Installing The Cheapest Ebay Coilovers On My 2020 WRX

In this video I am Installing Rev9 Coilovers From Ebay. If I'm not mistaken these are made by Godspeed. There's 2 versions of these. "Hyper Street" and "Hyperstreet 2". I have the standard hyper street. HS 2 Has more adjustability on dampening and also has front camber adjustment. These were the cheapest coilovers I could find and I must say, for the price I can't complain. Only time will tell but I have high hopes for them.
My Instagram: @Streetlnspired
MOD LIST (Catagorized)
PERFORMANCE:
- Cobb Accesport
- Mishimoto Cold Air Intake
- Deatschworks 300c Fuel Pump
- Cobb Flex Fuel Kit
- Perrin TGV Deletes
- PRL EGR Delete
- Grimmspeed EBCS
- Grimmspeed FMIC
- Boomba BPV
- 1320 Catted Downpipe
- Single Exit 3" Catback
- Radium Dual Baffled Catch Cans
- Phatbotti Protune (E65)
- 372WHP/374lbft On Standard Map
- 403WHP/381lbft On Send-It Map
ENGINE BAY DRESS UP
- Perrin Fender Shrouds
- Perrin Radiator Shroud
- Perrin Pully Cover
- IBR Vacum Pump Cover
- Painted All Yellow Caps
- Custom Battery Cover
SUSPENSION/TRANSMISSION/Mounts
- Brembo Brakes (Factory)
- DSS Carbon Fiber Driveshaft
- Rev9 Coilovers
- Boomba Short Shifter Plate
- Perrin Shifter Bushings
- Perrin Shifter Stop
- Perrin Front Strut Brace
- Aluminati Solid Transmission Mount
- Aluminati Solid Carrier Bushings
- Torque Solutions Pitch Stop
- DFJ Short Shifter
- Weighted Shift knob
- Titan 15mm Spacers
- Cosmis FlowFormed XT206R 18x9.5+38
- Muteki Lug Nuts
- Dunlop Sportmax 245/40/R18
EXTERIOR & AERO
- Custom Painted Tail Lights
- Custom Painted Fender Badges
- Custom Painted Rear Emblem
- Window Tint 20%
- Vortex Generator
- STI Spoiler
- Perrin Spoiler Stabilizers
- Perrin Front Plate
- S207 Rear Bumper Vents
- S209 Fender Flares
- OEM Style Front Lip
- OEM '20 STI Fog Bezels
- Bayson R Front Grill
- OEM Style Rain Guards
- OEM Style Turn Signal Mirrors
INTERIOR
- Recaro Seats (Factory)
- JDM Leather Shifter Trim
- OLM Carbon Dash Trim
- OLM Carbon Shifter Trim
- Accesport Vent Mount
- Suede Wrapped A-Pillars
- Customized OEM Shiftknob
LIGHTING
- Vland Headlights
- Diode Dynamics Tail/Turn Module
- Diode Dynamics Smart Tap Relay
- Diode Dynamics Reverse LEDs
- Diode Dynamics LED Tag Lights
- Diode Dynamics Interior LED Kit
- Red LED Strips (Under Dash/Seats)
- JDM Rear Fog / 4th Brake Light
- Alpena LED Underglow
- Alpena LED Engine Bay Lighting
OTHER
- Made Side Fender Vents Functional
- Made Rear Bumper Vents Functional
- Perrin Hella Horn Bracket
- 6 Hella Horns (2 visible, 4 hidden)
- Urethane Exhaust Hangers (Raises Stock Muffler 2" to fill gap)
- Perrin Window Vents
- Custom Painted Shift Knob To Match Seats
- Custom Painted Pinstripes On Carbon Dash Trim To Match Seats

[@MoJoNinjaGarage]

Goes to show you don't have to spend a ton on s name and still get good product. Glad it worked out big dawg!

