iPad Air 2 Digitizer Only Replacement

New video here: • iPad Air 2 Glass & Dig...
www.Tech-MD.com Join our team and become a tech:
www.tech-md.com/#!work-at-home...
Need to get a part from a reliable quick source, you'll find a better price here then Amazon and the quality will be a lot better. Click on the link below.
www.injuredgadgets.com/?acc=b...
Use this coupon code: TWPD and It will take 3% off your first order.
TWPD

[@drakesakura8718]

Best video of screen replacement yet.

[@FilmFactry]

Followed your instructions. No special tools. I've never done this before. Success!

[@stuartm4339]

Just got mine in the mail today. kzbin.infoUgkxhcEDB3r-OJ3_X5hQzr7k1ZofTQy1ao_U The corners of the box was a little smashed but I think that’s more of the shipping’s fault. iPad was in perfect condition though. I ordered the yellow one thinking it was going to be a bright vibrant color. Instead I looks like more of a Gold color. I personally prefer the gold look. Definitely not disappointed but just a heads up to the ones expecting a brighter cream of yellow.

[@nmorris7647]

I like you dude, nice to see a down to earth, honest guy. Great video!

[@nerdworld8211]

And this is exactly why i stopped repairing these, what a PITA!!!!

[@matthewyabsley]

If anyone else is thinking about doing this bit yourself some valve clearance adjusters. You’ll save yourself the pain of butchering all the glass into pieces, they just slide down the back of the glass without breaking the glass.

[@PDPAINRETURN]

amazing I like it, you don't know what you are doing but you are doing it!

[@lukepenner9478]

What kind of flux and solder do you use? you made that look really easy!

[@johnpartridge5348]

While ESD is not critical while working on ipad or other electronics in general, it is critical during handling of main boards, PCBs and memory.

[@jotal6041]

great ,part two pl.. so i can attach the new digitizer to the lcd

[@medic8619]

i like your mistake videos because it shows what we would go through

[@gamingexpress2549]

Awesome video man

[@LSD209]

To anyone reading, it goes without saying that haters will hate and most people are aware that haters are essential to maximizing views; what is decreasing, is some people's ability to distinguish between the haters and those whom take the time to offer what is called " constructive criticism". It seems to be rare nowadays that you'll find appreciation for such an act, which I have no problem with but to be labeled a hater when you're actually just criticizing in a way that offers potential for improvement is frustrating.

[@srs_lol]

Totes respect for you awesome video😁😁

[@GeorgetteSoule]

can you try guitar string or fishing line instead of the "string" tool?

[@user-ts8ql4ug7p]

what did you use to do that? specifically about that thread!

[@MaCJaX88]

I like my ipad well done please. Thank you !

[@BlazinThaChronic86]

You should have started from top to bottom when separating the digitizer from the LCD.. just a thought..

[@WestSideJooo]

What is that watch you use? Seems nice

[@432cdu]

you could put mylar or a guitar pick under battery connector without removing it. Just slide under starting from battery side. obviously using great care and a steady hand! so many videos don't show it all, good job even tho bit wrekless for my liking. I tried one samsung phone part cost over 200, I had it completed accept for a corner sticking up, I gently pressed down and the screen broke! forget ever doing those again! may have been simple fix if screen didn't break but not worth happening twice..... anyway thanks for the vid, now I know what i am getting myself into

[@coolrich8781]

😂😂😂😂

[@bmctelecombd]

thanks

[@robfassi3297]

Did it end up working?

[@PARADACARDIACAGAMES]

hi do you know what is the litte pc, u use soured, the thing u put hot metal do put together u know what is that?

[@sal5233]

is soldering necessary or can it be done without it

[@erenaltin8258]

Hi what s it name to help this machine giving hot air to ipad?

[@mcdradus]

we all have to learn sometime.

[@jon199680]

If you looked at the iFixit teardown, you would know that the battery has spring connectors under the logic board.

[@serudesuga1018]

is the lcd and touch screen of ipad air 2 fused?

[@TechMDYoutube]

New video here: kzbin.info/www/bejne/jmncdKGdYs54mLs&lc=z12hd1nx0xmuzr0zh04cihgr5xv4ibqzxts0k

[@MsDeathGuy]

can i put mine in the over at 100 degress and get it over with?

[@SupaPoopaScoopa]

Hi Mr Tech, Do you have any idea if a IPad Pro's digitizer can be replace while keeping the lcd?

[@Bluntzee]

Typically an iPad's digitizer is a separate component from the LCD itself so it is doable.

[@brianmills2729]

you need a silicone matte for your machine it seals it to the glass and holds the suction

[@TechMDYoutube]

where do I get that?

[@brianmills2729]

+Tech MD KZbin - I got mine from DHGate. You should be able to get it from the place you got your machine.

