iPad 9 10.2 2021 LCD Display Touch Screen Replacement

[@CrystalBaker-v7q]

Question...what is the name of the 2 small pieces located by thr home screen?

[@LinjaRai]

​ @Taptic Digital hey dude, the screen works absolutely fine but as soon as i unglue the side ribbons and stick it to the screen, only my half of the screen is responding. i replaced everything and my 1 2 3 number on keypad doestn work :(

[@TheDoctor50]

How do I fix phantom touch issues and inconsistent touch response on the new glass and digitizer after installing?

[@yomurita]

either you connected the connectors wrong, or its faulty

[@EsterBio]

please, could you help me? where could i buy a high quality lcd+touch for ipad A2602? And that delivered to Brazil.

[@user-merabi]

hoh

[@LightingMcQueen-]

Hey I've broken my iPad screen but I wasn't know if I can use the LCD like a screen and touch and move like it's fully functional like a normal iPad screen

[@DIYGeardo]

I am little confused.But you can fix your iPad if it has a broken screen or touch.then it can be normal

[@LightingMcQueen-]

@@DIYGeardo like the LCD inside of the iPad is it like touch screen

[@karlismymiddlename]

No it's not

[@dagmactube]

hello, great video. it use the same digitizer that the iPad 7 and 8?

[@DIYGeardo]

Yes it does

[@Mr.Morkovkaa]

not the same,there is no holes for true tone on each side on the top of ipad 7,8 digitizer

[@ssdwssd8030]

@@Mr.Morkovkaa Is it normally compatible except for true tone function?

[@massimoscipioni8434]

What about the screen protector on the lcd side? Does it need to be removed?

[@formelee8886]

good guide~~~ Thanks!

[@DIYGeardo]

Glad it was helpful!

[@raynasnow79]

question, what do you do if you break the clip that holds the lcd screen connector to the board?

[@DIYGeardo]

Solder a new one

[@Meczox]

One question, o you not need to interrupt the battery before changing the digitizer?

[@DIYGeardo]

Yes it is good practice. But in some iPad models, there is no actual connector plug. In this model there is a screw, but needs to lift and loosen the logic board. Which is little complicated for a screen repair. Better work with anti static board to minimize any issues. Some may not agree and some will. Always turn off the device prior to repair.

[@weirdweebster]

how much would it cost to fix one like having best buy fix your screen

[@DIYGeardo]

Touch Screen or Display, there are two parts in iPad 9..

[@edzgraphics5448]

Can I use the Ipad 7 or 8 digitizer and screen?

[@DIYGeardo]

Yes

[@juanmacedo2239]

@@DIYGeardo but how about the front camera hole?

[@computarman]

I order cheap digitizers from Ali and they break easily, would your parts be closer to OEM?

[@DIYGeardo]

Yes..

[@Toysourboy]

I've been searching up videos for so long and have not found an answer. Is it possible to make touchscreen digitizers like the iPad Pro 120hz as a touchscreen monitor with the 120hz feature? I haven't gotten an answer but I really need one for 120hz and SPECIFICALLY touchscreen. I play a lot of rhythm games and need faster reaction time when using touchscreen and I need it for PC.

[@Chubaddie]

no

[@emmanuellamartins5380]

Display ipad 6 ou iPad 7 serve no iPad 9 ..??

[@midas70050]

My iPad 9 gen touch screen crack only do I need to change the display too?

[@DIYGeardo]

No only the touch glass is enough..

[@midas70050]

But bro they said LCD and touch screen are come together

[@facttechztherealhero5854]

Bro kya kiya appne mera v toot gya ha touch

[@midas70050]

@@facttechztherealhero5854 maxbhi se order kiya tha maine touch screen ab thik ho gaya mera 3k total cost

[@facttechztherealhero5854]

@@midas70050 please

[@kvin51]

What’s all the heating for?

[@DIYGeardo]

to remove the screen

[@pedrocamara7671]

And does the pen still work after the replacement

[@DIYGeardo]

Yes, Make sure to get a quality part

[@burtfiasco]

If the lcd screen still works and responds to touch fine but the glass is shattered can you just replace the glass or do you have to replace the digitizer too?

[@DIYGeardo]

Well, Digitizer and glass come together. Unlike most of the new iPad, this is not a LCD and Touch Assembly. So you can easily replace the touch digitizer glass.

[@roborat2000]

The tape cover for the button connector was completely forgotten and it was still sitting by the side when the new screen was mounted :D

[@azizchamadiya3868]

Nice video brother I want change my iPad screen also can you please tell were I will get the secreen ?

[@DIYGeardo]

You can find online..

[@yourpeacemusic]

Can I use a blow dryer

[@DIYGeardo]

Yes you can

[@lalayvlog765]

can u tell me if how much the touch screen replacement for ipad 9th generation? this 2022

[@DIYGeardo]

Is your display is working fine?

[@BoardPrep2.0]

@@DIYGeardo yeah… same problem. Display is working fine. But outer screen digitizer is broken

[@vioarz]

hi i have a problem my screen kinda glitches and will either press random buttons or not press what im pressing did i connect something wrong?

[@DIYGeardo]

Make sure connections are fine, if not something wrong with the replacement unit. You need to install new one to verify it.

[@sardonyxmanner3846]

Is it compatible with the 7th generation

[@DIYGeardo]

Lcd or touch?

[@sardonyxmanner3846]

@@DIYGeardo screen digitizer

[@DIYGeardo]

@@sardonyxmanner3846 it can use, but there are two sensors in iPad 9 for true tone. It is not in iPad 8 and 7. Better to use iPad 7 digitizer

[@tuffbeard]

Why you didn’t take the screw out that’s holding the battery in?