[@neliusvantonder3607]

We need another vid of you just ripping the car 🙏🏻🔥

[@ThatSubieDude]

I have been rocking them for about 4 months. No real major issues…..yet lol

[@englear-ak8333]

I had them on a 08 civic si loved them! My buddy has them on his mk7 Gti also loves them

[@samdavis1228]

I was laughing when he said you can adjust the spring rate with the knob, then when he matched the length with the OEM unit I was done. 😂

[@StreetInspired1]

Glad I could make you laugh from my lack of knowledge on coilovers 😎

[@Jonnydriller]

He said I lifted it.. lol that was great. Cars looking good 👍🏾

[@Doublebarrelinmymouth]

how low will they go

[@D3ad289]

2 years late, but how did they hold up over time? (I don't need anything yet but I've been looking into options sooner rather than later)

[@nabaddame5726]

Next mod..weld the center diff and make it rwd!!! Be the first on the VA chassis that I know of.

[@StephenJZ]

How have the Coilovers been holding up my man? How do they feel daily driving

[@StreetInspired1]

They're okay. I wouldn't say they suck, I would say they're great. I will say for someone who wants a lower ride height for daily driving they're not bad for the price. My complaint after driving with them for a while is they don't feel very great going through corners during spirited driving. The car feels slightly loose and unpredictable no matter where I set the settings. I would say if you're dailying the car they're good, but if you track your car or go for lots of spirited drives you may be slightly disappointed.

[@TheVantage2012]

Beautiful sounding engine. What stage is your car in?

[@StreetInspired1]

Thank you. I don't really go by stages lol mod list is in the description if you're interested though!

[@kiron800]

great vid, wondering I have a 21 wrx and I don’t get what VA1 or VA2 stands for, ebay says they wont fit my 21 wrx and I just want to make sure they do fit, sorry for my ignorance lol

[@TheFlyShift]

If I’m not mistaken V stands for wrx/sti , A is for sedan, 1 = FA20 , 2=EJ257

[@sses12]

Hey man, did you ever finding a good spacer size? Or did you end up getting bigger tires and or did you roll your fenders? Any update on it? I want to get spacers on my STI while keeping it stick (being the tires, wheels and height)

[@StreetInspired1]

Well, I only ever rubbed in the rear. I switched from 20mm to 15mm and the rubbing got cut down by about 70% but when I hit hard bumps it would still rub. I rolled my quarter panels and that might have helped a little bit but they still rub. I'm going to lift the back of the car until it stops rubbing and hopefully it doesn't look like a monster truck lol

[@sses12]

@@StreetInspired1 Thank you so much for the info. A lot of us STI and WRX owners really appreciate these kinds of videos so that we get an idea of what it’s like to modify these things. Always appreciate the speedy replies too, keep up the good work brotha!

[@gislasson]

thats so cool cheers from venezuela

[@StreetInspired1]

Thank you!

[@dauntlessg4ming]

After 2 months, how are they holding up? Would you suggest these to others wanting to jump in with Coil Overs?

[@StreetInspired1]

I already replaced them. I would say they're okay for flat roads but they were really bouncy in my area going over bumps and stuff. (Not stiff bouncy, but too soft bouncy)

[@dauntlessg4ming]

@@StreetInspired1 I saw that shortly after posting my Q. Thanks for getting back to me. I wouldnt want to give up cornering stability on my Veloster.... I'll stick to the Eibach Pro Kit Springs until I fork out the cast for GOOD coil overs.

[@romariosmith422]

What flares are those?

[@StreetInspired1]

kzbin.info/www/bejne/mJmsf2l7drmgiKs

[@Bang_n_slang]

Update ?

[@StreetInspired1]

They weren't terrible for the money, but they weren't the best. I ended up swapping then out for a set of silvers coilovers.

[@maryburgess9293]

no baby no....i need to get you some silvers neomax

[@StreetInspired1]

That would be a nice setup!!