Installing Manual CCT 07 ZX6R *EASY/LAZY WAY*

[@steelcitycaprice.899]

Yesssir!! Great example my 06 10r needs one bad..Ebay here I come 👍🏽😎🏁🏁🏁Thanks Bro!

[@motolovevlog8512]

No problem man hopefully it gets rid of that annoying clicking sound for yah!

[@alanrossman89]

I recommend if anybody’s going to do this put your motor at top dead center

[@wonhokim3172]

My little sister owns a Ninja Kawasaki ZX-10R. It's a 2008, I think. But yeah! Your guy's bikes are nice.

[@wonhokim3172]

@@zxr-me6dk I'm not making fun of him. Everyone starts at a different cc bike due to their experiences with motorcycles. My little sister grew up riding dirt bikes & pit bikes. So no, I am not making fun of him mate and I'm serious.

[@zxr-me6dk]

@@wonhokim3172 dude idk what I said and deleted but it’s weird asf thinking this is the first time I’ve watched this then seeing a response to me

[@NickPissanu]

WOW!!!!!. Thank You.

[@timpazdernik7867]

I THINK I NOW OWN THAT BIKE

[@motolovevlog8512]

If you bought it from a guy in MN then probably you do 🤣 thats the last time i saw it as i sold it

[@javierarroyo9765]

Why didn't you take the fairing instead of pulling it back?

[@motolovevlog8512]

Lol like i stated in the vid, its my lazy way of doing it 😁

[@chadwickkaalekahi1819]

I wish i knew what the winding sound sounded like. I put the old cct back on after adjusting and the clicking went away but i don’t know what the winding noise sounds like cuz i bought the bike with rattle 😂

[@TDD23]

Life saver dude I’m doing one on mine right now! Any update how it’s doing?

[@motolovevlog8512]

Yeah give it a shot ! No sign of the ticking even coming back ever since I installed the Manual cct. I ride a lot to work and back and put 2k miles on my bike since this vid and it still runs great. just make sure to screw the main lead down till you make contact with your chain before starting motor to adjust to prevent chain from cycling out of place. Let me know how it goes!!

[@brandencastillo79]

If I new it was that easy I would of done mine along time ago I

[@motolovevlog8512]

@@brandencastillo79 i was really skeptic about it at first, but i hated the famous rattle as i stop at a stop light and the rattle noise is on par with my exhaust 😂

[@drew_174rhodes5]

Did your clicking or rattle directly correspond with the RPM of the motor, im buying an 07 and it has that issue but im worried it may be valves

[@motolovevlog8512]

It kinda was but it was more noticeable when u come and sit at a stop sign or red light. Thats when people look at u and say “something is wrong with ur bike” lol

[@zx_tommo1590]

hi mate, i noticed you didnt out a gasket or anything on it. have you noticed any leaking of oil?

[@motolovevlog8512]

zx_tommo as a matter of fact no, i just did a coolant flush and a oil change after. took off my fairings on both side during coolant maintenance and saw no sort of leaking, i am usually really annoyed if i notice any leakage and will trouble shoot it right away.

[@zx_tommo1590]

Moto Love #Vlog nice mate thank you! 🤙🏻

[@jasonwinter7534]

After doing this i went to crank my bike to adjust it and it cranked and made a bad noise and now will not crank. Probably bent valves, have no clue how this happened but im absolutely disappointed

[@motolovevlog8512]

I dont know how hard you did it but there is a possibility you probably had it too far down and it was tight. Thats probably why you had a bad sound, or maybe too loose and the chain in there that the cct press on came loose, not sure if you were able to find out whats wrong, but hope it is well.

[@alanrossman89]

Make sure your chains tight because it tightens your time in chain make sure there’s no slack in the chain I recommend doing it with your valve cover off

[@drake2692]

So I'm confused I have a 2008 zx6r which is the same model year as the 2007 when I go to ebay it says it doesn't fit my 2008 but will fit the 2007 I'm very confused

[@motolovevlog8512]

Is ur Cct located in the same place, i would say it should be ok because the 2007-2008 model dont look that different from eachother engine wise

[@drake2692]

@@motolovevlog8512 it is I bought it tried and out and made a horrible sound like metal on metal so I just put the stock on in and unscrewed the mounting bolts out a bit till it cleared up and fixed it

[@drake2692]

@@motolovevlog8512 if bought 2 different manual cct both for 2007-2008 zx6r and both made the sound I used to have a 2007 zx6r and had a manual cct and worked fine but doesn't on the 2008

[@motolovevlog8512]

@@drake2692 glad to hear you are able to fix it! I did try the backing out the mounting bolt on stock cct, but it slowly came back after periods of riding. Hopefully yours will stay away as i know how horrible it makes the bike sound

[@motolovevlog8512]

@@drake2692 did you try messing around with it by adjusting the mounting screw in and out on manual cct to see if it made any difference?

[@sosmotorcycles]

i just got an 07 zx6r and im starting to get the ticking sound, ive been reading people saying they regret putting the manual one on, how are you liking it?

[@motolovevlog8512]

I haven't notice any issues with mine ever since I put in the manual one, there is no sign of it coming back clicking and I added alittle over 2k miles onto my bike ever since this video. I can't speak for others, but maybe poor installation and adjustment or even cheap quality ones or etc? just make sure that when you do install the manual one in that 1. make sure you don't start your bike without screwing the center manual adjuster screw in. 2. make sure you screw the lead screw (Manual adjust screw) in to make contact with the chain so that it wont slap/ hop out of place when you do start it up to adjust...I did left mine kinda loose in the video which I screw it down quick lol:). I screwed mine just passed the clicking and kept it there since and never touched it. Still running great and happy with it. I can do a video on how it sounds up to date.

[@pelaoqleao]

Its the same on 2013 zx636???

[@motolovevlog8512]

don't quote me on it but each bike has a different type of manual cct made for it. I would say adjusting would be the same, but not sure about installation. sorry I couldn't answer you question :)