noisy. Bought the same kit, are you havi g the same issue?
@saturnsl219993 ай бұрын
You need to replace your swaybar linkage
@TheodoreRizzo9 ай бұрын
Would those fit 2016 gmc Sierra Denali and what’s the difference those and stock struts?
@richphippsgarage9 ай бұрын
Honestly not sure.. I imagine that the sierras have a different spring rate due to the different weight distribution between the trucks and the suvs.. the difference between the fox shocks and the stock magnaride shocks is that the fox shocks are statically valved specifically for your application whereas the magnaride system uses a variable viscosity fluid to dynamically change the valving of the shock based on driving conditions which is susceptible to a number of system faults over time.
@TheodoreRizzo9 ай бұрын
@@richphippsgarage thanks for the reply. Upon further research I think those will fit my Sierra they quiet pricey tho for the first time in 5 years have to replace parts on my Sierra not a big fan of lol
@jackiegenaro381410 ай бұрын
Where did you get the shocks from?
@richphippsgarage10 ай бұрын
Check out www.magdelete.com
@beatsbyry6 ай бұрын
You could do this on an Escalade of the same year then right?
@shawnpepper5405 ай бұрын
I believe the suspension is the same garbage magneride
@rudielsaenz9856 ай бұрын
What about the codes you get? Did you guys bypass it?
@shawnpepper5405 ай бұрын
no codes, but a follow up video should be coming.
@tedheath232628 күн бұрын
those trucks have maybe 3.08 gears , they are not towers ............ with 32" tires they should have at least 3.73 axle gears to be able to pull
@ramelstevens77264 ай бұрын
Hello great video👍🏽💪 i need part number and yall to put them on🤷🏿♂️ plllleeeaaasssee
@richphippsgarage4 ай бұрын
Thanks Ramel! Why let us have all the fun?!
@juanmadera813 ай бұрын
did you have to do a magneride sensor delete?
@richphippsgarage3 ай бұрын
Yup. I don’t think we showed it in the video but the kit had some dummy resistors that plugged into the factory connectors.
@beastmode1145 күн бұрын
Can we get a link?
@JR2U3 ай бұрын
Do the fox shocks ride better than the magneride
@richphippsgarage3 ай бұрын
They for sure ride better than magnaride shocks that are no longer functioning correctly! I’m not sure how they compare to a new magnaride set up. We went with the Fox setup because they are less expensive and less prone to failure.
@JR2U3 ай бұрын
I need to replace mine now. Thank you!
@trevorschneider90057 ай бұрын
What size are those tires?
@richphippsgarage6 ай бұрын
They are 275 65 r18
@user-mz3fw9mu5z3 ай бұрын
Why didn't you take the inner fender out and remove the strut ?? Much faster
@richphippsgarage3 ай бұрын
Well then it would’ve been too easy 😂.. lesson learned, next time that fender liner is coming out!
@phottomatt42025 ай бұрын
That right front would have been easier if you remove the wheel well liner and go in from the side.
@richphippsgarage3 ай бұрын
I have a bad habit of doing things the hard way! Next time that’s what I’ll do!
@jamesjudd65773 ай бұрын
about to throw in some new TRQ magneride ones. when new they are incredible. so gotta disagree problem is they last 50k
@richphippsgarage3 ай бұрын
Yeah I hear ya. That’s why we went with the non-magnaride Fox setup, seems like they are just less prone to failure.
@twowheelsforlife9 ай бұрын
Been easier if you have spent 1 minute dropping the wheel liner.
@richphippsgarage9 ай бұрын
Probably, but where’s the fun in doing it the easy way!?
@thegonz7833Ай бұрын
@@richphippsgarage Shit load of screws will take more than a minute