[@MediaFuser]

What happens between 12:00 and 1:00 Dustin? is that when you eat? :)

[@AndrewMooreJ]

To adjust the suction strength on the vaccuum pump, open it up and use a ceramic driver on the trim pot while the vacuum pump is on and you will hear the difference as you VERY SLOWLY turn the pot. Note: The pot is on the PCB encased in the metal with the holes. Hit me back if you need more help on this. I fix these chinese pieces of shit and mod them out to be much more accurate adding higher quality ceramic heating elements and TC's. Its important to have 2 to 3 TCs placed under the plate connected to a digital thermemeter to get the exact temps on the heat plates in different areas. There is only one TC (thermalcouple) on the big plate and the temp reading comes from that spot only.

[@zaheerwarraich84]

you don't have to disconnect the battery.there are connectors underneath mother board who connect with battery flexy when you tight the screw.so don't struggle

[@TechMDYoutube]

+Zaheer Warraich Ah yes thanks for the comment good to know in the future.

[@zaheerwarraich84]

+Tech MD KZbin its only my pleasure...i also learnt alot from you...of you wana know anything i know you can email me gladly.....

[@chrisconlon7970]

The phones are bloody easy to do.... Tablets are a lot harder and take much longer . Tip !! .... Wear safety glasses. I have done loads but one piece of glass in the eye and you will wear safety glasses all the time for this job.

[@ErCellutions]

Great video ! Your like a mad scientist I love it, someone's gotta have the ba*^s to get in these devices

[@TechMDYoutube]

Lol thanks and I have a newer video that shows you everything

[@vinniepooh]

I have a question: Once You separate the digitizer from the LCD, what about after??? Could we pool out the LCD and the digitizer without glue? Could we close the iPad in this way as it is on iPad Air for example? Is this possible? Or we have to put glue and to be as a brand new screen and everything to be together?

[@stivenson200]

You’ll need an OCA glue/film

[@vinniepooh]

@@stivenson200 Could You point me please what I need exactly? Please, share link where to buy and how to looking for this product in the inet. Only to look like OCA glue/film?

[@stivenson200]

@@vinniepooh once you’ve separated the screen(digitizer) from the LCD. highly recommended to use a product called OCA remover 8333 it’s a liquid like that will remove the old adhesive and is made for LCDs. Then you’ll have to apply the new OCA film, this can be found in AliExpress NOK 244.72 | OCA Glue Adhesive Double For iPad Air 2 LCD Screen 9.7 Inch 250um Thick Film Replace 5/10/15Pcs/Lot a.aliexpress.com/_m0pQYat then place the Digitzer back on the top

[@stivenson200]

@@vinniepooh see this video for clear steps. kzbin.info/www/bejne/rHSVfWSYhtySmZI You won’t need the debobbe machine it’s optional step as long as you place the OCA film On without leaving bobbles.

[@saamgolmoradi1192]

+Tech MD KZbin I'm a teen and I was wondering if i can join your team I'm good at repairing and doing all sorts of crazy stuff

[@TechMDYoutube]

+Saam Golmoradi 18+

[@iScott78]

Did you scratch the shit out of the back or was it already like that?

[@jlazore]

I was wondering the same thing. All the glass on the cutting board and sliding the ipad around on top of it.

[@hankzheng1194]

part2 master

[@TechMDYoutube]

Hank Zheng Ha not sure if I will release part 2. ^_^

[@srs_lol]

+Tech MD KZbin how comes 😢😅😁😆😝

[@ToknHaze]

+DKIDSherry probably killed the backlight :)

[@TechMDYoutube]

Part 2 will come soon.

[@jdeere1837]

Where is part 2 ? Or was this a failure?

[@rafalosip8025]

How did you glue the LCD with digitizer together

[@TechMDYoutube]

Tesa tape or t7000

[@janetsmith4660]

who care if he is using what ever for all I care he can be using a fork and a nice what matters is that he get it fix

[@Armpit123]

Same amount of likes and dislikes

[@bmctelecombd]

i invite you

[@gb007coc8]

lOl u just Rekt it

[@hankzheng1194]

whatever, just release more more VDs ha.. likes

[@paulwhite8995]

R

[@user-wg4ic1ll7x]

Спасибо за хорошее обучающее видео. Разместили ссылку на этот ролик на сайте о ремонте телефонов в Перми sot59.ru/iphone-remont-v-permi.html

[@TechMDYoutube]

+Ремонт телефонов в Перми Спасибо, я не даю ссылки сайта на мой канал на KZbin , если вы не присоединиться к Tech MD. Вы хотите быть первыми в России ? Также вы можете скайп меня в [e-mail] Спасибо за добрые слова !

[@hankzheng1194]

business secret？ HA

[@JuXuS1]

nice vid - but what a piece of shit consctruction. shame on you apple. i fixed it on an ipad air 1. i assume apple didnt like it was to easy.