[@DIYGeardo]

Well yes it is good if you can undo, but it may not disconnect the battery from the board. Still the pins can holds together unless you raise the board.

[@mdazmath8057]

Ipad 7th 8th 9th same touch screen or different touch screen

[@DIYGeardo]

Technically all 3 are same. But iPad 9 has two sensors for true tone.. Pretty soon we Will try to get you a video on the compatibility..

[@kirozbrz]

Legendary

[@DIYGeardo]

Thanks 🙏

[@onewwish4217]

Hi i want to ask when i try to take out ldc cable there is spraked and now i can't switch on the ipad. Is there any solution

[@DIYGeardo]

you mean charging cable right? was it a original cable?

[@onewwish4217]

@@DIYGeardo no is not charging cable but the lcd screen cable when I plugged out, some sparkle came out

[@DIYGeardo]

@@onewwish4217 Were you repairing? if you got sparked, probably there is an issue with the board. Most likely you have burned some ic's. You need to check with a board-level technician.

[@onewwish4217]

@@DIYGeardo thank u for your reply and information

[@onewwish4217]

@@DIYGeardo thank u for your reply and information

[@6apa6aw72]

after replacing touchscreen not working auto brightness, is it ok? But true tone is working

[@DIYGeardo]

That is something new.. I mean for us..auto brightness not working after touch screen or lcd replacement?

[@6apa6aw72]

@@DIYGeardo touchscreen

[@Galaxy-97]

my touch id isnt responding after repair how can i fix that?

[@DIYGeardo]

What is the Part you got? touch screen or touch screen assembly

[@Galaxy-97]

@@DIYGeardo the whole thing. it kept ghost touching so i sent it back due to a defect with the screen

[@i_mmm_u]

If i want to replace just the front glass how much it will cost??

[@DIYGeardo]

I think the front glass is about $30-50

[@i_mmm_u]

@@DIYGeardo where can i buy original piece bro....as apple service center they wont give

[@ronniecampbell33]

I wish you can fix my screen I clean my tablet this same model with windex and it crack my tablet real bad and I still upset cause I can’t get minds fix and don’t no nobody that do screen replacements in my city of Birmingham Alabama and by the way I love your channel😀

[@DIYGeardo]

Probably you have applied extra force to the device.i understands how you feel. That is strange, repair shops do tablet repairs. How about trying a mail in service centre? Thanks for watching our videos. If you need any assistance, let us know.

[@ronniecampbell33]

Okay thanks

[@raesplaysandreviews]

You missed a vital step in the repair, sir. You forgot to remove the screw for the battery and didn't block it before undoing the flex

[@DIYGeardo]

Thank for your feedback..Will update that..Thanks for your contribution..

[@mymobilellc4798]

and he also didn't put the piece of tape back over the home button flex connector

[@reacew7624]

And he didnt put the tie down plate bacl on

[@tylercecil93]

Or the old screen

[@bellslinki]

I guess home button is not like iphone. You can use a replacement button and still have full functionality??

[@DIYGeardo]

Yes, but maybe without the touch id..

[@TheGYR1]

Very helpful. What do I do if one of the screws is stuck with the black silicon?

[@samanthabroadway2291]

I know where some headphones are can I get them for you for tomorrow morning? Guys are just the weather for todays

[@ketiel1995]

Hello, great video! I live in the UK and I can't seem to find a certified screen, I even tried the shop on your description. Could you recommend any shops?

[@DIYGeardo]

Sorry for the delay.. The issue with iPad screens are very hard to find full originals. But there are good OEM replacements, even in our Uk store has some good ones.. But also you can find in other places too. Just check with them..

[@Jaswantsingh12121]

Where I buy this screen

[@DIYGeardo]

Your location?

[@facttechztherealhero5854]

Sir india

[@fgzthrftstr]

Hey dude, after change lcd, does this ipad got true tone back?

[@DIYGeardo]

Yes.. make sure to get the right part. Do you have it?

[@Galaxy-97]

and the calibration is off center

[@Uh-huh-uh-huh]

Tried it, and wish I had paid the $150+ to have a pro do it, and do not recommend even thinking trying this at home. If your screen is cracked, which it most likely is, removing it is much, much harder as it will crack even more and all the glue and tape is crazy hard to remove. All the other stuff is much harder than it looks. Unless you're a pro, just have someone who knows do it, or you'll be like me buying a new iPad now. Grrrr. (otherwise, great video for someone who's good at this sort of thing)

[@DIYGeardo]

Thanks for your feedback..yes it depends on the person and also sometimes device too.

[@ghettotech9617]

good guide

[@DIYGeardo]

Thanks

[@stevens4689]

What heating pad are you using and what temperature?

[@DIYGeardo]

ABout 80-100c will be good...

[@stevens4689]

@@DIYGeardo I have thought about using the heated bed on my 3d printer to do this.

[@nellyf9497]

so how much does it cost to replace? for ipad 9 LCD screen, its just the glass thats broken, everyhting else is fine.

[@DIYGeardo]

The glass is around $20-30, repair charge will depend on the location

[@michag5561]

Nooooo waaaaayyyy!😮

[@DIYGeardo]

Thanks for your feedback..

[@django1364]

this video gives the viewers the wrong idea in believing that it is easy to removed the touch screen, it is very easy to cut the touch screen cable and the home button cable. If you follow this video you will definitely cut through the cables. Viewer Please view another video if you want to safely remove the touch screen without cutting the ribbon

[@DIYGeardo]

Please note this is a complex repair and a little more care should be taken when removing the cables.